1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Block data types and constants.  Directly include this file only to
4  * break include dependency loop.
5  */
6 #ifndef __LINUX_BLK_TYPES_H
7 #define __LINUX_BLK_TYPES_H
8 
9 #include <linux/types.h>
10 #include <linux/bvec.h>
11 #include <linux/device.h>
12 #include <linux/ktime.h>
13 
14 struct bio_set;
15 struct bio;
16 struct bio_integrity_payload;
17 struct page;
18 struct io_context;
19 struct cgroup_subsys_state;
20 typedef void (bio_end_io_t) (struct bio *);
21 struct bio_crypt_ctx;
22 
23 /*
24  * The basic unit of block I/O is a sector. It is used in a number of contexts
25  * in Linux (blk, bio, genhd). The size of one sector is 512 = 2**9
26  * bytes. Variables of type sector_t represent an offset or size that is a
27  * multiple of 512 bytes. Hence these two constants.
28  */
29 #ifndef SECTOR_SHIFT
30 #define SECTOR_SHIFT 9
31 #endif
32 #ifndef SECTOR_SIZE
33 #define SECTOR_SIZE (1 << SECTOR_SHIFT)
34 #endif
35 
36 #define PAGE_SECTORS_SHIFT	(PAGE_SHIFT - SECTOR_SHIFT)
37 #define PAGE_SECTORS		(1 << PAGE_SECTORS_SHIFT)
38 #define SECTOR_MASK		(PAGE_SECTORS - 1)
39 
40 struct block_device {
41 	sector_t		bd_start_sect;
42 	sector_t		bd_nr_sectors;
43 	struct disk_stats __percpu *bd_stats;
44 	unsigned long		bd_stamp;
45 	bool			bd_read_only;	/* read-only policy */
46 	dev_t			bd_dev;
47 	atomic_t		bd_openers;
48 	struct inode *		bd_inode;	/* will die */
49 	struct super_block *	bd_super;
50 	void *			bd_claiming;
51 	struct device		bd_device;
52 	void *			bd_holder;
53 	int			bd_holders;
54 	bool			bd_write_holder;
55 	struct kobject		*bd_holder_dir;
56 	u8			bd_partno;
57 	spinlock_t		bd_size_lock; /* for bd_inode->i_size updates */
58 	struct gendisk *	bd_disk;
59 	struct request_queue *	bd_queue;
60 
61 	/* The counter of freeze processes */
62 	int			bd_fsfreeze_count;
63 	/* Mutex for freeze */
64 	struct mutex		bd_fsfreeze_mutex;
65 	struct super_block	*bd_fsfreeze_sb;
66 
67 	struct partition_meta_info *bd_meta_info;
68 #ifdef CONFIG_FAIL_MAKE_REQUEST
69 	bool			bd_make_it_fail;
70 #endif
71 } __randomize_layout;
72 
73 #define bdev_whole(_bdev) \
74 	((_bdev)->bd_disk->part0)
75 
76 #define dev_to_bdev(device) \
77 	container_of((device), struct block_device, bd_device)
78 
79 #define bdev_kobj(_bdev) \
80 	(&((_bdev)->bd_device.kobj))
81 
82 /*
83  * Block error status values.  See block/blk-core:blk_errors for the details.
84  * Alpha cannot write a byte atomically, so we need to use 32-bit value.
85  */
86 #if defined(CONFIG_ALPHA) && !defined(__alpha_bwx__)
87 typedef u32 __bitwise blk_status_t;
88 typedef u32 blk_short_t;
89 #else
90 typedef u8 __bitwise blk_status_t;
91 typedef u16 blk_short_t;
92 #endif
93 #define	BLK_STS_OK 0
94 #define BLK_STS_NOTSUPP		((__force blk_status_t)1)
95 #define BLK_STS_TIMEOUT		((__force blk_status_t)2)
96 #define BLK_STS_NOSPC		((__force blk_status_t)3)
97 #define BLK_STS_TRANSPORT	((__force blk_status_t)4)
98 #define BLK_STS_TARGET		((__force blk_status_t)5)
99 #define BLK_STS_NEXUS		((__force blk_status_t)6)
100 #define BLK_STS_MEDIUM		((__force blk_status_t)7)
101 #define BLK_STS_PROTECTION	((__force blk_status_t)8)
102 #define BLK_STS_RESOURCE	((__force blk_status_t)9)
103 #define BLK_STS_IOERR		((__force blk_status_t)10)
104 
105 /* hack for device mapper, don't use elsewhere: */
106 #define BLK_STS_DM_REQUEUE    ((__force blk_status_t)11)
107 
108 /*
109  * BLK_STS_AGAIN should only be returned if RQF_NOWAIT is set
110  * and the bio would block (cf bio_wouldblock_error())
111  */
112 #define BLK_STS_AGAIN		((__force blk_status_t)12)
113 
114 /*
115  * BLK_STS_DEV_RESOURCE is returned from the driver to the block layer if
116  * device related resources are unavailable, but the driver can guarantee
117  * that the queue will be rerun in the future once resources become
118  * available again. This is typically the case for device specific
119  * resources that are consumed for IO. If the driver fails allocating these
120  * resources, we know that inflight (or pending) IO will free these
121  * resource upon completion.
122  *
123  * This is different from BLK_STS_RESOURCE in that it explicitly references
124  * a device specific resource. For resources of wider scope, allocation
125  * failure can happen without having pending IO. This means that we can't
126  * rely on request completions freeing these resources, as IO may not be in
127  * flight. Examples of that are kernel memory allocations, DMA mappings, or
128  * any other system wide resources.
129  */
130 #define BLK_STS_DEV_RESOURCE	((__force blk_status_t)13)
131 
132 /*
133  * BLK_STS_ZONE_RESOURCE is returned from the driver to the block layer if zone
134  * related resources are unavailable, but the driver can guarantee the queue
135  * will be rerun in the future once the resources become available again.
136  *
137  * This is different from BLK_STS_DEV_RESOURCE in that it explicitly references
138  * a zone specific resource and IO to a different zone on the same device could
139  * still be served. Examples of that are zones that are write-locked, but a read
140  * to the same zone could be served.
141  */
142 #define BLK_STS_ZONE_RESOURCE	((__force blk_status_t)14)
143 
144 /*
145  * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion
146  * path if the device returns a status indicating that too many zone resources
147  * are currently open. The same command should be successful if resubmitted
148  * after the number of open zones decreases below the device's limits, which is
149  * reported in the request_queue's max_open_zones.
150  */
151 #define BLK_STS_ZONE_OPEN_RESOURCE	((__force blk_status_t)15)
152 
153 /*
154  * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion
155  * path if the device returns a status indicating that too many zone resources
156  * are currently active. The same command should be successful if resubmitted
157  * after the number of active zones decreases below the device's limits, which
158  * is reported in the request_queue's max_active_zones.
159  */
160 #define BLK_STS_ZONE_ACTIVE_RESOURCE	((__force blk_status_t)16)
161 
162 /*
163  * BLK_STS_OFFLINE is returned from the driver when the target device is offline
164  * or is being taken offline. This could help differentiate the case where a
165  * device is intentionally being shut down from a real I/O error.
166  */
167 #define BLK_STS_OFFLINE		((__force blk_status_t)17)
168 
169 /**
170  * blk_path_error - returns true if error may be path related
171  * @error: status the request was completed with
172  *
173  * Description:
174  *     This classifies block error status into non-retryable errors and ones
175  *     that may be successful if retried on a failover path.
176  *
177  * Return:
178  *     %false - retrying failover path will not help
179  *     %true  - may succeed if retried
180  */
blk_path_error(blk_status_t error)181 static inline bool blk_path_error(blk_status_t error)
182 {
183 	switch (error) {
184 	case BLK_STS_NOTSUPP:
185 	case BLK_STS_NOSPC:
186 	case BLK_STS_TARGET:
187 	case BLK_STS_NEXUS:
188 	case BLK_STS_MEDIUM:
189 	case BLK_STS_PROTECTION:
190 		return false;
191 	}
192 
193 	/* Anything else could be a path failure, so should be retried */
194 	return true;
195 }
196 
197 /*
198  * From most significant bit:
199  * 1 bit: reserved for other usage, see below
200  * 12 bits: original size of bio
201  * 51 bits: issue time of bio
202  */
203 #define BIO_ISSUE_RES_BITS      1
204 #define BIO_ISSUE_SIZE_BITS     12
205 #define BIO_ISSUE_RES_SHIFT     (64 - BIO_ISSUE_RES_BITS)
206 #define BIO_ISSUE_SIZE_SHIFT    (BIO_ISSUE_RES_SHIFT - BIO_ISSUE_SIZE_BITS)
207 #define BIO_ISSUE_TIME_MASK     ((1ULL << BIO_ISSUE_SIZE_SHIFT) - 1)
208 #define BIO_ISSUE_SIZE_MASK     \
209 	(((1ULL << BIO_ISSUE_SIZE_BITS) - 1) << BIO_ISSUE_SIZE_SHIFT)
210 #define BIO_ISSUE_RES_MASK      (~((1ULL << BIO_ISSUE_RES_SHIFT) - 1))
211 
212 /* Reserved bit for blk-throtl */
213 #define BIO_ISSUE_THROTL_SKIP_LATENCY (1ULL << 63)
214 
215 struct bio_issue {
216 	u64 value;
217 };
218 
__bio_issue_time(u64 time)219 static inline u64 __bio_issue_time(u64 time)
220 {
221 	return time & BIO_ISSUE_TIME_MASK;
222 }
223 
bio_issue_time(struct bio_issue * issue)224 static inline u64 bio_issue_time(struct bio_issue *issue)
225 {
226 	return __bio_issue_time(issue->value);
227 }
228 
bio_issue_size(struct bio_issue * issue)229 static inline sector_t bio_issue_size(struct bio_issue *issue)
230 {
231 	return ((issue->value & BIO_ISSUE_SIZE_MASK) >> BIO_ISSUE_SIZE_SHIFT);
232 }
233 
bio_issue_init(struct bio_issue * issue,sector_t size)234 static inline void bio_issue_init(struct bio_issue *issue,
235 				       sector_t size)
236 {
237 	size &= (1ULL << BIO_ISSUE_SIZE_BITS) - 1;
238 	issue->value = ((issue->value & BIO_ISSUE_RES_MASK) |
239 			(ktime_get_ns() & BIO_ISSUE_TIME_MASK) |
240 			((u64)size << BIO_ISSUE_SIZE_SHIFT));
241 }
242 
243 typedef __u32 __bitwise blk_opf_t;
244 
245 typedef unsigned int blk_qc_t;
246 #define BLK_QC_T_NONE		-1U
247 
248 /*
249  * main unit of I/O for the block layer and lower layers (ie drivers and
250  * stacking drivers)
251  */
252 struct bio {
253 	struct bio		*bi_next;	/* request queue link */
254 	struct block_device	*bi_bdev;
255 	blk_opf_t		bi_opf;		/* bottom bits REQ_OP, top bits
256 						 * req_flags.
257 						 */
258 	unsigned short		bi_flags;	/* BIO_* below */
259 	unsigned short		bi_ioprio;
260 	blk_status_t		bi_status;
261 	atomic_t		__bi_remaining;
262 
263 	struct bvec_iter	bi_iter;
264 
265 	blk_qc_t		bi_cookie;
266 	bio_end_io_t		*bi_end_io;
267 	void			*bi_private;
268 #ifdef CONFIG_BLK_CGROUP
269 	/*
270 	 * Represents the association of the css and request_queue for the bio.
271 	 * If a bio goes direct to device, it will not have a blkg as it will
272 	 * not have a request_queue associated with it.  The reference is put
273 	 * on release of the bio.
274 	 */
275 	struct blkcg_gq		*bi_blkg;
276 	struct bio_issue	bi_issue;
277 #ifdef CONFIG_BLK_CGROUP_IOCOST
278 	u64			bi_iocost_cost;
279 #endif
280 #endif
281 
282 #ifdef CONFIG_BLK_INLINE_ENCRYPTION
283 	struct bio_crypt_ctx	*bi_crypt_context;
284 #endif
285 
286 	union {
287 #if defined(CONFIG_BLK_DEV_INTEGRITY)
288 		struct bio_integrity_payload *bi_integrity; /* data integrity */
289 #endif
290 	};
291 
292 	unsigned short		bi_vcnt;	/* how many bio_vec's */
293 
294 	/*
295 	 * Everything starting with bi_max_vecs will be preserved by bio_reset()
296 	 */
297 
298 	unsigned short		bi_max_vecs;	/* max bvl_vecs we can hold */
299 
300 	atomic_t		__bi_cnt;	/* pin count */
301 
302 	struct bio_vec		*bi_io_vec;	/* the actual vec list */
303 
304 	struct bio_set		*bi_pool;
305 
306 	/*
307 	 * We can inline a number of vecs at the end of the bio, to avoid
308 	 * double allocations for a small number of bio_vecs. This member
309 	 * MUST obviously be kept at the very end of the bio.
310 	 */
311 	struct bio_vec		bi_inline_vecs[];
312 };
313 
314 #define BIO_RESET_BYTES		offsetof(struct bio, bi_max_vecs)
315 #define BIO_MAX_SECTORS		(UINT_MAX >> SECTOR_SHIFT)
316 
317 /*
318  * bio flags
319  */
320 enum {
321 	BIO_NO_PAGE_REF,	/* don't put release vec pages */
322 	BIO_CLONED,		/* doesn't own data */
323 	BIO_BOUNCED,		/* bio is a bounce bio */
324 	BIO_QUIET,		/* Make BIO Quiet */
325 	BIO_CHAIN,		/* chained bio, ->bi_remaining in effect */
326 	BIO_REFFED,		/* bio has elevated ->bi_cnt */
327 	BIO_BPS_THROTTLED,	/* This bio has already been subjected to
328 				 * throttling rules. Don't do it again. */
329 	BIO_TRACE_COMPLETION,	/* bio_endio() should trace the final completion
330 				 * of this bio. */
331 	BIO_CGROUP_ACCT,	/* has been accounted to a cgroup */
332 	BIO_QOS_THROTTLED,	/* bio went through rq_qos throttle path */
333 	BIO_QOS_MERGED,		/* but went through rq_qos merge path */
334 	BIO_REMAPPED,
335 	BIO_ZONE_WRITE_LOCKED,	/* Owns a zoned device zone write lock */
336 	BIO_FLAG_LAST
337 };
338 
339 typedef __u32 __bitwise blk_mq_req_flags_t;
340 
341 #define REQ_OP_BITS	8
342 #define REQ_OP_MASK	(__force blk_opf_t)((1 << REQ_OP_BITS) - 1)
343 #define REQ_FLAG_BITS	24
344 
345 /**
346  * enum req_op - Operations common to the bio and request structures.
347  * We use 8 bits for encoding the operation, and the remaining 24 for flags.
348  *
349  * The least significant bit of the operation number indicates the data
350  * transfer direction:
351  *
352  *   - if the least significant bit is set transfers are TO the device
353  *   - if the least significant bit is not set transfers are FROM the device
354  *
355  * If a operation does not transfer data the least significant bit has no
356  * meaning.
357  */
358 enum req_op {
359 	/* read sectors from the device */
360 	REQ_OP_READ		= (__force blk_opf_t)0,
361 	/* write sectors to the device */
362 	REQ_OP_WRITE		= (__force blk_opf_t)1,
363 	/* flush the volatile write cache */
364 	REQ_OP_FLUSH		= (__force blk_opf_t)2,
365 	/* discard sectors */
366 	REQ_OP_DISCARD		= (__force blk_opf_t)3,
367 	/* securely erase sectors */
368 	REQ_OP_SECURE_ERASE	= (__force blk_opf_t)5,
369 	/* write the zero filled sector many times */
370 	REQ_OP_WRITE_ZEROES	= (__force blk_opf_t)9,
371 	/* Open a zone */
372 	REQ_OP_ZONE_OPEN	= (__force blk_opf_t)10,
373 	/* Close a zone */
374 	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)11,
375 	/* Transition a zone to full */
376 	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)12,
377 	/* write data at the current zone write pointer */
378 	REQ_OP_ZONE_APPEND	= (__force blk_opf_t)13,
379 	/* reset a zone write pointer */
380 	REQ_OP_ZONE_RESET	= (__force blk_opf_t)15,
381 	/* reset all the zone present on the device */
382 	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)17,
383 
384 	/* Driver private requests */
385 	REQ_OP_DRV_IN		= (__force blk_opf_t)34,
386 	REQ_OP_DRV_OUT		= (__force blk_opf_t)35,
387 
388 	REQ_OP_LAST		= (__force blk_opf_t)36,
389 };
390 
391 enum req_flag_bits {
392 	__REQ_FAILFAST_DEV =	/* no driver retries of device errors */
393 		REQ_OP_BITS,
394 	__REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
395 	__REQ_FAILFAST_DRIVER,	/* no driver retries of driver errors */
396 	__REQ_SYNC,		/* request is sync (sync write or read) */
397 	__REQ_META,		/* metadata io request */
398 	__REQ_PRIO,		/* boost priority in cfq */
399 	__REQ_NOMERGE,		/* don't touch this for merging */
400 	__REQ_IDLE,		/* anticipate more IO after this one */
401 	__REQ_INTEGRITY,	/* I/O includes block integrity payload */
402 	__REQ_FUA,		/* forced unit access */
403 	__REQ_PREFLUSH,		/* request for cache flush */
404 	__REQ_RAHEAD,		/* read ahead, can fail anytime */
405 	__REQ_BACKGROUND,	/* background IO */
406 	__REQ_NOWAIT,           /* Don't wait if request will block */
407 	/*
408 	 * When a shared kthread needs to issue a bio for a cgroup, doing
409 	 * so synchronously can lead to priority inversions as the kthread
410 	 * can be trapped waiting for that cgroup.  CGROUP_PUNT flag makes
411 	 * submit_bio() punt the actual issuing to a dedicated per-blkcg
412 	 * work item to avoid such priority inversions.
413 	 */
414 	__REQ_CGROUP_PUNT,
415 	__REQ_POLLED,		/* caller polls for completion using bio_poll */
416 	__REQ_ALLOC_CACHE,	/* allocate IO from cache if available */
417 	__REQ_SWAP,		/* swap I/O */
418 	__REQ_DRV,		/* for driver use */
419 
420 	/*
421 	 * Command specific flags, keep last:
422 	 */
423 	/* for REQ_OP_WRITE_ZEROES: */
424 	__REQ_NOUNMAP,		/* do not free blocks when zeroing */
425 
426 	__REQ_NR_BITS,		/* stops here */
427 };
428 
429 #define REQ_FAILFAST_DEV	\
430 			(__force blk_opf_t)(1ULL << __REQ_FAILFAST_DEV)
431 #define REQ_FAILFAST_TRANSPORT	\
432 			(__force blk_opf_t)(1ULL << __REQ_FAILFAST_TRANSPORT)
433 #define REQ_FAILFAST_DRIVER	\
434 			(__force blk_opf_t)(1ULL << __REQ_FAILFAST_DRIVER)
435 #define REQ_SYNC	(__force blk_opf_t)(1ULL << __REQ_SYNC)
436 #define REQ_META	(__force blk_opf_t)(1ULL << __REQ_META)
437 #define REQ_PRIO	(__force blk_opf_t)(1ULL << __REQ_PRIO)
438 #define REQ_NOMERGE	(__force blk_opf_t)(1ULL << __REQ_NOMERGE)
439 #define REQ_IDLE	(__force blk_opf_t)(1ULL << __REQ_IDLE)
440 #define REQ_INTEGRITY	(__force blk_opf_t)(1ULL << __REQ_INTEGRITY)
441 #define REQ_FUA		(__force blk_opf_t)(1ULL << __REQ_FUA)
442 #define REQ_PREFLUSH	(__force blk_opf_t)(1ULL << __REQ_PREFLUSH)
443 #define REQ_RAHEAD	(__force blk_opf_t)(1ULL << __REQ_RAHEAD)
444 #define REQ_BACKGROUND	(__force blk_opf_t)(1ULL << __REQ_BACKGROUND)
445 #define REQ_NOWAIT	(__force blk_opf_t)(1ULL << __REQ_NOWAIT)
446 #define REQ_CGROUP_PUNT	(__force blk_opf_t)(1ULL << __REQ_CGROUP_PUNT)
447 
448 #define REQ_NOUNMAP	(__force blk_opf_t)(1ULL << __REQ_NOUNMAP)
449 #define REQ_POLLED	(__force blk_opf_t)(1ULL << __REQ_POLLED)
450 #define REQ_ALLOC_CACHE	(__force blk_opf_t)(1ULL << __REQ_ALLOC_CACHE)
451 
452 #define REQ_DRV		(__force blk_opf_t)(1ULL << __REQ_DRV)
453 #define REQ_SWAP	(__force blk_opf_t)(1ULL << __REQ_SWAP)
454 
455 #define REQ_FAILFAST_MASK \
456 	(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
457 
458 #define REQ_NOMERGE_FLAGS \
459 	(REQ_NOMERGE | REQ_PREFLUSH | REQ_FUA)
460 
461 enum stat_group {
462 	STAT_READ,
463 	STAT_WRITE,
464 	STAT_DISCARD,
465 	STAT_FLUSH,
466 
467 	NR_STAT_GROUPS
468 };
469 
bio_op(const struct bio * bio)470 static inline enum req_op bio_op(const struct bio *bio)
471 {
472 	return bio->bi_opf & REQ_OP_MASK;
473 }
474 
op_is_write(blk_opf_t op)475 static inline bool op_is_write(blk_opf_t op)
476 {
477 	return !!(op & (__force blk_opf_t)1);
478 }
479 
480 /*
481  * Check if the bio or request is one that needs special treatment in the
482  * flush state machine.
483  */
op_is_flush(blk_opf_t op)484 static inline bool op_is_flush(blk_opf_t op)
485 {
486 	return op & (REQ_FUA | REQ_PREFLUSH);
487 }
488 
489 /*
490  * Reads are always treated as synchronous, as are requests with the FUA or
491  * PREFLUSH flag.  Other operations may be marked as synchronous using the
492  * REQ_SYNC flag.
493  */
op_is_sync(blk_opf_t op)494 static inline bool op_is_sync(blk_opf_t op)
495 {
496 	return (op & REQ_OP_MASK) == REQ_OP_READ ||
497 		(op & (REQ_SYNC | REQ_FUA | REQ_PREFLUSH));
498 }
499 
op_is_discard(blk_opf_t op)500 static inline bool op_is_discard(blk_opf_t op)
501 {
502 	return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
503 }
504 
505 /*
506  * Check if a bio or request operation is a zone management operation, with
507  * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
508  * due to its different handling in the block layer and device response in
509  * case of command failure.
510  */
op_is_zone_mgmt(enum req_op op)511 static inline bool op_is_zone_mgmt(enum req_op op)
512 {
513 	switch (op & REQ_OP_MASK) {
514 	case REQ_OP_ZONE_RESET:
515 	case REQ_OP_ZONE_OPEN:
516 	case REQ_OP_ZONE_CLOSE:
517 	case REQ_OP_ZONE_FINISH:
518 		return true;
519 	default:
520 		return false;
521 	}
522 }
523 
op_stat_group(enum req_op op)524 static inline int op_stat_group(enum req_op op)
525 {
526 	if (op_is_discard(op))
527 		return STAT_DISCARD;
528 	return op_is_write(op);
529 }
530 
531 struct blk_rq_stat {
532 	u64 mean;
533 	u64 min;
534 	u64 max;
535 	u32 nr_samples;
536 	u64 batch;
537 };
538 
539 #endif /* __LINUX_BLK_TYPES_H */
540