Lines Matching refs:samples
64 This control is used to attenuate samples for left and right PCM FX-bus
65 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
66 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
70 This control is used to attenuate samples for left and right PCM FX-bus
71 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
72 The result samples are forwarded to the rear I2S DACs. These DACs operates
77 This control is used to attenuate samples for left and right PCM FX-bus
78 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
84 This control is used to attenuate samples for left and right PCM FX-bus
91 These controls are used to attenuate samples for left and right PCM FX-bus
98 This control is used to attenuate samples for left and right MIDI FX-bus
99 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
100 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
104 These controls are used to attenuate samples for left and right MIDI FX-bus
111 This control is used to attenuate samples for left and right rear PCM FX-bus
112 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
113 The result samples are forwarded to the rear I2S DACs. These DACs operate
118 These controls are used to attenuate samples for left and right rear PCM FX-bus
119 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
137 This control is used to attenuate samples for left and right front ADC PCM slots
138 of the AC97 codec. The result samples are forwarded to the front DAC PCM
148 This control is used to attenuate samples for left and right front ADC PCM slots
158 This control is used to attenuate samples from left and right IEC958 TTL
159 digital inputs (usually used by a CDROM drive). The result samples are
164 This control is used to attenuate samples from left and right IEC958 TTL
165 digital inputs (usually used by a CDROM drive). The result samples are
170 This control is used to attenuate samples from left and right zoom video
171 digital inputs (usually used by a CDROM drive). The result samples are
176 This control is used to attenuate samples from left and right zoom video
177 digital inputs (usually used by a CDROM drive). The result samples are
182 This control is used to attenuate samples from left and right IEC958 optical
183 digital input. The result samples are forwarded to the front DAC PCM slots
188 This control is used to attenuate samples from left and right IEC958 optical
189 digital inputs. The result samples are forwarded to the ADC capture FIFO
194 This control is used to attenuate samples from left and right IEC958 coaxial
195 digital inputs. The result samples are forwarded to the front DAC PCM slots
200 This control is used to attenuate samples from left and right IEC958 coaxial
201 digital inputs. The result samples are forwarded to the ADC capture FIFO
206 This control is used to attenuate samples from left and right I2S ADC
207 inputs (on the LiveDrive). The result samples are forwarded to the front
212 This control is used to attenuate samples from left and right I2S ADC
213 inputs (on the LiveDrive). The result samples are forwarded to the ADC
218 This control turns the tone control on or off. The samples for front, rear
224 When the tone control code is activated, the samples are always modified.
230 When the tone control code is activated, the samples are always modified.
235 If this switch is on, then the samples for the IEC958 (S/PDIF) digital
237 PCM samples are taken.
241 This control attenuates the samples for the headphone output.
348 digital sound samples can be concurrently loaded
358 Interpolation looping of audio samples in cache connected to