Lines Matching refs:to
3 # This file describes the settings to be used by the documentation system
37 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
56 # the logo to the output directory.
60 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
62 # entered, it will be relative to the location where doxygen was started. If
67 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
79 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
80 # characters to appear in the names of generated files. If set to NO, non-ASCII
87 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
89 # information to generate all constant output in the proper language.
102 # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
104 # documentation (similar to Javadoc). Set to NO to disable this.
109 # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
112 # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
119 # used to form the text in various listings. Each string in this list, if found
129 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
136 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
144 # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
145 # before files name in the file list and in the header files. If set to NO the
151 # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
153 # part of the path. The tag can be used to show relative paths in the file list.
154 # If left blank the directory from which doxygen is run is used as the path to
159 # This tag requires that the tag FULL_PATH_NAMES is set to YES.
163 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
165 # header file to include in order to use a class. If left blank only the name of
167 # specify the list of include paths that are normally passed to the compiler
172 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
179 # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
181 # description. If set to NO, the Javadoc-style will behave just like regular Qt-
188 # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
190 # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
196 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
198 # a brief description. This used to be the default behavior. The new default is
199 # to treat a multi-line C++ comment block as a detailed description. Set this
200 # tag to YES if you prefer the old behavior instead.
202 # Note that setting this tag to YES also means that rational rose comments are
208 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
214 # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
215 # page for each member. If set to NO, the documentation of a member will be part
221 # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
222 # uses this value to replace tabs by spaces in code fragments.
227 # This tag can be used to specify a number of aliases that act as commands in
232 # will allow you to put the command \sideeffect (or @sideeffect) in the
234 # "Side Effects:". You can put \n's in the value part of an alias to insert
236 # alias to insert a newline as if a physical newline was in the original file.
241 # This tag can be used to specify a number of word-keyword mappings (TCL only).
243 # will allow you to use the command class in the itcl::class meaning.
247 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
255 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
263 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
269 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
275 # Doxygen selects the parser to use depending on the extension of the files it
276 # parses. With this tag you can assign which parser to use for a given
282 # Fortran. In the later case the parser tries to guess whether the code is fixed
284 # instance to make doxygen treat .inc files as Fortran files (default is PHP),
289 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
295 # according to the Markdown format, which allows for more readable
304 # When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
305 # to that level are automatically included in the table of contents, even if
307 # Note: This feature currently applies only to Markdown headings.
309 # This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
313 # When enabled doxygen tries to link words that correspond to documented
314 # classes, or namespaces to their corresponding documentation. Such a link can
316 # globally by setting AUTOLINK_SUPPORT to NO.
322 # to include (a tag file for) the STL sources as input, then you should set this
323 # tag to YES in order to let doxygen match functions declarations and
331 # If you use Microsoft's C++/CLI language, you should set this option to YES to
337 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
345 # For Microsoft's IDL there are propget and propput attributes to indicate
346 # getter and setter methods for a property. Setting this option to YES will make
347 # doxygen to replace the get and set methods by a property in the documentation.
349 # type. If this is not the case, or you want to show the methods anyway, you
350 # should set this option to NO.
356 # tag is set to YES then doxygen will reuse the documentation of the first
363 # If one adds a struct or class to a group and this option is enabled, then also
364 # any nested class or struct is added to the same group. By default this option
365 # is disabled and one has to add nested compounds explicitly via \ingroup.
370 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
371 # (for instance a group of public functions) to be put as a subgroup of that
372 # type (e.g. under the Public Functions section). Set it to NO to prevent
379 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
390 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
394 # to NO, structs, classes, and unions are shown on a separate page (for HTML and
412 # cache is used to resolve symbols given their name and scope. Since this can be
417 # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
428 # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
431 # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
433 # normally produced when WARNINGS is set to YES.
438 # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
444 # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
450 # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
456 # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
457 # locally in source files will be included in the documentation. If set to NO,
464 # This flag is only useful for Objective-C code. If set to YES, local methods,
466 # included in the documentation. If set to NO, only methods in the interface are
472 # If this flag is set to YES, the members of anonymous namespaces will be
481 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
482 # undocumented members inside documented classes or files. If set to NO these
489 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
491 # to NO, these classes will be included in the various overviews. This option
497 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
498 # (class|struct|union) declarations. If set to NO, these declarations will be
504 # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
505 # documentation blocks found inside the body of a function. If set to NO, these
506 # blocks will be appended to the function's detailed documentation block.
512 # \internal command is included. If the tag is set to NO then the documentation
513 # will be excluded. Set it to YES to include the internal documentation.
518 # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
519 # names in lower-case letters. If set to YES, upper-case letters are also
522 # and Mac users are advised to set this option to NO.
527 # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
528 # their full class and namespace scopes in the documentation. If set to YES, the
534 # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
535 # append additional text to a page's title, such as Class Reference. If set to
541 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
547 # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
548 # grouped member an include statement to the documentation, telling the reader
549 # which file to include in order to use the member.
554 # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
560 # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
566 # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
568 # name. If set to NO, the members will appear in declaration order.
573 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
575 # name. If set to NO, the members will appear in declaration order. Note that
581 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
583 # destructors are listed first. If set to NO the constructors will appear in the
585 # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
587 # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
593 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
594 # of group names into alphabetical order. If set to NO the group names will
600 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
601 # fully-qualified names, including namespaces. If set to NO, the class list will
603 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
604 # Note: This option applies only to the class list, not to the alphabetical
610 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
613 # only one candidate or it is obvious which candidate to choose by doing a
620 # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
626 # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
632 # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
638 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
645 # The ENABLED_SECTIONS tag can be used to enable conditional documentation
652 # initial value of a variable or macro / define can have for it to appear in the
654 # it will be hidden. Use a value of 0 to hide initializers completely. The
662 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
663 # the bottom of the documentation of classes and structs. If set to YES, the
664 # list will mention the files that were used to generate the documentation.
669 # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
676 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
683 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
684 # doxygen should invoke to get the current version for each file (typically from
688 # by doxygen. Whatever the program writes to standard output is used as the file
693 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
706 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
709 # to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
712 # search path. See also \cite for info how to create references.
717 # Configuration options related to warning and progress messages
720 # The QUIET tag can be used to turn on/off the messages that are generated to
721 # standard output by doxygen. If QUIET is set to YES this implies that the
727 # The WARNINGS tag can be used to turn on/off the warning messages that are
728 # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
736 # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
737 # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
743 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
751 # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
753 # value. If set to NO, doxygen will only warn about wrong or incomplete
759 # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
775 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
776 # messages should be written. If left blank the output is written to standard
782 # Configuration options related to the input files
785 # The INPUT tag is used to specify the files and/or directories that contain
802 # This tag can be used to specify the character encoding of the source files
812 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
813 # *.h) to filter out the source-files in the directories.
816 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
828 # The RECURSIVE tag can be used to specify whether or not subdirectories should
834 # The EXCLUDE tag can be used to specify files and/or directories that should be
838 # Note that relative paths are relative to the directory from which doxygen is
843 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
851 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
854 # Note that the wildcards are matched against the file with absolute path, so to
859 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
865 # Note that the wildcards are matched against the file with absolute path, so to
870 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
877 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
878 # *.h) to filter out the source-files in the directories. If left blank all
883 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
884 # searched for input files to be used with the \include or \dontinclude commands
890 # The IMAGE_PATH tag can be used to specify one or more files or directories
891 # that contain images that are to be included in the documentation (see the
896 # The INPUT_FILTER tag can be used to specify a program that doxygen should
897 # invoke to filter for each input file. Doxygen will invoke the filter program
904 # program writes to standard output. If FILTER_PATTERNS is specified, this tag
912 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
917 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
925 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
930 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
931 # INPUT_FILTER) will also be used to filter the input files that are used for
932 # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
937 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
939 # it is also possible to disable source filtering for a specific pattern using
941 # This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
945 # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
948 # and want to reuse the introduction page also for the doxygen output.
953 # Configuration options related to source browsing
956 # If the SOURCE_BROWSER tag is set to YES then a list of source files will be
960 # also VERBATIM_HEADERS is set to NO.
965 # Setting the INLINE_SOURCES tag to YES will include the body of functions,
971 # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
978 # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
984 # If the REFERENCES_RELATION tag is set to YES then for each documented function
990 # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
991 # to YES then the hyperlinks from functions in REFERENCES_RELATION and
992 # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
993 # link to the documentation.
1000 # brief description and links to the definition and documentation. Since this
1002 # can opt to disable this feature.
1004 # This tag requires that the tag SOURCE_BROWSER is set to YES.
1008 # If the USE_HTAGS tag is set to YES then the references to source code will
1009 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
1017 # - Make sure the INPUT points to the root of the source tree
1023 # The result: instead of the source browser generated by doxygen, the links to
1024 # source code will now point to the output of htags.
1026 # This tag requires that the tag SOURCE_BROWSER is set to YES.
1032 # specified. Set to NO to disable this.
1038 # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
1053 # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
1058 # path to the compilation database (see:
1060 # were built. This is equivalent to specifying the "-p" option to a clang tool,
1061 # such as clang-check. These options will then be passed to the parser.
1069 # Configuration options related to the alphabetical class index
1072 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
1079 # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
1082 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1088 # can be used to specify a prefix (or a list of prefixes) that should be ignored
1090 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1095 # Configuration options related to the HTML output
1098 # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
1103 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
1107 # This tag requires that the tag GENERATE_HTML is set to YES.
1111 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
1114 # This tag requires that the tag GENERATE_HTML is set to YES.
1118 # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
1124 # the setting GENERATE_TREEVIEW). It is highly recommended to start with a
1129 # for information on how to generate the default header that doxygen normally
1131 # Note: The header is subject to change so you typically have to regenerate the
1132 # default header when upgrading to a newer version of doxygen. For a description
1134 # This tag requires that the tag GENERATE_HTML is set to YES.
1138 # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
1140 # footer. See HTML_HEADER for more information on how to generate a default
1142 # section "Doxygen usage" for information on how to generate the default footer
1144 # This tag requires that the tag GENERATE_HTML is set to YES.
1148 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
1149 # sheet that is used by each HTML page. It can be used to fine-tune the look of
1151 # See also section "Doxygen usage" for information on how to generate the style
1153 # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
1156 # This tag requires that the tag GENERATE_HTML is set to YES.
1160 # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1165 # Doxygen will copy the style sheet files to the output directory.
1169 # This tag requires that the tag GENERATE_HTML is set to YES.
1173 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
1174 # other source files which should be copied to the HTML output directory. Note
1175 # that these files will be copied to the base HTML output directory. Use the
1176 # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1179 # This tag requires that the tag GENERATE_HTML is set to YES.
1184 # will adjust the colors in the style sheet and background images according to
1190 # This tag requires that the tag GENERATE_HTML is set to YES.
1198 # This tag requires that the tag GENERATE_HTML is set to YES.
1202 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
1209 # This tag requires that the tag GENERATE_HTML is set to YES.
1213 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1215 # to YES can help to show when doxygen was last run and thus if the
1216 # documentation is up to date.
1218 # This tag requires that the tag GENERATE_HTML is set to YES.
1222 # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
1226 # page. Disable this option to support browsers that do not have Javascript,
1229 # This tag requires that the tag GENERATE_HTML is set to YES.
1233 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1237 # This tag requires that the tag GENERATE_HTML is set to YES.
1243 # and collapse entries dynamically later on. Doxygen will expand the tree to
1250 # This tag requires that the tag GENERATE_HTML is set to YES.
1254 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
1264 # This tag requires that the tag GENERATE_HTML is set to YES.
1272 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1278 # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
1280 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1288 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1294 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1298 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
1312 # This tag requires that the tag GENERATE_HTML is set to YES.
1316 # The CHM_FILE tag can be used to specify the file name of the resulting .chm
1318 # written to the html output directory.
1319 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1323 # The HHC_LOCATION tag can be used to specify the location (absolute path
1325 # doxygen will try to run the HTML help compiler on the generated index.hhp.
1326 # The file has to be specified with full path.
1327 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1334 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1338 # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
1340 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1348 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1352 # The TOC_EXPAND flag can be set to YES to add extra items for group members to
1353 # the table of contents of the HTML help documentation and to the tree view.
1355 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1359 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1361 # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
1364 # This tag requires that the tag GENERATE_HTML is set to YES.
1368 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
1369 # the file name of the resulting .qch file. The path specified is relative to
1371 # This tag requires that the tag GENERATE_QHP is set to YES.
1375 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
1379 # This tag requires that the tag GENERATE_QHP is set to YES.
1383 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
1387 # This tag requires that the tag GENERATE_QHP is set to YES.
1392 # filter to add. For more information please see Qt Help Project / Custom
1394 # This tag requires that the tag GENERATE_QHP is set to YES.
1399 # custom filter to add. For more information please see Qt Help Project / Custom
1401 # This tag requires that the tag GENERATE_QHP is set to YES.
1408 # This tag requires that the tag GENERATE_QHP is set to YES.
1412 # The QHG_LOCATION tag can be used to specify the location of Qt's
1413 # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
1415 # This tag requires that the tag GENERATE_QHP is set to YES.
1419 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
1423 # to be copied into the plugins directory of eclipse. The name of the directory
1425 # After copying Eclipse needs to be restarted before the help appears.
1427 # This tag requires that the tag GENERATE_HTML is set to YES.
1435 # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
1440 # be necessary to disable the index and replace it with your own. The
1441 # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
1444 # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
1446 # This tag requires that the tag GENERATE_HTML is set to YES.
1452 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1453 # structure should be generated to display hierarchical information. If the tag
1454 # value is set to YES, a side panel will be generated containing a tree-like
1456 # to work a browser that supports JavaScript, DHTML, CSS and frames is required
1460 # sheet generated by doxygen has an example that shows how to put an image at
1463 # DISABLE_INDEX to YES when enabling this option.
1465 # This tag requires that the tag GENERATE_HTML is set to YES.
1469 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
1475 # This tag requires that the tag GENERATE_HTML is set to YES.
1480 # to set the initial width (in pixels) of the frame in which the tree is shown.
1482 # This tag requires that the tag GENERATE_HTML is set to YES.
1486 # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
1489 # This tag requires that the tag GENERATE_HTML is set to YES.
1493 # Use this tag to change the font size of LaTeX formulas included as images in
1495 # doxygen run you need to manually remove any form_*.png images from the HTML
1496 # output directory to force them to be regenerated.
1498 # This tag requires that the tag GENERATE_HTML is set to YES.
1502 # Use the FORMULA_TRANSPARENT tag to determine whether or not the images
1506 # Note that when changing this option you need to delete any form_*.png files in
1509 # This tag requires that the tag GENERATE_HTML is set to YES.
1513 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
1516 # installed or if you want to formulas look prettier in the HTML output. When
1517 # enabled you may also need to install MathJax separately and configure the path
1518 # to it using the MATHJAX_RELPATH option.
1520 # This tag requires that the tag GENERATE_HTML is set to YES.
1524 # When MathJax is enabled you can set the default output format to be used for
1530 # This tag requires that the tag USE_MATHJAX is set to YES.
1534 # When MathJax is enabled you need to specify the location relative to the HTML
1538 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
1540 # MathJax. However, it is strongly recommended to install a local copy of
1543 # This tag requires that the tag USE_MATHJAX is set to YES.
1547 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
1550 # This tag requires that the tag USE_MATHJAX is set to YES.
1554 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
1558 # This tag requires that the tag USE_MATHJAX is set to YES.
1568 # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
1569 # search using the keyboard; to jump to the search box use <access key> + S
1572 # key> to jump into the search results window, the results can be navigated
1573 # using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
1576 # to select a filter and <Enter> or <escape> to activate or cancel the filter
1579 # This tag requires that the tag GENERATE_HTML is set to YES.
1588 # and searching needs to be provided by external tools. See the section
1591 # This tag requires that the tag SEARCHENGINE is set to YES.
1596 # script for searching. Instead the search results are written to an XML file
1597 # which needs to be processed by an external indexer. Doxygen will invoke an
1598 # external search engine pointed to by the SEARCHENGINE_URL option to obtain the
1607 # This tag requires that the tag SEARCHENGINE is set to YES.
1611 # The SEARCHENGINE_URL should point to a search engine hosted by a web server
1618 # This tag requires that the tag SEARCHENGINE is set to YES.
1623 # search data is written to a file for indexing by an external tool. With the
1626 # This tag requires that the tag SEARCHENGINE is set to YES.
1632 # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
1633 # projects and redirect the results back to the right project.
1634 # This tag requires that the tag SEARCHENGINE is set to YES.
1638 # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1640 # all added to the same external search index. Each project needs to have a
1642 # to a relative location where the documentation can be found. The format is:
1644 # This tag requires that the tag SEARCHENGINE is set to YES.
1649 # Configuration options related to the LaTeX output
1652 # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
1657 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
1661 # This tag requires that the tag GENERATE_LATEX is set to YES.
1665 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1670 # written to the output directory.
1672 # This tag requires that the tag GENERATE_LATEX is set to YES.
1676 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
1679 # This tag requires that the tag GENERATE_LATEX is set to YES.
1683 # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
1684 # documents. This may be useful for small projects and may help to save some
1687 # This tag requires that the tag GENERATE_LATEX is set to YES.
1691 # The PAPER_TYPE tag can be used to set the paper type that is used by the
1696 # This tag requires that the tag GENERATE_LATEX is set to YES.
1700 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
1702 # by its name or with the correct syntax as to be used with the LaTeX
1708 # This tag requires that the tag GENERATE_LATEX is set to YES.
1712 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
1715 # section "Doxygen usage" for information on how to let doxygen write the
1716 # default header to a separate file.
1723 # to HTML_HEADER.
1724 # This tag requires that the tag GENERATE_LATEX is set to YES.
1728 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
1731 # LATEX_HEADER for more information on how to generate a default footer and what
1735 # This tag requires that the tag GENERATE_LATEX is set to YES.
1739 # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1742 # will copy the style sheet files to the output directory.
1746 # This tag requires that the tag GENERATE_LATEX is set to YES.
1750 # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
1751 # other source files which should be copied to the LATEX_OUTPUT output
1754 # This tag requires that the tag GENERATE_LATEX is set to YES.
1758 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
1759 # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
1763 # This tag requires that the tag GENERATE_LATEX is set to YES.
1767 # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
1768 # the PDF file directly from the LaTeX files. Set this option to YES, to get a
1771 # This tag requires that the tag GENERATE_LATEX is set to YES.
1775 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
1776 # command to the generated LaTeX files. This will instruct LaTeX to keep running
1780 # This tag requires that the tag GENERATE_LATEX is set to YES.
1784 # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
1787 # This tag requires that the tag GENERATE_LATEX is set to YES.
1791 # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
1797 # This tag requires that the tag GENERATE_LATEX is set to YES.
1801 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1805 # This tag requires that the tag GENERATE_LATEX is set to YES.
1809 # If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
1811 # to NO can help when comparing the output of multiple runs.
1813 # This tag requires that the tag GENERATE_LATEX is set to YES.
1818 # Configuration options related to the RTF output
1821 # If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
1828 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
1832 # This tag requires that the tag GENERATE_RTF is set to YES.
1836 # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
1837 # documents. This may be useful for small projects and may help to save some
1840 # This tag requires that the tag GENERATE_RTF is set to YES.
1844 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
1852 # This tag requires that the tag GENERATE_RTF is set to YES.
1856 # Load stylesheet definitions from file. Syntax is similar to doxygen's config
1857 # file, i.e. a series of assignments. You only have to provide replacements,
1858 # missing definitions are set to their default value.
1860 # See also section "Doxygen usage" for information on how to generate the
1862 # This tag requires that the tag GENERATE_RTF is set to YES.
1867 # similar to doxygen's config file. A template extensions file can be generated
1869 # This tag requires that the tag GENERATE_RTF is set to YES.
1873 # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
1879 # This tag requires that the tag GENERATE_RTF is set to YES.
1884 # Configuration options related to the man page output
1887 # If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
1893 # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
1898 # This tag requires that the tag GENERATE_MAN is set to YES.
1902 # The MAN_EXTENSION tag determines the extension that is added to the generated
1907 # This tag requires that the tag GENERATE_MAN is set to YES.
1912 # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
1914 # This tag requires that the tag GENERATE_MAN is set to YES.
1918 # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
1921 # them the man command would be unable to find the correct page.
1923 # This tag requires that the tag GENERATE_MAN is set to YES.
1928 # Configuration options related to the XML output
1931 # If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
1937 # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
1941 # This tag requires that the tag GENERATE_XML is set to YES.
1945 # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
1946 # listings (including syntax highlighting and cross-referencing information) to
1950 # This tag requires that the tag GENERATE_XML is set to YES.
1955 # Configuration options related to the DOCBOOK output
1958 # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
1959 # that can be used to generate PDF.
1964 # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
1968 # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1972 # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
1974 # information) to the DOCBOOK output. Note that enabling this will significantly
1977 # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1985 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
1994 # Configuration options related to the Perl module output
1997 # If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
2005 # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
2006 # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
2009 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
2013 # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
2014 # formatted so it can be parsed by a human reader. This is useful if you want to
2015 # understand what is going on. On the other hand, if this tag is set to NO, the
2019 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
2027 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
2032 # Configuration options related to the preprocessor
2035 # If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
2041 # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
2042 # in the source code. If set to NO, only conditional compilation will be
2044 # EXPAND_ONLY_PREDEF to YES.
2046 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2050 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
2051 # the macro expansion is limited to the macros specified with the PREDEFINED and
2054 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2058 # If the SEARCH_INCLUDES tag is set to YES, the include files in the
2061 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2065 # The INCLUDE_PATH tag can be used to specify one or more directories that
2068 # This tag requires that the tag SEARCH_INCLUDES is set to YES.
2072 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
2073 # patterns (like *.h and *.hpp) to filter out the header-files in the
2076 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2080 # The PREDEFINED tag can be used to specify one or more macro names that are
2081 # defined before the preprocessor is started (similar to the -D option of e.g.
2086 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2115 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
2116 # tag can be used to specify a list of macro names that should be expanded. The
2118 # tag if you want to use a different macro definition that overrules the
2120 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2124 # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
2125 # remove all references to function-like macros that are alone on a line, have
2130 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2135 # Configuration options related to external references
2138 # The TAGFILES tag can be used to specify one or more tag files. For each tag
2145 # section "Linking to external documentation" for more information about the use
2149 # run, you must also specify the path to the tagfile here.
2154 # tag file that is based on the input files it reads. See section "Linking to
2161 # If the ALLEXTERNALS tag is set to YES, all external class will be listed in
2162 # the class index. If set to NO, only the inherited external classes will be
2168 # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
2169 # in the modules index. If set to NO, only the current project's groups will be
2175 # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
2176 # the related pages index. If set to NO, only the current project's pages will
2189 # Configuration options related to the dot tool
2192 # If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
2193 # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
2195 # disabled, but it is recommended to install and use dot, since it yields more
2203 # http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
2204 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
2205 # the mscgen tool resides. If left empty the tool is assumed to be found in the
2211 # then run dia to produce the diagram and insert it in the documentation. The
2212 # DIA_PATH tag allows you to specify the directory where the dia binary resides.
2213 # If left empty dia is assumed to be found in the default search path.
2217 # If set to YES the inheritance and collaboration graphs will hide inheritance
2223 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
2227 # set to NO
2233 # to run in parallel. When set to 0 doxygen will base this on the number of
2234 # processors available in the system. You can set it explicitly to a value
2235 # larger than 0 to get control over the balance between CPU load and processing
2238 # This tag requires that the tag HAVE_DOT is set to YES.
2243 # generates you can specify the font name using DOT_FONTNAME. You need to make
2244 # sure dot is able to find the font, which can be done by putting it in a
2246 # setting DOT_FONTPATH to the directory containing the font.
2248 # This tag requires that the tag HAVE_DOT is set to YES.
2252 # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
2255 # This tag requires that the tag HAVE_DOT is set to YES.
2259 # By default doxygen will tell dot to use the default font as specified with
2262 # This tag requires that the tag HAVE_DOT is set to YES.
2266 # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
2268 # Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
2270 # This tag requires that the tag HAVE_DOT is set to YES.
2274 # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
2279 # This tag requires that the tag HAVE_DOT is set to YES.
2283 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
2286 # This tag requires that the tag HAVE_DOT is set to YES.
2290 # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
2291 # collaboration diagrams in a style similar to the OMG's Unified Modeling
2294 # This tag requires that the tag HAVE_DOT is set to YES.
2300 # become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
2301 # number of items for each type to make the size more manageable. Set this to 0
2303 # is enforced. So when you set the threshold to 10, up to 15 fields may appear,
2304 # but if the number exceeds 15, the total amount of fields shown is limited to
2307 # This tag requires that the tag HAVE_DOT is set to YES.
2311 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
2315 # This tag requires that the tag HAVE_DOT is set to YES.
2319 # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
2324 # This tag requires that the tag HAVE_DOT is set to YES.
2329 # set to YES then doxygen will generate a graph for each documented file showing
2333 # This tag requires that the tag HAVE_DOT is set to YES.
2337 # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
2341 # So in most cases it will be better to enable call graphs for selected
2345 # This tag requires that the tag HAVE_DOT is set to YES.
2349 # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
2353 # So in most cases it will be better to enable caller graphs for selected
2357 # This tag requires that the tag HAVE_DOT is set to YES.
2361 # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
2364 # This tag requires that the tag HAVE_DOT is set to YES.
2368 # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
2373 # This tag requires that the tag HAVE_DOT is set to YES.
2377 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
2381 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
2382 # to make the SVG files visible in IE 9+ (other browsers do not have this
2388 # This tag requires that the tag HAVE_DOT is set to YES.
2392 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
2397 # Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
2400 # This tag requires that the tag HAVE_DOT is set to YES.
2404 # The DOT_PATH tag can be used to specify the path where the dot tool can be
2406 # This tag requires that the tag HAVE_DOT is set to YES.
2410 # The DOTFILE_DIRS tag can be used to specify one or more directories that
2413 # This tag requires that the tag HAVE_DOT is set to YES.
2417 # The MSCFILE_DIRS tag can be used to specify one or more directories that
2423 # The DIAFILE_DIRS tag can be used to specify one or more directories that
2429 # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
2437 # When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
2447 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
2455 # This tag requires that the tag HAVE_DOT is set to YES.
2459 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
2462 # further from the root node will be omitted. Note that setting this option to 1
2467 # This tag requires that the tag HAVE_DOT is set to YES.
2471 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
2473 # to support this out of the box.
2475 # Warning: Depending on the platform used, enabling this option may lead to
2476 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
2479 # This tag requires that the tag HAVE_DOT is set to YES.
2483 # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
2488 # This tag requires that the tag HAVE_DOT is set to YES.
2492 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
2496 # This tag requires that the tag HAVE_DOT is set to YES.
2500 # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
2501 # files that are used to generate the various graphs.
2503 # This tag requires that the tag HAVE_DOT is set to YES.