1 /*
2  * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  */
6 #ifndef PLAT_ARM_H
7 #define PLAT_ARM_H
8 
9 #include <stdbool.h>
10 #include <stdint.h>
11 
12 #include <drivers/arm/tzc_common.h>
13 #include <lib/bakery_lock.h>
14 #include <lib/cassert.h>
15 #include <lib/el3_runtime/cpu_data.h>
16 #include <lib/spinlock.h>
17 #include <lib/utils_def.h>
18 #include <lib/xlat_tables/xlat_tables_compat.h>
19 
20 /*******************************************************************************
21  * Forward declarations
22  ******************************************************************************/
23 struct meminfo;
24 struct image_info;
25 struct bl_params;
26 
27 typedef struct arm_tzc_regions_info {
28 	unsigned long long base;
29 	unsigned long long end;
30 	unsigned int sec_attr;
31 	unsigned int nsaid_permissions;
32 } arm_tzc_regions_info_t;
33 
34 /*******************************************************************************
35  * Default mapping definition of the TrustZone Controller for ARM standard
36  * platforms.
37  * Configure:
38  *   - Region 0 with no access;
39  *   - Region 1 with secure access only;
40  *   - the remaining DRAM regions access from the given Non-Secure masters.
41  ******************************************************************************/
42 #if SPM_MM
43 #define ARM_TZC_REGIONS_DEF						\
44 	{ARM_AP_TZC_DRAM1_BASE, ARM_EL3_TZC_DRAM1_END + ARM_L1_GPT_SIZE,\
45 		TZC_REGION_S_RDWR, 0},					\
46 	{ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS, \
47 		PLAT_ARM_TZC_NS_DEV_ACCESS}, 				\
48 	{ARM_DRAM2_BASE, ARM_DRAM2_END, ARM_TZC_NS_DRAM_S_ACCESS,	\
49 		PLAT_ARM_TZC_NS_DEV_ACCESS},				\
50 	{PLAT_SP_IMAGE_NS_BUF_BASE, (PLAT_SP_IMAGE_NS_BUF_BASE +	\
51 		PLAT_SP_IMAGE_NS_BUF_SIZE) - 1, TZC_REGION_S_NONE,	\
52 		PLAT_ARM_TZC_NS_DEV_ACCESS}
53 
54 #elif ENABLE_RME
55 #define ARM_TZC_REGIONS_DEF						    \
56 	{ARM_AP_TZC_DRAM1_BASE, ARM_AP_TZC_DRAM1_END, TZC_REGION_S_RDWR, 0},\
57 	{ARM_EL3_TZC_DRAM1_BASE, ARM_L1_GPT_END, TZC_REGION_S_RDWR, 0},	    \
58 	{ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS,	    \
59 		PLAT_ARM_TZC_NS_DEV_ACCESS},				    \
60 	/* Realm and Shared area share the same PAS */		    \
61 	{ARM_REALM_BASE, ARM_EL3_RMM_SHARED_END, ARM_TZC_NS_DRAM_S_ACCESS,  \
62 		PLAT_ARM_TZC_NS_DEV_ACCESS},				    \
63 	{ARM_DRAM2_BASE, ARM_DRAM2_END, ARM_TZC_NS_DRAM_S_ACCESS,	    \
64 		PLAT_ARM_TZC_NS_DEV_ACCESS}
65 
66 #else
67 #define ARM_TZC_REGIONS_DEF						\
68 	{ARM_AP_TZC_DRAM1_BASE, ARM_EL3_TZC_DRAM1_END + ARM_L1_GPT_SIZE,\
69 		TZC_REGION_S_RDWR, 0},					\
70 	{ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_END, ARM_TZC_NS_DRAM_S_ACCESS, \
71 		PLAT_ARM_TZC_NS_DEV_ACCESS},	 			\
72 	{ARM_DRAM2_BASE, ARM_DRAM2_END, ARM_TZC_NS_DRAM_S_ACCESS,	\
73 		PLAT_ARM_TZC_NS_DEV_ACCESS}
74 #endif
75 
76 #define ARM_CASSERT_MMAP						  \
77 	CASSERT((ARRAY_SIZE(plat_arm_mmap) - 1) <= PLAT_ARM_MMAP_ENTRIES, \
78 		assert_plat_arm_mmap_mismatch);				  \
79 	CASSERT((PLAT_ARM_MMAP_ENTRIES + ARM_BL_REGIONS)		  \
80 		<= MAX_MMAP_REGIONS,					  \
81 		assert_max_mmap_regions);
82 
83 void arm_setup_romlib(void);
84 
85 #if defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32))
86 /*
87  * Use this macro to instantiate lock before it is used in below
88  * arm_lock_xxx() macros
89  */
90 #define ARM_INSTANTIATE_LOCK	static DEFINE_BAKERY_LOCK(arm_lock)
91 #define ARM_LOCK_GET_INSTANCE	(&arm_lock)
92 
93 #if !HW_ASSISTED_COHERENCY
94 #define ARM_SCMI_INSTANTIATE_LOCK	DEFINE_BAKERY_LOCK(arm_scmi_lock)
95 #else
96 #define ARM_SCMI_INSTANTIATE_LOCK	spinlock_t arm_scmi_lock
97 #endif
98 #define ARM_SCMI_LOCK_GET_INSTANCE	(&arm_scmi_lock)
99 
100 /*
101  * These are wrapper macros to the Coherent Memory Bakery Lock API.
102  */
103 #define arm_lock_init()		bakery_lock_init(&arm_lock)
104 #define arm_lock_get()		bakery_lock_get(&arm_lock)
105 #define arm_lock_release()	bakery_lock_release(&arm_lock)
106 
107 #else
108 
109 /*
110  * Empty macros for all other BL stages other than BL31 and BL32
111  */
112 #define ARM_INSTANTIATE_LOCK	static int arm_lock __unused
113 #define ARM_LOCK_GET_INSTANCE	0
114 #define arm_lock_init()
115 #define arm_lock_get()
116 #define arm_lock_release()
117 
118 #endif /* defined(IMAGE_BL31) || (!defined(__aarch64__) && defined(IMAGE_BL32)) */
119 
120 #if ARM_RECOM_STATE_ID_ENC
121 /*
122  * Macros used to parse state information from State-ID if it is using the
123  * recommended encoding for State-ID.
124  */
125 #define ARM_LOCAL_PSTATE_WIDTH		4
126 #define ARM_LOCAL_PSTATE_MASK		((1 << ARM_LOCAL_PSTATE_WIDTH) - 1)
127 
128 /* Macros to construct the composite power state */
129 
130 /* Make composite power state parameter till power level 0 */
131 #if PSCI_EXTENDED_STATE_ID
132 
133 #define arm_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
134 		(((lvl0_state) << PSTATE_ID_SHIFT) | ((type) << PSTATE_TYPE_SHIFT))
135 #else
136 #define arm_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
137 		(((lvl0_state) << PSTATE_ID_SHIFT) | \
138 		((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
139 		((type) << PSTATE_TYPE_SHIFT))
140 #endif /* __PSCI_EXTENDED_STATE_ID__ */
141 
142 /* Make composite power state parameter till power level 1 */
143 #define arm_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
144 		(((lvl1_state) << ARM_LOCAL_PSTATE_WIDTH) | \
145 		arm_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
146 
147 /* Make composite power state parameter till power level 2 */
148 #define arm_make_pwrstate_lvl2(lvl2_state, lvl1_state, lvl0_state, pwr_lvl, type) \
149 		(((lvl2_state) << (ARM_LOCAL_PSTATE_WIDTH * 2)) | \
150 		arm_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type))
151 
152 #endif /* __ARM_RECOM_STATE_ID_ENC__ */
153 
154 /* ARM State switch error codes */
155 #define STATE_SW_E_PARAM		(-2)
156 #define STATE_SW_E_DENIED		(-3)
157 
158 /* plat_get_rotpk_info() flags */
159 #define ARM_ROTPK_REGS_ID		1
160 #define ARM_ROTPK_DEVEL_RSA_ID		2
161 #define ARM_ROTPK_DEVEL_ECDSA_ID	3
162 
163 
164 /* IO storage utility functions */
165 int arm_io_setup(void);
166 
167 /* Set image specification in IO block policy */
168 int arm_set_image_source(unsigned int image_id, const char *part_name,
169 			 uintptr_t *dev_handle, uintptr_t *image_spec);
170 void arm_set_fip_addr(uint32_t active_fw_bank_idx);
171 
172 /* Security utility functions */
173 void arm_tzc400_setup(uintptr_t tzc_base,
174 			const arm_tzc_regions_info_t *tzc_regions);
175 struct tzc_dmc500_driver_data;
176 void arm_tzc_dmc500_setup(struct tzc_dmc500_driver_data *plat_driver_data,
177 			const arm_tzc_regions_info_t *tzc_regions);
178 
179 /* Console utility functions */
180 void arm_console_boot_init(void);
181 void arm_console_boot_end(void);
182 void arm_console_runtime_init(void);
183 void arm_console_runtime_end(void);
184 
185 /* Systimer utility function */
186 void arm_configure_sys_timer(void);
187 
188 /* PM utility functions */
189 int arm_validate_power_state(unsigned int power_state,
190 			    psci_power_state_t *req_state);
191 int arm_validate_psci_entrypoint(uintptr_t entrypoint);
192 int arm_validate_ns_entrypoint(uintptr_t entrypoint);
193 void arm_system_pwr_domain_save(void);
194 void arm_system_pwr_domain_resume(void);
195 int arm_psci_read_mem_protect(int *enabled);
196 int arm_nor_psci_write_mem_protect(int val);
197 void arm_nor_psci_do_static_mem_protect(void);
198 void arm_nor_psci_do_dyn_mem_protect(void);
199 int arm_psci_mem_protect_chk(uintptr_t base, u_register_t length);
200 
201 /* Topology utility function */
202 int arm_check_mpidr(u_register_t mpidr);
203 
204 /* BL1 utility functions */
205 void arm_bl1_early_platform_setup(void);
206 void arm_bl1_platform_setup(void);
207 void arm_bl1_plat_arch_setup(void);
208 
209 /* BL2 utility functions */
210 void arm_bl2_early_platform_setup(uintptr_t fw_config, struct meminfo *mem_layout);
211 void arm_bl2_platform_setup(void);
212 void arm_bl2_plat_arch_setup(void);
213 uint32_t arm_get_spsr_for_bl32_entry(void);
214 uint32_t arm_get_spsr_for_bl33_entry(void);
215 int arm_bl2_plat_handle_post_image_load(unsigned int image_id);
216 int arm_bl2_handle_post_image_load(unsigned int image_id);
217 struct bl_params *arm_get_next_bl_params(void);
218 
219 /* BL2 at EL3 functions */
220 void arm_bl2_el3_early_platform_setup(void);
221 void arm_bl2_el3_plat_arch_setup(void);
222 
223 /* BL2U utility functions */
224 void arm_bl2u_early_platform_setup(struct meminfo *mem_layout,
225 				void *plat_info);
226 void arm_bl2u_platform_setup(void);
227 void arm_bl2u_plat_arch_setup(void);
228 
229 /* BL31 utility functions */
230 void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
231 				uintptr_t hw_config, void *plat_params_from_bl2);
232 void arm_bl31_platform_setup(void);
233 void arm_bl31_plat_runtime_setup(void);
234 void arm_bl31_plat_arch_setup(void);
235 
236 /* TSP utility functions */
237 void arm_tsp_early_platform_setup(void);
238 
239 /* SP_MIN utility functions */
240 void arm_sp_min_early_platform_setup(void *from_bl2, uintptr_t tos_fw_config,
241 				uintptr_t hw_config, void *plat_params_from_bl2);
242 void arm_sp_min_plat_runtime_setup(void);
243 void arm_sp_min_plat_arch_setup(void);
244 
245 /* FIP TOC validity check */
246 bool arm_io_is_toc_valid(void);
247 
248 /* Utility functions for Dynamic Config */
249 void arm_bl2_dyn_cfg_init(void);
250 void arm_bl1_set_mbedtls_heap(void);
251 int arm_get_mbedtls_heap(void **heap_addr, size_t *heap_size);
252 
253 #if MEASURED_BOOT
254 int arm_set_tos_fw_info(uintptr_t log_addr, size_t log_size);
255 int arm_set_nt_fw_info(
256 /*
257  * Currently OP-TEE does not support reading DTBs from Secure memory
258  * and this option should be removed when feature is supported.
259  */
260 #ifdef SPD_opteed
261 			uintptr_t log_addr,
262 #endif
263 			size_t log_size, uintptr_t *ns_log_addr);
264 int arm_set_tb_fw_info(uintptr_t log_addr, size_t log_size);
265 int arm_get_tb_fw_info(uint64_t *log_addr, size_t *log_size);
266 #endif /* MEASURED_BOOT */
267 
268 /*
269  * Free the memory storing initialization code only used during an images boot
270  * time so it can be reclaimed for runtime data
271  */
272 void arm_free_init_memory(void);
273 
274 /*
275  * Make the higher level translation tables read-only
276  */
277 void arm_xlat_make_tables_readonly(void);
278 
279 /*
280  * Mandatory functions required in ARM standard platforms
281  */
282 unsigned int plat_arm_get_cluster_core_count(u_register_t mpidr);
283 void plat_arm_gic_driver_init(void);
284 void plat_arm_gic_init(void);
285 void plat_arm_gic_cpuif_enable(void);
286 void plat_arm_gic_cpuif_disable(void);
287 void plat_arm_gic_redistif_on(void);
288 void plat_arm_gic_redistif_off(void);
289 void plat_arm_gic_pcpu_init(void);
290 void plat_arm_gic_save(void);
291 void plat_arm_gic_resume(void);
292 void plat_arm_security_setup(void);
293 void plat_arm_pwrc_setup(void);
294 void plat_arm_interconnect_init(void);
295 void plat_arm_interconnect_enter_coherency(void);
296 void plat_arm_interconnect_exit_coherency(void);
297 void plat_arm_program_trusted_mailbox(uintptr_t address);
298 bool plat_arm_bl1_fwu_needed(void);
299 __dead2 void plat_arm_error_handler(int err);
300 __dead2 void plat_arm_system_reset(void);
301 
302 /*
303  * Optional functions in ARM standard platforms
304  */
305 void plat_arm_override_gicr_frames(const uintptr_t *plat_gicr_frames);
306 int arm_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
307 	unsigned int *flags);
308 int arm_get_rotpk_info_regs(void **key_ptr, unsigned int *key_len,
309 	unsigned int *flags);
310 int arm_get_rotpk_info_cc(void **key_ptr, unsigned int *key_len,
311 	unsigned int *flags);
312 int arm_get_rotpk_info_dev(void **key_ptr, unsigned int *key_len,
313 	unsigned int *flags);
314 
315 #if ARM_PLAT_MT
316 unsigned int plat_arm_get_cpu_pe_count(u_register_t mpidr);
317 #endif
318 
319 /*
320  * This function is called after loading SCP_BL2 image and it is used to perform
321  * any platform-specific actions required to handle the SCP firmware.
322  */
323 int plat_arm_bl2_handle_scp_bl2(struct image_info *scp_bl2_image_info);
324 
325 /*
326  * Optional functions required in ARM standard platforms
327  */
328 void plat_arm_io_setup(void);
329 int plat_arm_get_alt_image_source(
330 	unsigned int image_id,
331 	uintptr_t *dev_handle,
332 	uintptr_t *image_spec);
333 unsigned int plat_arm_calc_core_pos(u_register_t mpidr);
334 const mmap_region_t *plat_arm_get_mmap(void);
335 
336 /* Allow platform to override psci_pm_ops during runtime */
337 const plat_psci_ops_t *plat_arm_psci_override_pm_ops(plat_psci_ops_t *ops);
338 
339 /* Execution state switch in ARM platforms */
340 int arm_execution_state_switch(unsigned int smc_fid,
341 		uint32_t pc_hi,
342 		uint32_t pc_lo,
343 		uint32_t cookie_hi,
344 		uint32_t cookie_lo,
345 		void *handle);
346 
347 /* Optional functions for SP_MIN */
348 void plat_arm_sp_min_early_platform_setup(u_register_t arg0, u_register_t arg1,
349 			u_register_t arg2, u_register_t arg3);
350 
351 /* global variables */
352 extern plat_psci_ops_t plat_arm_psci_pm_ops;
353 extern const mmap_region_t plat_arm_mmap[];
354 extern const unsigned int arm_pm_idle_states[];
355 
356 /* secure watchdog */
357 void plat_arm_secure_wdt_start(void);
358 void plat_arm_secure_wdt_stop(void);
359 
360 /* Get SOC-ID of ARM platform */
361 uint32_t plat_arm_get_soc_id(void);
362 
363 #endif /* PLAT_ARM_H */
364