Lines Matching refs:parallel
20 happen include burning your parallel port, and/or the sticks and joystick
50 and/or SNES gamepads and/or SNES mice connected to the parallel port at once,
51 the output lines of the parallel port are shared, while one of 5 available
57 The main problem with PC parallel ports is that they don't have +5V power
63 If you want to use the parallel port only, you can take the power is from
71 Unfortunately, there are pads that need a lot more of power, and parallel
73 case, you'll need to use diodes (as a prevention of destroying your parallel
87 Ground is quite easy. On PC's parallel port the ground is on any of the
93 serial transfer. These are connected to pins 2 and 3 of the parallel port,
100 each pad needs its own data pin. The parallel port pins are::
108 Note that pin 14 is not used, since it is not an input pin on the parallel
237 was written. It allows only one joystick / gamepad per parallel port, but
241 parallel port like this::
253 you might or might not, depending on your parallel port, need 10 kOhm pullup
264 the parallel port::
277 For some people just one joystick per parallel port is not enough, and/or
278 want to use them on one parallel port together with NES/SNES/PSX pads. This is
304 this little schematic to Power and Data on the parallel port, as described
321 allows up to 7 Multisystem joysticks connected to the parallel port. In
323 since this doesn't work reliably on all parallel ports, the turbografx.c driver
336 9 | o o o | o o o | o o o | 1 parallel
367 parallel port pins, and the following schematic::
407 The Select pin goes to pin 14 on the parallel port::
437 Select 1 is pin 14 on the parallel port, Select 2 is pin 16 on the
438 parallel port::
467 It can be connected to the parallel port and driven by db9.c driver. It needs the following wiring:
486 There are three drivers for the parallel port interfaces. Each, as
493 Using gamecon.c you can connect up to five devices to one parallel port. It
522 Should you want to use more than one of parallel ports at once, you can use
524 more parallel ports.
543 Caveat here: This driver only works on bidirectional parallel ports. If
544 your parallel port is recent enough, you should have no trouble with this.
545 Old parallel ports may not have this feature.
584 PC parallel port pinout