config CAN_CTUCANFD tristate "CTU CAN-FD IP core" if COMPILE_TEST help This driver adds support for the CTU CAN FD open-source IP core. More documentation and core sources at project page (https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core). The core integration to Xilinx Zynq system as platform driver is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top). Implementation on Intel FPGA-based PCI Express board is available from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd) and on Intel SoC from project (https://gitlab.fel.cvut.cz/canbus/intel-soc-ctucanfd). Guidepost CTU FEE CAN bus projects page https://canbus.pages.fel.cvut.cz/ . config CAN_CTUCANFD_PCI tristate "CTU CAN-FD IP core PCI/PCIe driver" depends on PCI select CAN_CTUCANFD help This driver adds PCI/PCIe support for CTU CAN-FD IP core. The project providing FPGA design for Intel EP4CGX15 based DB4CGX15 PCIe board with PiKRON.com designed transceiver riser shield is available at https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd . config CAN_CTUCANFD_PLATFORM tristate "CTU CAN-FD IP core platform (FPGA, SoC) driver" depends on HAS_IOMEM && OF select CAN_CTUCANFD help The core has been tested together with OpenCores SJA1000 modified to be CAN FD frames tolerant on MicroZed Zynq based MZ_APO education kits designed by Petr Porazil from PiKRON.com company. FPGA design https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top. The kit description at the Computer Architectures course pages https://cw.fel.cvut.cz/wiki/courses/b35apo/documentation/mz_apo/start .