Lines Matching refs:console
14 the console before standard serial driver is probed. The console is
33 bool "Support for console on AMBA serial port"
38 console (the system console is the device which receives all kernel
41 Even if you say Y here, the currently visible framebuffer console
42 (/dev/tty0) will still be used as the system console by default, but
44 "console=ttyAM0". (Try "man bootparam" or see the documentation of
60 bool "Support for console on AMBA serial port"
66 console (the system console is the device which receives all kernel
69 Even if you say Y here, the currently visible framebuffer console
70 (/dev/tty0) will still be used as the system console by default, but
72 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
77 bool "Early console using Arm compatible semihosting"
83 Support for early debug console using Arm compatible semihosting.
84 This enables the console before standard serial driver is probed.
86 The console is enabled when early_param is processed.
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
96 the console before standard serial driver is probed. This is enabled
97 with "earlycon=sbi" on the kernel command line. The console is
116 bool "Support for console on a BCM1xxx DUART serial port"
122 system console (the system console is the device which receives all
140 bool "Support for console on AT91 serial port"
146 AT91 processor as the system console (the system
147 console is the device which receives all kernel messages and
178 /dev/, and pass "console=ttyATn" to the kernel.
191 bool "Support for console on meson"
197 system console (the system console is the device which
211 bool "Support for console on CLPS711X serial port"
215 Even if you say Y here, the currently visible virtual console
216 (/dev/tty0) will still be used as the system console by default, but
218 "console=ttyCL1".
241 bool "Support for console on Samsung SoC serial port"
247 an virtual console.
249 Even if you say Y here, the currently visible virtual console
250 (/dev/tty0) will still be used as the system console by default, but
252 "console=ttySACx". (Try "man bootparam" or see the documentation of
278 bool "Support for console on a Tegra TCU serial port"
284 system console (the system console is the device which receives all
301 bool "Support for console on a Tegra UTC serial port"
307 the system console (the system console is the device which receives
347 bool "Support console on DECstation DZ serial driver"
353 system console (the system console is the device which receives all
357 Note that the firmware uses ttyS3 as the serial console on
377 bool "Support for console on a DECstation Z85C30 serial port"
383 system console (the system console is the device which receives all
387 Note that the firmware uses ttyS1 as the serial console on the
407 make it the console by answering Y to this option.
409 Even if you say Y here, the currently visible virtual console
410 (/dev/tty0) will still be used as the system console by default, but
412 "console=ttyFB". (Try "man bootparam" or see the documentation of
440 CPU you can make it the console by answering Y to this option.
442 Even if you say Y here, the currently visible virtual console
443 (/dev/tty0) will still be used as the system console by default, but
445 "console=ttySA0". (Try "man bootparam" or see the documentation of
469 CPU you can make it the console by answering Y to this option.
471 Even if you say Y here, the currently visible virtual console
472 (/dev/tty0) will still be used as the system console by default, but
474 "console=ttySA0". (Try "man bootparam" or see the documentation of
494 CPU you can make it the console by answering Y/M to this option.
496 Even if you say Y/M here, the currently visible virtual console
497 (/dev/tty0) will still be used as the system console by default, but
499 "console=ttymxc0". (Try "man bootparam" or see the documentation of
525 bool "Support for console on Xilinx uartlite serial port"
531 console (the system console is the device which receives all kernel
565 on your Sparc system as the console, you can do so by answering
581 on your Sparc system as the console, you can do so by answering
594 software console. The following steps need to be completed to use
600 root on this console.)
601 4. Change the kernel command console parameter to: console=ttyB0
604 bool "Support for console on serial MUX"
622 on your Sparc system as the console, you can do so by answering
629 This driver supports the console device found on SUN4V Sparc
661 bool "Support for console on SuperH SCI(F)" if EXPERT
667 bool "Support for early console on SuperH SCI(F)" if EXPERT
697 bool "Enable LPC32XX high speed UART serial console"
702 ports on the LPC32XX as the console, you can do so by answering
731 bool "Coldfire serial console support"
735 Enable a ColdFire internal serial port to be the system console.
777 on your (Power)Mac as the console, you can do so by answering
789 bool "Support for console on CPM SCC/SMC serial port"
794 console (the system console is the device which receives all kernel
797 Even if you say Y here, the currently visible framebuffer console
798 (/dev/tty0) will still be used as the system console by default, but
800 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
812 to use a serial port as a console, this must be included in kernel and
816 bool "PIC32 serial console support"
820 If you have a PIC32, this driver supports the putting a console on one
823 Say Y to use the PIC32 console, otherwise say N.
832 for use as console, it must be included in kernel and not as a
841 of the Freescale MPC52xx family as a console.
848 Select the MPC52xx console baud rate.
850 console baudrate
911 bool "MSM serial console support"
928 Serial console driver for Qualcomm Technologies Inc's GENI based
937 bool "VIA VT8500 serial console support"
959 console.
961 Even if you say Y here, the currently visible virtual console
962 (/dev/tty0) will still be used as the system console by default, but
964 "console=ttyOx". (Try "man bootparam" or see the documentation of
986 system console.
988 Even if you say Y here, the currently visible virtual console
989 (/dev/tty0) will still be used as the system console by default, but
991 "console=ttySIFx". (Try "man bootparam" or see the documentation of
1011 system console.
1035 Support for console on SCCNXP serial ports.
1083 BCM7xxx (STB) - DOCSIS console
1092 you can make it the console by answering Y to this option.
1106 Support for running a console on the GRLIB APBUART
1115 bool "Altera JTAG UART console support"
1120 Enable a Altera JTAG UART port to be the system console.
1127 Bypass console output and keep going even if there is no
1155 bool "Altera UART console support"
1160 Enable a Altera UART port to be the system console.
1179 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1183 Say Y here if you wish to use the PCH UART as the system console
1184 (the system console is the device which receives all kernel messages and
1197 bool "MXS AUART console support"
1201 Enable a MXS AUART port to be the system console.
1212 bool "Cadence UART console support"
1217 Enable a Cadence UART port to be the system console.
1236 Enable a built-in UART port of the AR933X to be the system console.
1247 bool "MPS2 UART console support"
1321 you can make it the console by answering Y to this option.
1337 SoCs, you can make it the console by answering Y to this option.
1352 SoCs, you can make it the console by answering Y to this option.
1367 bool "Support for console on ST ASC"
1390 bool "Spreadtrum UART console support"
1395 Support for early debug console using Spreadtrum's serial. This enables
1396 the console before standard serial driver is probed. This is enabled
1397 with "earlycon" on the kernel command line. The console is
1414 bool "Support for console on STM32"
1438 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1439 (the system console is the device which receives all kernel messages
1460 as the system console.
1479 console. Only earlycon is implemented currently.
1496 bool "Support for console on MILBEAUT USIO/UART serial port"
1503 SoCs as the system console (the system console is the device which
1529 bool "LiteUART serial port console support"
1535 controller from LiteX SoC builder as the system console
1536 (the system console is the device which receives all kernel messages
1559 system console.
1560 Even if you say Y here, the currently visible virtual console
1561 (/dev/tty0) will still be used as the system console by default, but
1563 "console=ttySUPx".
1572 for use as console, it must be included in kernel and not as a
1582 Nuvoton MA35D1 family as a console.
1583 Even if you say Y here, the currently visible virtual console
1584 (/dev/tty0) will still be used as the system console by default,
1586 "console=ttyNVTx".