1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Touchscreen driver configuration
4#
5menuconfig INPUT_TOUCHSCREEN
6	bool "Touchscreens"
7	help
8	  Say Y here, and a list of supported touchscreens will be displayed.
9	  This option doesn't affect the kernel.
10
11	  If unsure, say Y.
12
13if INPUT_TOUCHSCREEN
14
15config TOUCHSCREEN_88PM860X
16	tristate "Marvell 88PM860x touchscreen"
17	depends on MFD_88PM860X
18	help
19	  Say Y here if you have a 88PM860x PMIC and want to enable
20	  support for the built-in touchscreen.
21
22	  If unsure, say N.
23
24	  To compile this driver as a module, choose M here: the
25	  module will be called 88pm860x-ts.
26
27config TOUCHSCREEN_ADS7846
28	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
29	depends on SPI_MASTER
30	depends on HWMON = n || HWMON
31	help
32	  Say Y here if you have a touchscreen interface using the
33	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
34	  and your board-specific setup code includes that in its
35	  table of SPI devices.
36
37	  If HWMON is selected, and the driver is told the reference voltage
38	  on your board, you will also get hwmon interfaces for the voltage
39	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
40
41	  If unsure, say N (but it's safe to say "Y").
42
43	  To compile this driver as a module, choose M here: the
44	  module will be called ads7846.
45
46config TOUCHSCREEN_AD7877
47	tristate "AD7877 based touchscreens"
48	depends on SPI_MASTER
49	help
50	  Say Y here if you have a touchscreen interface using the
51	  AD7877 controller, and your board-specific initialization
52	  code includes that in its table of SPI devices.
53
54	  If unsure, say N (but it's safe to say "Y").
55
56	  To compile this driver as a module, choose M here: the
57	  module will be called ad7877.
58
59config TOUCHSCREEN_AD7879
60	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
61	help
62	  Say Y here if you want to support a touchscreen interface using
63	  the AD7879-1/AD7889-1 controller.
64
65	  You should select a bus connection too.
66
67	  To compile this driver as a module, choose M here: the
68	  module will be called ad7879.
69
70config TOUCHSCREEN_AD7879_I2C
71	tristate "support I2C bus connection"
72	depends on TOUCHSCREEN_AD7879 && I2C
73	select REGMAP_I2C
74	help
75	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
76
77	  To compile this driver as a module, choose M here: the
78	  module will be called ad7879-i2c.
79
80config TOUCHSCREEN_AD7879_SPI
81	tristate "support SPI bus connection"
82	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
83	select REGMAP_SPI
84	help
85	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
86
87	  If unsure, say N (but it's safe to say "Y").
88
89	  To compile this driver as a module, choose M here: the
90	  module will be called ad7879-spi.
91
92config TOUCHSCREEN_ADC
93	tristate "Generic ADC based resistive touchscreen"
94	depends on IIO
95	select IIO_BUFFER
96	select IIO_BUFFER_CB
97	help
98	  Say Y here if you want to use the generic ADC
99	  resistive touchscreen driver.
100
101	  If unsure, say N (but it's safe to say "Y").
102
103	  To compile this driver as a module, choose M here: the
104	  module will be called resistive-adc-touch.ko.
105
106config TOUCHSCREEN_AR1021_I2C
107	tristate "Microchip AR1020/1021 i2c touchscreen"
108	depends on I2C && OF
109	help
110	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
111	  controller chip in your system.
112
113	  If unsure, say N.
114
115	  To compile this driver as a module, choose M here: the
116	  module will be called ar1021_i2c.
117
118config TOUCHSCREEN_ATMEL_MXT
119	tristate "Atmel mXT I2C Touchscreen"
120	depends on I2C
121	select FW_LOADER
122	help
123	  Say Y here if you have Atmel mXT series I2C touchscreen,
124	  such as AT42QT602240/ATMXT224, connected to your system.
125
126	  If unsure, say N.
127
128	  To compile this driver as a module, choose M here: the
129	  module will be called atmel_mxt_ts.
130
131config TOUCHSCREEN_ATMEL_MXT_T37
132	bool "Support T37 Diagnostic Data"
133	depends on TOUCHSCREEN_ATMEL_MXT
134	depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
135	select VIDEOBUF2_VMALLOC
136	help
137	  Say Y here if you want support to output data from the T37
138	  Diagnostic Data object using a V4L device.
139
140config TOUCHSCREEN_AUO_PIXCIR
141	tristate "AUO in-cell touchscreen using Pixcir ICs"
142	depends on I2C
143	depends on GPIOLIB || COMPILE_TEST
144	help
145	  Say Y here if you have a AUO display with in-cell touchscreen
146	  using Pixcir ICs.
147
148	  If unsure, say N.
149
150	  To compile this driver as a module, choose M here: the
151	  module will be called auo-pixcir-ts.
152
153config TOUCHSCREEN_BU21013
154	tristate "BU21013 based touch panel controllers"
155	depends on I2C
156	help
157	  Say Y here if you have a bu21013 touchscreen connected to
158	  your system.
159
160	  If unsure, say N.
161
162	  To compile this driver as a module, choose M here: the
163	  module will be called bu21013_ts.
164
165config TOUCHSCREEN_BU21029
166	tristate "Rohm BU21029 based touch panel controllers"
167	depends on I2C
168	help
169	  Say Y here if you have a Rohm BU21029 touchscreen controller
170	  connected to your system.
171
172	  If unsure, say N.
173
174	  To compile this driver as a module, choose M here: the
175	  module will be called bu21029_ts.
176
177config TOUCHSCREEN_CHIPONE_ICN8318
178	tristate "chipone icn8318 touchscreen controller"
179	depends on GPIOLIB || COMPILE_TEST
180	depends on I2C
181	depends on OF
182	help
183	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
184
185	  If unsure, say N.
186
187	  To compile this driver as a module, choose M here: the
188	  module will be called chipone_icn8318.
189
190config TOUCHSCREEN_CHIPONE_ICN8505
191	tristate "chipone icn8505 touchscreen controller"
192	depends on I2C && ACPI
193	help
194	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
195
196	  If unsure, say N.
197
198	  To compile this driver as a module, choose M here: the
199	  module will be called chipone_icn8505.
200
201config TOUCHSCREEN_CY8CTMA140
202	tristate "cy8ctma140 touchscreen"
203	depends on I2C
204	help
205	  Say Y here if you have a Cypress CY8CTMA140 capacitive
206	  touchscreen also just known as "TMA140"
207
208	  If unsure, say N.
209
210	  To compile this driver as a module, choose M here: the
211	  module will be called cy8ctma140.
212
213config TOUCHSCREEN_CY8CTMG110
214	tristate "cy8ctmg110 touchscreen"
215	depends on I2C
216	depends on GPIOLIB || COMPILE_TEST
217	help
218	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
219	  an AAVA device.
220
221	  If unsure, say N.
222
223	  To compile this driver as a module, choose M here: the
224	  module will be called cy8ctmg110_ts.
225
226config TOUCHSCREEN_CYTTSP_CORE
227	tristate "Cypress TTSP touchscreen"
228	help
229	  Say Y here if you have a touchscreen using controller from
230	  the Cypress TrueTouch(tm) Standard Product family connected
231	  to your system. You will also need to select appropriate
232	  bus connection below.
233
234	  If unsure, say N.
235
236	  To compile this driver as a module, choose M here: the
237	  module will be called cyttsp_core.
238
239config TOUCHSCREEN_CYTTSP_I2C
240	tristate "support I2C bus connection"
241	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
242	help
243	  Say Y here if the touchscreen is connected via I2C bus.
244
245	  To compile this driver as a module, choose M here: the
246	  module will be called cyttsp_i2c.
247
248config TOUCHSCREEN_CYTTSP_SPI
249	tristate "support SPI bus connection"
250	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
251	help
252	  Say Y here if the touchscreen is connected via SPI bus.
253
254	  To compile this driver as a module, choose M here: the
255	  module will be called cyttsp_spi.
256
257config TOUCHSCREEN_CYTTSP4_CORE
258	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
259	help
260	  Core driver for Cypress TrueTouch(tm) Standard Product
261	  Generation4 touchscreen controllers.
262
263	  Say Y here if you have a Cypress Gen4 touchscreen.
264
265	  If unsure, say N.
266
267	  To compile this driver as a module, choose M here.
268
269config TOUCHSCREEN_CYTTSP4_I2C
270	tristate "support I2C bus connection"
271	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
272	help
273	  Say Y here if the touchscreen is connected via I2C bus.
274
275	  To compile this driver as a module, choose M here: the
276	  module will be called cyttsp4_i2c.
277
278config TOUCHSCREEN_CYTTSP4_SPI
279	tristate "support SPI bus connection"
280	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
281	help
282	  Say Y here if the touchscreen is connected via SPI bus.
283
284	  To compile this driver as a module, choose M here: the
285	  module will be called cyttsp4_spi.
286
287config TOUCHSCREEN_CYTTSP5
288	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
289	depends on I2C
290	select REGMAP_I2C
291	select CRC_ITU_T
292	help
293	  Driver for Parade TrueTouch Standard Product Generation 5
294	  touchscreen controllers. I2C bus interface support only.
295
296	  Say Y here if you have a Cypress Gen5 touchscreen.
297
298	  If unsure, say N.
299
300	  To compile this driver as a module, choose M here: the
301	  module will be called cyttsp5.
302
303config TOUCHSCREEN_DA9034
304	tristate "Touchscreen support for Dialog Semiconductor DA9034"
305	depends on PMIC_DA903X
306	default y
307	help
308	  Say Y here to enable the support for the touchscreen found
309	  on Dialog Semiconductor DA9034 PMIC.
310
311	  If unsure, say N.
312
313	  To compile this driver as a module, choose M here: the
314	  module will be called da9034-ts.
315
316config TOUCHSCREEN_DA9052
317	tristate "Dialog DA9052/DA9053 TSI"
318	depends on PMIC_DA9052
319	help
320	  Say Y here to support the touchscreen found on Dialog Semiconductor
321	  DA9052-BC and DA9053-AA/Bx PMICs.
322
323	  If unsure, say N.
324
325	  To compile this driver as a module, choose M here: the
326	  module will be called da9052_tsi.
327
328config TOUCHSCREEN_DYNAPRO
329	tristate "Dynapro serial touchscreen"
330	select SERIO
331	help
332	  Say Y here if you have a Dynapro serial touchscreen connected to
333	  your system.
334
335	  If unsure, say N.
336
337	  To compile this driver as a module, choose M here: the
338	  module will be called dynapro.
339
340config TOUCHSCREEN_HAMPSHIRE
341	tristate "Hampshire serial touchscreen"
342	select SERIO
343	help
344	  Say Y here if you have a Hampshire serial touchscreen connected to
345	  your system.
346
347	  If unsure, say N.
348
349	  To compile this driver as a module, choose M here: the
350	  module will be called hampshire.
351
352config TOUCHSCREEN_EETI
353	tristate "EETI touchscreen panel support"
354	depends on I2C
355	help
356	  Say Y here to enable support for I2C connected EETI touch panels.
357
358	  To compile this driver as a module, choose M here: the
359	  module will be called eeti_ts.
360
361config TOUCHSCREEN_EGALAX
362	tristate "EETI eGalax multi-touch panel support"
363	depends on I2C && OF
364	help
365	  Say Y here to enable support for I2C connected EETI
366	  eGalax multi-touch panels.
367
368	  To compile this driver as a module, choose M here: the
369	  module will be called egalax_ts.
370
371config TOUCHSCREEN_EGALAX_SERIAL
372	tristate "EETI eGalax serial touchscreen"
373	select SERIO
374	help
375	  Say Y here to enable support for serial connected EETI
376	  eGalax touch panels.
377
378	  To compile this driver as a module, choose M here: the
379	  module will be called egalax_ts_serial.
380
381config TOUCHSCREEN_EXC3000
382	tristate "EETI EXC3000 multi-touch panel support"
383	depends on I2C
384	help
385	  Say Y here to enable support for I2C connected EETI
386	  EXC3000 multi-touch panels.
387
388	  To compile this driver as a module, choose M here: the
389	  module will be called exc3000.
390
391config TOUCHSCREEN_FUJITSU
392	tristate "Fujitsu serial touchscreen"
393	select SERIO
394	help
395	  Say Y here if you have the Fujitsu touchscreen (such as one
396	  installed in Lifebook P series laptop) connected to your
397	  system.
398
399	  If unsure, say N.
400
401	  To compile this driver as a module, choose M here: the
402	  module will be called fujitsu-ts.
403
404config TOUCHSCREEN_GOODIX
405	tristate "Goodix I2C touchscreen"
406	depends on I2C
407	depends on GPIOLIB || COMPILE_TEST
408	help
409	  Say Y here if you have the Goodix touchscreen (such as one
410	  installed in Onda v975w tablets) connected to your
411	  system. It also supports 5-finger chip models, which can be
412	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
413
414	  If unsure, say N.
415
416	  To compile this driver as a module, choose M here: the
417	  module will be called goodix.
418
419config TOUCHSCREEN_HIDEEP
420	tristate "HiDeep Touch IC"
421	depends on I2C
422	help
423	  Say Y here if you have a touchscreen using HiDeep.
424
425	  If unsure, say N.
426
427	  To compile this driver as a module, choose M here : the
428	  module will be called hideep_ts.
429
430config TOUCHSCREEN_HYCON_HY46XX
431	tristate "Hycon hy46xx touchscreen support"
432	depends on I2C
433	help
434	  Say Y here if you have a touchscreen using Hycon hy46xx
435
436	  If unsure, say N.
437
438	  To compile this driver as a module, choose M here: the
439	  module will be called hycon-hy46xx.
440
441config TOUCHSCREEN_HYNITRON_CSTXXX
442	tristate "Hynitron touchscreen support"
443	depends on I2C
444	help
445	  Say Y here if you have a touchscreen using a Hynitron
446	  touchscreen controller.
447
448	  If unsure, say N.
449
450	  To compile this driver as a module, choose M here: the
451	  module will be called hynitron-cstxxx.
452
453config TOUCHSCREEN_ILI210X
454	tristate "Ilitek ILI210X based touchscreen"
455	depends on I2C
456	select CRC_CCITT
457	help
458	  Say Y here if you have a ILI210X based touchscreen
459	  controller. This driver supports models ILI2102,
460	  ILI2102s, ILI2103, ILI2103s and ILI2105.
461	  Such kind of chipsets can be found in Amazon Kindle Fire
462	  touchscreens.
463
464	  If unsure, say N.
465
466	  To compile this driver as a module, choose M here: the
467	  module will be called ili210x.
468
469config TOUCHSCREEN_ILITEK
470	tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
471	depends on I2C
472	help
473	  Say Y here if you have touchscreen with ILITEK touch IC,
474	  it supports 213X/23XX/25XX and other Lego series.
475
476	  If unsure, say N.
477
478	  To compile this driver as a module, choose M here: the
479	  module will be called ilitek_ts_i2c.
480
481config TOUCHSCREEN_IPROC
482	tristate "IPROC touch panel driver support"
483	depends on ARCH_BCM_IPROC || COMPILE_TEST
484	help
485	  Say Y here if you want to add support for the IPROC touch
486	  controller to your system.
487
488	  If unsure, say N.
489
490	  To compile this driver as a module, choose M here: the
491	  module will be called bcm_iproc_tsc.
492
493config TOUCHSCREEN_S6SY761
494	tristate "Samsung S6SY761 Touchscreen driver"
495	depends on I2C
496	help
497	  Say Y if you have the Samsung S6SY761 driver
498
499	  If unsure, say N
500
501	  To compile this driver as module, choose M here: the
502	  module will be called s6sy761.
503
504config TOUCHSCREEN_GUNZE
505	tristate "Gunze AHL-51S touchscreen"
506	select SERIO
507	help
508	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
509	  your system.
510
511	  If unsure, say N.
512
513	  To compile this driver as a module, choose M here: the
514	  module will be called gunze.
515
516config TOUCHSCREEN_EKTF2127
517	tristate "Elan eKTF2127 I2C touchscreen"
518	depends on I2C
519	help
520	  Say Y here if you have an Elan eKTF2127 touchscreen
521	  connected to your system.
522
523	  If unsure, say N.
524
525	  To compile this driver as a module, choose M here: the
526	  module will be called ektf2127.
527
528config TOUCHSCREEN_ELAN
529	tristate "Elan eKTH I2C touchscreen"
530	depends on I2C
531	help
532	  Say Y here if you have an Elan eKTH I2C touchscreen
533	  connected to your system.
534
535	  If unsure, say N.
536
537	  To compile this driver as a module, choose M here: the
538	  module will be called elants_i2c.
539
540config TOUCHSCREEN_ELO
541	tristate "Elo serial touchscreens"
542	select SERIO
543	help
544	  Say Y here if you have an Elo serial touchscreen connected to
545	  your system.
546
547	  If unsure, say N.
548
549	  To compile this driver as a module, choose M here: the
550	  module will be called elo.
551
552config TOUCHSCREEN_WACOM_W8001
553	tristate "Wacom W8001 penabled serial touchscreen"
554	select SERIO
555	help
556	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
557	  connected to your system.
558
559	  If unsure, say N.
560
561	  To compile this driver as a module, choose M here: the
562	  module will be called wacom_w8001.
563
564config TOUCHSCREEN_WACOM_I2C
565	tristate "Wacom Tablet support (I2C)"
566	depends on I2C
567	help
568	  Say Y here if you want to use the I2C version of the Wacom
569	  Pen Tablet.
570
571	  If unsure, say N.
572
573	  To compile this driver as a module, choose M here: the module
574	  will be called wacom_i2c.
575
576config TOUCHSCREEN_LPC32XX
577	tristate "LPC32XX touchscreen controller"
578	depends on ARCH_LPC32XX
579	help
580	  Say Y here if you have a LPC32XX device and want
581	  to support the built-in touchscreen.
582
583	  To compile this driver as a module, choose M here: the
584	  module will be called lpc32xx_ts.
585
586config TOUCHSCREEN_MAX11801
587	tristate "MAX11801 based touchscreens"
588	depends on I2C
589	help
590	  Say Y here if you have a MAX11801 based touchscreen
591	  controller.
592
593	  If unsure, say N.
594
595	  To compile this driver as a module, choose M here: the
596	  module will be called max11801_ts.
597
598config TOUCHSCREEN_MCS5000
599	tristate "MELFAS MCS-5000 touchscreen"
600	depends on I2C
601	help
602	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
603	  chip in your system.
604
605	  If unsure, say N.
606
607	  To compile this driver as a module, choose M here: the
608	  module will be called mcs5000_ts.
609
610config TOUCHSCREEN_MMS114
611	tristate "MELFAS MMS114 touchscreen"
612	depends on I2C
613	help
614	  Say Y here if you have the MELFAS MMS114 touchscreen controller
615	  chip in your system.
616
617	  If unsure, say N.
618
619	  To compile this driver as a module, choose M here: the
620	  module will be called mms114.
621
622config TOUCHSCREEN_MELFAS_MIP4
623	tristate "MELFAS MIP4 Touchscreen"
624	depends on I2C
625	help
626	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
627
628	  If unsure, say N.
629
630	  To compile this driver as a module, choose M here:
631	  the module will be called melfas_mip4.
632
633config TOUCHSCREEN_MSG2638
634	tristate "MStar msg2638 touchscreen support"
635	depends on I2C
636	depends on GPIOLIB || COMPILE_TEST
637	help
638	  Say Y here if you have an I2C touchscreen using MStar msg2638.
639
640	  If unsure, say N.
641
642	  To compile this driver as a module, choose M here: the
643	  module will be called msg2638.
644
645config TOUCHSCREEN_MTOUCH
646	tristate "MicroTouch serial touchscreens"
647	select SERIO
648	help
649	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
650	  your system.
651
652	  If unsure, say N.
653
654	  To compile this driver as a module, choose M here: the
655	  module will be called mtouch.
656
657config TOUCHSCREEN_IMAGIS
658	tristate "Imagis touchscreen support"
659	depends on I2C
660	help
661	  Say Y here if you have an Imagis IST30xxC touchscreen.
662	  If unsure, say N.
663
664	  To compile this driver as a module, choose M here: the
665	  module will be called imagis.
666
667config TOUCHSCREEN_IMX6UL_TSC
668	tristate "Freescale i.MX6UL touchscreen controller"
669	depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
670	help
671	  Say Y here if you have a Freescale i.MX6UL, and want to
672	  use the internal touchscreen controller.
673
674	  If unsure, say N.
675
676	  To compile this driver as a module, choose M here: the
677	  module will be called imx6ul_tsc.
678
679config TOUCHSCREEN_INEXIO
680	tristate "iNexio serial touchscreens"
681	select SERIO
682	help
683	  Say Y here if you have an iNexio serial touchscreen connected to
684	  your system.
685
686	  If unsure, say N.
687
688	  To compile this driver as a module, choose M here: the
689	  module will be called inexio.
690
691config TOUCHSCREEN_MK712
692	tristate "ICS MicroClock MK712 touchscreen"
693	help
694	  Say Y here if you have the ICS MicroClock MK712 touchscreen
695	  controller chip in your system.
696
697	  If unsure, say N.
698
699	  To compile this driver as a module, choose M here: the
700	  module will be called mk712.
701
702config TOUCHSCREEN_HP600
703	tristate "HP Jornada 6xx touchscreen"
704	depends on SH_HP6XX && SH_ADC
705	help
706	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
707	  support the built-in touchscreen.
708
709	  To compile this driver as a module, choose M here: the
710	  module will be called hp680_ts_input.
711
712config TOUCHSCREEN_HP7XX
713	tristate "HP Jornada 7xx touchscreen"
714	depends on SA1100_JORNADA720_SSP
715	help
716	  Say Y here if you have a HP Jornada 710/720/728 and want
717	  to support the built-in touchscreen.
718
719	  To compile this driver as a module, choose M here: the
720	  module will be called jornada720_ts.
721
722config TOUCHSCREEN_IPAQ_MICRO
723	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
724	depends on MFD_IPAQ_MICRO
725	help
726	  Say Y here to enable support for the touchscreen attached to
727	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
728
729	  If unsure, say N.
730
731	  To compile this driver as a module, choose M here: the
732	  module will be called ipaq-micro-ts.
733
734config TOUCHSCREEN_HTCPEN
735	tristate "HTC Shift X9500 touchscreen"
736	depends on ISA
737	help
738	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
739	  Clio / Shangrila and want to support the built-in touchscreen.
740
741	  If unsure, say N.
742
743	  To compile this driver as a module, choose M here: the
744	  module will be called htcpen.
745
746config TOUCHSCREEN_PENMOUNT
747	tristate "Penmount serial touchscreen"
748	select SERIO
749	help
750	  Say Y here if you have a Penmount serial touchscreen connected to
751	  your system.
752
753	  If unsure, say N.
754
755	  To compile this driver as a module, choose M here: the
756	  module will be called penmount.
757
758config TOUCHSCREEN_EDT_FT5X06
759	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
760	depends on I2C
761	help
762	  Say Y here if you have an EDT "Polytouch" touchscreen based
763	  on the FocalTech FT5x06 family of controllers connected to
764	  your system.
765
766	  If unsure, say N.
767
768	  To compile this driver as a module, choose M here: the
769	  module will be called edt-ft5x06.
770
771config TOUCHSCREEN_RASPBERRYPI_FW
772	tristate "Raspberry Pi's firmware base touch screen support"
773	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
774	help
775	  Say Y here if you have the official Raspberry Pi 7 inch screen on
776	  your system.
777
778	  If unsure, say N.
779
780	  To compile this driver as a module, choose M here: the
781	  module will be called raspberrypi-ts.
782
783config TOUCHSCREEN_MIGOR
784	tristate "Renesas MIGO-R touchscreen"
785	depends on (SH_MIGOR || COMPILE_TEST) && I2C
786	help
787	  Say Y here to enable MIGO-R touchscreen support.
788
789	  If unsure, say N.
790
791	  To compile this driver as a module, choose M here: the
792	  module will be called migor_ts.
793
794config TOUCHSCREEN_TOUCHRIGHT
795	tristate "Touchright serial touchscreen"
796	select SERIO
797	help
798	  Say Y here if you have a Touchright serial touchscreen connected to
799	  your system.
800
801	  If unsure, say N.
802
803	  To compile this driver as a module, choose M here: the
804	  module will be called touchright.
805
806config TOUCHSCREEN_TOUCHWIN
807	tristate "Touchwin serial touchscreen"
808	select SERIO
809	help
810	  Say Y here if you have a Touchwin serial touchscreen connected to
811	  your system.
812
813	  If unsure, say N.
814
815	  To compile this driver as a module, choose M here: the
816	  module will be called touchwin.
817
818config TOUCHSCREEN_TI_AM335X_TSC
819	tristate "TI Touchscreen Interface"
820	depends on MFD_TI_AM335X_TSCADC
821	help
822	  Say Y here if you have 4/5/8 wire touchscreen controller
823	  to be connected to the ADC controller on your TI AM335x SoC.
824
825	  If unsure, say N.
826
827	  To compile this driver as a module, choose M here: the
828	  module will be called ti_am335x_tsc.
829
830config TOUCHSCREEN_PIXCIR
831	tristate "PIXCIR I2C touchscreens"
832	depends on I2C
833	help
834	  Say Y here if you have a pixcir i2c touchscreen
835	  controller.
836
837	  If unsure, say N.
838
839	  To compile this driver as a module, choose M here: the
840	  module will be called pixcir_i2c_ts.
841
842config TOUCHSCREEN_WDT87XX_I2C
843	tristate "Weida HiTech I2C touchscreen"
844	depends on I2C
845	help
846	  Say Y here if you have a Weida WDT87XX I2C touchscreen
847	  connected to your system.
848
849	  If unsure, say N.
850
851	  To compile this driver as a module, choose M here: the
852	  module will be called wdt87xx_i2c.
853
854config TOUCHSCREEN_WM831X
855	tristate "Support for WM831x touchscreen controllers"
856	depends on MFD_WM831X
857	help
858	  This enables support for the touchscreen controller on the WM831x
859	  series of PMICs.
860
861	  To compile this driver as a module, choose M here: the
862	  module will be called wm831x-ts.
863
864config TOUCHSCREEN_WM97XX
865	tristate "Support for WM97xx AC97 touchscreen controllers"
866	depends on AC97_BUS || AC97_BUS_NEW
867	help
868	  Say Y here if you have a Wolfson Microelectronics WM97xx
869	  touchscreen connected to your system. Note that this option
870	  only enables core driver, you will also need to select
871	  support for appropriate chip below.
872
873	  If unsure, say N.
874
875	  To compile this driver as a module, choose M here: the
876	  module will be called wm97xx-ts.
877
878config TOUCHSCREEN_WM9705
879	bool "WM9705 Touchscreen interface support"
880	depends on TOUCHSCREEN_WM97XX
881	default y
882	help
883	  Say Y here to enable support for the Wolfson Microelectronics
884	  WM9705 touchscreen controller.
885
886config TOUCHSCREEN_WM9712
887	bool "WM9712 Touchscreen interface support"
888	depends on TOUCHSCREEN_WM97XX
889	default y
890	help
891	  Say Y here to enable support for the Wolfson Microelectronics
892	  WM9712 touchscreen controller.
893
894config TOUCHSCREEN_WM9713
895	bool "WM9713 Touchscreen interface support"
896	depends on TOUCHSCREEN_WM97XX
897	default y
898	help
899	  Say Y here to enable support for the Wolfson Microelectronics
900	  WM9713 touchscreen controller.
901
902config TOUCHSCREEN_WM97XX_MAINSTONE
903	tristate "WM97xx Mainstone/Palm accelerated touch"
904	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
905	depends on SND_PXA2XX_LIB_AC97
906	help
907	  Say Y here for support for streaming mode with WM97xx touchscreens
908	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
909
910	  If unsure, say N.
911
912	  To compile this driver as a module, choose M here: the
913	  module will be called mainstone-wm97xx.
914
915config TOUCHSCREEN_USB_COMPOSITE
916	tristate "USB Touchscreen Driver"
917	depends on USB_ARCH_HAS_HCD
918	select USB
919	help
920	  USB Touchscreen driver for:
921	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
922	  - PanJit TouchSet USB
923	  - 3M MicroTouch USB (EX II series)
924	  - ITM
925	  - some other eTurboTouch
926	  - Gunze AHL61
927	  - DMC TSC-10/25
928	  - IRTOUCHSYSTEMS/UNITOP
929	  - IdealTEK URTC1000
930	  - GoTop Super_Q2/GogoPen/PenPower tablets
931	  - JASTEC USB Touch Controller/DigiTech DTR-02U
932	  - Zytronic controllers
933	  - Elo TouchSystems 2700 IntelliTouch
934	  - EasyTouch USB Touch Controller from Data Module
935	  - e2i (Mimo monitors)
936
937	  Have a look at <http://linux.chapter7.ch/touchkit/> for
938	  a usage description and the required user-space stuff.
939
940	  To compile this driver as a module, choose M here: the
941	  module will be called usbtouchscreen.
942
943config TOUCHSCREEN_MXS_LRADC
944	tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
945	depends on MFD_MXS_LRADC
946	help
947	  Say Y here if you have a touchscreen connected to the low-resolution
948	  analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
949
950	  To compile this driver as a module, choose M here: the module will be
951	  called mxs-lradc-ts.
952
953config TOUCHSCREEN_MX25
954	tristate "Freescale i.MX25 touchscreen input driver"
955	depends on MFD_MX25_TSADC
956	help
957	  Enable support for touchscreen connected to your i.MX25.
958
959	  To compile this driver as a module, choose M here: the
960	  module will be called fsl-imx25-tcq.
961
962config TOUCHSCREEN_MC13783
963	tristate "Freescale MC13783 touchscreen input driver"
964	depends on MFD_MC13XXX
965	help
966	  Say Y here if you have an Freescale MC13783 PMIC on your
967	  board and want to use its touchscreen
968
969	  If unsure, say N.
970
971	  To compile this driver as a module, choose M here: the
972	  module will be called mc13783_ts.
973
974config TOUCHSCREEN_USB_EGALAX
975	default y
976	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
977	depends on TOUCHSCREEN_USB_COMPOSITE
978
979config TOUCHSCREEN_USB_PANJIT
980	default y
981	bool "PanJit device support" if EXPERT
982	depends on TOUCHSCREEN_USB_COMPOSITE
983
984config TOUCHSCREEN_USB_3M
985	default y
986	bool "3M/Microtouch EX II series device support" if EXPERT
987	depends on TOUCHSCREEN_USB_COMPOSITE
988
989config TOUCHSCREEN_USB_ITM
990	default y
991	bool "ITM device support" if EXPERT
992	depends on TOUCHSCREEN_USB_COMPOSITE
993
994config TOUCHSCREEN_USB_ETURBO
995	default y
996	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
997	depends on TOUCHSCREEN_USB_COMPOSITE
998
999config TOUCHSCREEN_USB_GUNZE
1000	default y
1001	bool "Gunze AHL61 device support" if EXPERT
1002	depends on TOUCHSCREEN_USB_COMPOSITE
1003
1004config TOUCHSCREEN_USB_DMC_TSC10
1005	default y
1006	bool "DMC TSC-10/25 device support" if EXPERT
1007	depends on TOUCHSCREEN_USB_COMPOSITE
1008
1009config TOUCHSCREEN_USB_IRTOUCH
1010	default y
1011	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1012	depends on TOUCHSCREEN_USB_COMPOSITE
1013
1014config TOUCHSCREEN_USB_IDEALTEK
1015	default y
1016	bool "IdealTEK URTC1000 device support" if EXPERT
1017	depends on TOUCHSCREEN_USB_COMPOSITE
1018
1019config TOUCHSCREEN_USB_GENERAL_TOUCH
1020	default y
1021	bool "GeneralTouch Touchscreen device support" if EXPERT
1022	depends on TOUCHSCREEN_USB_COMPOSITE
1023
1024config TOUCHSCREEN_USB_GOTOP
1025	default y
1026	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1027	depends on TOUCHSCREEN_USB_COMPOSITE
1028
1029config TOUCHSCREEN_USB_JASTEC
1030	default y
1031	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1032	depends on TOUCHSCREEN_USB_COMPOSITE
1033
1034config TOUCHSCREEN_USB_ELO
1035	default y
1036	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1037	depends on TOUCHSCREEN_USB_COMPOSITE
1038
1039config TOUCHSCREEN_USB_E2I
1040	default y
1041	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1042	depends on TOUCHSCREEN_USB_COMPOSITE
1043
1044config TOUCHSCREEN_USB_ZYTRONIC
1045	default y
1046	bool "Zytronic controller" if EXPERT
1047	depends on TOUCHSCREEN_USB_COMPOSITE
1048
1049config TOUCHSCREEN_USB_ETT_TC45USB
1050	default y
1051	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1052	depends on TOUCHSCREEN_USB_COMPOSITE
1053
1054config TOUCHSCREEN_USB_NEXIO
1055	default y
1056	bool "NEXIO/iNexio device support" if EXPERT
1057	depends on TOUCHSCREEN_USB_COMPOSITE
1058
1059config TOUCHSCREEN_USB_EASYTOUCH
1060	default y
1061	bool "EasyTouch USB Touch controller device support" if EXPERT
1062	depends on TOUCHSCREEN_USB_COMPOSITE
1063	help
1064	  Say Y here if you have an EasyTouch USB Touch controller.
1065	  If unsure, say N.
1066
1067config TOUCHSCREEN_TOUCHIT213
1068	tristate "Sahara TouchIT-213 touchscreen"
1069	select SERIO
1070	help
1071	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1072
1073	  If unsure, say N.
1074
1075	  To compile this driver as a module, choose M here: the
1076	  module will be called touchit213.
1077
1078config TOUCHSCREEN_TS4800
1079	tristate "TS-4800 touchscreen"
1080	depends on HAS_IOMEM && OF
1081	depends on SOC_IMX51 || COMPILE_TEST
1082	select MFD_SYSCON
1083	help
1084	  Say Y here if you have a touchscreen on a TS-4800 board.
1085
1086	  On TS-4800, the touchscreen is not handled directly by Linux but by
1087	  a companion FPGA.
1088
1089	  If unsure, say N.
1090
1091	  To compile this driver as a module, choose M here: the
1092	  module will be called ts4800_ts.
1093
1094config TOUCHSCREEN_TSC_SERIO
1095	tristate "TSC-10/25/40 serial touchscreen support"
1096	select SERIO
1097	help
1098	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1099	  to your system.
1100
1101	  If unsure, say N.
1102
1103	  To compile this driver as a module, choose M here: the
1104	  module will be called tsc40.
1105
1106config TOUCHSCREEN_TSC200X_CORE
1107	tristate
1108
1109config TOUCHSCREEN_TSC2004
1110	tristate "TSC2004 based touchscreens"
1111	depends on I2C
1112	select REGMAP_I2C
1113	select TOUCHSCREEN_TSC200X_CORE
1114	help
1115	  Say Y here if you have a TSC2004 based touchscreen.
1116
1117	  If unsure, say N.
1118
1119	  To compile this driver as a module, choose M here: the
1120	  module will be called tsc2004.
1121
1122config TOUCHSCREEN_TSC2005
1123	tristate "TSC2005 based touchscreens"
1124	depends on SPI_MASTER
1125	select REGMAP_SPI
1126	select TOUCHSCREEN_TSC200X_CORE
1127	help
1128	  Say Y here if you have a TSC2005 based touchscreen.
1129
1130	  If unsure, say N.
1131
1132	  To compile this driver as a module, choose M here: the
1133	  module will be called tsc2005.
1134
1135config TOUCHSCREEN_TSC2007
1136	tristate "TSC2007 based touchscreens"
1137	depends on I2C
1138	help
1139	  Say Y here if you have a TSC2007 based touchscreen.
1140
1141	  If unsure, say N.
1142
1143	  To compile this driver as a module, choose M here: the
1144	  module will be called tsc2007.
1145
1146config TOUCHSCREEN_TSC2007_IIO
1147	bool "IIO interface for external ADC input and temperature"
1148	depends on TOUCHSCREEN_TSC2007
1149	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1150	help
1151	  Saying Y here adds an iio interface to the tsc2007 which
1152	  provides values for the AUX input (used for e.g. battery
1153	  or ambient light monitoring), temperature and raw input
1154	  values.
1155
1156config TOUCHSCREEN_PCAP
1157	tristate "Motorola PCAP touchscreen"
1158	depends on EZX_PCAP
1159	help
1160	  Say Y here if you have a Motorola EZX telephone and
1161	  want to enable support for the built-in touchscreen.
1162
1163	  To compile this driver as a module, choose M here: the
1164	  module will be called pcap_ts.
1165
1166config TOUCHSCREEN_RM_TS
1167	tristate "Raydium I2C Touchscreen"
1168	depends on I2C
1169	depends on GPIOLIB || COMPILE_TEST
1170	help
1171	  Say Y here if you have Raydium series I2C touchscreen,
1172	  such as RM32380, connected to your system.
1173
1174	  If unsure, say N.
1175
1176	  To compile this driver as a module, choose M here: the
1177	  module will be called raydium_i2c_ts.
1178
1179config TOUCHSCREEN_SILEAD
1180	tristate "Silead I2C touchscreen"
1181	depends on I2C
1182	help
1183	  Say Y here if you have the Silead touchscreen connected to
1184	  your system.
1185
1186	  If unsure, say N.
1187
1188	  To compile this driver as a module, choose M here: the
1189	  module will be called silead.
1190
1191config TOUCHSCREEN_SIS_I2C
1192	tristate "SiS 9200 family I2C touchscreen"
1193	depends on I2C
1194	select CRC_ITU_T
1195	depends on GPIOLIB || COMPILE_TEST
1196	help
1197	  This enables support for SiS 9200 family over I2C based touchscreens.
1198
1199	  If unsure, say N.
1200
1201	  To compile this driver as a module, choose M here: the
1202	  module will be called sis_i2c.
1203
1204config TOUCHSCREEN_ST1232
1205	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1206	depends on I2C
1207	help
1208	  Say Y here if you want to support the Sitronix ST1232
1209	  or ST1633 touchscreen controller.
1210
1211	  If unsure, say N.
1212
1213	  To compile this driver as a module, choose M here: the
1214	  module will be called st1232_ts.
1215
1216config TOUCHSCREEN_STMFTS
1217	tristate "STMicroelectronics STMFTS touchscreen"
1218	depends on I2C
1219	depends on LEDS_CLASS
1220	help
1221	  Say Y here if you want support for STMicroelectronics
1222	  STMFTS touchscreen.
1223
1224	  To compile this driver as a module, choose M here: the
1225	  module will be called stmfts.
1226
1227config TOUCHSCREEN_STMPE
1228	tristate "STMicroelectronics STMPE touchscreens"
1229	depends on MFD_STMPE
1230	depends on OF
1231	help
1232	  Say Y here if you want support for STMicroelectronics
1233	  STMPE touchscreen controllers.
1234
1235	  To compile this driver as a module, choose M here: the
1236	  module will be called stmpe-ts.
1237
1238config TOUCHSCREEN_SUN4I
1239	tristate "Allwinner sun4i resistive touchscreen controller support"
1240	depends on ARCH_SUNXI || COMPILE_TEST
1241	depends on HWMON
1242	depends on THERMAL || !THERMAL_OF
1243	help
1244	  This selects support for the resistive touchscreen controller
1245	  found on Allwinner sunxi SoCs.
1246
1247	  To compile this driver as a module, choose M here: the
1248	  module will be called sun4i-ts.
1249
1250config TOUCHSCREEN_SUR40
1251	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1252	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1253	depends on VIDEO_DEV
1254	select VIDEOBUF2_DMA_SG
1255	help
1256	  Say Y here if you want support for the Samsung SUR40 touchscreen
1257	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1258
1259	  To compile this driver as a module, choose M here: the
1260	  module will be called sur40.
1261
1262config TOUCHSCREEN_SURFACE3_SPI
1263	tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1264	depends on SPI
1265	depends on GPIOLIB || COMPILE_TEST
1266	help
1267	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1268	  controller chip as found on the Surface 3 in your system.
1269
1270	  If unsure, say N.
1271
1272	  To compile this driver as a module, choose M here: the
1273	  module will be called surface3_spi.
1274
1275config TOUCHSCREEN_SX8654
1276	tristate "Semtech SX8654 touchscreen"
1277	depends on I2C
1278	help
1279	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1280
1281	  If unsure, say N
1282
1283	  To compile this driver as a module, choose M here: the
1284	  module will be called sx8654.
1285
1286config TOUCHSCREEN_TPS6507X
1287	tristate "TPS6507x based touchscreens"
1288	depends on I2C
1289	help
1290	  Say Y here if you have a TPS6507x based touchscreen
1291	  controller.
1292
1293	  If unsure, say N.
1294
1295	  To compile this driver as a module, choose M here: the
1296	  module will be called tps6507x_ts.
1297
1298config TOUCHSCREEN_ZET6223
1299	tristate "Zeitec ZET6223 touchscreen driver"
1300	depends on I2C
1301	help
1302	  Say Y here if you have a touchscreen using Zeitec ZET6223
1303
1304	  If unsure, say N.
1305
1306	  To compile this driver as a module, choose M here: the
1307	  module will be called zet6223.
1308
1309config TOUCHSCREEN_ZFORCE
1310	tristate "Neonode zForce infrared touchscreens"
1311	depends on I2C
1312	depends on GPIOLIB || COMPILE_TEST
1313	help
1314	  Say Y here if you have a touchscreen using the zforce
1315	  infraread technology from Neonode.
1316
1317	  If unsure, say N.
1318
1319	  To compile this driver as a module, choose M here: the
1320	  module will be called zforce_ts.
1321
1322config TOUCHSCREEN_COLIBRI_VF50
1323	tristate "Toradex Colibri on board touchscreen driver"
1324	depends on IIO
1325	depends on GPIOLIB || COMPILE_TEST
1326	help
1327	  Say Y here if you have a Colibri VF50 and plan to use
1328	  the on-board provided 4-wire touchscreen driver.
1329
1330	  If unsure, say N.
1331
1332	  To compile this driver as a module, choose M here: the
1333	  module will be called colibri_vf50_ts.
1334
1335config TOUCHSCREEN_ROHM_BU21023
1336	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1337	depends on I2C
1338	help
1339	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1340
1341	  If unsure, say N.
1342
1343	  To compile this driver as a module, choose M here: the
1344	  module will be called bu21023_ts.
1345
1346config TOUCHSCREEN_IQS5XX
1347	tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1348	depends on I2C
1349	help
1350	  Say Y to enable support for the Azoteq IQS550/572/525
1351	  family of trackpad/touchscreen controllers.
1352
1353	  To compile this driver as a module, choose M here: the
1354	  module will be called iqs5xx.
1355
1356config TOUCHSCREEN_ZINITIX
1357	tristate "Zinitix touchscreen support"
1358	depends on I2C
1359	help
1360	  Say Y here if you have a touchscreen using Zinitix bt541,
1361	  or something similar enough.
1362
1363	  If unsure, say N.
1364
1365	  To compile this driver as a module, choose M here: the
1366	  module will be called zinitix.
1367
1368config TOUCHSCREEN_HIMAX_HX83112B
1369	tristate "Himax hx83112b touchscreen driver"
1370	depends on I2C
1371	select REGMAP_I2C
1372	help
1373	  Say Y here to enable support for Himax hx83112b touchscreens.
1374
1375	  If unsure, say N.
1376
1377	  To compile this driver as a module, choose M here: the
1378	  module will be called himax_hx83112b.
1379
1380endif
1381