/*
 * FreeRTOS Kernel <DEVELOPMENT BRANCH>
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

#include <xc.h>
#include <sys/asm.h>
#include "FreeRTOSConfig.h"
#include "ISR_Support.h"

    .extern pxCurrentTCB
    .extern vTaskSwitchContext
    .extern vPortIncrementTick
    .extern xISRStackTop
    .extern ulTaskHasFPUContext

    .global vPortStartFirstTask
    .global vPortYieldISR
    .global vPortTickInterruptHandler
    .global vPortInitialiseFPSCR


/******************************************************************/

    .set  nomips16
    .set  nomicromips
    .set  noreorder
    .set  noat

    /***************************************************************
    *  The following is needed to locate the
    *  vPortTickInterruptHandler function into the correct vector
    ***************************************************************/
    #ifdef configTICK_INTERRUPT_VECTOR
        #if (configTICK_INTERRUPT_VECTOR == _CORE_TIMER_VECTOR)
            .equ     __vector_dispatch_0, vPortTickInterruptHandler
            .global  __vector_dispatch_0
            .section .vector_0, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_1_VECTOR)
            .equ     __vector_dispatch_4, vPortTickInterruptHandler
            .global  __vector_dispatch_4
            .section .vector_4, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_2_VECTOR)
            .equ     __vector_dispatch_9, vPortTickInterruptHandler
            .global  __vector_dispatch_9
            .section .vector_9, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_3_VECTOR)
            .equ     __vector_dispatch_14, vPortTickInterruptHandler
            .global  __vector_dispatch_14
            .section .vector_14, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_4_VECTOR)
            .equ     __vector_dispatch_19, vPortTickInterruptHandler
            .global  __vector_dispatch_19
            .section .vector_19, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_5_VECTOR)
            .equ     __vector_dispatch_24, vPortTickInterruptHandler
            .global  __vector_dispatch_24
            .section .vector_24, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_6_VECTOR)
            .equ     __vector_dispatch_28, vPortTickInterruptHandler
            .global  __vector_dispatch_28
            .section .vector_28, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_7_VECTOR)
            .equ     __vector_dispatch_32, vPortTickInterruptHandler
            .global  __vector_dispatch_32
            .section .vector_32, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_8_VECTOR)
            .equ     __vector_dispatch_36, vPortTickInterruptHandler
            .global  __vector_dispatch_36
            .section .vector_36, code, keep
        #elif (configTICK_INTERRUPT_VECTOR == _TIMER_9_VECTOR)
            .equ     __vector_dispatch_40, vPortTickInterruptHandler
            .global  __vector_dispatch_40
            .section .vector_40, code, keep
        #endif
    #else
        .equ     __vector_dispatch_4, vPortTickInterruptHandler
        .global  __vector_dispatch_4
        .section .vector_4, code, keep
    #endif

    .ent        vPortTickInterruptHandler

vPortTickInterruptHandler:

    portSAVE_CONTEXT

    jal         vPortIncrementTick
    nop

    portRESTORE_CONTEXT

    .end vPortTickInterruptHandler

/******************************************************************/

    .set        noreorder
    .set        noat
    .section .text, code
    .ent        vPortStartFirstTask

vPortStartFirstTask:

    /* Simply restore the context of the highest priority task that has been
    created so far. */
    portRESTORE_CONTEXT

    .end vPortStartFirstTask



/*******************************************************************/

    .set  nomips16
    .set  nomicromips
    .set  noreorder
    .set  noat
    /***************************************************************
    *  The following is needed to locate the vPortYieldISR function
    *  into the correct vector
    ***************************************************************/
    .equ     __vector_dispatch_1, vPortYieldISR
    .global  __vector_dispatch_1
    .section .vector_1, code

    .ent  vPortYieldISR
vPortYieldISR:

    #if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
        /* Code sequence for FPU support, the context save requires advance
        knowledge of the stack frame size and if the current task actually uses the
        FPU. */

        /* Make room for the context. First save the current status so it can be
        manipulated, and the cause and EPC registers so their original values are
        captured. */
        la      k0, ulTaskHasFPUContext
        lw      k0, 0(k0)
        beq     k0, zero, 1f
        addiu   sp, sp, -portCONTEXT_SIZE   /* always reserve space for the context. */
        addiu   sp, sp, -portFPU_CONTEXT_SIZE   /* reserve additional space for the FPU context. */
    1:
        mfc0    k1, _CP0_STATUS

        /* Also save s6 and s5 so they can be used.  Any nesting interrupts should
        maintain the values of these registers across the ISR. */
        sw      s6, 44(sp)
        sw      s5, 40(sp)
        sw      k1, portSTATUS_STACK_LOCATION(sp)
        sw      k0, portTASK_HAS_FPU_STACK_LOCATION(sp)

        /* Prepare to re-enabled interrupts above the kernel priority. */
        ins     k1, zero, 10, 7         /* Clear IPL bits 0:6. */
        ins     k1, zero, 18, 1         /* Clear IPL bit 7.  It would be an error here if this bit were set anyway. */
        ori     k1, k1, ( configMAX_SYSCALL_INTERRUPT_PRIORITY << 10 )
        ins     k1, zero, 1, 4          /* Clear EXL, ERL and UM. */

        /* s5 is used as the frame pointer. */
        add     s5, zero, sp

        /* Swap to the system stack.  This is not conditional on the nesting
        count as this interrupt is always the lowest priority and therefore
        the nesting is always 0. */
        la      sp, xISRStackTop
        lw      sp, (sp)

        /* Set the nesting count. */
        la      k0, uxInterruptNesting
        addiu   s6, zero, 1
        sw      s6, 0(k0)

        /* s6 holds the EPC value, this is saved with the rest of the context
        after interrupts are enabled. */
        mfc0    s6, _CP0_EPC

        /* Re-enable interrupts above configMAX_SYSCALL_INTERRUPT_PRIORITY. */
        mtc0    k1, _CP0_STATUS

        /* Save the context into the space just created.  s6 is saved again
        here as it now contains the EPC value. */
        sw      ra, 120(s5)
        sw      s8, 116(s5)
        sw      t9, 112(s5)
        sw      t8, 108(s5)
        sw      t7, 104(s5)
        sw      t6, 100(s5)
        sw      t5, 96(s5)
        sw      t4, 92(s5)
        sw      t3, 88(s5)
        sw      t2, 84(s5)
        sw      t1, 80(s5)
        sw      t0, 76(s5)
        sw      a3, 72(s5)
        sw      a2, 68(s5)
        sw      a1, 64(s5)
        sw      a0, 60(s5)
        sw      v1, 56(s5)
        sw      v0, 52(s5)
        sw      s7, 48(s5)
        sw      s6, portEPC_STACK_LOCATION(s5)
        /* s5 and s6 has already been saved. */
        sw      s4, 36(s5)
        sw      s3, 32(s5)
        sw      s2, 28(s5)
        sw      s1, 24(s5)
        sw      s0, 20(s5)
        sw      $1, 16(s5)

        /* s7 is used as a scratch register as this should always be saved across
        nesting interrupts. */

        /* Save the AC0, AC1, AC2 and AC3. */
        mfhi    s7, $ac1
        sw      s7, 128(s5)
        mflo    s7, $ac1
        sw      s7, 124(s5)

        mfhi    s7, $ac2
        sw      s7, 136(s5)
        mflo    s7, $ac2
        sw      s7, 132(s5)

        mfhi    s7, $ac3
        sw      s7, 144(s5)
        mflo    s7, $ac3
        sw      s7, 140(s5)

        rddsp   s7
        sw      s7, 148(s5)

        mfhi    s7, $ac0
        sw      s7, 12(s5)
        mflo    s7, $ac0
        sw      s7, 8(s5)

        /* Test if FPU context save is required. */
        lw      s7, portTASK_HAS_FPU_STACK_LOCATION(s5)
        beq     s7, zero, 1f
        nop

        /* Save the FPU registers above the normal context. */
        portSAVE_FPU_REGS   (portCONTEXT_SIZE + 8), s5

        /* Save the FPU status register */
        cfc1    s7, $f31
        sw      s7, ( portCONTEXT_SIZE + portFPCSR_STACK_LOCATION )(s5)

    1:
        /* Save the stack pointer to the task. */
        la      s7, pxCurrentTCB
        lw      s7, (s7)
        sw      s5, (s7)

        /* Set the interrupt mask to the max priority that can use the API.  The
        yield handler will only be called at configKERNEL_INTERRUPT_PRIORITY which
        is below configMAX_SYSCALL_INTERRUPT_PRIORITY - so this can only ever
        raise the IPL value and never lower it. */
        di
        ehb
        mfc0    s7, _CP0_STATUS
        ins     s7, zero, 10, 7
        ins     s7, zero, 18, 1
        ori     s6, s7, ( configMAX_SYSCALL_INTERRUPT_PRIORITY << 10 ) | 1

        /* This mtc0 re-enables interrupts, but only above
        configMAX_SYSCALL_INTERRUPT_PRIORITY. */
        mtc0    s6, _CP0_STATUS
        ehb

        /* Clear the software interrupt in the core. */
        mfc0    s6, _CP0_CAUSE
        ins     s6, zero, 8, 1
        mtc0    s6, _CP0_CAUSE
        ehb

        /* Clear the interrupt in the interrupt controller. */
        la      s6, IFS0CLR
        addiu   s4, zero, 2
        sw      s4, (s6)

        jal     vTaskSwitchContext
        nop

        /* Clear the interrupt mask again.  The saved status value is still in s7. */
        mtc0    s7, _CP0_STATUS
        ehb

        /* Restore the stack pointer from the TCB. */
        la      s0, pxCurrentTCB
        lw      s0, (s0)
        lw      s5, (s0)

        /* Test if the FPU context needs restoring. */
        lw      s0, portTASK_HAS_FPU_STACK_LOCATION(s5)
        beq     s0, zero, 1f
        nop

        /* Restore the FPU status register. */
        lw      s0, ( portCONTEXT_SIZE + portFPCSR_STACK_LOCATION )(s5)
        ctc1    s0, $f31

        /* Restore the FPU registers. */
        portLOAD_FPU_REGS   ( portCONTEXT_SIZE + 8 ), s5

    1:
        /* Restore the rest of the context. */
        lw      s0, 128(s5)
        mthi    s0, $ac1
        lw      s0, 124(s5)
        mtlo        s0, $ac1

        lw      s0, 136(s5)
        mthi    s0, $ac2
        lw      s0, 132(s5)
        mtlo    s0, $ac2

        lw      s0, 144(s5)
        mthi    s0, $ac3
        lw      s0, 140(s5)
        mtlo    s0, $ac3

        lw      s0, 148(s5)
        wrdsp   s0

        lw      s0, 8(s5)
        mtlo    s0, $ac0
        lw      s0, 12(s5)
        mthi    s0, $ac0

        lw      $1, 16(s5)
        lw      s0, 20(s5)
        lw      s1, 24(s5)
        lw      s2, 28(s5)
        lw      s3, 32(s5)
        lw      s4, 36(s5)

        /* s5 is loaded later. */
        lw      s6, 44(s5)
        lw      s7, 48(s5)
        lw      v0, 52(s5)
        lw      v1, 56(s5)
        lw      a0, 60(s5)
        lw      a1, 64(s5)
        lw      a2, 68(s5)
        lw      a3, 72(s5)
        lw      t0, 76(s5)
        lw      t1, 80(s5)
        lw      t2, 84(s5)
        lw      t3, 88(s5)
        lw      t4, 92(s5)
        lw      t5, 96(s5)
        lw      t6, 100(s5)
        lw      t7, 104(s5)
        lw      t8, 108(s5)
        lw      t9, 112(s5)
        lw      s8, 116(s5)
        lw      ra, 120(s5)

        /* Protect access to the k registers, and others. */
        di
        ehb

        /* Set nesting back to zero.  As the lowest priority interrupt this
        interrupt cannot have nested. */
        la      k0, uxInterruptNesting
        sw      zero, 0(k0)

        /* Switch back to use the real stack pointer. */
        add     sp, zero, s5

        /* Restore the real s5 value. */
        lw      s5, 40(sp)

        /* Pop the FPU context value from the stack */
        lw      k0, portTASK_HAS_FPU_STACK_LOCATION(sp)
        la      k1, ulTaskHasFPUContext
        sw      k0, 0(k1)
        beq     k0, zero, 1f
        nop

        /* task has FPU context so adjust the stack frame after popping the
        status and epc values. */
        lw      k1, portSTATUS_STACK_LOCATION(sp)
        lw      k0, portEPC_STACK_LOCATION(sp)
        addiu   sp, sp, portFPU_CONTEXT_SIZE
        beq     zero, zero, 2f
        nop

    1:
        /* Pop the status and epc values. */
        lw      k1, portSTATUS_STACK_LOCATION(sp)
        lw      k0, portEPC_STACK_LOCATION(sp)

    2:
        /* Remove stack frame. */
        addiu   sp, sp, portCONTEXT_SIZE

    #else
        /* Code sequence for no FPU support, the context save requires advance
        knowledge of the stack frame size when no FPU is being used */

        /* Make room for the context. First save the current status so it can be
        manipulated, and the cause and EPC registers so thier original values are
        captured. */
        addiu   sp, sp, -portCONTEXT_SIZE
        mfc0    k1, _CP0_STATUS

        /* Also save s6 and s5 so they can be used.  Any nesting interrupts should
        maintain the values of these registers across the ISR. */
        sw      s6, 44(sp)
        sw      s5, 40(sp)
        sw      k1, portSTATUS_STACK_LOCATION(sp)

        /* Prepare to re-enabled interrupts above the kernel priority. */
        ins     k1, zero, 10, 7         /* Clear IPL bits 0:6. */
        ins     k1, zero, 18, 1         /* Clear IPL bit 7.  It would be an error here if this bit were set anyway. */
        ori     k1, k1, ( configMAX_SYSCALL_INTERRUPT_PRIORITY << 10 )
        ins     k1, zero, 1, 4          /* Clear EXL, ERL and UM. */

        /* s5 is used as the frame pointer. */
        add     s5, zero, sp

        /* Swap to the system stack.  This is not conditional on the nesting
        count as this interrupt is always the lowest priority and therefore
        the nesting is always 0. */
        la      sp, xISRStackTop
        lw      sp, (sp)

        /* Set the nesting count. */
        la      k0, uxInterruptNesting
        addiu   s6, zero, 1
        sw      s6, 0(k0)

        /* s6 holds the EPC value, this is saved with the rest of the context
        after interrupts are enabled. */
        mfc0    s6, _CP0_EPC

        /* Re-enable interrupts above configMAX_SYSCALL_INTERRUPT_PRIORITY. */
        mtc0    k1, _CP0_STATUS

        /* Save the context into the space just created.  s6 is saved again
        here as it now contains the EPC value. */
        sw      ra, 120(s5)
        sw      s8, 116(s5)
        sw      t9, 112(s5)
        sw      t8, 108(s5)
        sw      t7, 104(s5)
        sw      t6, 100(s5)
        sw      t5, 96(s5)
        sw      t4, 92(s5)
        sw      t3, 88(s5)
        sw      t2, 84(s5)
        sw      t1, 80(s5)
        sw      t0, 76(s5)
        sw      a3, 72(s5)
        sw      a2, 68(s5)
        sw      a1, 64(s5)
        sw      a0, 60(s5)
        sw      v1, 56(s5)
        sw      v0, 52(s5)
        sw      s7, 48(s5)
        sw      s6, portEPC_STACK_LOCATION(s5)
        /* s5 and s6 has already been saved. */
        sw      s4, 36(s5)
        sw      s3, 32(s5)
        sw      s2, 28(s5)
        sw      s1, 24(s5)
        sw      s0, 20(s5)
        sw      $1, 16(s5)

        /* s7 is used as a scratch register as this should always be saved across
        nesting interrupts. */

        /* Save the AC0, AC1, AC2 and AC3. */
        mfhi    s7, $ac1
        sw      s7, 128(s5)
        mflo    s7, $ac1
        sw      s7, 124(s5)

        mfhi    s7, $ac2
        sw      s7, 136(s5)
        mflo    s7, $ac2
        sw      s7, 132(s5)

        mfhi    s7, $ac3
        sw      s7, 144(s5)
        mflo    s7, $ac3
        sw      s7, 140(s5)

        rddsp   s7
        sw      s7, 148(s5)

        mfhi    s7, $ac0
        sw      s7, 12(s5)
        mflo    s7, $ac0
        sw      s7, 8(s5)

        /* Save the stack pointer to the task. */
        la      s7, pxCurrentTCB
        lw      s7, (s7)
        sw      s5, (s7)

        /* Set the interrupt mask to the max priority that can use the API.  The
        yield handler will only be called at configKERNEL_INTERRUPT_PRIORITY which
        is below configMAX_SYSCALL_INTERRUPT_PRIORITY - so this can only ever
        raise the IPL value and never lower it. */
        di
        ehb
        mfc0    s7, _CP0_STATUS
        ins     s7, zero, 10, 7
        ins     s7, zero, 18, 1
        ori     s6, s7, ( configMAX_SYSCALL_INTERRUPT_PRIORITY << 10 ) | 1

        /* This mtc0 re-enables interrupts, but only above
        configMAX_SYSCALL_INTERRUPT_PRIORITY. */
        mtc0    s6, _CP0_STATUS
        ehb

        /* Clear the software interrupt in the core. */
        mfc0    s6, _CP0_CAUSE
        ins     s6, zero, 8, 1
        mtc0    s6, _CP0_CAUSE
        ehb

        /* Clear the interrupt in the interrupt controller. */
        la      s6, IFS0CLR
        addiu   s4, zero, 2
        sw      s4, (s6)

        jal     vTaskSwitchContext
        nop

        /* Clear the interrupt mask again.  The saved status value is still in s7. */
        mtc0    s7, _CP0_STATUS
        ehb

        /* Restore the stack pointer from the TCB. */
        la      s0, pxCurrentTCB
        lw      s0, (s0)
        lw      s5, (s0)

        /* Restore the rest of the context. */
        lw      s0, 128(s5)
        mthi    s0, $ac1
        lw      s0, 124(s5)
        mtlo    s0, $ac1

        lw      s0, 136(s5)
        mthi    s0, $ac2
        lw      s0, 132(s5)
        mtlo    s0, $ac2

        lw      s0, 144(s5)
        mthi    s0, $ac3
        lw      s0, 140(s5)
        mtlo    s0, $ac3

        lw      s0, 148(s5)
        wrdsp   s0

        lw      s0, 8(s5)
        mtlo    s0, $ac0
        lw      s0, 12(s5)
        mthi    s0, $ac0

        lw      $1, 16(s5)
        lw      s0, 20(s5)
        lw      s1, 24(s5)
        lw      s2, 28(s5)
        lw      s3, 32(s5)
        lw      s4, 36(s5)

        /* s5 is loaded later. */
        lw      s6, 44(s5)
        lw      s7, 48(s5)
        lw      v0, 52(s5)
        lw      v1, 56(s5)
        lw      a0, 60(s5)
        lw      a1, 64(s5)
        lw      a2, 68(s5)
        lw      a3, 72(s5)
        lw      t0, 76(s5)
        lw      t1, 80(s5)
        lw      t2, 84(s5)
        lw      t3, 88(s5)
        lw      t4, 92(s5)
        lw      t5, 96(s5)
        lw      t6, 100(s5)
        lw      t7, 104(s5)
        lw      t8, 108(s5)
        lw      t9, 112(s5)
        lw      s8, 116(s5)
        lw      ra, 120(s5)

        /* Protect access to the k registers, and others. */
        di
        ehb

        /* Set nesting back to zero.  As the lowest priority interrupt this
        interrupt cannot have nested. */
        la      k0, uxInterruptNesting
        sw      zero, 0(k0)

        /* Switch back to use the real stack pointer. */
        add     sp, zero, s5

        /* Restore the real s5 value. */
        lw      s5, 40(sp)

        /* Pop the status and epc values. */
        lw      k1, portSTATUS_STACK_LOCATION(sp)
        lw      k0, portEPC_STACK_LOCATION(sp)

        /* Remove stack frame. */
        addiu   sp, sp, portCONTEXT_SIZE

    #endif /* ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 ) */

    /* Restore the status and EPC registers and return */
    mtc0    k1, _CP0_STATUS
    mtc0    k0, _CP0_EPC
    ehb
    eret
    nop

    .end    vPortYieldISR

/******************************************************************/

#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )

    .macro portFPUSetAndInc reg, dest
    mtc1    \reg, \dest
    cvt.d.w \dest, \dest
    addiu   \reg, \reg, 1
    .endm

    .set    noreorder
    .set    noat
    .section .text, code
    .ent    vPortInitialiseFPSCR

vPortInitialiseFPSCR:

    /* Initialize the floating point status register in CP1. The initial
    value is passed in a0. */
    ctc1        a0, $f31

    /* Clear the FPU registers */
    addiu           a0, zero, 0x0000
    portFPUSetAndInc    a0, $f0
    portFPUSetAndInc    a0, $f1
    portFPUSetAndInc    a0, $f2
    portFPUSetAndInc    a0, $f3
    portFPUSetAndInc    a0, $f4
    portFPUSetAndInc    a0, $f5
    portFPUSetAndInc    a0, $f6
    portFPUSetAndInc    a0, $f7
    portFPUSetAndInc    a0, $f8
    portFPUSetAndInc    a0, $f9
    portFPUSetAndInc    a0, $f10
    portFPUSetAndInc    a0, $f11
    portFPUSetAndInc    a0, $f12
    portFPUSetAndInc    a0, $f13
    portFPUSetAndInc    a0, $f14
    portFPUSetAndInc    a0, $f15
    portFPUSetAndInc    a0, $f16
    portFPUSetAndInc    a0, $f17
    portFPUSetAndInc    a0, $f18
    portFPUSetAndInc    a0, $f19
    portFPUSetAndInc    a0, $f20
    portFPUSetAndInc    a0, $f21
    portFPUSetAndInc    a0, $f22
    portFPUSetAndInc    a0, $f23
    portFPUSetAndInc    a0, $f24
    portFPUSetAndInc    a0, $f25
    portFPUSetAndInc    a0, $f26
    portFPUSetAndInc    a0, $f27
    portFPUSetAndInc    a0, $f28
    portFPUSetAndInc    a0, $f29
    portFPUSetAndInc    a0, $f30
    portFPUSetAndInc    a0, $f31

    jr      ra
    nop

    .end vPortInitialiseFPSCR

#endif /* ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 ) */

#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )

    /**********************************************************************/
    /* Test read back                               */
    /* a0 = address to store registers              */

    .set        noreorder
    .set        noat
    .section    .text, code
    .ent        vPortFPUReadback
    .global     vPortFPUReadback

vPortFPUReadback:
    sdc1        $f0, 0(a0)
    sdc1        $f1, 8(a0)
    sdc1        $f2, 16(a0)
    sdc1        $f3, 24(a0)
    sdc1        $f4, 32(a0)
    sdc1        $f5, 40(a0)
    sdc1        $f6, 48(a0)
    sdc1        $f7, 56(a0)
    sdc1        $f8, 64(a0)
    sdc1        $f9, 72(a0)
    sdc1        $f10, 80(a0)
    sdc1        $f11, 88(a0)
    sdc1        $f12, 96(a0)
    sdc1        $f13, 104(a0)
    sdc1        $f14, 112(a0)
    sdc1        $f15, 120(a0)
    sdc1        $f16, 128(a0)
    sdc1        $f17, 136(a0)
    sdc1        $f18, 144(a0)
    sdc1        $f19, 152(a0)
    sdc1        $f20, 160(a0)
    sdc1        $f21, 168(a0)
    sdc1        $f22, 176(a0)
    sdc1        $f23, 184(a0)
    sdc1        $f24, 192(a0)
    sdc1        $f25, 200(a0)
    sdc1        $f26, 208(a0)
    sdc1        $f27, 216(a0)
    sdc1        $f28, 224(a0)
    sdc1        $f29, 232(a0)
    sdc1        $f30, 240(a0)
    sdc1        $f31, 248(a0)

    jr      ra
    nop

    .end vPortFPUReadback

#endif /* ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 ) */
