1 /* 2 * @brief LPC15xx USB device register block 3 * 4 * @note 5 * Copyright(C) NXP Semiconductors, 2013 6 * All rights reserved. 7 * 8 * @par 9 * Software that is described herein is for illustrative purposes only 10 * which provides customers with programming information regarding the 11 * LPC products. This software is supplied "AS IS" without any warranties of 12 * any kind, and NXP Semiconductors and its licensor disclaim any and 13 * all warranties, express or implied, including all implied warranties of 14 * merchantability, fitness for a particular purpose and non-infringement of 15 * intellectual property rights. NXP Semiconductors assumes no responsibility 16 * or liability for the use of the software, conveys no license or rights under any 17 * patent, copyright, mask work right, or any other intellectual property rights in 18 * or to any products. NXP Semiconductors reserves the right to make changes 19 * in the software without notification. NXP Semiconductors also makes no 20 * representation or warranty that such application will be suitable for the 21 * specified use without further testing or modification. 22 * 23 * @par 24 * Permission to use, copy, modify, and distribute this software and its 25 * documentation is hereby granted, under NXP Semiconductors' and its 26 * licensor's relevant copyrights in the software, without fee, provided that it 27 * is used in conjunction with NXP Semiconductors microcontrollers. This 28 * copyright, permission, and disclaimer notice must appear in all copies of 29 * this code. 30 */ 31 32 #ifndef __USBD_15XX_H_ 33 #define __USBD_15XX_H_ 34 35 #ifdef __cplusplus 36 extern "C" { 37 #endif 38 39 /** @defgroup USBD_15XX CHIP: LPC15xx USB Device driver 40 * @ingroup CHIP_15XX_Drivers 41 * @{ 42 */ 43 44 /** 45 * @brief USB device register block structure 46 */ 47 typedef struct { /*!< USB Structure */ 48 __IO uint32_t DEVCMDSTAT; /*!< USB Device Command/Status register */ 49 __IO uint32_t _INFO; /*!< USB Info register */ 50 __IO uint32_t EPLISTSTART; /*!< USB EP Command/Status List start address */ 51 __IO uint32_t DATABUFSTART; /*!< USB Data buffer start address */ 52 __IO uint32_t LPM; /*!< Link Power Management register */ 53 __IO uint32_t EPSKIP; /*!< USB Endpoint skip */ 54 __IO uint32_t EPINUSE; /*!< USB Endpoint Buffer in use */ 55 __IO uint32_t EPBUFCFG; /*!< USB Endpoint Buffer Configuration register */ 56 __IO uint32_t INTSTAT; /*!< USB interrupt status register */ 57 __IO uint32_t INTEN; /*!< USB interrupt enable register */ 58 __IO uint32_t INTSETSTAT; /*!< USB set interrupt status register */ 59 __IO uint32_t INTROUTING; /*!< USB interrupt routing register */ 60 __I uint32_t RESERVED0[1]; 61 __I uint32_t EPTOGGLE; /*!< USB Endpoint toggle register */ 62 } LPC_USB_T; 63 64 /** 65 * @} 66 */ 67 68 #ifdef __cplusplus 69 } 70 #endif 71 72 #endif /* __USBD_15XX_H_ */ 73