Lines Matching refs:use
75 the adapter to use the AUI interface instead of the 10 Base T
76 interface. This is also what to do if you want to use the BNC
89 5. You have to use speed=X duplex=Y together now. If you just
94 6. If the driver is built into the kernel, you can use the 3rd
107 0x02 use half duplex
108 0x04 use full duplex
109 0x08 use 10BaseT
110 0x10 use 100BaseTx
118 use the above options on a per adapter basis. To force a 100Mbit/HD
119 link with your eth1 adapter use::
123 Now eth0 will use auto-neg and eth1 will be forced to 100Mbit/HD.