Lines Matching refs:parallel
78 The address of the parallel port where the LCD is connected.
80 The first standard parallel port address is 0x378.
81 The second standard parallel port address is 0x278.
82 The third standard parallel port address is 0x3BC.
88 many parallel ports are present and which address each one has.
101 to the parallel port.
124 For help about how to wire your LCD to the parallel port,
212 parallel port. This driver also features 4 and 6-key keypads. The LCD
221 int "Default parallel port number (0=LPT1)"
225 This is the index of the parallel port the panel is connected to. One
226 driver instance only supports one parallel port, so if your keypad
242 1 = 2x16 parallel LCD, old keypad
244 3 = 2x16 parallel LCD (Hantronix), no keypad
245 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad
246 5 = 2x40 parallel LCD (old one), with old keypad
249 wired to the parallel port, and how it works. This is only intended
258 This enables and configures a keypad connected to the parallel port.
275 This enables and configures an LCD connected to the parallel port.
283 2 : 2x16 & 2x40 parallel LCD (old wiring)
285 4 : 2x16 parallel LCD (Hantronix wiring)
286 5 : 2x16 parallel LCD (Nexcom wiring)
319 and is the case for most parallel LCDs. Other LCDs, and some serial ones,
358 int "LCD communication mode (0=parallel 8 bits, 1=serial)"
362 This driver now supports any serial or parallel LCD wired to a parallel
364 be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires
365 (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals
367 parallel LCD, and 1 for a serial LCD.
375 This describes the number of the parallel port pin to which the LCD 'E'
390 This describes the number of the parallel port pin to which the LCD 'RS'
405 This describes the number of the parallel port pin to which the LCD 'RW'
420 This describes the number of the parallel port pin to which the serial
435 This describes the number of the parallel port pin to which the serial
450 This describes the number of the parallel port pin to which the LCD 'BL' signal