Lines Matching refs:number
40 a `-` for negative numbers. Alternatively, a hexadecimal number may be
41 used by prefixing the number with `0x`, or an octal number may be used
266 the number of allowed CPUs. When running on platforms that can guarantee a
295 * `DPS` represents the number of data bits, the parity, and the number
297 * `D` is an integer between 5 and 8 for the number of data bits.
304 * `S` is an integer 1 or 2 for the number of stop bits.
307 * `<irq>` is the IRQ number to use, or `0` to use the UART in poll
345 * `irq` - IRQ number to use
352 * `stop-bits` - only accepts 1 or 2 for the number of stop bits
544 Specify the number of bits to use for the fractional part of the
552 Specify the number of bits to use to represent the length of the
595 Specify the USB controller to use, either by instance number (when going
603 Limits the number lines printed in Xen stack traces.
629 The number of VCPUs to give to dom0. This number of VCPUs can be more
630 than the number of PCPUs on the host. The default is the number of
637 Gives dom0 a number of VCPUs equal to the number of PCPUs, but always
785 > `= [<domU number>][,<dom0 number>]`
789 Change the number of PIRQs available for guests. The optional first number is
790 common for all domUs, while the optional second number (preceded by a comma)
863 >> gets dirty, and therefore significantly reducing number of EPT violation
887 Specify the maximum number of frames which any domain may use as part
900 Specify the maximum number of frames to use as part of a domains
1223 Specifies the number of interrupts to be use for pin (IO-APIC or legacy PIC)
1232 Specifies the number of ARM GICv3 LPI interrupts to allocate on the host,
1233 presented as the number of bits needed to encode it. This must be at least
1658 enforces the maximum theoretically necessary timeout of 670ms. Any number
1771 should be a hexadecimal number)
1790 Specify the maximum number of retries before an enlightened Windows