/*
 * Copyright Linux Kernel Team
 *
 * SPDX-License-Identifier: GPL-2.0-only
 *
 * This file is derived from an intermediate build stage of the
 * Linux kernel. The licenses of all input files to this process
 * are compatible with GPL-2.0-only.
 */

/dts-v1/;

/ {
	interrupt-parent = <0x01>;
	#address-cells = <0x02>;
	#size-cells = <0x02>;
	compatible = "hardkernel,odroid-c4\0amlogic,sm1";
	model = "Hardkernel ODROID-C4";

	aliases {
		mmc0 = "/soc/sd@ffe05000";
		mmc1 = "/soc/mmc@ffe07000";
		mmc2 = "/soc/sd@ffe03000";
		serial0 = "/soc/bus@ff800000/serial@3000";
		ethernet0 = "/soc/ethernet@ff3f0000";
	};

	chosen {
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;
		stdout-path = "serial0:115200n8";

		framebuffer-cvbs {
			compatible = "amlogic,simple-framebuffer\0simple-framebuffer";
			amlogic,pipeline = "vpu-cvbs";
			clocks = <0x02 0xa8 0x02 0x35 0x02 0x3a>;
			status = "disabled";
			power-domains = <0x03 0x00>;
		};

		framebuffer-hdmi {
			compatible = "amlogic,simple-framebuffer\0simple-framebuffer";
			amlogic,pipeline = "vpu-hdmi";
			clocks = <0x02 0xa8 0x02 0x35 0x02 0x3a>;
			status = "disabled";
			power-domains = <0x03 0x00>;
		};
	};

	efuse {
		compatible = "amlogic,meson-gxbb-efuse";
		clocks = <0x02 0x6a>;
		#address-cells = <0x01>;
		#size-cells = <0x01>;
		read-only;
		secure-monitor = <0x04>;
	};

	gpu-opp-table {
		compatible = "operating-points-v2";
		phandle = <0x38>;

		opp-124999998 {
			opp-hz = <0x00 0x773593e>;
			opp-microvolt = <0xc3500>;
		};

		opp-249999996 {
			opp-hz = <0x00 0xee6b27c>;
			opp-microvolt = <0xc3500>;
		};

		opp-285714281 {
			opp-hz = <0x00 0x1107a769>;
			opp-microvolt = <0xc3500>;
		};

		opp-399999994 {
			opp-hz = <0x00 0x17d783fa>;
			opp-microvolt = <0xc3500>;
		};

		opp-499999992 {
			opp-hz = <0x00 0x1dcd64f8>;
			opp-microvolt = <0xc3500>;
		};

		opp-666666656 {
			opp-hz = <0x00 0x27bc86a0>;
			opp-microvolt = <0xc3500>;
		};

		opp-799999987 {
			opp-hz = <0x00 0x2faf07f3>;
			opp-microvolt = <0xc3500>;
		};
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	reserved-memory {
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		secmon@5000000 {
			reg = <0x00 0x5000000 0x00 0x300000>;
			no-map;
		};

		linux,cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x00 0x10000000>;
			alignment = <0x00 0x400000>;
			linux,cma-default;
		};
	};

	secure-monitor {
		compatible = "amlogic,meson-gxbb-sm";
		phandle = <0x04>;
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		pcie@fc000000 {
			compatible = "amlogic,g12a-pcie\0snps,dw-pcie";
			reg = <0x00 0xfc000000 0x00 0x400000 0x00 0xff648000 0x00 0x2000 0x00 0xfc400000 0x00 0x200000>;
			reg-names = "elbi\0cfg\0config";
			interrupts = <0x00 0xdd 0x04>;
			#interrupt-cells = <0x01>;
			interrupt-map-mask = <0x00 0x00 0x00 0x00>;
			interrupt-map = <0x00 0x00 0x00 0x00 0x01 0x00 0xdf 0x04>;
			bus-range = <0x00 0xff>;
			#address-cells = <0x03>;
			#size-cells = <0x02>;
			device_type = "pci";
			ranges = <0x81000000 0x00 0x00 0x00 0xfc600000 0x00 0x100000 0x82000000 0x00 0xfc700000 0x00 0xfc700000 0x00 0x1900000>;
			clocks = <0x02 0x30 0x02 0x2d 0x02 0xc9>;
			clock-names = "general\0pclk\0port";
			resets = <0x05 0x0c 0x05 0x0f>;
			reset-names = "port\0apb";
			num-lanes = <0x01>;
			phys = <0x06 0x02>;
			phy-names = "pcie";
			status = "disabled";
			power-domains = <0x03 0x03>;
		};

		thermal-zones {

			cpu-thermal {
				polling-delay = <0x3e8>;
				polling-delay-passive = <0x64>;
				thermal-sensors = <0x07>;

				trips {

					cpu-passive {
						temperature = <0x14c08>;
						hysteresis = <0x7d0>;
						type = "passive";
						phandle = <0x08>;
					};

					cpu-hot {
						temperature = <0x17318>;
						hysteresis = <0x7d0>;
						type = "hot";
						phandle = <0x0d>;
					};

					cpu-critical {
						temperature = <0x1adb0>;
						hysteresis = <0x7d0>;
						type = "critical";
					};
				};

				cooling-maps {

					map0 {
						trip = <0x08>;
						cooling-device = <0x09 0xffffffff 0xffffffff 0x0a 0xffffffff 0xffffffff 0x0b 0xffffffff 0xffffffff 0x0c 0xffffffff 0xffffffff>;
					};

					map1 {
						trip = <0x0d>;
						cooling-device = <0x09 0xffffffff 0xffffffff 0x0a 0xffffffff 0xffffffff 0x0b 0xffffffff 0xffffffff 0x0c 0xffffffff 0xffffffff>;
					};
				};
			};

			ddr-thermal {
				polling-delay = <0x3e8>;
				polling-delay-passive = <0x64>;
				thermal-sensors = <0x0e>;

				trips {

					ddr-passive {
						temperature = <0x14c08>;
						hysteresis = <0x7d0>;
						type = "passive";
						phandle = <0x0f>;
					};

					ddr-critical {
						temperature = <0x1adb0>;
						hysteresis = <0x7d0>;
						type = "critical";
					};
				};

				cooling-maps {

					map {
						trip = <0x0f>;
						cooling-device = <0x10 0xffffffff 0xffffffff>;
					};
				};
			};
		};

		ethernet@ff3f0000 {
			compatible = "amlogic,meson-g12a-dwmac\0snps,dwmac-3.70a\0snps,dwmac";
			reg = <0x00 0xff3f0000 0x00 0x10000 0x00 0xff634540 0x00 0x08>;
			interrupts = <0x00 0x08 0x04>;
			interrupt-names = "macirq";
			clocks = <0x02 0x26 0x02 0x02 0x02 0x0d 0x02 0x02>;
			clock-names = "stmmaceth\0clkin0\0clkin1\0timing-adjustment";
			rx-fifo-depth = <0x1000>;
			tx-fifo-depth = <0x800>;
			status = "okay";
			power-domains = <0x03 0x06>;
			pinctrl-0 = <0x11 0x12>;
			pinctrl-names = "default";
			phy-mode = "rgmii";
			phy-handle = <0x13>;
			amlogic,tx-delay-ns = <0x02>;

			mdio {
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				compatible = "snps,dwmac-mdio";
				phandle = <0x1e>;
			};
		};

		bus@ff600000 {
			compatible = "simple-bus";
			reg = <0x00 0xff600000 0x00 0x200000>;
			#address-cells = <0x02>;
			#size-cells = <0x02>;
			ranges = <0x00 0x00 0x00 0xff600000 0x00 0x200000>;

			hdmi-tx@0 {
				compatible = "amlogic,meson-g12a-dw-hdmi";
				reg = <0x00 0x00 0x00 0x10000>;
				interrupts = <0x00 0x39 0x01>;
				resets = <0x05 0x13 0x05 0x42 0x05 0x4f>;
				reset-names = "hdmitx_apb\0hdmitx\0hdmitx_phy";
				clocks = <0x02 0xa8 0x02 0x35 0x02 0x3a>;
				clock-names = "isfr\0iahb\0venci";
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				#sound-dai-cells = <0x00>;
				status = "okay";
				pinctrl-0 = <0x14 0x15>;
				pinctrl-names = "default";
				hdmi-supply = <0x16>;
				phandle = <0x47>;

				port@0 {
					reg = <0x00>;

					endpoint {
						remote-endpoint = <0x17>;
						phandle = <0x28>;
					};
				};

				port@1 {
					reg = <0x01>;

					endpoint {
						remote-endpoint = <0x18>;
						phandle = <0x40>;
					};
				};
			};

			bus@30000 {
				compatible = "simple-bus";
				reg = <0x00 0x30000 0x00 0x2000>;
				#address-cells = <0x02>;
				#size-cells = <0x02>;
				ranges = <0x00 0x00 0x00 0x30000 0x00 0x2000>;

				rng@218 {
					compatible = "amlogic,meson-rng";
					reg = <0x00 0x218 0x00 0x04>;
					clocks = <0x02 0x1b>;
					clock-names = "core";
				};
			};

			audio-controller@32000 {
				compatible = "amlogic,t9015";
				reg = <0x00 0x32000 0x00 0x14>;
				#sound-dai-cells = <0x00>;
				sound-name-prefix = "ACODEC";
				clocks = <0x02 0x24>;
				clock-names = "pclk";
				resets = <0x05 0x3d>;
				status = "disabled";
			};

			bus@34400 {
				compatible = "simple-bus";
				reg = <0x00 0x34400 0x00 0x400>;
				#address-cells = <0x02>;
				#size-cells = <0x02>;
				ranges = <0x00 0x00 0x00 0x34400 0x00 0x400>;

				pinctrl@40 {
					compatible = "amlogic,meson-g12a-periphs-pinctrl";
					#address-cells = <0x02>;
					#size-cells = <0x02>;
					ranges;
					phandle = <0x19>;

					bank@40 {
						reg = <0x00 0x40 0x00 0x4c 0x00 0xe8 0x00 0x18 0x00 0x120 0x00 0x18 0x00 0x2c0 0x00 0x40 0x00 0x340 0x00 0x1c>;
						reg-names = "gpio\0pull\0pull-enable\0mux\0ds";
						gpio-controller;
						#gpio-cells = <0x02>;
						gpio-ranges = <0x19 0x00 0x00 0x56>;
						gpio-line-names = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0PIN_36\0PIN_26\0PIN_32\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0PIN_27\0PIN_28\0PIN_16\0PIN_18\0PIN_22\0PIN_11\0PIN_13\0PIN_7\0PIN_33\0PIN_15\0PIN_19\0PIN_21\0PIN_24\0PIN_23\0PIN_8\0PIN_10\0PIN_29\0PIN_31\0PIN_12\0PIN_3\0PIN_5\0PIN_35";
						phandle = <0x2b>;

						hog-0 {
							gpio-hog;
							gpios = <0x14 0x00>;
							output-high;
							line-name = "usb-hub-reset";
						};
					};

					cec_ao_a_h {

						mux {
							groups = "cec_ao_a_h";
							function = "cec_ao_a_h";
							bias-disable;
						};
					};

					cec_ao_b_h {

						mux {
							groups = "cec_ao_b_h";
							function = "cec_ao_b_h";
							bias-disable;
						};
					};

					emmc-ctrl {
						phandle = <0x2e>;

						mux-0 {
							groups = "emmc_cmd";
							function = "emmc";
							bias-pull-up;
							drive-strength-microamp = <0xfa0>;
						};

						mux-1 {
							groups = "emmc_clk";
							function = "emmc";
							bias-disable;
							drive-strength-microamp = <0xfa0>;
						};
					};

					emmc-data-4b {

						mux-0 {
							groups = "emmc_nand_d0\0emmc_nand_d1\0emmc_nand_d2\0emmc_nand_d3";
							function = "emmc";
							bias-pull-up;
							drive-strength-microamp = <0xfa0>;
						};
					};

					emmc-data-8b {
						phandle = <0x2f>;

						mux-0 {
							groups = "emmc_nand_d0\0emmc_nand_d1\0emmc_nand_d2\0emmc_nand_d3\0emmc_nand_d4\0emmc_nand_d5\0emmc_nand_d6\0emmc_nand_d7";
							function = "emmc";
							bias-pull-up;
							drive-strength-microamp = <0xfa0>;
						};
					};

					emmc-ds {
						phandle = <0x30>;

						mux {
							groups = "emmc_nand_ds";
							function = "emmc";
							bias-pull-down;
							drive-strength-microamp = <0xfa0>;
						};
					};

					emmc_clk_gate {
						phandle = <0x31>;

						mux {
							groups = "BOOT_8";
							function = "gpio_periphs";
							bias-pull-down;
							drive-strength-microamp = <0xfa0>;
						};
					};

					hdmitx_ddc {
						phandle = <0x15>;

						mux {
							groups = "hdmitx_sda\0hdmitx_sck";
							function = "hdmitx";
							bias-disable;
							drive-strength-microamp = <0xfa0>;
						};
					};

					hdmitx_hpd {
						phandle = <0x14>;

						mux {
							groups = "hdmitx_hpd_in";
							function = "hdmitx";
							bias-disable;
						};
					};

					i2c0-sda-c {

						mux {
							groups = "i2c0_sda_c";
							function = "i2c0";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c0-sck-c {

						mux {
							groups = "i2c0_sck_c";
							function = "i2c0";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c0-sda-z0 {

						mux {
							groups = "i2c0_sda_z0";
							function = "i2c0";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c0-sck-z1 {

						mux {
							groups = "i2c0_sck_z1";
							function = "i2c0";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c0-sda-z7 {

						mux {
							groups = "i2c0_sda_z7";
							function = "i2c0";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c0-sda-z8 {

						mux {
							groups = "i2c0_sda_z8";
							function = "i2c0";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c1-sda-x {

						mux {
							groups = "i2c1_sda_x";
							function = "i2c1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c1-sck-x {

						mux {
							groups = "i2c1_sck_x";
							function = "i2c1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c1-sda-h2 {

						mux {
							groups = "i2c1_sda_h2";
							function = "i2c1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c1-sck-h3 {

						mux {
							groups = "i2c1_sck_h3";
							function = "i2c1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c1-sda-h6 {

						mux {
							groups = "i2c1_sda_h6";
							function = "i2c1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c1-sck-h7 {

						mux {
							groups = "i2c1_sck_h7";
							function = "i2c1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c2-sda-x {

						mux {
							groups = "i2c2_sda_x";
							function = "i2c2";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c2-sck-x {

						mux {
							groups = "i2c2_sck_x";
							function = "i2c2";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c2-sda-z {

						mux {
							groups = "i2c2_sda_z";
							function = "i2c2";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c2-sck-z {

						mux {
							groups = "i2c2_sck_z";
							function = "i2c2";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c3-sda-h {

						mux {
							groups = "i2c3_sda_h";
							function = "i2c3";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c3-sck-h {

						mux {
							groups = "i2c3_sck_h";
							function = "i2c3";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c3-sda-a {

						mux {
							groups = "i2c3_sda_a";
							function = "i2c3";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c3-sck-a {

						mux {
							groups = "i2c3_sck_a";
							function = "i2c3";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					mclk0-a {

						mux {
							groups = "mclk0_a";
							function = "mclk0";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					mclk1-a {

						mux {
							groups = "mclk1_a";
							function = "mclk1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					mclk1-x {

						mux {
							groups = "mclk1_x";
							function = "mclk1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					mclk1-z {

						mux {
							groups = "mclk1_z";
							function = "mclk1";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					nor {

						mux {
							groups = "nor_d\0nor_q\0nor_c\0nor_cs";
							function = "nor";
							bias-disable;
						};
					};

					pdm-din0-a {

						mux {
							groups = "pdm_din0_a";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din0-c {

						mux {
							groups = "pdm_din0_c";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din0-x {

						mux {
							groups = "pdm_din0_x";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din0-z {

						mux {
							groups = "pdm_din0_z";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din1-a {

						mux {
							groups = "pdm_din1_a";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din1-c {

						mux {
							groups = "pdm_din1_c";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din1-x {

						mux {
							groups = "pdm_din1_x";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din1-z {

						mux {
							groups = "pdm_din1_z";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din2-a {

						mux {
							groups = "pdm_din2_a";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din2-c {

						mux {
							groups = "pdm_din2_c";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din2-x {

						mux {
							groups = "pdm_din2_x";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din2-z {

						mux {
							groups = "pdm_din2_z";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din3-a {

						mux {
							groups = "pdm_din3_a";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din3-c {

						mux {
							groups = "pdm_din3_c";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din3-x {

						mux {
							groups = "pdm_din3_x";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-din3-z {

						mux {
							groups = "pdm_din3_z";
							function = "pdm";
							bias-disable;
						};
					};

					pdm-dclk-a {

						mux {
							groups = "pdm_dclk_a";
							function = "pdm";
							bias-disable;
							drive-strength-microamp = <0x1f4>;
						};
					};

					pdm-dclk-c {

						mux {
							groups = "pdm_dclk_c";
							function = "pdm";
							bias-disable;
							drive-strength-microamp = <0x1f4>;
						};
					};

					pdm-dclk-x {

						mux {
							groups = "pdm_dclk_x";
							function = "pdm";
							bias-disable;
							drive-strength-microamp = <0x1f4>;
						};
					};

					pdm-dclk-z {

						mux {
							groups = "pdm_dclk_z";
							function = "pdm";
							bias-disable;
							drive-strength-microamp = <0x1f4>;
						};
					};

					pwm-a {

						mux {
							groups = "pwm_a";
							function = "pwm_a";
							bias-disable;
						};
					};

					pwm-b-x7 {

						mux {
							groups = "pwm_b_x7";
							function = "pwm_b";
							bias-disable;
						};
					};

					pwm-b-x19 {

						mux {
							groups = "pwm_b_x19";
							function = "pwm_b";
							bias-disable;
						};
					};

					pwm-c-c {

						mux {
							groups = "pwm_c_c";
							function = "pwm_c";
							bias-disable;
						};
					};

					pwm-c-x5 {

						mux {
							groups = "pwm_c_x5";
							function = "pwm_c";
							bias-disable;
						};
					};

					pwm-c-x8 {

						mux {
							groups = "pwm_c_x8";
							function = "pwm_c";
							bias-disable;
						};
					};

					pwm-d-x3 {

						mux {
							groups = "pwm_d_x3";
							function = "pwm_d";
							bias-disable;
						};
					};

					pwm-d-x6 {

						mux {
							groups = "pwm_d_x6";
							function = "pwm_d";
							bias-disable;
						};
					};

					pwm-e {

						mux {
							groups = "pwm_e";
							function = "pwm_e";
							bias-disable;
						};
					};

					pwm-f-x {

						mux {
							groups = "pwm_f_x";
							function = "pwm_f";
							bias-disable;
						};
					};

					pwm-f-h {

						mux {
							groups = "pwm_f_h";
							function = "pwm_f";
							bias-disable;
						};
					};

					sdcard_c {
						phandle = <0x29>;

						mux-0 {
							groups = "sdcard_d0_c\0sdcard_d1_c\0sdcard_d2_c\0sdcard_d3_c\0sdcard_cmd_c";
							function = "sdcard";
							bias-pull-up;
							drive-strength-microamp = <0xfa0>;
						};

						mux-1 {
							groups = "sdcard_clk_c";
							function = "sdcard";
							bias-disable;
							drive-strength-microamp = <0xfa0>;
						};
					};

					sdcard_clk_gate_c {
						phandle = <0x2a>;

						mux {
							groups = "GPIOC_4";
							function = "gpio_periphs";
							bias-pull-down;
							drive-strength-microamp = <0xfa0>;
						};
					};

					sdcard_z {

						mux-0 {
							groups = "sdcard_d0_z\0sdcard_d1_z\0sdcard_d2_z\0sdcard_d3_z\0sdcard_cmd_z";
							function = "sdcard";
							bias-pull-up;
							drive-strength-microamp = <0xfa0>;
						};

						mux-1 {
							groups = "sdcard_clk_z";
							function = "sdcard";
							bias-disable;
							drive-strength-microamp = <0xfa0>;
						};
					};

					sdcard_clk_gate_z {

						mux {
							groups = "GPIOZ_6";
							function = "gpio_periphs";
							bias-pull-down;
							drive-strength-microamp = <0xfa0>;
						};
					};

					sdio {

						mux {
							groups = "sdio_d0\0sdio_d1\0sdio_d2\0sdio_d3\0sdio_clk\0sdio_cmd";
							function = "sdio";
							bias-disable;
							drive-strength-microamp = <0xfa0>;
						};
					};

					sdio_clk_gate {

						mux {
							groups = "GPIOX_4";
							function = "gpio_periphs";
							bias-pull-down;
							drive-strength-microamp = <0xfa0>;
						};
					};

					spdif-in-a10 {

						mux {
							groups = "spdif_in_a10";
							function = "spdif_in";
							bias-disable;
						};
					};

					spdif-in-a12 {

						mux {
							groups = "spdif_in_a12";
							function = "spdif_in";
							bias-disable;
						};
					};

					spdif-in-h {

						mux {
							groups = "spdif_in_h";
							function = "spdif_in";
							bias-disable;
						};
					};

					spdif-out-h {

						mux {
							groups = "spdif_out_h";
							function = "spdif_out";
							drive-strength-microamp = <0x1f4>;
							bias-disable;
						};
					};

					spdif-out-a11 {

						mux {
							groups = "spdif_out_a11";
							function = "spdif_out";
							drive-strength-microamp = <0x1f4>;
							bias-disable;
						};
					};

					spdif-out-a13 {

						mux {
							groups = "spdif_out_a13";
							function = "spdif_out";
							drive-strength-microamp = <0x1f4>;
							bias-disable;
						};
					};

					spicc0-x {

						mux {
							groups = "spi0_mosi_x\0spi0_miso_x\0spi0_clk_x";
							function = "spi0";
							drive-strength-microamp = <0xfa0>;
							bias-disable;
						};
					};

					spicc0-ss0-x {

						mux {
							groups = "spi0_ss0_x";
							function = "spi0";
							drive-strength-microamp = <0xfa0>;
							bias-disable;
						};
					};

					spicc0-c {

						mux {
							groups = "spi0_mosi_c\0spi0_miso_c\0spi0_ss0_c\0spi0_clk_c";
							function = "spi0";
							drive-strength-microamp = <0xfa0>;
							bias-disable;
						};
					};

					spicc1 {

						mux {
							groups = "spi1_mosi\0spi1_miso\0spi1_clk";
							function = "spi1";
							drive-strength-microamp = <0xfa0>;
						};
					};

					spicc1-ss0 {

						mux {
							groups = "spi1_ss0";
							function = "spi1";
							drive-strength-microamp = <0xfa0>;
							bias-disable;
						};
					};

					tdm-a-din0 {

						mux {
							groups = "tdm_a_din0";
							function = "tdm_a";
							bias-disable;
						};
					};

					tdm-a-din1 {

						mux {
							groups = "tdm_a_din1";
							function = "tdm_a";
							bias-disable;
						};
					};

					tdm-a-dout0 {

						mux {
							groups = "tdm_a_dout0";
							function = "tdm_a";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-a-dout1 {

						mux {
							groups = "tdm_a_dout1";
							function = "tdm_a";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-a-fs {

						mux {
							groups = "tdm_a_fs";
							function = "tdm_a";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-a-sclk {

						mux {
							groups = "tdm_a_sclk";
							function = "tdm_a";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-a-slv-fs {

						mux {
							groups = "tdm_a_slv_fs";
							function = "tdm_a";
							bias-disable;
						};
					};

					tdm-a-slv-sclk {

						mux {
							groups = "tdm_a_slv_sclk";
							function = "tdm_a";
							bias-disable;
						};
					};

					tdm-b-din0 {

						mux {
							groups = "tdm_b_din0";
							function = "tdm_b";
							bias-disable;
						};
					};

					tdm-b-din1 {

						mux {
							groups = "tdm_b_din1";
							function = "tdm_b";
							bias-disable;
						};
					};

					tdm-b-din2 {

						mux {
							groups = "tdm_b_din2";
							function = "tdm_b";
							bias-disable;
						};
					};

					tdm-b-din3-a {

						mux {
							groups = "tdm_b_din3_a";
							function = "tdm_b";
							bias-disable;
						};
					};

					tdm-b-din3-h {

						mux {
							groups = "tdm_b_din3_h";
							function = "tdm_b";
							bias-disable;
						};
					};

					tdm-b-dout0 {

						mux {
							groups = "tdm_b_dout0";
							function = "tdm_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-b-dout1 {

						mux {
							groups = "tdm_b_dout1";
							function = "tdm_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-b-dout2 {

						mux {
							groups = "tdm_b_dout2";
							function = "tdm_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-b-dout3-a {

						mux {
							groups = "tdm_b_dout3_a";
							function = "tdm_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-b-dout3-h {

						mux {
							groups = "tdm_b_dout3_h";
							function = "tdm_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-b-fs {

						mux {
							groups = "tdm_b_fs";
							function = "tdm_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-b-sclk {

						mux {
							groups = "tdm_b_sclk";
							function = "tdm_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-b-slv-fs {

						mux {
							groups = "tdm_b_slv_fs";
							function = "tdm_b";
							bias-disable;
						};
					};

					tdm-b-slv-sclk {

						mux {
							groups = "tdm_b_slv_sclk";
							function = "tdm_b";
							bias-disable;
						};
					};

					tdm-c-din0-a {

						mux {
							groups = "tdm_c_din0_a";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-din0-z {

						mux {
							groups = "tdm_c_din0_z";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-din1-a {

						mux {
							groups = "tdm_c_din1_a";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-din1-z {

						mux {
							groups = "tdm_c_din1_z";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-din2-a {

						mux {
							groups = "tdm_c_din2_a";
							function = "tdm_c";
							bias-disable;
						};
					};

					eth-leds {

						mux {
							groups = "eth_link_led\0eth_act_led";
							function = "eth";
							bias-disable;
						};
					};

					eth {
						phandle = <0x11>;

						mux {
							groups = "eth_mdio\0eth_mdc\0eth_rgmii_rx_clk\0eth_rx_dv\0eth_rxd0\0eth_rxd1\0eth_txen\0eth_txd0\0eth_txd1";
							function = "eth";
							drive-strength-microamp = <0xfa0>;
							bias-disable;
						};
					};

					eth-rgmii {
						phandle = <0x12>;

						mux {
							groups = "eth_rxd2_rgmii\0eth_rxd3_rgmii\0eth_rgmii_tx_clk\0eth_txd2_rgmii\0eth_txd3_rgmii";
							function = "eth";
							drive-strength-microamp = <0xfa0>;
							bias-disable;
						};
					};

					tdm-c-din2-z {

						mux {
							groups = "tdm_c_din2_z";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-din3-a {

						mux {
							groups = "tdm_c_din3_a";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-din3-z {

						mux {
							groups = "tdm_c_din3_z";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-dout0-a {

						mux {
							groups = "tdm_c_dout0_a";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-dout0-z {

						mux {
							groups = "tdm_c_dout0_z";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-dout1-a {

						mux {
							groups = "tdm_c_dout1_a";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-dout1-z {

						mux {
							groups = "tdm_c_dout1_z";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-dout2-a {

						mux {
							groups = "tdm_c_dout2_a";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-dout2-z {

						mux {
							groups = "tdm_c_dout2_z";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-dout3-a {

						mux {
							groups = "tdm_c_dout3_a";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-dout3-z {

						mux {
							groups = "tdm_c_dout3_z";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-fs-a {

						mux {
							groups = "tdm_c_fs_a";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-fs-z {

						mux {
							groups = "tdm_c_fs_z";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-sclk-a {

						mux {
							groups = "tdm_c_sclk_a";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-sclk-z {

						mux {
							groups = "tdm_c_sclk_z";
							function = "tdm_c";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-c-slv-fs-a {

						mux {
							groups = "tdm_c_slv_fs_a";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-slv-fs-z {

						mux {
							groups = "tdm_c_slv_fs_z";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-slv-sclk-a {

						mux {
							groups = "tdm_c_slv_sclk_a";
							function = "tdm_c";
							bias-disable;
						};
					};

					tdm-c-slv-sclk-z {

						mux {
							groups = "tdm_c_slv_sclk_z";
							function = "tdm_c";
							bias-disable;
						};
					};

					uart-a {

						mux {
							groups = "uart_a_tx\0uart_a_rx";
							function = "uart_a";
							bias-disable;
						};
					};

					uart-a-cts-rts {

						mux {
							groups = "uart_a_cts\0uart_a_rts";
							function = "uart_a";
							bias-disable;
						};
					};

					uart-b {

						mux {
							groups = "uart_b_tx\0uart_b_rx";
							function = "uart_b";
							bias-disable;
						};
					};

					uart-c {

						mux {
							groups = "uart_c_tx\0uart_c_rx";
							function = "uart_c";
							bias-disable;
						};
					};

					uart-c-cts-rts {

						mux {
							groups = "uart_c_cts\0uart_c_rts";
							function = "uart_c";
							bias-disable;
						};
					};
				};
			};

			temperature-sensor@34800 {
				compatible = "amlogic,g12a-cpu-thermal\0amlogic,g12a-thermal";
				reg = <0x00 0x34800 0x00 0x50>;
				interrupts = <0x00 0x23 0x01>;
				clocks = <0x02 0xd4>;
				#thermal-sensor-cells = <0x00>;
				amlogic,ao-secure = <0x1a>;
				phandle = <0x07>;
			};

			temperature-sensor@34c00 {
				compatible = "amlogic,g12a-ddr-thermal\0amlogic,g12a-thermal";
				reg = <0x00 0x34c00 0x00 0x50>;
				interrupts = <0x00 0x24 0x01>;
				clocks = <0x02 0xd4>;
				#thermal-sensor-cells = <0x00>;
				amlogic,ao-secure = <0x1a>;
				phandle = <0x0e>;
			};

			phy@36000 {
				compatible = "amlogic,g12a-usb2-phy";
				reg = <0x00 0x36000 0x00 0x2000>;
				clocks = <0x1b>;
				clock-names = "xtal";
				resets = <0x05 0x30>;
				reset-names = "phy";
				#phy-cells = <0x00>;
				phy-supply = <0x16>;
				phandle = <0x35>;
			};

			bus@38000 {
				compatible = "simple-bus";
				reg = <0x00 0x38000 0x00 0x400>;
				#address-cells = <0x02>;
				#size-cells = <0x02>;
				ranges = <0x00 0x00 0x00 0x38000 0x00 0x400>;

				video-lut@48 {
					compatible = "amlogic,canvas";
					reg = <0x00 0x48 0x00 0x14>;
					phandle = <0x27>;
				};
			};

			phy@3a000 {
				compatible = "amlogic,g12a-usb2-phy";
				reg = <0x00 0x3a000 0x00 0x2000>;
				clocks = <0x1b>;
				clock-names = "xtal";
				resets = <0x05 0x31>;
				reset-names = "phy";
				#phy-cells = <0x00>;
				phy-supply = <0x1c>;
				phandle = <0x36>;
			};

			bus@3c000 {
				compatible = "simple-bus";
				reg = <0x00 0x3c000 0x00 0x1400>;
				#address-cells = <0x02>;
				#size-cells = <0x02>;
				ranges = <0x00 0x00 0x00 0x3c000 0x00 0x1400>;

				system-controller@0 {
					compatible = "amlogic,meson-gx-hhi-sysctrl\0simple-mfd\0syscon";
					reg = <0x00 0x00 0x00 0x400>;

					clock-controller {
						compatible = "amlogic,sm1-clkc";
						#clock-cells = <0x01>;
						clocks = <0x1b>;
						clock-names = "xtal";
						phandle = <0x02>;
					};

					power-controller {
						compatible = "amlogic,meson-sm1-pwrc";
						#power-domain-cells = <0x01>;
						amlogic,ao-sysctrl = <0x1d>;
						resets = <0x05 0x05 0x05 0x0a 0x05 0x0d 0x05 0x25 0x05 0x85 0x05 0x86 0x05 0x87 0x05 0x89 0x05 0x8c 0x05 0x8d 0x05 0xe7>;
						reset-names = "viu\0venc\0vcbus\0bt656\0rdma\0venci\0vencp\0vdac\0vdi6\0vencl\0vid_lock";
						clocks = <0x02 0x74 0x02 0x7c>;
						clock-names = "vpu\0vapb";
						assigned-clocks = <0x02 0x6e 0x02 0x70 0x02 0x74 0x02 0x75 0x02 0x77 0x02 0x7b>;
						assigned-clock-parents = <0x02 0x03 0x00 0x02 0x70 0x02 0x04 0x00 0x02 0x77>;
						assigned-clock-rates = <0x00 0x27bc86aa 0x00 0x00 0xee6b280 0x00>;
						phandle = <0x03>;
					};
				};
			};

			phy@46000 {
				compatible = "amlogic,g12a-usb3-pcie-phy";
				reg = <0x00 0x46000 0x00 0x2000>;
				clocks = <0x02 0xc9>;
				clock-names = "ref_clk";
				resets = <0x05 0x0e>;
				reset-names = "phy";
				assigned-clocks = <0x02 0xc9>;
				assigned-clock-rates = <0x5f5e100>;
				#phy-cells = <0x01>;
				phandle = <0x06>;
			};

			mdio-multiplexer@4c000 {
				compatible = "amlogic,g12a-mdio-mux";
				reg = <0x00 0x4c000 0x00 0xa4>;
				clocks = <0x02 0x13 0x1b 0x02 0xb1>;
				clock-names = "pclk\0clkin0\0clkin1";
				mdio-parent-bus = <0x1e>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;

				mdio@0 {
					reg = <0x00>;
					#address-cells = <0x01>;
					#size-cells = <0x00>;

					ethernet-phy@0 {
						reg = <0x00>;
						max-speed = <0x3e8>;
						interrupt-parent = <0x1f>;
						interrupts = <0x1a 0x08>;
						phandle = <0x13>;
					};
				};

				mdio@1 {
					reg = <0x01>;
					#address-cells = <0x01>;
					#size-cells = <0x00>;

					ethernet_phy@8 {
						compatible = "ethernet-phy-id0180.3301\0ethernet-phy-ieee802.3-c22";
						interrupts = <0x00 0x09 0x04>;
						reg = <0x08>;
						max-speed = <0x64>;
					};
				};
			};

			bus@60000 {
				compatible = "simple-bus";
				reg = <0x00 0x60000 0x00 0x1000>;
				#address-cells = <0x02>;
				#size-cells = <0x02>;
				ranges = <0x00 0x00 0x00 0x60000 0x00 0x1000>;

				clock-controller@0 {
					status = "okay";
					compatible = "amlogic,sm1-audio-clkc";
					reg = <0x00 0x00 0x00 0xb4>;
					#clock-cells = <0x01>;
					#reset-cells = <0x01>;
					clocks = <0x02 0x25 0x02 0x0b 0x02 0x0c 0x02 0x0d 0x02 0x0e 0x02 0x4a 0x02 0x03 0x02 0x04 0x02 0x05>;
					clock-names = "pclk\0mst_in0\0mst_in1\0mst_in2\0mst_in3\0mst_in4\0mst_in5\0mst_in6\0mst_in7";
					resets = <0x05 0x41>;
					phandle = <0x20>;
				};

				audio-controller@100 {
					compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
					reg = <0x00 0x100 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "TODDR_A";
					interrupts = <0x00 0x94 0x01>;
					clocks = <0x20 0x29>;
					resets = <0x21 0x00 0x20 0x06>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x2000>;
					status = "disabled";
				};

				audio-controller@140 {
					compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
					reg = <0x00 0x140 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "TODDR_B";
					interrupts = <0x00 0x95 0x01>;
					clocks = <0x20 0x2a>;
					resets = <0x21 0x01 0x20 0x07>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x100>;
					status = "disabled";
				};

				audio-controller@180 {
					compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
					reg = <0x00 0x180 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "TODDR_C";
					interrupts = <0x00 0x96 0x01>;
					clocks = <0x20 0x2b>;
					resets = <0x21 0x02 0x20 0x08>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x100>;
					status = "disabled";
				};

				audio-controller@1c0 {
					compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
					reg = <0x00 0x1c0 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "FRDDR_A";
					interrupts = <0x00 0x98 0x01>;
					clocks = <0x20 0x26>;
					resets = <0x21 0x03 0x20 0x09>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x200>;
					status = "okay";
					phandle = <0x42>;
				};

				audio-controller@200 {
					compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
					reg = <0x00 0x200 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "FRDDR_B";
					interrupts = <0x00 0x99 0x01>;
					clocks = <0x20 0x27>;
					resets = <0x21 0x04 0x20 0x0a>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x100>;
					status = "okay";
					phandle = <0x43>;
				};

				audio-controller@240 {
					compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
					reg = <0x00 0x240 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "FRDDR_C";
					interrupts = <0x00 0x9a 0x01>;
					clocks = <0x20 0x28>;
					resets = <0x21 0x05 0x20 0x0b>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x100>;
					status = "okay";
					phandle = <0x44>;
				};

				reset-controller@280 {
					status = "okay";
					compatible = "amlogic,meson-sm1-audio-arb";
					reg = <0x00 0x280 0x00 0x04>;
					#reset-cells = <0x01>;
					clocks = <0x20 0x1d>;
					phandle = <0x21>;
				};

				audio-controller@300 {
					compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
					reg = <0x00 0x300 0x00 0x40>;
					sound-name-prefix = "TDMIN_A";
					resets = <0x20 0x01>;
					clocks = <0x20 0x1f 0x20 0x7b 0x20 0x74 0x20 0x82 0x20 0x82>;
					clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
					status = "disabled";
				};

				audio-controller@340 {
					compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
					reg = <0x00 0x340 0x00 0x40>;
					sound-name-prefix = "TDMIN_B";
					resets = <0x20 0x02>;
					clocks = <0x20 0x20 0x20 0x7c 0x20 0x75 0x20 0x83 0x20 0x83>;
					clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
					status = "disabled";
				};

				audio-controller@380 {
					compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
					reg = <0x00 0x380 0x00 0x40>;
					sound-name-prefix = "TDMIN_C";
					resets = <0x20 0x03>;
					clocks = <0x20 0x21 0x20 0x7d 0x20 0x76 0x20 0x84 0x20 0x84>;
					clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
					status = "disabled";
				};

				audio-controller@3c0 {
					compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
					reg = <0x00 0x3c0 0x00 0x40>;
					sound-name-prefix = "TDMIN_LB";
					resets = <0x20 0x04>;
					clocks = <0x20 0x22 0x20 0x7e 0x20 0x77 0x20 0x85 0x20 0x85>;
					clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
					status = "disabled";
				};

				audio-controller@500 {
					compatible = "amlogic,sm1-tdmout";
					reg = <0x00 0x500 0x00 0x40>;
					sound-name-prefix = "TDMOUT_A";
					resets = <0x20 0x0c>;
					clocks = <0x20 0x23 0x20 0x7f 0x20 0x78 0x20 0x86 0x20 0x86>;
					clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
					status = "disabled";
				};

				audio-controller@540 {
					compatible = "amlogic,sm1-tdmout";
					reg = <0x00 0x540 0x00 0x40>;
					sound-name-prefix = "TDMOUT_B";
					resets = <0x20 0x0d>;
					clocks = <0x20 0x24 0x20 0x80 0x20 0x79 0x20 0x87 0x20 0x87>;
					clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
					status = "okay";
					phandle = <0x41>;
				};

				audio-controller@580 {
					compatible = "amlogic,sm1-tdmout";
					reg = <0x00 0x580 0x00 0x40>;
					sound-name-prefix = "TDMOUT_C";
					resets = <0x20 0x0e>;
					clocks = <0x20 0x25 0x20 0x81 0x20 0x7a 0x20 0x88 0x20 0x88>;
					clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
					status = "disabled";
				};

				audio-controller@744 {
					compatible = "amlogic,sm1-tohdmitx\0amlogic,g12a-tohdmitx";
					reg = <0x00 0x744 0x00 0x04>;
					#sound-dai-cells = <0x01>;
					sound-name-prefix = "TOHDMITX";
					resets = <0x20 0x18>;
					status = "okay";
					phandle = <0x46>;
				};

				audio-controller@840 {
					compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
					reg = <0x00 0x840 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "TODDR_D";
					interrupts = <0x00 0x31 0x01>;
					clocks = <0x20 0xab>;
					resets = <0x21 0x06 0x20 0x21>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x100>;
					status = "disabled";
				};

				audio-controller@880 {
					compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
					reg = <0x00 0x880 0x00 0x2c>;
					#sound-dai-cells = <0x00>;
					sound-name-prefix = "FRDDR_D";
					interrupts = <0x00 0x32 0x01>;
					clocks = <0x20 0xaa>;
					resets = <0x21 0x07 0x20 0x20>;
					reset-names = "arb\0rst";
					amlogic,fifo-depth = <0x100>;
					status = "disabled";
				};
			};

			audio-controller@61000 {
				compatible = "amlogic,sm1-pdm\0amlogic,axg-pdm";
				reg = <0x00 0x61000 0x00 0x34>;
				#sound-dai-cells = <0x00>;
				sound-name-prefix = "PDM";
				clocks = <0x20 0x1e 0x20 0x39 0x20 0x3a>;
				clock-names = "pclk\0dclk\0sysclk";
				resets = <0x20 0x00>;
				status = "disabled";
			};
		};

		bus@ff800000 {
			compatible = "simple-bus";
			reg = <0x00 0xff800000 0x00 0x100000>;
			#address-cells = <0x02>;
			#size-cells = <0x02>;
			ranges = <0x00 0x00 0x00 0xff800000 0x00 0x100000>;

			sys-ctrl@0 {
				compatible = "amlogic,meson-gx-ao-sysctrl\0simple-mfd\0syscon";
				reg = <0x00 0x00 0x00 0x100>;
				#address-cells = <0x02>;
				#size-cells = <0x02>;
				ranges = <0x00 0x00 0x00 0x00 0x00 0x100>;
				phandle = <0x1d>;

				clock-controller {
					compatible = "amlogic,meson-g12a-aoclkc";
					#clock-cells = <0x01>;
					#reset-cells = <0x01>;
					clocks = <0x1b 0x02 0x0a>;
					clock-names = "xtal\0mpeg-clk";
					phandle = <0x23>;
				};

				pinctrl@14 {
					compatible = "amlogic,meson-g12a-aobus-pinctrl";
					#address-cells = <0x02>;
					#size-cells = <0x02>;
					ranges;
					phandle = <0x22>;

					bank@14 {
						reg = <0x00 0x14 0x00 0x08 0x00 0x1c 0x00 0x08 0x00 0x24 0x00 0x14>;
						reg-names = "mux\0ds\0gpio";
						gpio-controller;
						#gpio-cells = <0x02>;
						gpio-ranges = <0x22 0x00 0x00 0x0f>;
						gpio-line-names = "\0\0\0\0PIN_47\0\0\0PIN_45\0PIN_46\0PIN_44\0PIN_42\0\0\0\0";
						phandle = <0x3c>;
					};

					i2c_ao_sck_pins {

						mux {
							groups = "i2c_ao_sck";
							function = "i2c_ao";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c_ao_sda {

						mux {
							groups = "i2c_ao_sda";
							function = "i2c_ao";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c_ao_sck_e {

						mux {
							groups = "i2c_ao_sck_e";
							function = "i2c_ao";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					i2c_ao_sda_e {

						mux {
							groups = "i2c_ao_sda_e";
							function = "i2c_ao";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					mclk0-ao {

						mux {
							groups = "mclk0_ao";
							function = "mclk0_ao";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-ao-b-din0 {

						mux {
							groups = "tdm_ao_b_din0";
							function = "tdm_ao_b";
							bias-disable;
						};
					};

					spdif-ao-out {

						mux {
							groups = "spdif_ao_out";
							function = "spdif_ao_out";
							drive-strength-microamp = <0x1f4>;
							bias-disable;
						};
					};

					tdm-ao-b-din1 {

						mux {
							groups = "tdm_ao_b_din1";
							function = "tdm_ao_b";
							bias-disable;
						};
					};

					tdm-ao-b-din2 {

						mux {
							groups = "tdm_ao_b_din2";
							function = "tdm_ao_b";
							bias-disable;
						};
					};

					tdm-ao-b-dout0 {

						mux {
							groups = "tdm_ao_b_dout0";
							function = "tdm_ao_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-ao-b-dout1 {

						mux {
							groups = "tdm_ao_b_dout1";
							function = "tdm_ao_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-ao-b-dout2 {

						mux {
							groups = "tdm_ao_b_dout2";
							function = "tdm_ao_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-ao-b-fs {

						mux {
							groups = "tdm_ao_b_fs";
							function = "tdm_ao_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-ao-b-sclk {

						mux {
							groups = "tdm_ao_b_sclk";
							function = "tdm_ao_b";
							bias-disable;
							drive-strength-microamp = <0xbb8>;
						};
					};

					tdm-ao-b-slv-fs {

						mux {
							groups = "tdm_ao_b_slv_fs";
							function = "tdm_ao_b";
							bias-disable;
						};
					};

					tdm-ao-b-slv-sclk {

						mux {
							groups = "tdm_ao_b_slv_sclk";
							function = "tdm_ao_b";
							bias-disable;
						};
					};

					uart-a-ao {
						phandle = <0x25>;

						mux {
							groups = "uart_ao_a_tx\0uart_ao_a_rx";
							function = "uart_ao_a";
							bias-disable;
						};
					};

					uart-ao-a-cts-rts {

						mux {
							groups = "uart_ao_a_cts\0uart_ao_a_rts";
							function = "uart_ao_a";
							bias-disable;
						};
					};

					pwm-a-e {

						mux {
							groups = "pwm_a_e";
							function = "pwm_a_e";
							bias-disable;
						};
					};

					pwm-ao-a {

						mux {
							groups = "pwm_ao_a";
							function = "pwm_ao_a";
							bias-disable;
						};
					};

					pwm-ao-b {

						mux {
							groups = "pwm_ao_b";
							function = "pwm_ao_b";
							bias-disable;
						};
					};

					pwm-ao-c-4 {

						mux {
							groups = "pwm_ao_c_4";
							function = "pwm_ao_c";
							bias-disable;
						};
					};

					pwm-ao-c-6 {

						mux {
							groups = "pwm_ao_c_6";
							function = "pwm_ao_c";
							bias-disable;
						};
					};

					pwm-ao-d-5 {

						mux {
							groups = "pwm_ao_d_5";
							function = "pwm_ao_d";
							bias-disable;
						};
					};

					pwm-ao-d-10 {

						mux {
							groups = "pwm_ao_d_10";
							function = "pwm_ao_d";
							bias-disable;
						};
					};

					pwm-ao-d-e {
						phandle = <0x24>;

						mux {
							groups = "pwm_ao_d_e";
							function = "pwm_ao_d";
						};
					};

					remote-input-ao {
						phandle = <0x26>;

						mux {
							groups = "remote_ao_input";
							function = "remote_ao_input";
							bias-disable;
						};
					};
				};
			};

			rtc@a8 {
				compatible = "amlogic,meson-vrtc";
				reg = <0x00 0xa8 0x00 0x04>;
			};

			cec@100 {
				compatible = "amlogic,meson-gx-ao-cec";
				reg = <0x00 0x100 0x00 0x14>;
				interrupts = <0x00 0xc7 0x01>;
				clocks = <0x23 0x1b>;
				clock-names = "core";
				status = "disabled";
			};

			ao-secure@140 {
				compatible = "amlogic,meson-gx-ao-secure\0syscon";
				reg = <0x00 0x140 0x00 0x140>;
				amlogic,has-chip-id;
				phandle = <0x1a>;
			};

			cec@280 {
				compatible = "amlogic,meson-sm1-ao-cec";
				reg = <0x00 0x280 0x00 0x1c>;
				interrupts = <0x00 0xcb 0x01>;
				clocks = <0x23 0x13>;
				clock-names = "oscin";
				status = "disabled";
			};

			pwm@2000 {
				compatible = "amlogic,meson-g12a-ao-pwm-cd";
				reg = <0x00 0x2000 0x00 0x20>;
				#pwm-cells = <0x03>;
				status = "okay";
				pinctrl-0 = <0x24>;
				pinctrl-names = "default";
				clocks = <0x1b>;
				clock-names = "clkin1";
				phandle = <0x3f>;
			};

			serial@3000 {
				compatible = "amlogic,meson-gx-uart\0amlogic,meson-ao-uart";
				reg = <0x00 0x3000 0x00 0x18>;
				interrupts = <0x00 0xc1 0x01>;
				clocks = <0x1b 0x23 0x04 0x1b>;
				clock-names = "xtal\0pclk\0baud";
				status = "okay";
				pinctrl-0 = <0x25>;
				pinctrl-names = "default";
			};

			serial@4000 {
				compatible = "amlogic,meson-gx-uart\0amlogic,meson-ao-uart";
				reg = <0x00 0x4000 0x00 0x18>;
				interrupts = <0x00 0xc5 0x01>;
				clocks = <0x1b 0x23 0x06 0x1b>;
				clock-names = "xtal\0pclk\0baud";
				status = "disabled";
			};

			i2c@5000 {
				compatible = "amlogic,meson-axg-i2c";
				status = "disabled";
				reg = <0x00 0x5000 0x00 0x20>;
				interrupts = <0x00 0xc3 0x01>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				clocks = <0x02 0x18>;
			};

			pwm@7000 {
				compatible = "amlogic,meson-g12a-ao-pwm-ab";
				reg = <0x00 0x7000 0x00 0x20>;
				#pwm-cells = <0x03>;
				status = "disabled";
			};

			ir@8000 {
				compatible = "amlogic,meson-gxbb-ir";
				reg = <0x00 0x8000 0x00 0x20>;
				interrupts = <0x00 0xc4 0x01>;
				status = "okay";
				pinctrl-0 = <0x26>;
				pinctrl-names = "default";
				linux,rc-map-name = "rc-odroid";
			};

			adc@9000 {
				compatible = "amlogic,meson-g12a-saradc\0amlogic,meson-saradc";
				reg = <0x00 0x9000 0x00 0x48>;
				#io-channel-cells = <0x01>;
				interrupts = <0x00 0xc8 0x01>;
				clocks = <0x1b 0x23 0x08 0x23 0x12 0x23 0x10>;
				clock-names = "clkin\0core\0adc_clk\0adc_sel";
				status = "okay";
			};
		};

		video-decoder@ff620000 {
			compatible = "amlogic,sm1-vdec";
			reg = <0x00 0xff620000 0x00 0x10000 0x00 0xffd0e180 0x00 0xe4>;
			reg-names = "dos\0esparser";
			interrupts = <0x00 0x2c 0x01 0x00 0x20 0x01>;
			interrupt-names = "vdec\0esparser";
			amlogic,ao-sysctrl = <0x1d>;
			amlogic,canvas = <0x27>;
			clocks = <0x02 0x2e 0x02 0x10 0x02 0xcc 0x02 0xcf 0x02 0xd2>;
			clock-names = "dos_parser\0dos\0vdec_1\0vdec_hevc\0vdec_hevcf";
			resets = <0x05 0x28>;
			reset-names = "esparser";
		};

		vpu@ff900000 {
			compatible = "amlogic,meson-g12a-vpu";
			reg = <0x00 0xff900000 0x00 0x100000 0x00 0xff63c000 0x00 0x1000>;
			reg-names = "vpu\0hhi";
			interrupts = <0x00 0x03 0x01>;
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			amlogic,canvas = <0x27>;
			power-domains = <0x03 0x00>;

			port@0 {
				reg = <0x00>;
			};

			port@1 {
				reg = <0x01>;

				endpoint {
					remote-endpoint = <0x28>;
					phandle = <0x17>;
				};
			};
		};

		interrupt-controller@ffc01000 {
			compatible = "arm,gic-400";
			reg = <0x00 0xffc01000 0x00 0x1000 0x00 0xffc02000 0x00 0x2000 0x00 0xffc04000 0x00 0x2000 0x00 0xffc06000 0x00 0x2000>;
			interrupt-controller;
			interrupts = <0x01 0x09 0xff04>;
			#interrupt-cells = <0x03>;
			#address-cells = <0x00>;
			phandle = <0x01>;
		};

		bus@ffd00000 {
			compatible = "simple-bus";
			reg = <0x00 0xffd00000 0x00 0x100000>;
			#address-cells = <0x02>;
			#size-cells = <0x02>;
			ranges = <0x00 0x00 0x00 0xffd00000 0x00 0x100000>;

			reset-controller@1004 {
				compatible = "amlogic,meson-axg-reset";
				reg = <0x00 0x1004 0x00 0x9c>;
				#reset-cells = <0x01>;
				phandle = <0x05>;
			};

			interrupt-controller@f080 {
				compatible = "amlogic,meson-sm1-gpio-intc\0amlogic,meson-gpio-intc";
				reg = <0x00 0xf080 0x00 0x10>;
				interrupt-controller;
				#interrupt-cells = <0x02>;
				amlogic,channel-interrupts = <0x40 0x41 0x42 0x43 0x44 0x45 0x46 0x47>;
				phandle = <0x1f>;
			};

			watchdog@f0d0 {
				compatible = "amlogic,meson-gxbb-wdt";
				reg = <0x00 0xf0d0 0x00 0x10>;
				clocks = <0x1b>;
			};

			spi@13000 {
				compatible = "amlogic,meson-g12a-spicc";
				reg = <0x00 0x13000 0x00 0x44>;
				interrupts = <0x00 0x51 0x04>;
				clocks = <0x02 0x17 0x02 0x102>;
				clock-names = "core\0pclk";
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				status = "disabled";
			};

			spi@15000 {
				compatible = "amlogic,meson-g12a-spicc";
				reg = <0x00 0x15000 0x00 0x44>;
				interrupts = <0x00 0x5a 0x04>;
				clocks = <0x02 0x1d 0x02 0x105>;
				clock-names = "core\0pclk";
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				status = "disabled";
			};

			spi@14000 {
				compatible = "amlogic,meson-gxbb-spifc";
				status = "disabled";
				reg = <0x00 0x14000 0x00 0x80>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				clocks = <0x02 0x0a>;
			};

			pwm@19000 {
				compatible = "amlogic,meson-g12a-ee-pwm";
				reg = <0x00 0x19000 0x00 0x20>;
				#pwm-cells = <0x03>;
				status = "disabled";
			};

			pwm@1a000 {
				compatible = "amlogic,meson-g12a-ee-pwm";
				reg = <0x00 0x1a000 0x00 0x20>;
				#pwm-cells = <0x03>;
				status = "disabled";
			};

			pwm@1b000 {
				compatible = "amlogic,meson-g12a-ee-pwm";
				reg = <0x00 0x1b000 0x00 0x20>;
				#pwm-cells = <0x03>;
				status = "disabled";
			};

			i2c@1c000 {
				compatible = "amlogic,meson-axg-i2c";
				status = "disabled";
				reg = <0x00 0x1c000 0x00 0x20>;
				interrupts = <0x00 0x27 0x01>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				clocks = <0x02 0x18>;
			};

			i2c@1d000 {
				compatible = "amlogic,meson-axg-i2c";
				status = "disabled";
				reg = <0x00 0x1d000 0x00 0x20>;
				interrupts = <0x00 0xd7 0x01>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				clocks = <0x02 0x18>;
			};

			i2c@1e000 {
				compatible = "amlogic,meson-axg-i2c";
				status = "disabled";
				reg = <0x00 0x1e000 0x00 0x20>;
				interrupts = <0x00 0xd6 0x01>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				clocks = <0x02 0x18>;
			};

			i2c@1f000 {
				compatible = "amlogic,meson-axg-i2c";
				status = "disabled";
				reg = <0x00 0x1f000 0x00 0x20>;
				interrupts = <0x00 0x15 0x01>;
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				clocks = <0x02 0x18>;
			};

			clock-measure@18000 {
				compatible = "amlogic,meson-sm1-clk-measure";
				reg = <0x00 0x18000 0x00 0x10>;
			};

			serial@22000 {
				compatible = "amlogic,meson-gx-uart";
				reg = <0x00 0x22000 0x00 0x18>;
				interrupts = <0x00 0x5d 0x01>;
				clocks = <0x1b 0x02 0x39 0x1b>;
				clock-names = "xtal\0pclk\0baud";
				status = "disabled";
			};

			serial@23000 {
				compatible = "amlogic,meson-gx-uart";
				reg = <0x00 0x23000 0x00 0x18>;
				interrupts = <0x00 0x4b 0x01>;
				clocks = <0x1b 0x02 0x2a 0x1b>;
				clock-names = "xtal\0pclk\0baud";
				status = "disabled";
			};

			serial@24000 {
				compatible = "amlogic,meson-gx-uart";
				reg = <0x00 0x24000 0x00 0x18>;
				interrupts = <0x00 0x1a 0x01>;
				clocks = <0x1b 0x02 0x1c 0x1b>;
				clock-names = "xtal\0pclk\0baud";
				status = "disabled";
			};
		};

		sd@ffe03000 {
			compatible = "amlogic,meson-axg-mmc";
			reg = <0x00 0xffe03000 0x00 0x800>;
			interrupts = <0x00 0xbd 0x01>;
			status = "disabled";
			clocks = <0x02 0x21 0x02 0x3c 0x02 0x02>;
			clock-names = "core\0clkin0\0clkin1";
			resets = <0x05 0x2c>;
		};

		sd@ffe05000 {
			compatible = "amlogic,meson-axg-mmc";
			reg = <0x00 0xffe05000 0x00 0x800>;
			interrupts = <0x00 0xbe 0x01>;
			status = "okay";
			clocks = <0x02 0x22 0x02 0x3d 0x02 0x02>;
			clock-names = "core\0clkin0\0clkin1";
			resets = <0x05 0x2d>;
			pinctrl-0 = <0x29>;
			pinctrl-1 = <0x2a>;
			pinctrl-names = "default\0clk-gate";
			bus-width = <0x04>;
			cap-sd-highspeed;
			max-frequency = <0xbebc200>;
			sd-uhs-sdr12;
			sd-uhs-sdr25;
			sd-uhs-sdr50;
			sd-uhs-sdr104;
			disable-wp;
			cd-gpios = <0x2b 0x2f 0x01>;
			vmmc-supply = <0x2c>;
			vqmmc-supply = <0x2d>;
		};

		mmc@ffe07000 {
			compatible = "amlogic,meson-axg-mmc";
			reg = <0x00 0xffe07000 0x00 0x800>;
			interrupts = <0x00 0xbf 0x01>;
			status = "okay";
			clocks = <0x02 0x23 0x02 0x3e 0x02 0x02>;
			clock-names = "core\0clkin0\0clkin1";
			resets = <0x05 0x2e>;
			pinctrl-0 = <0x2e 0x2f 0x30>;
			pinctrl-1 = <0x31>;
			pinctrl-names = "default\0clk-gate";
			bus-width = <0x08>;
			cap-mmc-highspeed;
			mmc-ddr-1_8v;
			mmc-hs200-1_8v;
			max-frequency = <0xbebc200>;
			disable-wp;
			mmc-pwrseq = <0x32>;
			vmmc-supply = <0x33>;
			vqmmc-supply = <0x34>;
		};

		usb@ffe09000 {
			status = "okay";
			compatible = "amlogic,meson-g12a-usb-ctrl";
			reg = <0x00 0xffe09000 0x00 0xa0>;
			interrupts = <0x00 0x10 0x04>;
			#address-cells = <0x02>;
			#size-cells = <0x02>;
			ranges;
			clocks = <0x02 0x2f>;
			resets = <0x05 0x22>;
			dr_mode = "otg";
			phys = <0x35 0x36 0x06 0x04>;
			phy-names = "usb2-phy0\0usb2-phy1\0usb3-phy0";
			power-domains = <0x03 0x02>;
			vbus-supply = <0x37>;

			usb@ff400000 {
				compatible = "amlogic,meson-g12a-usb\0snps,dwc2";
				reg = <0x00 0xff400000 0x00 0x40000>;
				interrupts = <0x00 0x1f 0x04>;
				clocks = <0x02 0x37>;
				clock-names = "otg";
				phys = <0x36>;
				phy-names = "usb2-phy";
				dr_mode = "peripheral";
				g-rx-fifo-size = <0xc0>;
				g-np-tx-fifo-size = <0x80>;
				g-tx-fifo-size = <0x80 0x80 0x10 0x10 0x10>;
			};

			usb@ff500000 {
				compatible = "snps,dwc3";
				reg = <0x00 0xff500000 0x00 0x100000>;
				interrupts = <0x00 0x1e 0x04>;
				dr_mode = "host";
				snps,dis_u2_susphy_quirk;
				snps,quirk-frame-length-adjustment = <0x20>;
				snps,parkmode-disable-ss-quirk;
			};
		};

		gpu@ffe40000 {
			compatible = "amlogic,meson-g12a-mali\0arm,mali-bifrost";
			reg = <0x00 0xffe40000 0x00 0x40000>;
			interrupt-parent = <0x01>;
			interrupts = <0x00 0xa2 0x04 0x00 0xa1 0x04 0x00 0xa0 0x04>;
			interrupt-names = "job\0mmu\0gpu";
			clocks = <0x02 0xaf>;
			resets = <0x05 0x14 0x05 0x4e>;
			operating-points-v2 = <0x38>;
			#cooling-cells = <0x02>;
			phandle = <0x10>;
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <0x01 0x0d 0xff08 0x01 0x0e 0xff08 0x01 0x0b 0xff08 0x01 0x0a 0xff08>;
		arm,no-tick-in-suspend;
	};

	xtal-clk {
		compatible = "fixed-clock";
		clock-frequency = <0x16e3600>;
		clock-output-names = "xtal";
		#clock-cells = <0x00>;
		phandle = <0x1b>;
	};

	audio-controller-0 {
		compatible = "amlogic,axg-tdm-iface";
		#sound-dai-cells = <0x00>;
		sound-name-prefix = "TDM_A";
		clocks = <0x20 0x31 0x20 0x4f 0x20 0x56>;
		clock-names = "mclk\0sclk\0lrclk";
		status = "disabled";
	};

	audio-controller-1 {
		compatible = "amlogic,axg-tdm-iface";
		#sound-dai-cells = <0x00>;
		sound-name-prefix = "TDM_B";
		clocks = <0x20 0x32 0x20 0x50 0x20 0x57>;
		clock-names = "mclk\0sclk\0lrclk";
		status = "okay";
		phandle = <0x45>;
	};

	audio-controller-2 {
		compatible = "amlogic,axg-tdm-iface";
		#sound-dai-cells = <0x00>;
		sound-name-prefix = "TDM_C";
		clocks = <0x20 0x33 0x20 0x51 0x20 0x58>;
		clock-names = "mclk\0sclk\0lrclk";
		status = "disabled";
	};

	cpus {
		#address-cells = <0x02>;
		#size-cells = <0x00>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x00 0x00>;
			enable-method = "psci";
			next-level-cache = <0x39>;
			#cooling-cells = <0x02>;
			cpu-supply = <0x3a>;
			operating-points-v2 = <0x3b>;
			clocks = <0x02 0xbb>;
			clock-latency = <0xc350>;
			phandle = <0x09>;
		};

		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x00 0x01>;
			enable-method = "psci";
			next-level-cache = <0x39>;
			#cooling-cells = <0x02>;
			cpu-supply = <0x3a>;
			operating-points-v2 = <0x3b>;
			clocks = <0x02 0xfd>;
			clock-latency = <0xc350>;
			phandle = <0x0a>;
		};

		cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x00 0x02>;
			enable-method = "psci";
			next-level-cache = <0x39>;
			#cooling-cells = <0x02>;
			cpu-supply = <0x3a>;
			operating-points-v2 = <0x3b>;
			clocks = <0x02 0xfe>;
			clock-latency = <0xc350>;
			phandle = <0x0b>;
		};

		cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x00 0x03>;
			enable-method = "psci";
			next-level-cache = <0x39>;
			#cooling-cells = <0x02>;
			cpu-supply = <0x3a>;
			operating-points-v2 = <0x3b>;
			clocks = <0x02 0xff>;
			clock-latency = <0xc350>;
			phandle = <0x0c>;
		};

		l2-cache0 {
			compatible = "cache";
			phandle = <0x39>;
		};
	};

	opp-table {
		compatible = "operating-points-v2";
		opp-shared;
		phandle = <0x3b>;

		opp-100000000 {
			opp-hz = <0x00 0x5f5e100>;
			opp-microvolt = <0xb2390>;
		};

		opp-250000000 {
			opp-hz = <0x00 0xee6b280>;
			opp-microvolt = <0xb2390>;
		};

		opp-500000000 {
			opp-hz = <0x00 0x1dcd6500>;
			opp-microvolt = <0xb2390>;
		};

		opp-667000000 {
			opp-hz = <0x00 0x27bc86aa>;
			opp-microvolt = <0xb71b0>;
		};

		opp-1000000000 {
			opp-hz = <0x00 0x3b9aca00>;
			opp-microvolt = <0xbbfd0>;
		};

		opp-1200000000 {
			opp-hz = <0x00 0x47868c00>;
			opp-microvolt = <0xbe6e0>;
		};

		opp-1404000000 {
			opp-hz = <0x00 0x53af5700>;
			opp-microvolt = <0xc0df0>;
		};

		opp-1500000000 {
			opp-hz = <0x00 0x59682f00>;
			opp-microvolt = <0xc3500>;
		};

		opp-1608000000 {
			opp-hz = <0x00 0x5fd82200>;
			opp-microvolt = <0xc5c10>;
		};

		opp-1704000000 {
			opp-hz = <0x00 0x6590fa00>;
			opp-microvolt = <0xcf850>;
		};

		opp-1800000000 {
			opp-hz = <0x00 0x6b49d200>;
			opp-microvolt = <0xdbba0>;
		};

		opp-1908000000 {
			opp-hz = <0x00 0x71b9c500>;
			opp-microvolt = <0xe7ef0>;
		};
	};

	memory@0 {
		device_type = "memory";
		reg = <0x00 0x00 0x00 0x40000000>;
	};

	emmc-pwrseq {
		compatible = "mmc-pwrseq-emmc";
		reset-gpios = <0x2b 0x25 0x01>;
		phandle = <0x32>;
	};

	regulator-tflash_vdd {
		compatible = "regulator-fixed";
		regulator-name = "TFLASH_VDD";
		regulator-min-microvolt = <0x325aa0>;
		regulator-max-microvolt = <0x325aa0>;
		gpio = <0x3c 0x03 0x06>;
		enable-active-high;
		regulator-always-on;
		phandle = <0x2c>;
	};

	gpio-regulator-tf_io {
		compatible = "regulator-gpio";
		regulator-name = "TF_IO";
		regulator-min-microvolt = <0x1b7740>;
		regulator-max-microvolt = <0x325aa0>;
		gpios = <0x3c 0x06 0x00>;
		gpios-states = <0x00>;
		states = <0x325aa0 0x00 0x1b7740 0x01>;
		phandle = <0x2d>;
	};

	regulator-flash_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "FLASH_1V8";
		regulator-min-microvolt = <0x1b7740>;
		regulator-max-microvolt = <0x1b7740>;
		vin-supply = <0x33>;
		regulator-always-on;
		phandle = <0x34>;
	};

	regulator-main_12v {
		compatible = "regulator-fixed";
		regulator-name = "12V";
		regulator-min-microvolt = <0xb71b00>;
		regulator-max-microvolt = <0xb71b00>;
		regulator-always-on;
		phandle = <0x3d>;
	};

	regulator-vcc_5v {
		compatible = "regulator-fixed";
		regulator-name = "5V";
		regulator-min-microvolt = <0x4c4b40>;
		regulator-max-microvolt = <0x4c4b40>;
		regulator-always-on;
		vin-supply = <0x3d>;
		phandle = <0x16>;
	};

	regulator-vcc_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "VCC_1V8";
		regulator-min-microvolt = <0x1b7740>;
		regulator-max-microvolt = <0x1b7740>;
		vin-supply = <0x33>;
		regulator-always-on;
	};

	regulator-vcc_3v3 {
		compatible = "regulator-fixed";
		regulator-name = "VCC_3V3";
		regulator-min-microvolt = <0x325aa0>;
		regulator-max-microvolt = <0x325aa0>;
		vin-supply = <0x3e>;
		regulator-always-on;
		phandle = <0x33>;
	};

	regulator-vddcpu {
		compatible = "pwm-regulator";
		regulator-name = "VDDCPU";
		regulator-min-microvolt = <0xb0068>;
		regulator-max-microvolt = <0xf9830>;
		vin-supply = <0x3d>;
		pwms = <0x3f 0x01 0x4e2 0x00>;
		pwm-dutycycle-range = <0x64 0x00>;
		regulator-boot-on;
		regulator-always-on;
		phandle = <0x3a>;
	};

	regulator-usb_pwr_en {
		compatible = "regulator-fixed";
		regulator-name = "USB_PWR_EN";
		regulator-min-microvolt = <0x4c4b40>;
		regulator-max-microvolt = <0x4c4b40>;
		vin-supply = <0x16>;
		gpio = <0x3c 0x02 0x00>;
		enable-active-high;
		phandle = <0x37>;
	};

	regulator-vddao_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "VDDAO_1V8";
		regulator-min-microvolt = <0x1b7740>;
		regulator-max-microvolt = <0x1b7740>;
		vin-supply = <0x3e>;
		regulator-always-on;
	};

	regulator-vddao_3v3 {
		compatible = "regulator-fixed";
		regulator-name = "VDDAO_3V3";
		regulator-min-microvolt = <0x325aa0>;
		regulator-max-microvolt = <0x325aa0>;
		vin-supply = <0x3d>;
		regulator-always-on;
		phandle = <0x3e>;
	};

	hdmi-connector {
		compatible = "hdmi-connector";
		type = [61 00];

		port {

			endpoint {
				remote-endpoint = <0x40>;
				phandle = <0x18>;
			};
		};
	};

	sound {
		compatible = "amlogic,axg-sound-card";
		audio-aux-devs = <0x41>;
		audio-routing = "TDMOUT_B IN 0\0FRDDR_A OUT 1\0TDMOUT_B IN 1\0FRDDR_B OUT 1\0TDMOUT_B IN 2\0FRDDR_C OUT 1\0TDM_B Playback\0TDMOUT_B OUT";
		assigned-clocks = <0x02 0x0d 0x02 0x0b 0x02 0x0c>;
		assigned-clock-parents = <0x00 0x00 0x00>;
		assigned-clock-rates = <0x11940000 0x10266000 0x17700000>;
		status = "okay";
		model = "ODROID-C4";

		dai-link-0 {
			sound-dai = <0x42>;
		};

		dai-link-1 {
			sound-dai = <0x43>;
		};

		dai-link-2 {
			sound-dai = <0x44>;
		};

		dai-link-3 {
			sound-dai = <0x45>;
			dai-format = "i2s";
			dai-tdm-slot-tx-mask-0 = <0x01 0x01>;
			dai-tdm-slot-tx-mask-1 = <0x01 0x01>;
			dai-tdm-slot-tx-mask-2 = <0x01 0x01>;
			dai-tdm-slot-tx-mask-3 = <0x01 0x01>;
			mclk-fs = <0x100>;

			codec {
				sound-dai = <0x46 0x01>;
			};
		};

		dai-link-4 {
			sound-dai = <0x46 0x03>;

			codec {
				sound-dai = <0x47>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		led-blue {
			color = <0x03>;
			function = "status";
			gpios = <0x3c 0x0b 0x00>;
			linux,default-trigger = "heartbeat";
			panic-indicator;
		};
	};

	regulator-hub_5v {
		compatible = "regulator-fixed";
		regulator-name = "HUB_5V";
		regulator-min-microvolt = <0x4c4b40>;
		regulator-max-microvolt = <0x4c4b40>;
		vin-supply = <0x16>;
		gpio = <0x2b 0x14 0x00>;
		enable-active-high;
		phandle = <0x1c>;
	};
};