1# SPDX-License-Identifier: GPL-2.0-only
2config STMMAC_ETH
3	tristate "STMicroelectronics Multi-Gigabit Ethernet driver"
4	depends on HAS_IOMEM && HAS_DMA
5	depends on PTP_1588_CLOCK_OPTIONAL
6	select MII
7	select PCS_XPCS
8	select PAGE_POOL
9	select PHYLINK
10	select CRC32
11	select RESET_CONTROLLER
12	help
13	  This is the driver for the Ethernet IPs built around a
14	  Synopsys IP Core.
15
16if STMMAC_ETH
17
18config STMMAC_SELFTESTS
19	bool "Support for STMMAC Selftests"
20	depends on INET
21	depends on STMMAC_ETH
22	default n
23	help
24	  This adds support for STMMAC Selftests using ethtool. Enable this
25	  feature if you are facing problems with your HW and submit the test
26	  results to the netdev Mailing List.
27
28config STMMAC_PLATFORM
29	tristate "STMMAC Platform bus support"
30	depends on STMMAC_ETH
31	select MFD_SYSCON
32	default y
33	help
34	  This selects the platform specific bus support for the stmmac driver.
35	  This is the driver used on several SoCs:
36	  STi, Allwinner, Amlogic Meson, Altera SOCFPGA.
37
38	  If you have a controller with this interface, say Y or M here.
39
40	  If unsure, say N.
41
42if STMMAC_PLATFORM
43
44config DWMAC_DWC_QOS_ETH
45	tristate "Support for snps,dwc-qos-ethernet.txt DT binding."
46	select CRC32
47	select MII
48	depends on OF && HAS_DMA
49	help
50	  Support for chips using the snps,dwc-qos-ethernet.txt DT binding.
51
52config DWMAC_GENERIC
53	tristate "Generic driver for DWMAC"
54	default STMMAC_PLATFORM
55	help
56	  Generic DWMAC driver for platforms that don't require any
57	  platform specific code to function or is using platform
58	  data for setup.
59
60config DWMAC_ANARION
61	tristate "Adaptrum Anarion GMAC support"
62	default ARC
63	depends on OF && (ARC || COMPILE_TEST)
64	help
65	  Support for Adaptrum Anarion GMAC Ethernet controller.
66
67	  This selects the Anarion SoC glue layer support for the stmmac driver.
68
69config DWMAC_INGENIC
70	tristate "Ingenic MAC support"
71	default MACH_INGENIC
72	depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST)
73	select MFD_SYSCON
74	help
75	  Support for ethernet controller on Ingenic SoCs.
76
77	  This selects Ingenic SoCs glue layer support for the stmmac
78	  device driver. This driver is used on for the Ingenic SoCs
79	  MAC ethernet controller.
80
81config DWMAC_IPQ806X
82	tristate "QCA IPQ806x DWMAC support"
83	default ARCH_QCOM
84	depends on OF && (ARCH_QCOM || COMPILE_TEST)
85	select MFD_SYSCON
86	help
87	  Support for QCA IPQ806X DWMAC Ethernet.
88
89	  This selects the IPQ806x SoC glue layer support for the stmmac
90	  device driver. This driver does not use any of the hardware
91	  acceleration features available on this SoC. Network devices
92	  will behave like standard non-accelerated ethernet interfaces.
93
94	  Select the QCOM_SOCINFO config flag to enable specific dwmac
95	  fixup based on the ipq806x SoC revision.
96
97config DWMAC_LPC18XX
98	tristate "NXP LPC18xx/43xx DWMAC support"
99	default ARCH_LPC18XX
100	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
101	select MFD_SYSCON
102	help
103	  Support for NXP LPC18xx/43xx DWMAC Ethernet.
104
105config DWMAC_MEDIATEK
106	tristate "MediaTek MT27xx GMAC support"
107	depends on OF && (ARCH_MEDIATEK || COMPILE_TEST)
108	help
109	  Support for MediaTek GMAC Ethernet controller.
110
111	  This selects the MT2712 SoC support for the stmmac driver.
112
113config DWMAC_MESON
114	tristate "Amlogic Meson dwmac support"
115	default ARCH_MESON
116	depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
117	help
118	  Support for Ethernet controller on Amlogic Meson SoCs.
119
120	  This selects the Amlogic Meson SoC glue layer support for
121	  the stmmac device driver. This driver is used for Meson6,
122	  Meson8, Meson8b and GXBB SoCs.
123
124config DWMAC_OXNAS
125	tristate "Oxford Semiconductor OXNAS dwmac support"
126	default ARCH_OXNAS
127	depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST)
128	select MFD_SYSCON
129	help
130	  Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
131
132	  This selects the Oxford Semiconductor OXNASSoC glue layer support for
133	  the stmmac device driver. This driver is used for OX820.
134
135config DWMAC_QCOM_ETHQOS
136	tristate "Qualcomm ETHQOS support"
137	default ARCH_QCOM
138	depends on OF && (ARCH_QCOM || COMPILE_TEST)
139	help
140	  Support for the Qualcomm ETHQOS core.
141
142	  This selects the Qualcomm ETHQOS glue layer support for the
143	  stmmac device driver.
144
145config DWMAC_ROCKCHIP
146	tristate "Rockchip dwmac support"
147	default ARCH_ROCKCHIP
148	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
149	select MFD_SYSCON
150	help
151	  Support for Ethernet controller on Rockchip RK3288 SoC.
152
153	  This selects the Rockchip RK3288 SoC glue layer support for
154	  the stmmac device driver.
155
156config DWMAC_SOCFPGA
157	tristate "SOCFPGA dwmac support"
158	default ARCH_INTEL_SOCFPGA
159	depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST)
160	select MFD_SYSCON
161	help
162	  Support for ethernet controller on Altera SOCFPGA
163
164	  This selects the Altera SOCFPGA SoC glue layer support
165	  for the stmmac device driver. This driver is used for
166	  arria5 and cyclone5 FPGA SoCs.
167
168config DWMAC_STI
169	tristate "STi GMAC support"
170	default ARCH_STI
171	depends on OF && (ARCH_STI || COMPILE_TEST)
172	select MFD_SYSCON
173	help
174	  Support for ethernet controller on STi SOCs.
175
176	  This selects STi SoC glue layer support for the stmmac
177	  device driver. This driver is used on for the STi series
178	  SOCs GMAC ethernet controller.
179
180config DWMAC_STM32
181	tristate "STM32 DWMAC support"
182	default ARCH_STM32
183	depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
184	select MFD_SYSCON
185	help
186	  Support for ethernet controller on STM32 SOCs.
187
188	  This selects STM32 SoC glue layer support for the stmmac
189	  device driver. This driver is used on for the STM32 series
190	  SOCs GMAC ethernet controller.
191
192config DWMAC_SUNXI
193	tristate "Allwinner GMAC support"
194	default ARCH_SUNXI
195	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
196	help
197	  Support for Allwinner A20/A31 GMAC ethernet controllers.
198
199	  This selects Allwinner SoC glue layer support for the
200	  stmmac device driver. This driver is used for A20/A31
201	  GMAC ethernet controller.
202
203config DWMAC_SUN8I
204	tristate "Allwinner sun8i GMAC support"
205	default ARCH_SUNXI
206	depends on OF && (ARCH_SUNXI || COMPILE_TEST)
207	select MDIO_BUS_MUX
208	help
209	  Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
210
211	  This selects Allwinner SoC glue layer support for the
212	  stmmac device driver. This driver is used for H3/A83T/A64
213	  EMAC ethernet controller.
214
215config DWMAC_IMX8
216	tristate "NXP IMX8 DWMAC support"
217	default ARCH_MXC
218	depends on OF && (ARCH_MXC || COMPILE_TEST)
219	select MFD_SYSCON
220	help
221	  Support for ethernet controller on NXP i.MX8 SOCs.
222
223	  This selects NXP SoC glue layer support for the stmmac
224	  device driver. This driver is used for i.MX8 series like
225	  iMX8MP/iMX8DXL GMAC ethernet controller.
226
227config DWMAC_INTEL_PLAT
228	tristate "Intel dwmac support"
229	depends on OF && COMMON_CLK
230	depends on STMMAC_ETH
231	help
232	  Support for ethernet controllers on Intel SoCs
233
234	  This selects the Intel platform specific glue layer support for
235	  the stmmac device driver. This driver is used for the Intel Keem Bay
236	  SoC.
237
238config DWMAC_TEGRA
239	tristate "NVIDIA Tegra MGBE support"
240	depends on ARCH_TEGRA || COMPILE_TEST
241	help
242	  This selects the Multi-GigaBit Ethernet (MGBE) Controller that is
243	  found on the NVIDIA Tegra SoC devices. This driver provides the glue
244	  layer on top of the stmmac driver required for these NVIDIA Tegra SoC
245	  devices.
246
247config DWMAC_VISCONTI
248	tristate "Toshiba Visconti DWMAC support"
249	default ARCH_VISCONTI
250	depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST)
251	help
252	  Support for ethernet controller on Visconti SoCs.
253
254endif
255
256config DWMAC_INTEL
257	tristate "Intel GMAC support"
258	default X86
259	depends on X86 && STMMAC_ETH && PCI
260	depends on COMMON_CLK
261	help
262	  This selects the Intel platform specific bus support for the
263	  stmmac driver. This driver is used for Intel Quark/EHL/TGL.
264
265config DWMAC_LOONGSON
266	tristate "Loongson PCI DWMAC support"
267	default MACH_LOONGSON64
268	depends on STMMAC_ETH && PCI
269	depends on COMMON_CLK
270	help
271	  This selects the LOONGSON PCI bus support for the stmmac driver,
272	  Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge.
273
274config STMMAC_PCI
275	tristate "STMMAC PCI bus support"
276	depends on STMMAC_ETH && PCI
277	depends on COMMON_CLK
278	help
279	  This selects the platform specific bus support for the stmmac driver.
280	  This driver was tested on XLINX XC2V3000 FF1152AMT0221
281	  D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit.
282
283	  If you have a controller with this interface, say Y or M here.
284
285	  If unsure, say N.
286endif
287