1/*
2 * @brief I2CM bus master example using polling mode
3 *
4 * @note
5 * Copyright(C) NXP Semiconductors, 2014
6 * All rights reserved.
7 *
8 * @par
9 * Software that is described herein is for illustrative purposes only
10 * which provides customers with programming information regarding the
11 * LPC products.  This software is supplied "AS IS" without any warranties of
12 * any kind, and NXP Semiconductors and its licensor disclaim any and
13 * all warranties, express or implied, including all implied warranties of
14 * merchantability, fitness for a particular purpose and non-infringement of
15 * intellectual property rights.  NXP Semiconductors assumes no responsibility
16 * or liability for the use of the software, conveys no license or rights under any
17 * patent, copyright, mask work right, or any other intellectual property rights in
18 * or to any products. NXP Semiconductors reserves the right to make changes
19 * in the software without notification. NXP Semiconductors also makes no
20 * representation or warranty that such application will be suitable for the
21 * specified use without further testing or modification.
22 *
23 * @par
24 * Permission to use, copy, modify, and distribute this software and its
25 * documentation is hereby granted, under NXP Semiconductors' and its
26 * licensor's relevant copyrights in the software, without fee, provided that it
27 * is used in conjunction with NXP Semiconductors microcontrollers.  This
28 * copyright, permission, and disclaimer notice must appear in all copies of
29 * this code.
30 */
31
32/** @defgroup EXAMPLES_PERIPH_15XX_I2CMPOLL LPC15xx I2CM bus master example using polling
33 * @ingroup EXAMPLES_PERIPH_15XX
34 * <b>Example description</b><br>
35 * This example shows how to configure I2C as a bus master in polling mode using
36 * the I2CM driver.<br>
37 *
38 * This example uses 7-bit addressing to periodically read temperature data from a temperature
39 * sensor on the Motor Control board. After I2C is setup, the I2CM master receive and transmit
40 * functions are called through the i2cm_15xx driver routines. The temperature data is outputted
41 * through the Debug UART port.<br>
42 *
43 * <b>Special connection requirements</b><br>
44 * The Motor Control board is required with the LPCXpresso board to use this
45 * example.<br>
46 *
47 * <b>Build procedures:</b><br>
48 * Visit the <a href="http://www.lpcware.com/content/project/lpcopen-platform-nxp-lpc-microcontrollers/lpcopen-v200-quickstart-guides">LPCOpen quickstart guides</a>
49 * to get started building LPCOpen projects.
50 *
51 * <b>Supported boards and board setup:</b><br>
52 * @ref LPCOPEN_15XX_BOARD_LPCXPRESSO_1549<br>
53 *
54 * <b>Submitting LPCOpen issues:</b><br>
55 * @ref LPCOPEN_COMMUNITY
56 * @{
57 */
58
59/**
60 * @}
61 */
62