Lines Matching refs:KERN_DEBUG
221 printk(KERN_DEBUG "%s: removed pending cmd_queue entry " in prism2_clear_cmd_queue()
230 printk(KERN_DEBUG "%s: cmd_queue_len (%d) not zero after " in prism2_clear_cmd_queue()
259 printk(KERN_DEBUG "%s: driver bug - re-issuing command @%p\n", in hfa384x_cmd_issue()
273 printk(KERN_DEBUG "%s: hfa384x_cmd_issue: cmd reg was busy " in hfa384x_cmd_issue()
281 printk(KERN_DEBUG "%s: hfa384x_cmd_issue - timeout - " in hfa384x_cmd_issue()
324 printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", in hfa384x_cmd()
412 printk(KERN_DEBUG "%s: hfa384x_cmd: entry still in list? " in hfa384x_cmd()
421 printk(KERN_DEBUG "%s: hfa384x_cmd: interrupted; err=%d\n", in hfa384x_cmd()
429 printk(KERN_DEBUG "%s: hfa384x_cmd: command was not " in hfa384x_cmd()
450 printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x, " in hfa384x_cmd()
493 printk(KERN_DEBUG "%s: hfa384x_cmd: cmd_queue full\n", in hfa384x_cmd_callback()
553 printk(KERN_DEBUG "%s: __hfa384x_cmd_no_wait(%d) - timeout - " in __hfa384x_cmd_no_wait()
595 printk(KERN_DEBUG "%s: hfa384x_cmd_wait - timeout2 - " in hfa384x_cmd_wait()
605 printk(KERN_DEBUG "%s: CMD=0x%04x => res=0x%02x\n", in hfa384x_cmd_wait()
657 printk(KERN_DEBUG "%s: Command completion event, but " in prism2_cmd_ev()
667 printk(KERN_DEBUG "%s: Command completion event, but no " in prism2_cmd_ev()
687 printk(KERN_DEBUG "%s: Invalid command completion type %d\n", in prism2_cmd_ev()
753 printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout before\n", in hfa384x_setup_bap()
764 printk(KERN_DEBUG "%s: hfa384x_setup_bap - timeout after\n", in hfa384x_setup_bap()
772 printk(KERN_DEBUG "%s: hfa384x_setup_bap - offset error " in hfa384x_setup_bap()
796 printk(KERN_DEBUG "%s: cannot get RID %04x (len=%d) - no PRI " in hfa384x_get_rid()
812 printk(KERN_DEBUG "%s: hfa384x_get_rid: CMDCODE_ACCESS failed " in hfa384x_get_rid()
837 printk(KERN_DEBUG "%s: hfa384x_get_rid - RID len mismatch: " in hfa384x_get_rid()
851 printk(KERN_DEBUG "%s: hfa384x_get_rid (rid=%04x, " in hfa384x_get_rid()
874 printk(KERN_DEBUG "%s: cannot set RID %04x (len=%d) - no PRI " in hfa384x_set_rid()
901 printk(KERN_DEBUG "%s: hfa384x_set_rid (rid=%04x, len=%d) - " in hfa384x_set_rid()
911 printk(KERN_DEBUG "%s: hfa384x_set_rid: CMDCODE_ACCESS_WRITE " in hfa384x_set_rid()
967 printk(KERN_DEBUG "%s: cannot allocate fid, len=%d\n", in hfa384x_allocate_fid()
1003 printk(KERN_DEBUG "%s: reset port failed to disable port\n", in prism2_reset_port()
1009 printk(KERN_DEBUG "%s: reset port failed to enable " in prism2_reset_port()
1019 printk(KERN_DEBUG "%s: failed to restore fragmentation " in prism2_reset_port()
1046 printk(KERN_DEBUG "Could not get RID for component %s\n", txt); in prism2_get_version_info()
1305 printk(KERN_DEBUG "%s: init command completed too quickly - " in prism2_hw_init()
1317 printk(KERN_DEBUG "%s: assuming no Primary image in " in prism2_hw_init()
1328 printk(KERN_DEBUG "prism2_hw_init: initialized in %lu ms\n", in prism2_hw_init()
1373 printk(KERN_DEBUG "%s: Failed to read STA f/w version " in prism2_hw_init2()
1393 printk(KERN_DEBUG "%s: Using shorter TX FID " in prism2_hw_init2()
1524 printk(KERN_DEBUG "%s: card already removed or not configured " in prism2_hw_shutdown()
1596 printk(KERN_DEBUG "%s: persistent download of primary " in prism2_hw_reset()
1604 printk(KERN_DEBUG "%s: persistent download of secondary " in prism2_hw_reset()
1628 printk(KERN_DEBUG "%s: scheduled card reset\n", local->dev->name); in handle_reset_queue()
1684 printk(KERN_DEBUG "%s: prism2_transmit_cb - res=0x%02x\n", in prism2_transmit_cb()
1690 printk(KERN_DEBUG "%s: prism2_transmit_cb called with invalid " in prism2_transmit_cb()
1696 printk(KERN_DEBUG "%s: driver bug: prism2_transmit_cb called " in prism2_transmit_cb()
1755 printk(KERN_DEBUG "%s: driver bug - prism2_transmit() called " in prism2_transmit()
1771 printk(KERN_DEBUG "%s: prism2_transmit: CMDCODE_TRANSMIT " in prism2_transmit()
1809 printk(KERN_DEBUG "%s: prism2_tx_80211: hw not ready -" in prism2_tx_80211()
1862 printk(KERN_DEBUG "%s: prism2_tx_80211 - to BAP0 failed\n", in prism2_tx_80211()
1898 printk(KERN_DEBUG "%s: detected fid change (try=%d, reg=%04x):" in prism2_read_fid_reg()
1930 printk(KERN_DEBUG "prism2_rx: rxfid=0 (next 0x%04x)\n", in prism2_rx()
1947 printk(KERN_DEBUG "%s: copy from BAP0 failed %d\n", dev->name, in prism2_rx()
1973 printk(KERN_DEBUG "%s: Received frame with invalid " in prism2_rx()
1983 printk(KERN_DEBUG "%s: RX failed to allocate skb\n", in prism2_rx()
1994 printk(KERN_DEBUG "%s: RX failed to read " in prism2_rx()
2050 printk(KERN_DEBUG "%s: RX: len(%d) > MAX(%d)\n", in hostap_rx_skb()
2139 printk(KERN_DEBUG "TXFIDs:"); in prism2_alloc_ev()
2164 printk(KERN_DEBUG "%s: TX callback - foreign frame\n", in hostap_tx_callback()
2178 printk(KERN_DEBUG "%s: could not find TX callback (idx %d)\n", in hostap_tx_callback()
2187 printk(KERN_DEBUG "%s: hostap_tx_callback failed to allocate " in hostap_tx_callback()
2413 printk(KERN_DEBUG "Could not get info frame (fid=0x%04x)\n", in prism2_info()
2428 printk(KERN_DEBUG "%s: Received info frame with invalid " in prism2_info()
2437 printk(KERN_DEBUG "%s: Could not allocate skb for info " in prism2_info()
2578 printk(KERN_DEBUG "%s: interrupt - SWSUPPORT0=%04x " in prism2_check_magic()
2608 printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n", in prism2_interrupt()
2620 printk(KERN_DEBUG "%s: Interrupt, but dev not OK\n", in prism2_interrupt()
2634 printk(KERN_DEBUG "%s: prism2_interrupt: ev=0xffff\n", in prism2_interrupt()
2660 printk(KERN_DEBUG "%s: prism2_interrupt: hw " in prism2_interrupt()
2752 printk(KERN_DEBUG "%s: defaulting to host-based encryption as " in prism2_check_sta_fw_version()
2768 printk(KERN_DEBUG "%s: defaulting to bogus WDS frame as a " in prism2_check_sta_fw_version()
2794 printk(KERN_DEBUG "%s: passive scan detected pending " in hostap_passive_scan()
2816 printk(KERN_DEBUG "%s: passive scan channel %d\n", in hostap_passive_scan()
3013 printk(KERN_DEBUG "%s: set_tim failed (aid=%d " in handle_set_tim_queue()