Lines Matching refs:sent
100 reports. No management commands or data acknowledgements are sent on this
101 channel. Any unrequested incoming or outgoing data report must be sent on
104 not sent via intr, except if high throughput is required.
106 device management. Unrequested data input events must not be sent on this
111 Outgoing reports are usually sent on the ctrl channel via synchronous
119 data is generated by the device and sent to the host with or without
122 - OUTPUT Report: Output reports change device states. They are sent from host
124 reports are never sent from device to host, but a host can retrieve their
131 Feature reports are never sent without requests. A host must explicitly set
132 or retrieve a feature report. This also means, feature reports are never sent
135 INPUT and OUTPUT reports can be sent as pure data reports on the intr channel.
141 Plain reports must not be sent on the ctrl channel, though. Instead, the ctrl
145 - GET_REPORT: A GET_REPORT request has a report ID as payload and is sent
151 Note that data reports which are sent as answer to a GET_REPORT request are
159 GET_REPORT requests can be sent for any of the 3 report types and shall
164 sent from host to device and a device must update its current report state
298 should be sent and "reqtype" the request type. Request-type can be