Lines Matching refs:SW1
803 < | SW1 | | SW2 | |
829 SW1 1-6: I/O Base Address Select
889 The first six switches in switch group SW1 are used to select one
932 Switches seven through ten of switch group SW1 are used to select the
1063 SW1: DIP-Switches for Station Address
1085 The station address is binary-coded with SW1.
1341 | | 90C65 || SW1 | ____|
1419 The last three switches in switch block SW1 are used to select one
1442 Switches 1-5 of switch block SW1 select the Memory Base address.
1554 < | PROM | | SW1 | A | 2 | ID3
1573 SW1 1-6: Base I/O Address Select
1628 The first six switches in switch block SW1 are used to select the I/O Base
1650 The switches 7-10 of switch block SW1 are used to select the Memory
1714 | | SW1 | LED |__|
1839 | |SW1| o|o |
1850 SW1 1-6 Base I/O Address Select
1891 The switches 1 to 6 of switch block SW1 are used to select one
1916 Jumpers 7-10 of switch block SW1 select the Memory Base address::
1972 | | | SW1 | XTAL | ____________ | S |
1981 | | SW1 | ON | | |I | |
1995 SW1 1-5: Base Memory Address Select
2032 The last three switches in switch block SW1 are used to select one
2056 Jumpers 3-5 of switch block SW1 select the Memory Base address.
2117 | |SW1 MEM+I/O| |_________________________| LED1|__|)
2141 SW1 1-5 Base Memory Address Select
2178 The last three switches in switch block SW1 are used to select one
2202 Jumpers 3-5 of switch block SW1 select the Memory Base address.
2485 | |o|o|o|o|o|o|o|o| | SW1 || SW2 ||
2510 The eight switches in group SW1 are used to set the node ID.
2661 8-Bit card, because there isn't any letter like "SW1" written to the
2747 The first three switches in switch group SW1 are used to select one
2768 Switches 6-8 of switch group SW1 select the Base of the 16K block.
2770 positions, determined by the offset, switches 4 and 5 of group SW1::
2844 | | | SW1 | | | | ID6
2867 SW1 1-5: Base Memory Address Select
2876 Although the jumpers SW1 and SW3 are marked SW, not JP, they are jumpers, not
2927 The last three switches in switch block SW1 are used to select one
2951 Jumpers 3-5 of jumper block SW1 select the Memory Base address.
3018 | | SW1 | | SL90C65 | : |- | |
3036 SW1 1-5: IRQ Select
3047 SW1: Timeouts, Interrupt and ROM
3051 up (on) SW1...(switches 1-5)
3054 The switches on SW1 labeled EXT1 (switch 6) and EXT2 (switch 7)
3058 To enable the 8K Boot PROM position SW1 switch 8 on (UP) labeled ROM.