Lines Matching refs:floppy
15 The floppy driver is configured using the 'floppy=' option in
22 linux-2.6.9 floppy=thinkpad
27 append = "floppy=thinkpad"
29 Several floppy related options may be given, example::
31 linux-2.6.9 floppy=daring floppy=two_fdc
32 append = "floppy=daring floppy=two_fdc"
43 If you use the floppy driver as a module, use the following syntax::
45 modprobe floppy floppy="<options>"
49 modprobe floppy floppy="omnibook messages"
51 If you need certain options enabled every time you load the floppy driver,
54 options floppy floppy="omnibook messages"
59 The floppy driver related options are:
61 floppy=asus_pci
64 floppy=daring
65 Tells the floppy driver that you have a well behaved floppy controller.
69 floppy=0,daring
70 Tells the floppy driver that your floppy controller should be used
73 floppy=one_fdc
74 Tells the floppy driver that you have only one floppy controller.
77 floppy=two_fdc / floppy=<address>,two_fdc
78 Tells the floppy driver that you have two floppy controllers.
79 The second floppy controller is assumed to be at <address>.
83 floppy=thinkpad
84 Tells the floppy driver that you have a Thinkpad. Thinkpads use an
87 floppy=0,thinkpad
88 Tells the floppy driver that you don't have a Thinkpad.
90 floppy=omnibook / floppy=nodma
91 Tells the floppy driver not to use Dma for data transfers.
93 DMA channel for the floppy driver. This option is also useful
104 If you have a FIFO-able FDC, the floppy driver automatically
108 floppy=yesdma
109 Tells the floppy driver that a workable DMA channel is available.
112 floppy=nofifo
115 from other devices) while accessing the floppy.
117 floppy=usefifo
120 floppy=<threshold>,fifo_depth
122 mode. If this is higher, the floppy driver tolerates more
130 using 'floppycontrol --messages'. Then access a floppy
134 It is a good idea to compile the floppy driver as a module
143 floppy=<drive>,<type>,cmos
145 you have more than two floppy drives (only two can be
161 initially chosen to represent floppy *tapes*, and 6 for ED drives.
162 AMI ignored this, and used 5 for ED drives. That's why the floppy
165 floppy=unexpected_interrupts
169 floppy=no_unexpected_interrupts / floppy=L40SX
172 to be an interaction between video and floppy. The unexpected
175 floppy=broken_dcl
180 floppy operation less efficient due to unneeded cache
186 floppy=debug
189 floppy=messages
194 floppy=silent_dcl_clear
198 floppy=<nr>,irq
199 Sets the floppy IRQ to <nr> instead of 6.
201 floppy=<nr>,dma
202 Sets the floppy DMA channel to <nr> instead of 2.
204 floppy=slow
215 Additional parameters of the floppy driver can be configured at
219 It also contains additional documentation about the floppy driver.
233 Reporting problems about the floppy driver
236 If you have a question or a bug report about the floppy driver, mail
239 be sure to include the word "floppy" (or "FLOPPY") in the subject
240 line. If the reported problem happens when mounting floppy disks, be