1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef __ASM_MACH_ATH25_PLATFORM_H
3 #define __ASM_MACH_ATH25_PLATFORM_H
4 
5 #include <linux/etherdevice.h>
6 
7 /*
8  * This is board-specific data that is stored in a "fixed" location in flash.
9  * It is shared across operating systems, so it should not be changed lightly.
10  * The main reason we need it is in order to extract the ethernet MAC
11  * address(es).
12  */
13 struct ath25_boarddata {
14 	u32 magic;                   /* board data is valid */
15 #define ATH25_BD_MAGIC 0x35333131    /* "5311", for all 531x/231x platforms */
16 	u16 cksum;                   /* checksum (starting with BD_REV 2) */
17 	u16 rev;                     /* revision of this struct */
18 #define BD_REV 4
19 	char board_name[64];         /* Name of board */
20 	u16 major;                   /* Board major number */
21 	u16 minor;                   /* Board minor number */
22 	u32 flags;                   /* Board configuration */
23 #define BD_ENET0        0x00000001   /* ENET0 is stuffed */
24 #define BD_ENET1        0x00000002   /* ENET1 is stuffed */
25 #define BD_UART1        0x00000004   /* UART1 is stuffed */
26 #define BD_UART0        0x00000008   /* UART0 is stuffed (dma) */
27 #define BD_RSTFACTORY   0x00000010   /* Reset factory defaults stuffed */
28 #define BD_SYSLED       0x00000020   /* System LED stuffed */
29 #define BD_EXTUARTCLK   0x00000040   /* External UART clock */
30 #define BD_CPUFREQ      0x00000080   /* cpu freq is valid in nvram */
31 #define BD_SYSFREQ      0x00000100   /* sys freq is set in nvram */
32 #define BD_WLAN0        0x00000200   /* Enable WLAN0 */
33 #define BD_MEMCAP       0x00000400   /* CAP SDRAM @ mem_cap for testing */
34 #define BD_DISWATCHDOG  0x00000800   /* disable system watchdog */
35 #define BD_WLAN1        0x00001000   /* Enable WLAN1 (ar5212) */
36 #define BD_ISCASPER     0x00002000   /* FLAG for AR2312 */
37 #define BD_WLAN0_2G_EN  0x00004000   /* FLAG for radio0_2G */
38 #define BD_WLAN0_5G_EN  0x00008000   /* FLAG for radio0_2G */
39 #define BD_WLAN1_2G_EN  0x00020000   /* FLAG for radio0_2G */
40 #define BD_WLAN1_5G_EN  0x00040000   /* FLAG for radio0_2G */
41 	u16 reset_config_gpio;       /* Reset factory GPIO pin */
42 	u16 sys_led_gpio;            /* System LED GPIO pin */
43 
44 	u32 cpu_freq;                /* CPU core frequency in Hz */
45 	u32 sys_freq;                /* System frequency in Hz */
46 	u32 cnt_freq;                /* Calculated C0_COUNT frequency */
47 
48 	u8  wlan0_mac[ETH_ALEN];
49 	u8  enet0_mac[ETH_ALEN];
50 	u8  enet1_mac[ETH_ALEN];
51 
52 	u16 pci_id;                  /* Pseudo PCIID for common code */
53 	u16 mem_cap;                 /* cap bank1 in MB */
54 
55 	/* version 3 */
56 	u8  wlan1_mac[ETH_ALEN];     /* (ar5212) */
57 };
58 
59 #define BOARD_CONFIG_BUFSZ		0x1000
60 
61 /*
62  * Platform device information for the Wireless MAC
63  */
64 struct ar231x_board_config {
65 	u16 devid;
66 
67 	/* board config data */
68 	struct ath25_boarddata *config;
69 
70 	/* radio calibration data */
71 	const char *radio;
72 };
73 
74 #endif /* __ASM_MACH_ATH25_PLATFORM_H */
75