Lines Matching refs:SW2
803 < | SW1 | | SW2 | |
831 SW2 1-6: Reserved for Future Use
1051 | | | SW2 |
1064 SW2: DIP-Switches for Memory Base and I/O Base addresses
1087 The I/O base address is coded with DIP-Switches 6,7 and 8 of SW2:
1104 DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
1377 The eight switches in SW2 are used to set the node ID. Each node attached
1575 SW2 1-8: Node ID Select (ID0-ID7)
1588 The eight switches in SW2 are used to set the node ID. Each node attached
1833 | |SW2| |
1852 SW2 1-8 Node ID Select (ID0-ID7)
1865 The eight switches in SW2 are used to set the node ID. Each node attached
1969 | | SW2 | ON arcNet |
1997 SW2 1-8: Node ID Select
2114 | |SW2 NODE ID| | | | XTAL | |
2143 SW2 1-8 Node ID Select (ID0-ID7)
2155 The eight switches in SW2 are used to set the node ID. Each node attached to
2485 | |o|o|o|o|o|o|o|o| | SW1 || SW2 ||
2551 The first three switches in switch group SW2 are used to select one
2572 Switches 4-6 of switch group SW2 select the Base of the 16K block.
2574 positions, determined by the offset, switches 7 and 8 of group SW2.
2706 The eight switches in group SW2 are used to set the node ID.
2869 SW2 1-8: Node ID Select (ID0-ID7)
2885 The eight switches in SW2 are used to set the node ID. Each node attached
3006 | | SW2 | | |
3040 SW2 1-3: Memory Buffer/PROM Address
3065 The last three switches in switch group SW2 are used to select one
3087 Switches 1-3 of switch group SW2 select the Base of the 16K block.