Lines Matching refs:suspended
35 component is ``suspended`` it is in a nonfunctional low-power state; it
36 might even be turned off completely. A suspended component can be
40 suspended; an example would be reducing the CPU's clock rate. This
43 When the parts being suspended include the CPU and most of the rest of
69 When a device has been suspended, it generally doesn't resume until
71 suspended, it generally doesn't resume until the user tells it to, say
78 device is enabled for remote wakeup and it is suspended, it may resume
80 event. Examples include a suspended keyboard resuming when a key is
81 pressed, or a suspended USB hub resuming when a device is plugged in.
88 anything important and thus is a candidate for being suspended. The
92 unless all the devices plugged into that hub are already suspended.)
155 device is next suspended. (If the setting is changed
156 while the device is suspended, the change won't take
174 suspended and autoresume was not allowed. This
280 a number of keyboards show that typing on a suspended keyboard, while
306 device is going to be suspended. If the driver returns a
322 If the device is disconnected or powered down while it is suspended,
339 methods get called when the interfaces are suspended or resumed. In
343 interfaces are suspended when the device itself is suspended and all
387 does an autoresume if the device is suspended. If the
506 possible, the device should remain suspended following the system
515 For example, a suspended device may send a remote-wakeup signal while
620 suspended. This mechanism is dependent on the hub advertising port power
626 suspend. An unbound interface device is suspended by default. When unbinding,
691 Once all children and descendants have suspended the
699 or 'suspended' (logically off). There is no indication to
752 reflects the 'suspended' state. Default