| /external/platform/nrfx/doc/ |
| A D | nrfx.doxyfile | 6 # All text after a double hash (##) is considered a comment and is placed in
10 # The format is:
21 # that follow. The default is UTF-8 which is also the encoding used for all text
31 # project for which the documentation is generated. This name is used in the
39 # control system is used.
122 # text. Otherwise, the brief description is used as-is. If left blank, the
417 # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
702 # tag is left empty.
789 # Note: If this tag is empty the current directory is searched.
1187 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
[all …]
|
| /external/lib/libm/ |
| A D | e_powf.c | 62 int32_t hx,hy,ix,iy,is; in __ieee754_powf() local
143 GET_FLOAT_WORD(is,t1); in __ieee754_powf()
144 SET_FLOAT_WORD(t1,is&0xfffff000); in __ieee754_powf()
166 GET_FLOAT_WORD(is,s_h); in __ieee754_powf()
179 GET_FLOAT_WORD(is,t_h); in __ieee754_powf()
187 GET_FLOAT_WORD(is,p_h); in __ieee754_powf()
195 GET_FLOAT_WORD(is,t1); in __ieee754_powf()
201 GET_FLOAT_WORD(is,y); in __ieee754_powf()
202 SET_FLOAT_WORD(y1,is&0xfffff000); in __ieee754_powf()
232 GET_FLOAT_WORD(is,t); in __ieee754_powf()
[all …]
|
| /external/platform/lpc15xx/lpcopen/periph_acmp/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 * found on ADC1_1/PIN0.9, which is trimmed through the potentiometer.
39 * The negative voltage input is obtained from the voltage ladder, the
40 * voltage ladder output is set to around 50% of Vdd.
43 * a CMP IRQ is fired. Based on which side of the voltage is in
|
| /external/platform/lpc15xx/lpcopen/periph_adc/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 * ADC0 is configured to monitor the internal temperature sensor on
39 * ADC0 channel 0. It is setup to be triggered periodically by the
42 * ADC1 is configured to monitor an analog input signal on ADC1. The
43 * ADC channel used may vary per board. It is setup to be triggered
|
| /external/platform/lpc15xx/lpcopen/periph_i2c_rom_polling_slave/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 * This demo supports both 7-bit and 10-bit addressing, but only 7-bit addressing is
39 * used in the example. After I2C is setup, the I2C receive and transmit functions
42 * If this demo is running correctly and is correctly connected to a master that
44 * requirements, this example is best used as a reference on how to use the ROM
|
| /external/platform/lpc15xx/lpcopen/periph_i2c_rom_interrupt_slave/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 * This demo supports both 7-bit and 10-bit addressing, but only 7-bit addressing is
39 * used in the example. After I2C is setup, the I2C receive and transmit functions
42 * If this demo is running correctly and is correctly connected to a master that
44 * requirements, this example is best used as a reference on how to use the ROM
|
| /external/platform/lpc15xx/lpcopen/periph_systick/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
36 * timer and SYSTICK clock divider. The LED state is toggled in the systick
41 * seems to hasten the interrupt occurrence. For example, if the SYSTICK clock divider is set
42 * to 1, 453 interrupts occur in a 30-second interval. If the SYSTICK clock divider is set
47 * In addition, once the SYSTICK clock divider is set and SYSTICK is enabled, the SYSTICK clock
|
| /external/platform/lpc15xx/lpcopen/periph_i2c_rom_interrupt/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 * This demo supports both 7-bit and 10-bit addressing, but only 7-bit addressing is
39 * used in the example. After I2C is setup, the I2C master receive and transmit
43 * base board. Using the debugger or an I2C analyzer, the temperature reading process is visible.
44 * The temperature data is also outputted through the Debug UART port.<br>
|
| /external/platform/lpc15xx/lpcopen/periph_i2c_rom_polling/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 * This demo supports both 7-bit and 10-bit addressing, but only 7-bit addressing is
39 * used in the example. After I2C is setup, the I2C master receive and transmit
43 * base board. Using the debugger or an I2C analyzer, the temperature reading process is visible.
44 * The temperature data is also outputted through the Debug UART port.<br>
|
| /external/platform/lpc15xx/lpcopen/periph_adc_rom/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 * ADC0 is configured to monitor the internal temperature sensor on
39 * ADC0 channel 0. It is setup to be triggered periodically by the
42 * ADC1 is configured to monitor an analog input signal on ADC1. The
43 * ADC channel used may vary per board. It is setup to be triggered
|
| /external/platform/lpc15xx/lpcopen/periph_dac/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
39 * The timer is set up to generate interrupts at 2KHz i.e. 20 DAC output samples
41 * register is updated with an incremented value and the value is reset after it
42 * crosses the 12bit boundary for DAC input. P0.12 is the set up as the DAC output
|
| /external/platform/lpc15xx/lpcopen/periph_i2cm_interrupt/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
39 * sensor on the Motor Control board. After I2C is setup, the I2CM master receive and transmit
40 * functions are called through the i2cm_15xx driver routines. The temperature data is outputted
44 * The Motor Control board is required with the LPCXpresso board to use this
|
| /external/platform/lpc15xx/lpcopen/periph_i2cm_polling/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
39 * sensor on the Motor Control board. After I2C is setup, the I2CM master receive and transmit
40 * functions are called through the i2cm_15xx driver routines. The temperature data is outputted
44 * The Motor Control board is required with the LPCXpresso board to use this
|
| /external/platform/lpc15xx/lpcopen/periph_spi_interrupt/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 …* using interrupt mode. The SPI is configured to be in loop back mode and the received data is com…
39 …* against the transmitted data, if they match the transmission is repeated and the LED 0 keeps fli…
|
| /external/platform/lpc15xx/lpcopen/periph_spi_polling/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
38 …* using polling mode. The SPI is configured to be in loop back mode and the received data is compa…
39 …* against the transmitted data, if they match the transmission is repeated and the LED 0 keeps fli…
|
| /external/platform/lpc15xx/lpcopen/periph_dma_rom_uart/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
41 * only queued to the DMA controller when data is waiting to be sent.
47 * setup for a Ping Pong transfer, linked list is not supported by the ROM driver.
49 * a full buffer of data has been received. Once this buffer is received, it
50 * is sent back out via UART transmit via DMA.<br>
|
| /external/platform/lpc15xx/lpcopen/periph_spi_rom_interrupt/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
39 …* using interrupt mode. The SPI is configured to be in loop back mode and the received data is com…
40 …* against the transmitted data, if they match the transmission is repeated and the LED 0 keeps fli…
|
| /external/platform/lpc15xx/lpcopen/periph_spi_rom_polling/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
39 …* using polling mode. The SPI is configured to be in loop back mode and the received data is compa…
40 …* against the transmitted data, if they match the transmission is repeated and the LED 0 keeps fli…
|
| /external/platform/lpc15xx/lpcopen/periph_uart_rom_int/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
41 * Once the example is started, a small message is printed on terminal. Any data
45 * The LPCXpresso base board is required with the LPCXpresso board to use this
|
| /external/platform/lpc15xx/lpcopen/periph_uart_rom_polling/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
41 * Once the example is started, a small message is printed on terminal. Any data
45 * The LPCXpresso base board is required with the LPCXpresso board to use this
|
| /external/platform/pico/rp2_common/pico_standard_link/ |
| A D | memmap_copy_to_ram.ld | 36 /* Second stage bootloader is prepended to the image. It must be 256 bytes big
37 and checksummed. It is usually built by the boot_stage2 target
55 The debugger will use the ELF entry point, which is the _entry_point
175 /* __etext is (for backwards compatibility) the name of the .data init source pointer (...) */
217 /* .stack*_dummy section doesn't contains any symbols. It is only
221 * stack1 section may be empty/missing if platform_launch_core1 is not used */
224 * stack is not used then all of SCRATCH_X is free.
239 /* stack limit is poorly named, but historically is maximum heap ptr */
|
| /external/platform/lpc15xx/lpcopen/periph_dma_uart/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
41 * only queued to the DMA controller when data is waiting to be sent.
48 * a full buffer of data has been received. Once this buffer is received, it
49 * is sent back out via UART transmit via DMA.<br>
|
| /external/platform/lpc15xx/lpcopen/periph_flashiap/example/ |
| A D | readme.dox | 10 * Software that is described herein is for illustrative purposes only
12 * LPC products. This software is supplied "AS IS" without any warranties of
26 * documentation is hereby granted, under NXP Semiconductors' and its
28 * is used in conjunction with NXP Semiconductors microcontrollers. This
37 * generating a FLASH signature. For this example, the code is running from FLASH
39 * with some data. After the program is complete, the signature for the programmed
40 * area is generated. The example also toggles the LED in the systick interrupt.
|
| /external/platform/pico/rp2_common/cmsis/stub/CMSIS/Core/Include/ |
| A D | cmsis_compiler.h | 127 #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
196 #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
200 #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
228 #warning No compiler specific solution for __USED. __USED is ignored.
264 #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
268 #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
272 #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored.
|
| /external/platform/lpc15xx/lpcopen/periph_uart_rb/example/ |
| A D | readme.dox | 9 * Software that is described herein is for illustrative purposes only
11 * LPC products. This software is supplied "AS IS" without any warranties of
25 * documentation is hereby granted, under NXP Semiconductors' and its
27 * is used in conjunction with NXP Semiconductors microcontrollers. This
41 * Once the example is started, a small message is printed on terminal. Any data
|