1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	DEC I/O ASIC interrupts.
4  *
5  *	Copyright (c) 2002, 2003, 2013  Maciej W. Rozycki
6  */
7 
8 #include <linux/init.h>
9 #include <linux/irq.h>
10 #include <linux/types.h>
11 
12 #include <asm/dec/ioasic.h>
13 #include <asm/dec/ioasic_addrs.h>
14 #include <asm/dec/ioasic_ints.h>
15 
16 static int ioasic_irq_base;
17 
unmask_ioasic_irq(struct irq_data * d)18 static void unmask_ioasic_irq(struct irq_data *d)
19 {
20 	u32 simr;
21 
22 	simr = ioasic_read(IO_REG_SIMR);
23 	simr |= (1 << (d->irq - ioasic_irq_base));
24 	ioasic_write(IO_REG_SIMR, simr);
25 }
26 
mask_ioasic_irq(struct irq_data * d)27 static void mask_ioasic_irq(struct irq_data *d)
28 {
29 	u32 simr;
30 
31 	simr = ioasic_read(IO_REG_SIMR);
32 	simr &= ~(1 << (d->irq - ioasic_irq_base));
33 	ioasic_write(IO_REG_SIMR, simr);
34 }
35 
ack_ioasic_irq(struct irq_data * d)36 static void ack_ioasic_irq(struct irq_data *d)
37 {
38 	mask_ioasic_irq(d);
39 	fast_iob();
40 }
41 
42 static struct irq_chip ioasic_irq_type = {
43 	.name = "IO-ASIC",
44 	.irq_ack = ack_ioasic_irq,
45 	.irq_mask = mask_ioasic_irq,
46 	.irq_mask_ack = ack_ioasic_irq,
47 	.irq_unmask = unmask_ioasic_irq,
48 };
49 
clear_ioasic_dma_irq(struct irq_data * d)50 static void clear_ioasic_dma_irq(struct irq_data *d)
51 {
52 	u32 sir;
53 
54 	sir = ~(1 << (d->irq - ioasic_irq_base));
55 	ioasic_write(IO_REG_SIR, sir);
56 	fast_iob();
57 }
58 
59 static struct irq_chip ioasic_dma_irq_type = {
60 	.name = "IO-ASIC-DMA",
61 	.irq_ack = clear_ioasic_dma_irq,
62 	.irq_mask = mask_ioasic_irq,
63 	.irq_unmask = unmask_ioasic_irq,
64 	.irq_eoi = clear_ioasic_dma_irq,
65 };
66 
67 /*
68  * I/O ASIC implements two kinds of DMA interrupts, informational and
69  * error interrupts.
70  *
71  * The former do not stop DMA and should be cleared as soon as possible
72  * so that if they retrigger before the handler has completed, usually as
73  * a side effect of actions taken by the handler, then they are reissued.
74  * These use the `handle_edge_irq' handler that clears the request right
75  * away.
76  *
77  * The latter stop DMA and do not resume it until the interrupt has been
78  * cleared.  This cannot be done until after a corrective action has been
79  * taken and this also means they will not retrigger.  Therefore they use
80  * the `handle_fasteoi_irq' handler that only clears the request on the
81  * way out.  Because MIPS processor interrupt inputs, one of which the I/O
82  * ASIC is cascaded to, are level-triggered it is recommended that error
83  * DMA interrupt action handlers are registered with the IRQF_ONESHOT flag
84  * set so that they are run with the interrupt line masked.
85  *
86  * This mask has `1' bits in the positions of informational interrupts.
87  */
88 #define IO_IRQ_DMA_INFO							\
89 	(IO_IRQ_MASK(IO_INR_SCC0A_RXDMA) |				\
90 	 IO_IRQ_MASK(IO_INR_SCC1A_RXDMA) |				\
91 	 IO_IRQ_MASK(IO_INR_ISDN_TXDMA) |				\
92 	 IO_IRQ_MASK(IO_INR_ISDN_RXDMA) |				\
93 	 IO_IRQ_MASK(IO_INR_ASC_DMA))
94 
init_ioasic_irqs(int base)95 void __init init_ioasic_irqs(int base)
96 {
97 	int i;
98 
99 	/* Mask interrupts. */
100 	ioasic_write(IO_REG_SIMR, 0);
101 	fast_iob();
102 
103 	for (i = base; i < base + IO_INR_DMA; i++)
104 		irq_set_chip_and_handler(i, &ioasic_irq_type,
105 					 handle_level_irq);
106 	for (; i < base + IO_IRQ_LINES; i++)
107 		irq_set_chip_and_handler(i, &ioasic_dma_irq_type,
108 					 1 << (i - base) & IO_IRQ_DMA_INFO ?
109 					 handle_edge_irq : handle_fasteoi_irq);
110 
111 	ioasic_irq_base = base;
112 }
113