1/*
2 * @brief USB to UART bridge example
3 *
4 * @note
5 * Copyright(C) NXP Semiconductors, 2013
6 * All rights reserved.
7 *
8 * @par
9 * Software that is described herein is for illustrative purposes only
10 * which provides customers with programming information regarding the
11 * LPC products.  This software is supplied "AS IS" without any warranties of
12 * any kind, and NXP Semiconductors and its licensor disclaim any and
13 * all warranties, express or implied, including all implied warranties of
14 * merchantability, fitness for a particular purpose and non-infringement of
15 * intellectual property rights.  NXP Semiconductors assumes no responsibility
16 * or liability for the use of the software, conveys no license or rights under any
17 * patent, copyright, mask work right, or any other intellectual property rights in
18 * or to any products. NXP Semiconductors reserves the right to make changes
19 * in the software without notification. NXP Semiconductors also makes no
20 * representation or warranty that such application will be suitable for the
21 * specified use without further testing or modification.
22 *
23 * @par
24 * Permission to use, copy, modify, and distribute this software and its
25 * documentation is hereby granted, under NXP Semiconductors' and its
26 * licensor's relevant copyrights in the software, without fee, provided that it
27 * is used in conjunction with NXP Semiconductors microcontrollers.  This
28 * copyright, permission, and disclaimer notice must appear in all copies of
29 * this code.
30 */
31
32/** @defgroup EXAMPLES_USBDROM_15XX_CDC_UARTN LPC15XX USB to UART bridge example
33 * @ingroup EXAMPLES_USBDROM_15XX
34 * <b>Example description</b><br>
35 * The example shows how to us USBD ROM stack to creates a USB to UART converter port.
36 * The example uses UARTN api. Note, LPC15XX has two types of UARTs.
37 * <br>
38 *
39 * <b>Special connection requirements</b><br>
40 * Connect the USB cable between micro connector on board and to a host.
41 * When connected to Windows host use the .inf included in the project
42 * directory to install the driver. For OSx (Mac) host, no drivers are needed.<br>
43 *
44 * When using  @ref LPCOPEN_15XX_BOARD_LPCXPRESSO_1549 boards with a base board you need to remove jumpers
45 * J54 & J55 on base board and power the system through USB port connected to FTDI chip. Note,
46 * serial port settings such as baud rate, parity and data bits should be same for FTDI port and
47 * "LPC VCOM port".
48 *
49 *
50 * <b>Build procedures:</b><br>
51 * Visit the <a href="http://www.lpcware.com/content/project/lpcopen-platform-nxp-lpc-microcontrollers/lpcopen-v200-quickstart-guides">LPCOpen quickstart guides</a>
52 * to get started building LPCOpen projects.
53 *
54 * <b>Supported boards and board setup:</b><br>
55 * @ref LPCOPEN_15XX_BOARD_LPCXPRESSO_1549<br>
56 *
57 * <b>Submitting LPCOpen issues:</b><br>
58 * @ref LPCOPEN_COMMUNITY
59 * @{
60 */
61
62/**
63 * @}
64 */
65