1# SPDX-License-Identifier: GPL-2.0-only
2#
3# QCOM Soc drivers
4#
5menu "Qualcomm SoC drivers"
6
7config QCOM_AOSS_QMP
8	tristate "Qualcomm AOSS Driver"
9	depends on ARCH_QCOM || COMPILE_TEST
10	depends on MAILBOX
11	depends on COMMON_CLK && PM
12	select PM_GENERIC_DOMAINS
13	help
14	  This driver provides the means of communicating with and controlling
15	  the low-power state for resources related to the remoteproc
16	  subsystems as well as controlling the debug clocks exposed by the Always On
17	  Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
18
19config QCOM_COMMAND_DB
20	tristate "Qualcomm Command DB"
21	depends on ARCH_QCOM || COMPILE_TEST
22	depends on OF_RESERVED_MEM
23	help
24	  Command DB queries shared memory by key string for shared system
25	  resources. Platform drivers that require to set state of a shared
26	  resource on a RPM-hardened platform must use this database to get
27	  SoC specific identifier and information for the shared resources.
28
29config QCOM_CPR
30	tristate "QCOM Core Power Reduction (CPR) support"
31	depends on ARCH_QCOM && HAS_IOMEM
32	select PM_OPP
33	select REGMAP
34	help
35	  Say Y here to enable support for the CPR hardware found on Qualcomm
36	  SoCs like QCS404.
37
38	  This driver populates CPU OPPs tables and makes adjustments to the
39	  tables based on feedback from the CPR hardware. If you want to do
40	  CPUfrequency scaling say Y here.
41
42	  To compile this driver as a module, choose M here: the module will
43	  be called qcom-cpr
44
45config QCOM_GENI_SE
46	tristate "QCOM GENI Serial Engine Driver"
47	depends on ARCH_QCOM || COMPILE_TEST
48	help
49	  This driver is used to manage Generic Interface (GENI) firmware based
50	  Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
51	  driver is also used to manage the common aspects of multiple Serial
52	  Engines present in the QUP.
53
54config QCOM_GSBI
55	tristate "QCOM General Serial Bus Interface"
56	depends on ARCH_QCOM || COMPILE_TEST
57	select MFD_SYSCON
58	help
59	  Say y here to enable GSBI support.  The GSBI provides control
60	  functions for connecting the underlying serial UART, SPI, and I2C
61	  devices to the output pins.
62
63config QCOM_LLCC
64	tristate "Qualcomm Technologies, Inc. LLCC driver"
65	depends on ARCH_QCOM || COMPILE_TEST
66	select REGMAP_MMIO
67	help
68	  Qualcomm Technologies, Inc. platform specific
69	  Last Level Cache Controller(LLCC) driver for platforms such as,
70	  SDM845. This provides interfaces to clients that use the LLCC.
71	  Say yes here to enable LLCC slice driver.
72
73config QCOM_KRYO_L2_ACCESSORS
74	bool
75	depends on ARCH_QCOM && ARM64 || COMPILE_TEST
76
77config QCOM_MDT_LOADER
78	tristate
79	select QCOM_SCM
80
81config QCOM_OCMEM
82	tristate "Qualcomm On Chip Memory (OCMEM) driver"
83	depends on ARCH_QCOM
84	select QCOM_SCM
85	help
86	  The On Chip Memory (OCMEM) allocator allows various clients to
87	  allocate memory from OCMEM based on performance, latency and power
88	  requirements. This is typically used by the GPU, camera/video, and
89	  audio components on some Snapdragon SoCs.
90
91config QCOM_PDR_HELPERS
92	tristate
93	select QCOM_QMI_HELPERS
94	depends on NET
95
96config QCOM_PMIC_GLINK
97	tristate "Qualcomm PMIC GLINK driver"
98	depends on RPMSG
99	depends on TYPEC
100	depends on DRM
101	depends on NET
102	depends on OF
103	select AUXILIARY_BUS
104	select QCOM_PDR_HELPERS
105	help
106	  The Qualcomm PMIC GLINK driver provides access, over GLINK, to the
107	  USB and battery firmware running on one of the coprocessors in
108	  several modern Qualcomm platforms.
109
110	  Say yes here to support USB-C and battery status on modern Qualcomm
111	  platforms.
112
113config QCOM_QMI_HELPERS
114	tristate
115	depends on NET
116
117config QCOM_RAMP_CTRL
118	tristate "Qualcomm Ramp Controller driver"
119	depends on ARCH_QCOM || COMPILE_TEST
120	help
121	  The Ramp Controller is used to program the sequence ID for pulse
122	  swallowing, enable sequence and link sequence IDs for the CPU
123	  cores on some Qualcomm SoCs.
124	  Say y here to enable support for the ramp controller.
125
126config QCOM_RMTFS_MEM
127	tristate "Qualcomm Remote Filesystem memory driver"
128	depends on ARCH_QCOM
129	select QCOM_SCM
130	help
131	  The Qualcomm remote filesystem memory driver is used for allocating
132	  and exposing regions of shared memory with remote processors for the
133	  purpose of exchanging sector-data between the remote filesystem
134	  service and its clients.
135
136	  Say y here if you intend to boot the modem remoteproc.
137
138config QCOM_RPMH
139	tristate "Qualcomm RPM-Hardened (RPMH) Communication"
140	depends on ARCH_QCOM || COMPILE_TEST
141	depends on (QCOM_COMMAND_DB || !QCOM_COMMAND_DB)
142	help
143	  Support for communication with the hardened-RPM blocks in
144	  Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
145	  internal bus to transmit state requests for shared resources. A set
146	  of hardware components aggregate requests for these resources and
147	  help apply the aggregated state on the resource.
148
149config QCOM_RPMHPD
150	tristate "Qualcomm RPMh Power domain driver"
151	depends on QCOM_RPMH && QCOM_COMMAND_DB
152	help
153	  QCOM RPMh Power domain driver to support power-domains with
154	  performance states. The driver communicates a performance state
155	  value to RPMh which then translates it into corresponding voltage
156	  for the voltage rail.
157
158config QCOM_RPMPD
159	tristate "Qualcomm RPM Power domain driver"
160	depends on PM && OF
161	depends on QCOM_SMD_RPM
162	select PM_GENERIC_DOMAINS
163	select PM_GENERIC_DOMAINS_OF
164	help
165	  QCOM RPM Power domain driver to support power-domains with
166	  performance states. The driver communicates a performance state
167	  value to RPM which then translates it into corresponding voltage
168	  for the voltage rail.
169
170config QCOM_SMEM
171	tristate "Qualcomm Shared Memory Manager (SMEM)"
172	depends on ARCH_QCOM || COMPILE_TEST
173	depends on HWSPINLOCK
174	help
175	  Say y here to enable support for the Qualcomm Shared Memory Manager.
176	  The driver provides an interface to items in a heap shared among all
177	  processors in a Qualcomm platform.
178
179config QCOM_SMD_RPM
180	tristate "Qualcomm Resource Power Manager (RPM) over SMD"
181	depends on ARCH_QCOM || COMPILE_TEST
182	depends on RPMSG
183	help
184	  If you say yes to this option, support will be included for the
185	  Resource Power Manager system found in the Qualcomm 8974 based
186	  devices.
187
188	  This is required to access many regulators, clocks and bus
189	  frequencies controlled by the RPM on these devices.
190
191	  Say M here if you want to include support for the Qualcomm RPM as a
192	  module. This will build a module called "qcom-smd-rpm".
193
194config QCOM_SMEM_STATE
195	bool
196
197config QCOM_SMP2P
198	tristate "Qualcomm Shared Memory Point to Point support"
199	depends on MAILBOX
200	depends on QCOM_SMEM
201	select QCOM_SMEM_STATE
202	select IRQ_DOMAIN
203	help
204	  Say yes here to support the Qualcomm Shared Memory Point to Point
205	  protocol.
206
207config QCOM_SMSM
208	tristate "Qualcomm Shared Memory State Machine"
209	depends on QCOM_SMEM
210	select QCOM_SMEM_STATE
211	select IRQ_DOMAIN
212	help
213	  Say yes here to support the Qualcomm Shared Memory State Machine.
214	  The state machine is represented by bits in shared memory.
215
216config QCOM_SOCINFO
217	tristate "Qualcomm socinfo driver"
218	depends on QCOM_SMEM
219	select SOC_BUS
220	help
221	 Say yes here to support the Qualcomm socinfo driver, providing
222	 information about the SoC to user space.
223
224config QCOM_SPM
225	tristate "Qualcomm Subsystem Power Manager (SPM)"
226	depends on ARCH_QCOM || COMPILE_TEST
227	select QCOM_SCM
228	help
229	  Enable the support for the Qualcomm Subsystem Power Manager, used
230	  to manage cores, L2 low power modes and to configure the internal
231	  Adaptive Voltage Scaler parameters, where supported.
232
233config QCOM_STATS
234	tristate "Qualcomm Technologies, Inc. (QTI) Sleep stats driver"
235	depends on (ARCH_QCOM && DEBUG_FS) || COMPILE_TEST
236	depends on QCOM_SMEM
237	help
238	  Qualcomm Technologies, Inc. (QTI) Sleep stats driver to read
239	  the shared memory exported by the remote processor related to
240	  various SoC level low power modes statistics and export to debugfs
241	  interface.
242
243config QCOM_WCNSS_CTRL
244	tristate "Qualcomm WCNSS control driver"
245	depends on ARCH_QCOM || COMPILE_TEST
246	depends on RPMSG
247	help
248	  Client driver for the WCNSS_CTRL SMD channel, used to download nv
249	  firmware to a newly booted WCNSS chip.
250
251config QCOM_APR
252	tristate "Qualcomm APR/GPR Bus (Asynchronous/Generic Packet Router)"
253	depends on ARCH_QCOM || COMPILE_TEST
254	depends on RPMSG
255	depends on NET
256	select QCOM_PDR_HELPERS
257	help
258	  Enable APR IPC protocol support between
259	  application processor and QDSP6. APR is
260	  used by audio driver to configure QDSP6
261	  ASM, ADM and AFE modules.
262
263config QCOM_ICC_BWMON
264	tristate "QCOM Interconnect Bandwidth Monitor driver"
265	depends on ARCH_QCOM || COMPILE_TEST
266	select PM_OPP
267	select REGMAP_MMIO
268	help
269	  Sets up driver monitoring bandwidth on various interconnects and
270	  based on that voting for interconnect bandwidth, adjusting their
271	  speed to current demand.
272	  Current implementation brings support for BWMON v4, used for example
273	  on SDM845 to measure bandwidth between CPU (gladiator_noc) and Last
274	  Level Cache (memnoc).  Usage of this BWMON allows to remove some of
275	  the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high
276	  memory throughput even with lower CPU frequencies.
277
278endmenu
279