1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2015-2017 Broadcom
4 */
5
6 #include "bcm-phy-lib.h"
7 #include <linux/bitfield.h>
8 #include <linux/brcmphy.h>
9 #include <linux/export.h>
10 #include <linux/mdio.h>
11 #include <linux/module.h>
12 #include <linux/phy.h>
13 #include <linux/ethtool.h>
14 #include <linux/ethtool_netlink.h>
15
16 #define MII_BCM_CHANNEL_WIDTH 0x2000
17 #define BCM_CL45VEN_EEE_ADV 0x3c
18
__bcm_phy_write_exp(struct phy_device * phydev,u16 reg,u16 val)19 int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
20 {
21 int rc;
22
23 rc = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
24 if (rc < 0)
25 return rc;
26
27 return __phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
28 }
29 EXPORT_SYMBOL_GPL(__bcm_phy_write_exp);
30
bcm_phy_write_exp(struct phy_device * phydev,u16 reg,u16 val)31 int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
32 {
33 int rc;
34
35 phy_lock_mdio_bus(phydev);
36 rc = __bcm_phy_write_exp(phydev, reg, val);
37 phy_unlock_mdio_bus(phydev);
38
39 return rc;
40 }
41 EXPORT_SYMBOL_GPL(bcm_phy_write_exp);
42
__bcm_phy_read_exp(struct phy_device * phydev,u16 reg)43 int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
44 {
45 int val;
46
47 val = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
48 if (val < 0)
49 return val;
50
51 val = __phy_read(phydev, MII_BCM54XX_EXP_DATA);
52
53 /* Restore default value. It's O.K. if this write fails. */
54 __phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
55
56 return val;
57 }
58 EXPORT_SYMBOL_GPL(__bcm_phy_read_exp);
59
bcm_phy_read_exp(struct phy_device * phydev,u16 reg)60 int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
61 {
62 int rc;
63
64 phy_lock_mdio_bus(phydev);
65 rc = __bcm_phy_read_exp(phydev, reg);
66 phy_unlock_mdio_bus(phydev);
67
68 return rc;
69 }
70 EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
71
__bcm_phy_modify_exp(struct phy_device * phydev,u16 reg,u16 mask,u16 set)72 int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
73 {
74 int new, ret;
75
76 ret = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
77 if (ret < 0)
78 return ret;
79
80 ret = __phy_read(phydev, MII_BCM54XX_EXP_DATA);
81 if (ret < 0)
82 return ret;
83
84 new = (ret & ~mask) | set;
85 if (new == ret)
86 return 0;
87
88 return __phy_write(phydev, MII_BCM54XX_EXP_DATA, new);
89 }
90 EXPORT_SYMBOL_GPL(__bcm_phy_modify_exp);
91
bcm_phy_modify_exp(struct phy_device * phydev,u16 reg,u16 mask,u16 set)92 int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set)
93 {
94 int ret;
95
96 phy_lock_mdio_bus(phydev);
97 ret = __bcm_phy_modify_exp(phydev, reg, mask, set);
98 phy_unlock_mdio_bus(phydev);
99
100 return ret;
101 }
102 EXPORT_SYMBOL_GPL(bcm_phy_modify_exp);
103
bcm54xx_auxctl_read(struct phy_device * phydev,u16 regnum)104 int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
105 {
106 /* The register must be written to both the Shadow Register Select and
107 * the Shadow Read Register Selector
108 */
109 phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MASK |
110 regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT);
111 return phy_read(phydev, MII_BCM54XX_AUX_CTL);
112 }
113 EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read);
114
bcm54xx_auxctl_write(struct phy_device * phydev,u16 regnum,u16 val)115 int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
116 {
117 return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
118 }
119 EXPORT_SYMBOL(bcm54xx_auxctl_write);
120
bcm_phy_write_misc(struct phy_device * phydev,u16 reg,u16 chl,u16 val)121 int bcm_phy_write_misc(struct phy_device *phydev,
122 u16 reg, u16 chl, u16 val)
123 {
124 int rc;
125 int tmp;
126
127 rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
128 MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
129 if (rc < 0)
130 return rc;
131
132 tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
133 tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
134 rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
135 if (rc < 0)
136 return rc;
137
138 tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
139 rc = bcm_phy_write_exp(phydev, tmp, val);
140
141 return rc;
142 }
143 EXPORT_SYMBOL_GPL(bcm_phy_write_misc);
144
bcm_phy_read_misc(struct phy_device * phydev,u16 reg,u16 chl)145 int bcm_phy_read_misc(struct phy_device *phydev,
146 u16 reg, u16 chl)
147 {
148 int rc;
149 int tmp;
150
151 rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
152 MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
153 if (rc < 0)
154 return rc;
155
156 tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
157 tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
158 rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
159 if (rc < 0)
160 return rc;
161
162 tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
163 rc = bcm_phy_read_exp(phydev, tmp);
164
165 return rc;
166 }
167 EXPORT_SYMBOL_GPL(bcm_phy_read_misc);
168
bcm_phy_ack_intr(struct phy_device * phydev)169 int bcm_phy_ack_intr(struct phy_device *phydev)
170 {
171 int reg;
172
173 /* Clear pending interrupts. */
174 reg = phy_read(phydev, MII_BCM54XX_ISR);
175 if (reg < 0)
176 return reg;
177
178 return 0;
179 }
180 EXPORT_SYMBOL_GPL(bcm_phy_ack_intr);
181
bcm_phy_config_intr(struct phy_device * phydev)182 int bcm_phy_config_intr(struct phy_device *phydev)
183 {
184 int reg, err;
185
186 reg = phy_read(phydev, MII_BCM54XX_ECR);
187 if (reg < 0)
188 return reg;
189
190 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
191 err = bcm_phy_ack_intr(phydev);
192 if (err)
193 return err;
194
195 reg &= ~MII_BCM54XX_ECR_IM;
196 err = phy_write(phydev, MII_BCM54XX_ECR, reg);
197 } else {
198 reg |= MII_BCM54XX_ECR_IM;
199 err = phy_write(phydev, MII_BCM54XX_ECR, reg);
200 if (err)
201 return err;
202
203 err = bcm_phy_ack_intr(phydev);
204 }
205 return err;
206 }
207 EXPORT_SYMBOL_GPL(bcm_phy_config_intr);
208
bcm_phy_handle_interrupt(struct phy_device * phydev)209 irqreturn_t bcm_phy_handle_interrupt(struct phy_device *phydev)
210 {
211 int irq_status, irq_mask;
212
213 irq_status = phy_read(phydev, MII_BCM54XX_ISR);
214 if (irq_status < 0) {
215 phy_error(phydev);
216 return IRQ_NONE;
217 }
218
219 /* If a bit from the Interrupt Mask register is set, the corresponding
220 * bit from the Interrupt Status register is masked. So read the IMR
221 * and then flip the bits to get the list of possible interrupt
222 * sources.
223 */
224 irq_mask = phy_read(phydev, MII_BCM54XX_IMR);
225 if (irq_mask < 0) {
226 phy_error(phydev);
227 return IRQ_NONE;
228 }
229 irq_mask = ~irq_mask;
230
231 if (!(irq_status & irq_mask))
232 return IRQ_NONE;
233
234 phy_trigger_machine(phydev);
235
236 return IRQ_HANDLED;
237 }
238 EXPORT_SYMBOL_GPL(bcm_phy_handle_interrupt);
239
bcm_phy_read_shadow(struct phy_device * phydev,u16 shadow)240 int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow)
241 {
242 phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
243 return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
244 }
245 EXPORT_SYMBOL_GPL(bcm_phy_read_shadow);
246
bcm_phy_write_shadow(struct phy_device * phydev,u16 shadow,u16 val)247 int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
248 u16 val)
249 {
250 return phy_write(phydev, MII_BCM54XX_SHD,
251 MII_BCM54XX_SHD_WRITE |
252 MII_BCM54XX_SHD_VAL(shadow) |
253 MII_BCM54XX_SHD_DATA(val));
254 }
255 EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
256
__bcm_phy_read_rdb(struct phy_device * phydev,u16 rdb)257 int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
258 {
259 int val;
260
261 val = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
262 if (val < 0)
263 return val;
264
265 return __phy_read(phydev, MII_BCM54XX_RDB_DATA);
266 }
267 EXPORT_SYMBOL_GPL(__bcm_phy_read_rdb);
268
bcm_phy_read_rdb(struct phy_device * phydev,u16 rdb)269 int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb)
270 {
271 int ret;
272
273 phy_lock_mdio_bus(phydev);
274 ret = __bcm_phy_read_rdb(phydev, rdb);
275 phy_unlock_mdio_bus(phydev);
276
277 return ret;
278 }
279 EXPORT_SYMBOL_GPL(bcm_phy_read_rdb);
280
__bcm_phy_write_rdb(struct phy_device * phydev,u16 rdb,u16 val)281 int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
282 {
283 int ret;
284
285 ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
286 if (ret < 0)
287 return ret;
288
289 return __phy_write(phydev, MII_BCM54XX_RDB_DATA, val);
290 }
291 EXPORT_SYMBOL_GPL(__bcm_phy_write_rdb);
292
bcm_phy_write_rdb(struct phy_device * phydev,u16 rdb,u16 val)293 int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val)
294 {
295 int ret;
296
297 phy_lock_mdio_bus(phydev);
298 ret = __bcm_phy_write_rdb(phydev, rdb, val);
299 phy_unlock_mdio_bus(phydev);
300
301 return ret;
302 }
303 EXPORT_SYMBOL_GPL(bcm_phy_write_rdb);
304
__bcm_phy_modify_rdb(struct phy_device * phydev,u16 rdb,u16 mask,u16 set)305 int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
306 {
307 int new, ret;
308
309 ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
310 if (ret < 0)
311 return ret;
312
313 ret = __phy_read(phydev, MII_BCM54XX_RDB_DATA);
314 if (ret < 0)
315 return ret;
316
317 new = (ret & ~mask) | set;
318 if (new == ret)
319 return 0;
320
321 return __phy_write(phydev, MII_BCM54XX_RDB_DATA, new);
322 }
323 EXPORT_SYMBOL_GPL(__bcm_phy_modify_rdb);
324
bcm_phy_modify_rdb(struct phy_device * phydev,u16 rdb,u16 mask,u16 set)325 int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set)
326 {
327 int ret;
328
329 phy_lock_mdio_bus(phydev);
330 ret = __bcm_phy_modify_rdb(phydev, rdb, mask, set);
331 phy_unlock_mdio_bus(phydev);
332
333 return ret;
334 }
335 EXPORT_SYMBOL_GPL(bcm_phy_modify_rdb);
336
bcm_phy_enable_apd(struct phy_device * phydev,bool dll_pwr_down)337 int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
338 {
339 int val;
340
341 if (dll_pwr_down) {
342 val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
343 if (val < 0)
344 return val;
345
346 val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
347 bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
348 }
349
350 val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
351 if (val < 0)
352 return val;
353
354 /* Clear APD bits */
355 val &= BCM_APD_CLR_MASK;
356
357 if (phydev->autoneg == AUTONEG_ENABLE)
358 val |= BCM54XX_SHD_APD_EN;
359 else
360 val |= BCM_NO_ANEG_APD_EN;
361
362 /* Enable energy detect single link pulse for easy wakeup */
363 val |= BCM_APD_SINGLELP_EN;
364
365 /* Enable Auto Power-Down (APD) for the PHY */
366 return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
367 }
368 EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
369
bcm_phy_set_eee(struct phy_device * phydev,bool enable)370 int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
371 {
372 int val, mask = 0;
373
374 /* Enable EEE at PHY level */
375 val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL);
376 if (val < 0)
377 return val;
378
379 if (enable)
380 val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
381 else
382 val &= ~(LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X);
383
384 phy_write_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL, (u32)val);
385
386 /* Advertise EEE */
387 val = phy_read_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV);
388 if (val < 0)
389 return val;
390
391 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
392 phydev->supported))
393 mask |= MDIO_EEE_1000T;
394 if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
395 phydev->supported))
396 mask |= MDIO_EEE_100TX;
397
398 if (enable)
399 val |= mask;
400 else
401 val &= ~mask;
402
403 phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val);
404
405 return 0;
406 }
407 EXPORT_SYMBOL_GPL(bcm_phy_set_eee);
408
bcm_phy_downshift_get(struct phy_device * phydev,u8 * count)409 int bcm_phy_downshift_get(struct phy_device *phydev, u8 *count)
410 {
411 int val;
412
413 val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
414 if (val < 0)
415 return val;
416
417 /* Check if wirespeed is enabled or not */
418 if (!(val & MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN)) {
419 *count = DOWNSHIFT_DEV_DISABLE;
420 return 0;
421 }
422
423 val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2);
424 if (val < 0)
425 return val;
426
427 /* Downgrade after one link attempt */
428 if (val & BCM54XX_SHD_SCR2_WSPD_RTRY_DIS) {
429 *count = 1;
430 } else {
431 /* Downgrade after configured retry count */
432 val >>= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
433 val &= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK;
434 *count = val + BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET;
435 }
436
437 return 0;
438 }
439 EXPORT_SYMBOL_GPL(bcm_phy_downshift_get);
440
bcm_phy_downshift_set(struct phy_device * phydev,u8 count)441 int bcm_phy_downshift_set(struct phy_device *phydev, u8 count)
442 {
443 int val = 0, ret = 0;
444
445 /* Range check the number given */
446 if (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET >
447 BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK &&
448 count != DOWNSHIFT_DEV_DEFAULT_COUNT) {
449 return -ERANGE;
450 }
451
452 val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
453 if (val < 0)
454 return val;
455
456 /* Se the write enable bit */
457 val |= MII_BCM54XX_AUXCTL_MISC_WREN;
458
459 if (count == DOWNSHIFT_DEV_DISABLE) {
460 val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN;
461 return bcm54xx_auxctl_write(phydev,
462 MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
463 val);
464 } else {
465 val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN;
466 ret = bcm54xx_auxctl_write(phydev,
467 MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
468 val);
469 if (ret < 0)
470 return ret;
471 }
472
473 val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2);
474 val &= ~(BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK <<
475 BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT |
476 BCM54XX_SHD_SCR2_WSPD_RTRY_DIS);
477
478 switch (count) {
479 case 1:
480 val |= BCM54XX_SHD_SCR2_WSPD_RTRY_DIS;
481 break;
482 case DOWNSHIFT_DEV_DEFAULT_COUNT:
483 val |= 1 << BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
484 break;
485 default:
486 val |= (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET) <<
487 BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT;
488 break;
489 }
490
491 return bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR2, val);
492 }
493 EXPORT_SYMBOL_GPL(bcm_phy_downshift_set);
494
495 struct bcm_phy_hw_stat {
496 const char *string;
497 u8 reg;
498 u8 shift;
499 u8 bits;
500 };
501
502 /* Counters freeze at either 0xffff or 0xff, better than nothing */
503 static const struct bcm_phy_hw_stat bcm_phy_hw_stats[] = {
504 { "phy_receive_errors", MII_BRCM_CORE_BASE12, 0, 16 },
505 { "phy_serdes_ber_errors", MII_BRCM_CORE_BASE13, 8, 8 },
506 { "phy_false_carrier_sense_errors", MII_BRCM_CORE_BASE13, 0, 8 },
507 { "phy_local_rcvr_nok", MII_BRCM_CORE_BASE14, 8, 8 },
508 { "phy_remote_rcv_nok", MII_BRCM_CORE_BASE14, 0, 8 },
509 };
510
bcm_phy_get_sset_count(struct phy_device * phydev)511 int bcm_phy_get_sset_count(struct phy_device *phydev)
512 {
513 return ARRAY_SIZE(bcm_phy_hw_stats);
514 }
515 EXPORT_SYMBOL_GPL(bcm_phy_get_sset_count);
516
bcm_phy_get_strings(struct phy_device * phydev,u8 * data)517 void bcm_phy_get_strings(struct phy_device *phydev, u8 *data)
518 {
519 unsigned int i;
520
521 for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
522 strscpy(data + i * ETH_GSTRING_LEN,
523 bcm_phy_hw_stats[i].string, ETH_GSTRING_LEN);
524 }
525 EXPORT_SYMBOL_GPL(bcm_phy_get_strings);
526
527 /* Caller is supposed to provide appropriate storage for the library code to
528 * access the shadow copy
529 */
bcm_phy_get_stat(struct phy_device * phydev,u64 * shadow,unsigned int i)530 static u64 bcm_phy_get_stat(struct phy_device *phydev, u64 *shadow,
531 unsigned int i)
532 {
533 struct bcm_phy_hw_stat stat = bcm_phy_hw_stats[i];
534 int val;
535 u64 ret;
536
537 val = phy_read(phydev, stat.reg);
538 if (val < 0) {
539 ret = U64_MAX;
540 } else {
541 val >>= stat.shift;
542 val = val & ((1 << stat.bits) - 1);
543 shadow[i] += val;
544 ret = shadow[i];
545 }
546
547 return ret;
548 }
549
bcm_phy_get_stats(struct phy_device * phydev,u64 * shadow,struct ethtool_stats * stats,u64 * data)550 void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
551 struct ethtool_stats *stats, u64 *data)
552 {
553 unsigned int i;
554
555 for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++)
556 data[i] = bcm_phy_get_stat(phydev, shadow, i);
557 }
558 EXPORT_SYMBOL_GPL(bcm_phy_get_stats);
559
bcm_phy_r_rc_cal_reset(struct phy_device * phydev)560 void bcm_phy_r_rc_cal_reset(struct phy_device *phydev)
561 {
562 /* Reset R_CAL/RC_CAL Engine */
563 bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
564
565 /* Disable Reset R_AL/RC_CAL Engine */
566 bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
567 }
568 EXPORT_SYMBOL_GPL(bcm_phy_r_rc_cal_reset);
569
bcm_phy_28nm_a0b0_afe_config_init(struct phy_device * phydev)570 int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
571 {
572 /* Increase VCO range to prevent unlocking problem of PLL at low
573 * temp
574 */
575 bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
576
577 /* Change Ki to 011 */
578 bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
579
580 /* Disable loading of TVCO buffer to bandgap, set bandgap trim
581 * to 111
582 */
583 bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
584
585 /* Adjust bias current trim by -3 */
586 bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
587
588 /* Switch to CORE_BASE1E */
589 phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
590
591 bcm_phy_r_rc_cal_reset(phydev);
592
593 /* write AFE_RXCONFIG_0 */
594 bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
595
596 /* write AFE_RXCONFIG_1 */
597 bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
598
599 /* write AFE_RX_LP_COUNTER */
600 bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
601
602 /* write AFE_HPF_TRIM_OTHERS */
603 bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
604
605 /* write AFTE_TX_CONFIG */
606 bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
607
608 return 0;
609 }
610 EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
611
bcm_phy_enable_jumbo(struct phy_device * phydev)612 int bcm_phy_enable_jumbo(struct phy_device *phydev)
613 {
614 int ret;
615
616 ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL);
617 if (ret < 0)
618 return ret;
619
620 /* Enable extended length packet reception */
621 ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
622 ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN);
623 if (ret < 0)
624 return ret;
625
626 /* Enable the elastic FIFO for raising the transmission limit from
627 * 4.5KB to 10KB, at the expense of an additional 16 ns in propagation
628 * latency.
629 */
630 return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE);
631 }
632 EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo);
633
__bcm_phy_enable_rdb_access(struct phy_device * phydev)634 static int __bcm_phy_enable_rdb_access(struct phy_device *phydev)
635 {
636 return __bcm_phy_write_exp(phydev, BCM54XX_EXP_REG7E, 0);
637 }
638
__bcm_phy_enable_legacy_access(struct phy_device * phydev)639 static int __bcm_phy_enable_legacy_access(struct phy_device *phydev)
640 {
641 return __bcm_phy_write_rdb(phydev, BCM54XX_RDB_REG0087,
642 BCM54XX_ACCESS_MODE_LEGACY_EN);
643 }
644
_bcm_phy_cable_test_start(struct phy_device * phydev,bool is_rdb)645 static int _bcm_phy_cable_test_start(struct phy_device *phydev, bool is_rdb)
646 {
647 u16 mask, set;
648 int ret;
649
650 /* Auto-negotiation must be enabled for cable diagnostics to work, but
651 * don't advertise any capabilities.
652 */
653 phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
654 phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
655 phy_write(phydev, MII_CTRL1000, 0);
656
657 phy_lock_mdio_bus(phydev);
658 if (is_rdb) {
659 ret = __bcm_phy_enable_legacy_access(phydev);
660 if (ret)
661 goto out;
662 }
663
664 mask = BCM54XX_ECD_CTRL_CROSS_SHORT_DIS | BCM54XX_ECD_CTRL_UNIT_MASK;
665 set = BCM54XX_ECD_CTRL_RUN | BCM54XX_ECD_CTRL_BREAK_LINK |
666 FIELD_PREP(BCM54XX_ECD_CTRL_UNIT_MASK,
667 BCM54XX_ECD_CTRL_UNIT_CM);
668
669 ret = __bcm_phy_modify_exp(phydev, BCM54XX_EXP_ECD_CTRL, mask, set);
670
671 out:
672 /* re-enable the RDB access even if there was an error */
673 if (is_rdb)
674 ret = __bcm_phy_enable_rdb_access(phydev) ? : ret;
675
676 phy_unlock_mdio_bus(phydev);
677
678 return ret;
679 }
680
bcm_phy_cable_test_report_trans(int result)681 static int bcm_phy_cable_test_report_trans(int result)
682 {
683 switch (result) {
684 case BCM54XX_ECD_FAULT_TYPE_OK:
685 return ETHTOOL_A_CABLE_RESULT_CODE_OK;
686 case BCM54XX_ECD_FAULT_TYPE_OPEN:
687 return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
688 case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT:
689 return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
690 case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT:
691 return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
692 case BCM54XX_ECD_FAULT_TYPE_INVALID:
693 case BCM54XX_ECD_FAULT_TYPE_BUSY:
694 default:
695 return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
696 }
697 }
698
bcm_phy_distance_valid(int result)699 static bool bcm_phy_distance_valid(int result)
700 {
701 switch (result) {
702 case BCM54XX_ECD_FAULT_TYPE_OPEN:
703 case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT:
704 case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT:
705 return true;
706 }
707 return false;
708 }
709
bcm_phy_report_length(struct phy_device * phydev,int pair)710 static int bcm_phy_report_length(struct phy_device *phydev, int pair)
711 {
712 int val;
713
714 val = __bcm_phy_read_exp(phydev,
715 BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS + pair);
716 if (val < 0)
717 return val;
718
719 if (val == BCM54XX_ECD_LENGTH_RESULTS_INVALID)
720 return 0;
721
722 ethnl_cable_test_fault_length(phydev, pair, val);
723
724 return 0;
725 }
726
_bcm_phy_cable_test_get_status(struct phy_device * phydev,bool * finished,bool is_rdb)727 static int _bcm_phy_cable_test_get_status(struct phy_device *phydev,
728 bool *finished, bool is_rdb)
729 {
730 int pair_a, pair_b, pair_c, pair_d, ret;
731
732 *finished = false;
733
734 phy_lock_mdio_bus(phydev);
735
736 if (is_rdb) {
737 ret = __bcm_phy_enable_legacy_access(phydev);
738 if (ret)
739 goto out;
740 }
741
742 ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_CTRL);
743 if (ret < 0)
744 goto out;
745
746 if (ret & BCM54XX_ECD_CTRL_IN_PROGRESS) {
747 ret = 0;
748 goto out;
749 }
750
751 ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_FAULT_TYPE);
752 if (ret < 0)
753 goto out;
754
755 pair_a = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK, ret);
756 pair_b = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK, ret);
757 pair_c = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK, ret);
758 pair_d = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK, ret);
759
760 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
761 bcm_phy_cable_test_report_trans(pair_a));
762 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
763 bcm_phy_cable_test_report_trans(pair_b));
764 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
765 bcm_phy_cable_test_report_trans(pair_c));
766 ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
767 bcm_phy_cable_test_report_trans(pair_d));
768
769 if (bcm_phy_distance_valid(pair_a))
770 bcm_phy_report_length(phydev, 0);
771 if (bcm_phy_distance_valid(pair_b))
772 bcm_phy_report_length(phydev, 1);
773 if (bcm_phy_distance_valid(pair_c))
774 bcm_phy_report_length(phydev, 2);
775 if (bcm_phy_distance_valid(pair_d))
776 bcm_phy_report_length(phydev, 3);
777
778 ret = 0;
779 *finished = true;
780 out:
781 /* re-enable the RDB access even if there was an error */
782 if (is_rdb)
783 ret = __bcm_phy_enable_rdb_access(phydev) ? : ret;
784
785 phy_unlock_mdio_bus(phydev);
786
787 return ret;
788 }
789
bcm_phy_cable_test_start(struct phy_device * phydev)790 int bcm_phy_cable_test_start(struct phy_device *phydev)
791 {
792 return _bcm_phy_cable_test_start(phydev, false);
793 }
794 EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start);
795
bcm_phy_cable_test_get_status(struct phy_device * phydev,bool * finished)796 int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished)
797 {
798 return _bcm_phy_cable_test_get_status(phydev, finished, false);
799 }
800 EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status);
801
802 /* We assume that all PHYs which support RDB access can be switched to legacy
803 * mode. If, in the future, this is not true anymore, we have to re-implement
804 * this with RDB access.
805 */
bcm_phy_cable_test_start_rdb(struct phy_device * phydev)806 int bcm_phy_cable_test_start_rdb(struct phy_device *phydev)
807 {
808 return _bcm_phy_cable_test_start(phydev, true);
809 }
810 EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start_rdb);
811
bcm_phy_cable_test_get_status_rdb(struct phy_device * phydev,bool * finished)812 int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
813 bool *finished)
814 {
815 return _bcm_phy_cable_test_get_status(phydev, finished, true);
816 }
817 EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb);
818
819 MODULE_DESCRIPTION("Broadcom PHY Library");
820 MODULE_LICENSE("GPL v2");
821 MODULE_AUTHOR("Broadcom Corporation");
822