1 /*
2 * Copyright (c) 2016 Intel Corporation
3 *
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
13 *
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 * OF THIS SOFTWARE.
21 */
22
23 #include <drm/drm_atomic_helper.h>
24 #include <drm/drm_fb_helper.h>
25 #include <drm/drm_fourcc.h>
26 #include <drm/drm_framebuffer.h>
27 #include <drm/drm_modeset_helper.h>
28 #include <drm/drm_plane_helper.h>
29 #include <drm/drm_print.h>
30 #include <drm/drm_probe_helper.h>
31
32 /**
33 * DOC: aux kms helpers
34 *
35 * This helper library contains various one-off functions which don't really fit
36 * anywhere else in the DRM modeset helper library.
37 */
38
39 /**
40 * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
41 * connector list
42 * @dev: drm device to operate on
43 *
44 * Some userspace presumes that the first connected connector is the main
45 * display, where it's supposed to display e.g. the login screen. For
46 * laptops, this should be the main panel. Use this function to sort all
47 * (eDP/LVDS/DSI) panels to the front of the connector list, instead of
48 * painstakingly trying to initialize them in the right order.
49 */
drm_helper_move_panel_connectors_to_head(struct drm_device * dev)50 void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
51 {
52 struct drm_connector *connector, *tmp;
53 struct list_head panel_list;
54
55 INIT_LIST_HEAD(&panel_list);
56
57 spin_lock_irq(&dev->mode_config.connector_list_lock);
58 list_for_each_entry_safe(connector, tmp,
59 &dev->mode_config.connector_list, head) {
60 if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS ||
61 connector->connector_type == DRM_MODE_CONNECTOR_eDP ||
62 connector->connector_type == DRM_MODE_CONNECTOR_DSI)
63 list_move_tail(&connector->head, &panel_list);
64 }
65
66 list_splice(&panel_list, &dev->mode_config.connector_list);
67 spin_unlock_irq(&dev->mode_config.connector_list_lock);
68 }
69 EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head);
70
71 /**
72 * drm_helper_mode_fill_fb_struct - fill out framebuffer metadata
73 * @dev: DRM device
74 * @fb: drm_framebuffer object to fill out
75 * @mode_cmd: metadata from the userspace fb creation request
76 *
77 * This helper can be used in a drivers fb_create callback to pre-fill the fb's
78 * metadata fields.
79 */
drm_helper_mode_fill_fb_struct(struct drm_device * dev,struct drm_framebuffer * fb,const struct drm_mode_fb_cmd2 * mode_cmd)80 void drm_helper_mode_fill_fb_struct(struct drm_device *dev,
81 struct drm_framebuffer *fb,
82 const struct drm_mode_fb_cmd2 *mode_cmd)
83 {
84 int i;
85
86 fb->dev = dev;
87 fb->format = drm_get_format_info(dev, mode_cmd);
88 fb->width = mode_cmd->width;
89 fb->height = mode_cmd->height;
90 for (i = 0; i < 4; i++) {
91 fb->pitches[i] = mode_cmd->pitches[i];
92 fb->offsets[i] = mode_cmd->offsets[i];
93 }
94 fb->modifier = mode_cmd->modifier[0];
95 fb->flags = mode_cmd->flags;
96 }
97 EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
98
99 /*
100 * This is the minimal list of formats that seem to be safe for modeset use
101 * with all current DRM drivers. Most hardware can actually support more
102 * formats than this and drivers may specify a more accurate list when
103 * creating the primary plane.
104 */
105 static const uint32_t safe_modeset_formats[] = {
106 DRM_FORMAT_XRGB8888,
107 DRM_FORMAT_ARGB8888,
108 };
109
110 static const struct drm_plane_funcs primary_plane_funcs = {
111 DRM_PLANE_NON_ATOMIC_FUNCS,
112 };
113
114 /**
115 * drm_crtc_init - Legacy CRTC initialization function
116 * @dev: DRM device
117 * @crtc: CRTC object to init
118 * @funcs: callbacks for the new CRTC
119 *
120 * Initialize a CRTC object with a default helper-provided primary plane and no
121 * cursor plane.
122 *
123 * Note that we make some assumptions about hardware limitations that may not be
124 * true for all hardware:
125 *
126 * 1. Primary plane cannot be repositioned.
127 * 2. Primary plane cannot be scaled.
128 * 3. Primary plane must cover the entire CRTC.
129 * 4. Subpixel positioning is not supported.
130 * 5. The primary plane must always be on if the CRTC is enabled.
131 *
132 * This is purely a backwards compatibility helper for old drivers. Drivers
133 * should instead implement their own primary plane. Atomic drivers must do so.
134 * Drivers with the above hardware restriction can look into using &struct
135 * drm_simple_display_pipe, which encapsulates the above limitations into a nice
136 * interface.
137 *
138 * Returns:
139 * Zero on success, error code on failure.
140 */
drm_crtc_init(struct drm_device * dev,struct drm_crtc * crtc,const struct drm_crtc_funcs * funcs)141 int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
142 const struct drm_crtc_funcs *funcs)
143 {
144 struct drm_plane *primary;
145 int ret;
146
147 /* possible_crtc's will be filled in later by crtc_init */
148 primary = __drm_universal_plane_alloc(dev, sizeof(*primary), 0, 0,
149 &primary_plane_funcs,
150 safe_modeset_formats,
151 ARRAY_SIZE(safe_modeset_formats),
152 NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
153 if (IS_ERR(primary))
154 return PTR_ERR(primary);
155
156 /*
157 * Remove the format_default field from drm_plane when dropping
158 * this helper.
159 */
160 primary->format_default = true;
161
162 ret = drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs, NULL);
163 if (ret)
164 goto err_drm_plane_cleanup;
165
166 return 0;
167
168 err_drm_plane_cleanup:
169 drm_plane_cleanup(primary);
170 kfree(primary);
171 return ret;
172 }
173 EXPORT_SYMBOL(drm_crtc_init);
174
175 /**
176 * drm_mode_config_helper_suspend - Modeset suspend helper
177 * @dev: DRM device
178 *
179 * This helper function takes care of suspending the modeset side. It disables
180 * output polling if initialized, suspends fbdev if used and finally calls
181 * drm_atomic_helper_suspend().
182 * If suspending fails, fbdev and polling is re-enabled.
183 *
184 * Returns:
185 * Zero on success, negative error code on error.
186 *
187 * See also:
188 * drm_kms_helper_poll_disable() and drm_fb_helper_set_suspend_unlocked().
189 */
drm_mode_config_helper_suspend(struct drm_device * dev)190 int drm_mode_config_helper_suspend(struct drm_device *dev)
191 {
192 struct drm_atomic_state *state;
193
194 if (!dev)
195 return 0;
196
197 drm_kms_helper_poll_disable(dev);
198 drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 1);
199 state = drm_atomic_helper_suspend(dev);
200 if (IS_ERR(state)) {
201 drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0);
202 drm_kms_helper_poll_enable(dev);
203 return PTR_ERR(state);
204 }
205
206 dev->mode_config.suspend_state = state;
207
208 return 0;
209 }
210 EXPORT_SYMBOL(drm_mode_config_helper_suspend);
211
212 /**
213 * drm_mode_config_helper_resume - Modeset resume helper
214 * @dev: DRM device
215 *
216 * This helper function takes care of resuming the modeset side. It calls
217 * drm_atomic_helper_resume(), resumes fbdev if used and enables output polling
218 * if initiaized.
219 *
220 * Returns:
221 * Zero on success, negative error code on error.
222 *
223 * See also:
224 * drm_fb_helper_set_suspend_unlocked() and drm_kms_helper_poll_enable().
225 */
drm_mode_config_helper_resume(struct drm_device * dev)226 int drm_mode_config_helper_resume(struct drm_device *dev)
227 {
228 int ret;
229
230 if (!dev)
231 return 0;
232
233 if (WARN_ON(!dev->mode_config.suspend_state))
234 return -EINVAL;
235
236 ret = drm_atomic_helper_resume(dev, dev->mode_config.suspend_state);
237 if (ret)
238 DRM_ERROR("Failed to resume (%d)\n", ret);
239 dev->mode_config.suspend_state = NULL;
240
241 drm_fb_helper_set_suspend_unlocked(dev->fb_helper, 0);
242 drm_kms_helper_poll_enable(dev);
243
244 return ret;
245 }
246 EXPORT_SYMBOL(drm_mode_config_helper_resume);
247