1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
4 *
5 * Current development and maintenance by:
6 * (c) 2000, 2001 Robert Baruch (autophile@starband.net)
7 * (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
8 *
9 * Developed with the assistance of:
10 * (c) 2002 Alan Stern <stern@rowland.org>
11 *
12 * Flash support based on earlier work by:
13 * (c) 2002 Thomas Kreiling <usbdev@sm04.de>
14 *
15 * Many originally ATAPI devices were slightly modified to meet the USB
16 * market by using some kind of translation from ATAPI to USB on the host,
17 * and the peripheral would translate from USB back to ATAPI.
18 *
19 * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only,
20 * which does the USB-to-ATAPI conversion. By obtaining the data sheet on
21 * their device under nondisclosure agreement, I have been able to write
22 * this driver for Linux.
23 *
24 * The chip used in the device can also be used for EPP and ISA translation
25 * as well. This driver is only guaranteed to work with the ATAPI
26 * translation.
27 *
28 * See the Kconfig help text for a list of devices known to be supported by
29 * this driver.
30 */
31
32 #include <linux/errno.h>
33 #include <linux/module.h>
34 #include <linux/slab.h>
35 #include <linux/cdrom.h>
36
37 #include <scsi/scsi.h>
38 #include <scsi/scsi_cmnd.h>
39
40 #include "usb.h"
41 #include "transport.h"
42 #include "protocol.h"
43 #include "debug.h"
44 #include "scsiglue.h"
45
46 #define DRV_NAME "ums-usbat"
47
48 MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
49 MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
50 MODULE_LICENSE("GPL");
51 MODULE_IMPORT_NS(USB_STORAGE);
52
53 /* Supported device types */
54 #define USBAT_DEV_HP8200 0x01
55 #define USBAT_DEV_FLASH 0x02
56
57 #define USBAT_EPP_PORT 0x10
58 #define USBAT_EPP_REGISTER 0x30
59 #define USBAT_ATA 0x40
60 #define USBAT_ISA 0x50
61
62 /* Commands (need to be logically OR'd with an access type */
63 #define USBAT_CMD_READ_REG 0x00
64 #define USBAT_CMD_WRITE_REG 0x01
65 #define USBAT_CMD_READ_BLOCK 0x02
66 #define USBAT_CMD_WRITE_BLOCK 0x03
67 #define USBAT_CMD_COND_READ_BLOCK 0x04
68 #define USBAT_CMD_COND_WRITE_BLOCK 0x05
69 #define USBAT_CMD_WRITE_REGS 0x07
70
71 /* Commands (these don't need an access type) */
72 #define USBAT_CMD_EXEC_CMD 0x80
73 #define USBAT_CMD_SET_FEAT 0x81
74 #define USBAT_CMD_UIO 0x82
75
76 /* Methods of accessing UIO register */
77 #define USBAT_UIO_READ 1
78 #define USBAT_UIO_WRITE 0
79
80 /* Qualifier bits */
81 #define USBAT_QUAL_FCQ 0x20 /* full compare */
82 #define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
83
84 /* USBAT Flash Media status types */
85 #define USBAT_FLASH_MEDIA_NONE 0
86 #define USBAT_FLASH_MEDIA_CF 1
87
88 /* USBAT Flash Media change types */
89 #define USBAT_FLASH_MEDIA_SAME 0
90 #define USBAT_FLASH_MEDIA_CHANGED 1
91
92 /* USBAT ATA registers */
93 #define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
94 #define USBAT_ATA_FEATURES 0x11 /* set features (W) */
95 #define USBAT_ATA_ERROR 0x11 /* error (R) */
96 #define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
97 #define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
98 #define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
99 #define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
100 #define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
101 #define USBAT_ATA_STATUS 0x17 /* device status (R) */
102 #define USBAT_ATA_CMD 0x17 /* device command (W) */
103 #define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
104
105 /* USBAT User I/O Data registers */
106 #define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
107 #define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
108 /* CDT = ACKD & !UI1 & !UI0 */
109 #define USBAT_UIO_1 0x20 /* I/O 1 */
110 #define USBAT_UIO_0 0x10 /* I/O 0 */
111 #define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
112 #define USBAT_UIO_UI1 0x04 /* Input 1 */
113 #define USBAT_UIO_UI0 0x02 /* Input 0 */
114 #define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
115
116 /* USBAT User I/O Enable registers */
117 #define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
118 #define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
119 #define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
120 /* If ACKD=1, set OE1 to 1 also. */
121 #define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
122 #define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
123
124 /* USBAT Features */
125 #define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
126 #define USBAT_FEAT_U1 0x08
127 #define USBAT_FEAT_U0 0x04
128 #define USBAT_FEAT_ET1 0x02
129 #define USBAT_FEAT_ET2 0x01
130
131 struct usbat_info {
132 int devicetype;
133
134 /* Used for Flash readers only */
135 unsigned long sectors; /* total sector count */
136 unsigned long ssize; /* sector size in bytes */
137
138 unsigned char sense_key;
139 unsigned long sense_asc; /* additional sense code */
140 unsigned long sense_ascq; /* additional sense code qualifier */
141 };
142
143 #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
144 #define LSB_of(s) ((s)&0xFF)
145 #define MSB_of(s) ((s)>>8)
146
147 static int transferred = 0;
148
149 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
150 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
151
152 static int init_usbat_cd(struct us_data *us);
153 static int init_usbat_flash(struct us_data *us);
154
155
156 /*
157 * The table of devices
158 */
159 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
160 vendorName, productName, useProtocol, useTransport, \
161 initFunction, flags) \
162 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
163 .driver_info = (flags) }
164
165 static struct usb_device_id usbat_usb_ids[] = {
166 # include "unusual_usbat.h"
167 { } /* Terminating entry */
168 };
169 MODULE_DEVICE_TABLE(usb, usbat_usb_ids);
170
171 #undef UNUSUAL_DEV
172
173 /*
174 * The flags table
175 */
176 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
177 vendor_name, product_name, use_protocol, use_transport, \
178 init_function, Flags) \
179 { \
180 .vendorName = vendor_name, \
181 .productName = product_name, \
182 .useProtocol = use_protocol, \
183 .useTransport = use_transport, \
184 .initFunction = init_function, \
185 }
186
187 static struct us_unusual_dev usbat_unusual_dev_list[] = {
188 # include "unusual_usbat.h"
189 { } /* Terminating entry */
190 };
191
192 #undef UNUSUAL_DEV
193
194 /*
195 * Convenience function to produce an ATA read/write sectors command
196 * Use cmd=0x20 for read, cmd=0x30 for write
197 */
usbat_pack_ata_sector_cmd(unsigned char * buf,unsigned char thistime,u32 sector,unsigned char cmd)198 static void usbat_pack_ata_sector_cmd(unsigned char *buf,
199 unsigned char thistime,
200 u32 sector, unsigned char cmd)
201 {
202 buf[0] = 0;
203 buf[1] = thistime;
204 buf[2] = sector & 0xFF;
205 buf[3] = (sector >> 8) & 0xFF;
206 buf[4] = (sector >> 16) & 0xFF;
207 buf[5] = 0xE0 | ((sector >> 24) & 0x0F);
208 buf[6] = cmd;
209 }
210
211 /*
212 * Convenience function to get the device type (flash or hp8200)
213 */
usbat_get_device_type(struct us_data * us)214 static int usbat_get_device_type(struct us_data *us)
215 {
216 return ((struct usbat_info*)us->extra)->devicetype;
217 }
218
219 /*
220 * Read a register from the device
221 */
usbat_read(struct us_data * us,unsigned char access,unsigned char reg,unsigned char * content)222 static int usbat_read(struct us_data *us,
223 unsigned char access,
224 unsigned char reg,
225 unsigned char *content)
226 {
227 return usb_stor_ctrl_transfer(us,
228 us->recv_ctrl_pipe,
229 access | USBAT_CMD_READ_REG,
230 0xC0,
231 (u16)reg,
232 0,
233 content,
234 1);
235 }
236
237 /*
238 * Write to a register on the device
239 */
usbat_write(struct us_data * us,unsigned char access,unsigned char reg,unsigned char content)240 static int usbat_write(struct us_data *us,
241 unsigned char access,
242 unsigned char reg,
243 unsigned char content)
244 {
245 return usb_stor_ctrl_transfer(us,
246 us->send_ctrl_pipe,
247 access | USBAT_CMD_WRITE_REG,
248 0x40,
249 short_pack(reg, content),
250 0,
251 NULL,
252 0);
253 }
254
255 /*
256 * Convenience function to perform a bulk read
257 */
usbat_bulk_read(struct us_data * us,void * buf,unsigned int len,int use_sg)258 static int usbat_bulk_read(struct us_data *us,
259 void* buf,
260 unsigned int len,
261 int use_sg)
262 {
263 if (len == 0)
264 return USB_STOR_XFER_GOOD;
265
266 usb_stor_dbg(us, "len = %d\n", len);
267 return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL);
268 }
269
270 /*
271 * Convenience function to perform a bulk write
272 */
usbat_bulk_write(struct us_data * us,void * buf,unsigned int len,int use_sg)273 static int usbat_bulk_write(struct us_data *us,
274 void* buf,
275 unsigned int len,
276 int use_sg)
277 {
278 if (len == 0)
279 return USB_STOR_XFER_GOOD;
280
281 usb_stor_dbg(us, "len = %d\n", len);
282 return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL);
283 }
284
285 /*
286 * Some USBAT-specific commands can only be executed over a command transport
287 * This transport allows one (len=8) or two (len=16) vendor-specific commands
288 * to be executed.
289 */
usbat_execute_command(struct us_data * us,unsigned char * commands,unsigned int len)290 static int usbat_execute_command(struct us_data *us,
291 unsigned char *commands,
292 unsigned int len)
293 {
294 return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
295 USBAT_CMD_EXEC_CMD, 0x40, 0, 0,
296 commands, len);
297 }
298
299 /*
300 * Read the status register
301 */
usbat_get_status(struct us_data * us,unsigned char * status)302 static int usbat_get_status(struct us_data *us, unsigned char *status)
303 {
304 int rc;
305 rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);
306
307 usb_stor_dbg(us, "0x%02X\n", *status);
308 return rc;
309 }
310
311 /*
312 * Check the device status
313 */
usbat_check_status(struct us_data * us)314 static int usbat_check_status(struct us_data *us)
315 {
316 unsigned char *reply = us->iobuf;
317 int rc;
318
319 rc = usbat_get_status(us, reply);
320 if (rc != USB_STOR_XFER_GOOD)
321 return USB_STOR_TRANSPORT_FAILED;
322
323 /* error/check condition (0x51 is ok) */
324 if (*reply & 0x01 && *reply != 0x51)
325 return USB_STOR_TRANSPORT_FAILED;
326
327 /* device fault */
328 if (*reply & 0x20)
329 return USB_STOR_TRANSPORT_FAILED;
330
331 return USB_STOR_TRANSPORT_GOOD;
332 }
333
334 /*
335 * Stores critical information in internal registers in preparation for the execution
336 * of a conditional usbat_read_blocks or usbat_write_blocks call.
337 */
usbat_set_shuttle_features(struct us_data * us,unsigned char external_trigger,unsigned char epp_control,unsigned char mask_byte,unsigned char test_pattern,unsigned char subcountH,unsigned char subcountL)338 static int usbat_set_shuttle_features(struct us_data *us,
339 unsigned char external_trigger,
340 unsigned char epp_control,
341 unsigned char mask_byte,
342 unsigned char test_pattern,
343 unsigned char subcountH,
344 unsigned char subcountL)
345 {
346 unsigned char *command = us->iobuf;
347
348 command[0] = 0x40;
349 command[1] = USBAT_CMD_SET_FEAT;
350
351 /*
352 * The only bit relevant to ATA access is bit 6
353 * which defines 8 bit data access (set) or 16 bit (unset)
354 */
355 command[2] = epp_control;
356
357 /*
358 * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
359 * ET1 and ET2 define an external event to be checked for on event of a
360 * _read_blocks or _write_blocks operation. The read/write will not take
361 * place unless the defined trigger signal is active.
362 */
363 command[3] = external_trigger;
364
365 /*
366 * The resultant byte of the mask operation (see mask_byte) is compared for
367 * equivalence with this test pattern. If equal, the read/write will take
368 * place.
369 */
370 command[4] = test_pattern;
371
372 /*
373 * This value is logically ANDed with the status register field specified
374 * in the read/write command.
375 */
376 command[5] = mask_byte;
377
378 /*
379 * If ALQ is set in the qualifier, this field contains the address of the
380 * registers where the byte count should be read for transferring the data.
381 * If ALQ is not set, then this field contains the number of bytes to be
382 * transferred.
383 */
384 command[6] = subcountL;
385 command[7] = subcountH;
386
387 return usbat_execute_command(us, command, 8);
388 }
389
390 /*
391 * Block, waiting for an ATA device to become not busy or to report
392 * an error condition.
393 */
usbat_wait_not_busy(struct us_data * us,int minutes)394 static int usbat_wait_not_busy(struct us_data *us, int minutes)
395 {
396 int i;
397 int result;
398 unsigned char *status = us->iobuf;
399
400 /*
401 * Synchronizing cache on a CDR could take a heck of a long time,
402 * but probably not more than 10 minutes or so. On the other hand,
403 * doing a full blank on a CDRW at speed 1 will take about 75
404 * minutes!
405 */
406
407 for (i=0; i<1200+minutes*60; i++) {
408
409 result = usbat_get_status(us, status);
410
411 if (result!=USB_STOR_XFER_GOOD)
412 return USB_STOR_TRANSPORT_ERROR;
413 if (*status & 0x01) { /* check condition */
414 result = usbat_read(us, USBAT_ATA, 0x10, status);
415 return USB_STOR_TRANSPORT_FAILED;
416 }
417 if (*status & 0x20) /* device fault */
418 return USB_STOR_TRANSPORT_FAILED;
419
420 if ((*status & 0x80)==0x00) { /* not busy */
421 usb_stor_dbg(us, "Waited not busy for %d steps\n", i);
422 return USB_STOR_TRANSPORT_GOOD;
423 }
424
425 if (i<500)
426 msleep(10); /* 5 seconds */
427 else if (i<700)
428 msleep(50); /* 10 seconds */
429 else if (i<1200)
430 msleep(100); /* 50 seconds */
431 else
432 msleep(1000); /* X minutes */
433 }
434
435 usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n",
436 minutes);
437 return USB_STOR_TRANSPORT_FAILED;
438 }
439
440 /*
441 * Read block data from the data register
442 */
usbat_read_block(struct us_data * us,void * buf,unsigned short len,int use_sg)443 static int usbat_read_block(struct us_data *us,
444 void* buf,
445 unsigned short len,
446 int use_sg)
447 {
448 int result;
449 unsigned char *command = us->iobuf;
450
451 if (!len)
452 return USB_STOR_TRANSPORT_GOOD;
453
454 command[0] = 0xC0;
455 command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK;
456 command[2] = USBAT_ATA_DATA;
457 command[3] = 0;
458 command[4] = 0;
459 command[5] = 0;
460 command[6] = LSB_of(len);
461 command[7] = MSB_of(len);
462
463 result = usbat_execute_command(us, command, 8);
464 if (result != USB_STOR_XFER_GOOD)
465 return USB_STOR_TRANSPORT_ERROR;
466
467 result = usbat_bulk_read(us, buf, len, use_sg);
468 return (result == USB_STOR_XFER_GOOD ?
469 USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
470 }
471
472 /*
473 * Write block data via the data register
474 */
usbat_write_block(struct us_data * us,unsigned char access,void * buf,unsigned short len,int minutes,int use_sg)475 static int usbat_write_block(struct us_data *us,
476 unsigned char access,
477 void* buf,
478 unsigned short len,
479 int minutes,
480 int use_sg)
481 {
482 int result;
483 unsigned char *command = us->iobuf;
484
485 if (!len)
486 return USB_STOR_TRANSPORT_GOOD;
487
488 command[0] = 0x40;
489 command[1] = access | USBAT_CMD_WRITE_BLOCK;
490 command[2] = USBAT_ATA_DATA;
491 command[3] = 0;
492 command[4] = 0;
493 command[5] = 0;
494 command[6] = LSB_of(len);
495 command[7] = MSB_of(len);
496
497 result = usbat_execute_command(us, command, 8);
498
499 if (result != USB_STOR_XFER_GOOD)
500 return USB_STOR_TRANSPORT_ERROR;
501
502 result = usbat_bulk_write(us, buf, len, use_sg);
503 if (result != USB_STOR_XFER_GOOD)
504 return USB_STOR_TRANSPORT_ERROR;
505
506 return usbat_wait_not_busy(us, minutes);
507 }
508
509 /*
510 * Process read and write requests
511 */
usbat_hp8200e_rw_block_test(struct us_data * us,unsigned char access,unsigned char * registers,unsigned char * data_out,unsigned short num_registers,unsigned char data_reg,unsigned char status_reg,unsigned char timeout,unsigned char qualifier,int direction,void * buf,unsigned short len,int use_sg,int minutes)512 static int usbat_hp8200e_rw_block_test(struct us_data *us,
513 unsigned char access,
514 unsigned char *registers,
515 unsigned char *data_out,
516 unsigned short num_registers,
517 unsigned char data_reg,
518 unsigned char status_reg,
519 unsigned char timeout,
520 unsigned char qualifier,
521 int direction,
522 void *buf,
523 unsigned short len,
524 int use_sg,
525 int minutes)
526 {
527 int result;
528 unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
529 us->recv_bulk_pipe : us->send_bulk_pipe;
530
531 unsigned char *command = us->iobuf;
532 int i, j;
533 int cmdlen;
534 unsigned char *data = us->iobuf;
535 unsigned char *status = us->iobuf;
536
537 BUG_ON(num_registers > US_IOBUF_SIZE/2);
538
539 for (i=0; i<20; i++) {
540
541 /*
542 * The first time we send the full command, which consists
543 * of downloading the SCSI command followed by downloading
544 * the data via a write-and-test. Any other time we only
545 * send the command to download the data -- the SCSI command
546 * is still 'active' in some sense in the device.
547 *
548 * We're only going to try sending the data 10 times. After
549 * that, we just return a failure.
550 */
551
552 if (i==0) {
553 cmdlen = 16;
554 /*
555 * Write to multiple registers
556 * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
557 * necessary here, but that's what came out of the
558 * trace every single time.
559 */
560 command[0] = 0x40;
561 command[1] = access | USBAT_CMD_WRITE_REGS;
562 command[2] = 0x07;
563 command[3] = 0x17;
564 command[4] = 0xFC;
565 command[5] = 0xE7;
566 command[6] = LSB_of(num_registers*2);
567 command[7] = MSB_of(num_registers*2);
568 } else
569 cmdlen = 8;
570
571 /* Conditionally read or write blocks */
572 command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
573 command[cmdlen-7] = access |
574 (direction==DMA_TO_DEVICE ?
575 USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK);
576 command[cmdlen-6] = data_reg;
577 command[cmdlen-5] = status_reg;
578 command[cmdlen-4] = timeout;
579 command[cmdlen-3] = qualifier;
580 command[cmdlen-2] = LSB_of(len);
581 command[cmdlen-1] = MSB_of(len);
582
583 result = usbat_execute_command(us, command, cmdlen);
584
585 if (result != USB_STOR_XFER_GOOD)
586 return USB_STOR_TRANSPORT_ERROR;
587
588 if (i==0) {
589
590 for (j=0; j<num_registers; j++) {
591 data[j<<1] = registers[j];
592 data[1+(j<<1)] = data_out[j];
593 }
594
595 result = usbat_bulk_write(us, data, num_registers*2, 0);
596 if (result != USB_STOR_XFER_GOOD)
597 return USB_STOR_TRANSPORT_ERROR;
598
599 }
600
601 result = usb_stor_bulk_transfer_sg(us,
602 pipe, buf, len, use_sg, NULL);
603
604 /*
605 * If we get a stall on the bulk download, we'll retry
606 * the bulk download -- but not the SCSI command because
607 * in some sense the SCSI command is still 'active' and
608 * waiting for the data. Don't ask me why this should be;
609 * I'm only following what the Windoze driver did.
610 *
611 * Note that a stall for the test-and-read/write command means
612 * that the test failed. In this case we're testing to make
613 * sure that the device is error-free
614 * (i.e. bit 0 -- CHK -- of status is 0). The most likely
615 * hypothesis is that the USBAT chip somehow knows what
616 * the device will accept, but doesn't give the device any
617 * data until all data is received. Thus, the device would
618 * still be waiting for the first byte of data if a stall
619 * occurs, even if the stall implies that some data was
620 * transferred.
621 */
622
623 if (result == USB_STOR_XFER_SHORT ||
624 result == USB_STOR_XFER_STALLED) {
625
626 /*
627 * If we're reading and we stalled, then clear
628 * the bulk output pipe only the first time.
629 */
630
631 if (direction==DMA_FROM_DEVICE && i==0) {
632 if (usb_stor_clear_halt(us,
633 us->send_bulk_pipe) < 0)
634 return USB_STOR_TRANSPORT_ERROR;
635 }
636
637 /*
638 * Read status: is the device angry, or just busy?
639 */
640
641 result = usbat_read(us, USBAT_ATA,
642 direction==DMA_TO_DEVICE ?
643 USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS,
644 status);
645
646 if (result!=USB_STOR_XFER_GOOD)
647 return USB_STOR_TRANSPORT_ERROR;
648 if (*status & 0x01) /* check condition */
649 return USB_STOR_TRANSPORT_FAILED;
650 if (*status & 0x20) /* device fault */
651 return USB_STOR_TRANSPORT_FAILED;
652
653 usb_stor_dbg(us, "Redoing %s\n",
654 direction == DMA_TO_DEVICE
655 ? "write" : "read");
656
657 } else if (result != USB_STOR_XFER_GOOD)
658 return USB_STOR_TRANSPORT_ERROR;
659 else
660 return usbat_wait_not_busy(us, minutes);
661
662 }
663
664 usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n",
665 direction == DMA_TO_DEVICE ? "Writing" : "Reading");
666
667 return USB_STOR_TRANSPORT_FAILED;
668 }
669
670 /*
671 * Write to multiple registers:
672 * Allows us to write specific data to any registers. The data to be written
673 * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN
674 * which gets sent through bulk out.
675 * Not designed for large transfers of data!
676 */
usbat_multiple_write(struct us_data * us,unsigned char * registers,unsigned char * data_out,unsigned short num_registers)677 static int usbat_multiple_write(struct us_data *us,
678 unsigned char *registers,
679 unsigned char *data_out,
680 unsigned short num_registers)
681 {
682 int i, result;
683 unsigned char *data = us->iobuf;
684 unsigned char *command = us->iobuf;
685
686 BUG_ON(num_registers > US_IOBUF_SIZE/2);
687
688 /* Write to multiple registers, ATA access */
689 command[0] = 0x40;
690 command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
691
692 /* No relevance */
693 command[2] = 0;
694 command[3] = 0;
695 command[4] = 0;
696 command[5] = 0;
697
698 /* Number of bytes to be transferred (incl. addresses and data) */
699 command[6] = LSB_of(num_registers*2);
700 command[7] = MSB_of(num_registers*2);
701
702 /* The setup command */
703 result = usbat_execute_command(us, command, 8);
704 if (result != USB_STOR_XFER_GOOD)
705 return USB_STOR_TRANSPORT_ERROR;
706
707 /* Create the reg/data, reg/data sequence */
708 for (i=0; i<num_registers; i++) {
709 data[i<<1] = registers[i];
710 data[1+(i<<1)] = data_out[i];
711 }
712
713 /* Send the data */
714 result = usbat_bulk_write(us, data, num_registers*2, 0);
715 if (result != USB_STOR_XFER_GOOD)
716 return USB_STOR_TRANSPORT_ERROR;
717
718 if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
719 return usbat_wait_not_busy(us, 0);
720 else
721 return USB_STOR_TRANSPORT_GOOD;
722 }
723
724 /*
725 * Conditionally read blocks from device:
726 * Allows us to read blocks from a specific data register, based upon the
727 * condition that a status register can be successfully masked with a status
728 * qualifier. If this condition is not initially met, the read will wait
729 * up until a maximum amount of time has elapsed, as specified by timeout.
730 * The read will start when the condition is met, otherwise the command aborts.
731 *
732 * The qualifier defined here is not the value that is masked, it defines
733 * conditions for the write to take place. The actual masked qualifier (and
734 * other related details) are defined beforehand with _set_shuttle_features().
735 */
usbat_read_blocks(struct us_data * us,void * buffer,int len,int use_sg)736 static int usbat_read_blocks(struct us_data *us,
737 void* buffer,
738 int len,
739 int use_sg)
740 {
741 int result;
742 unsigned char *command = us->iobuf;
743
744 command[0] = 0xC0;
745 command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
746 command[2] = USBAT_ATA_DATA;
747 command[3] = USBAT_ATA_STATUS;
748 command[4] = 0xFD; /* Timeout (ms); */
749 command[5] = USBAT_QUAL_FCQ;
750 command[6] = LSB_of(len);
751 command[7] = MSB_of(len);
752
753 /* Multiple block read setup command */
754 result = usbat_execute_command(us, command, 8);
755 if (result != USB_STOR_XFER_GOOD)
756 return USB_STOR_TRANSPORT_FAILED;
757
758 /* Read the blocks we just asked for */
759 result = usbat_bulk_read(us, buffer, len, use_sg);
760 if (result != USB_STOR_XFER_GOOD)
761 return USB_STOR_TRANSPORT_FAILED;
762
763 return USB_STOR_TRANSPORT_GOOD;
764 }
765
766 /*
767 * Conditionally write blocks to device:
768 * Allows us to write blocks to a specific data register, based upon the
769 * condition that a status register can be successfully masked with a status
770 * qualifier. If this condition is not initially met, the write will wait
771 * up until a maximum amount of time has elapsed, as specified by timeout.
772 * The read will start when the condition is met, otherwise the command aborts.
773 *
774 * The qualifier defined here is not the value that is masked, it defines
775 * conditions for the write to take place. The actual masked qualifier (and
776 * other related details) are defined beforehand with _set_shuttle_features().
777 */
usbat_write_blocks(struct us_data * us,void * buffer,int len,int use_sg)778 static int usbat_write_blocks(struct us_data *us,
779 void* buffer,
780 int len,
781 int use_sg)
782 {
783 int result;
784 unsigned char *command = us->iobuf;
785
786 command[0] = 0x40;
787 command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
788 command[2] = USBAT_ATA_DATA;
789 command[3] = USBAT_ATA_STATUS;
790 command[4] = 0xFD; /* Timeout (ms) */
791 command[5] = USBAT_QUAL_FCQ;
792 command[6] = LSB_of(len);
793 command[7] = MSB_of(len);
794
795 /* Multiple block write setup command */
796 result = usbat_execute_command(us, command, 8);
797 if (result != USB_STOR_XFER_GOOD)
798 return USB_STOR_TRANSPORT_FAILED;
799
800 /* Write the data */
801 result = usbat_bulk_write(us, buffer, len, use_sg);
802 if (result != USB_STOR_XFER_GOOD)
803 return USB_STOR_TRANSPORT_FAILED;
804
805 return USB_STOR_TRANSPORT_GOOD;
806 }
807
808 /*
809 * Read the User IO register
810 */
usbat_read_user_io(struct us_data * us,unsigned char * data_flags)811 static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags)
812 {
813 int result;
814
815 result = usb_stor_ctrl_transfer(us,
816 us->recv_ctrl_pipe,
817 USBAT_CMD_UIO,
818 0xC0,
819 0,
820 0,
821 data_flags,
822 USBAT_UIO_READ);
823
824 usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags);
825
826 return result;
827 }
828
829 /*
830 * Write to the User IO register
831 */
usbat_write_user_io(struct us_data * us,unsigned char enable_flags,unsigned char data_flags)832 static int usbat_write_user_io(struct us_data *us,
833 unsigned char enable_flags,
834 unsigned char data_flags)
835 {
836 return usb_stor_ctrl_transfer(us,
837 us->send_ctrl_pipe,
838 USBAT_CMD_UIO,
839 0x40,
840 short_pack(enable_flags, data_flags),
841 0,
842 NULL,
843 USBAT_UIO_WRITE);
844 }
845
846 /*
847 * Reset the device
848 * Often needed on media change.
849 */
usbat_device_reset(struct us_data * us)850 static int usbat_device_reset(struct us_data *us)
851 {
852 int rc;
853
854 /*
855 * Reset peripheral, enable peripheral control signals
856 * (bring reset signal up)
857 */
858 rc = usbat_write_user_io(us,
859 USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
860 USBAT_UIO_EPAD | USBAT_UIO_1);
861 if (rc != USB_STOR_XFER_GOOD)
862 return USB_STOR_TRANSPORT_ERROR;
863
864 /*
865 * Enable peripheral control signals
866 * (bring reset signal down)
867 */
868 rc = usbat_write_user_io(us,
869 USBAT_UIO_OE1 | USBAT_UIO_OE0,
870 USBAT_UIO_EPAD | USBAT_UIO_1);
871 if (rc != USB_STOR_XFER_GOOD)
872 return USB_STOR_TRANSPORT_ERROR;
873
874 return USB_STOR_TRANSPORT_GOOD;
875 }
876
877 /*
878 * Enable card detect
879 */
usbat_device_enable_cdt(struct us_data * us)880 static int usbat_device_enable_cdt(struct us_data *us)
881 {
882 int rc;
883
884 /* Enable peripheral control signals and card detect */
885 rc = usbat_write_user_io(us,
886 USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
887 USBAT_UIO_EPAD | USBAT_UIO_1);
888 if (rc != USB_STOR_XFER_GOOD)
889 return USB_STOR_TRANSPORT_ERROR;
890
891 return USB_STOR_TRANSPORT_GOOD;
892 }
893
894 /*
895 * Determine if media is present.
896 */
usbat_flash_check_media_present(struct us_data * us,unsigned char * uio)897 static int usbat_flash_check_media_present(struct us_data *us,
898 unsigned char *uio)
899 {
900 if (*uio & USBAT_UIO_UI0) {
901 usb_stor_dbg(us, "no media detected\n");
902 return USBAT_FLASH_MEDIA_NONE;
903 }
904
905 return USBAT_FLASH_MEDIA_CF;
906 }
907
908 /*
909 * Determine if media has changed since last operation
910 */
usbat_flash_check_media_changed(struct us_data * us,unsigned char * uio)911 static int usbat_flash_check_media_changed(struct us_data *us,
912 unsigned char *uio)
913 {
914 if (*uio & USBAT_UIO_0) {
915 usb_stor_dbg(us, "media change detected\n");
916 return USBAT_FLASH_MEDIA_CHANGED;
917 }
918
919 return USBAT_FLASH_MEDIA_SAME;
920 }
921
922 /*
923 * Check for media change / no media and handle the situation appropriately
924 */
usbat_flash_check_media(struct us_data * us,struct usbat_info * info)925 static int usbat_flash_check_media(struct us_data *us,
926 struct usbat_info *info)
927 {
928 int rc;
929 unsigned char *uio = us->iobuf;
930
931 rc = usbat_read_user_io(us, uio);
932 if (rc != USB_STOR_XFER_GOOD)
933 return USB_STOR_TRANSPORT_ERROR;
934
935 /* Check for media existence */
936 rc = usbat_flash_check_media_present(us, uio);
937 if (rc == USBAT_FLASH_MEDIA_NONE) {
938 info->sense_key = 0x02;
939 info->sense_asc = 0x3A;
940 info->sense_ascq = 0x00;
941 return USB_STOR_TRANSPORT_FAILED;
942 }
943
944 /* Check for media change */
945 rc = usbat_flash_check_media_changed(us, uio);
946 if (rc == USBAT_FLASH_MEDIA_CHANGED) {
947
948 /* Reset and re-enable card detect */
949 rc = usbat_device_reset(us);
950 if (rc != USB_STOR_TRANSPORT_GOOD)
951 return rc;
952 rc = usbat_device_enable_cdt(us);
953 if (rc != USB_STOR_TRANSPORT_GOOD)
954 return rc;
955
956 msleep(50);
957
958 rc = usbat_read_user_io(us, uio);
959 if (rc != USB_STOR_XFER_GOOD)
960 return USB_STOR_TRANSPORT_ERROR;
961
962 info->sense_key = UNIT_ATTENTION;
963 info->sense_asc = 0x28;
964 info->sense_ascq = 0x00;
965 return USB_STOR_TRANSPORT_FAILED;
966 }
967
968 return USB_STOR_TRANSPORT_GOOD;
969 }
970
971 /*
972 * Determine whether we are controlling a flash-based reader/writer,
973 * or a HP8200-based CD drive.
974 * Sets transport functions as appropriate.
975 */
usbat_identify_device(struct us_data * us,struct usbat_info * info)976 static int usbat_identify_device(struct us_data *us,
977 struct usbat_info *info)
978 {
979 int rc;
980 unsigned char status;
981
982 if (!us || !info)
983 return USB_STOR_TRANSPORT_ERROR;
984
985 rc = usbat_device_reset(us);
986 if (rc != USB_STOR_TRANSPORT_GOOD)
987 return rc;
988 msleep(500);
989
990 /*
991 * In attempt to distinguish between HP CDRW's and Flash readers, we now
992 * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
993 * readers), this command should fail with error. On ATAPI devices (i.e.
994 * CDROM drives), it should succeed.
995 */
996 rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
997 if (rc != USB_STOR_XFER_GOOD)
998 return USB_STOR_TRANSPORT_ERROR;
999
1000 rc = usbat_get_status(us, &status);
1001 if (rc != USB_STOR_XFER_GOOD)
1002 return USB_STOR_TRANSPORT_ERROR;
1003
1004 /* Check for error bit, or if the command 'fell through' */
1005 if (status == 0xA1 || !(status & 0x01)) {
1006 /* Device is HP 8200 */
1007 usb_stor_dbg(us, "Detected HP8200 CDRW\n");
1008 info->devicetype = USBAT_DEV_HP8200;
1009 } else {
1010 /* Device is a CompactFlash reader/writer */
1011 usb_stor_dbg(us, "Detected Flash reader/writer\n");
1012 info->devicetype = USBAT_DEV_FLASH;
1013 }
1014
1015 return USB_STOR_TRANSPORT_GOOD;
1016 }
1017
1018 /*
1019 * Set the transport function based on the device type
1020 */
usbat_set_transport(struct us_data * us,struct usbat_info * info,int devicetype)1021 static int usbat_set_transport(struct us_data *us,
1022 struct usbat_info *info,
1023 int devicetype)
1024 {
1025
1026 if (!info->devicetype)
1027 info->devicetype = devicetype;
1028
1029 if (!info->devicetype)
1030 usbat_identify_device(us, info);
1031
1032 switch (info->devicetype) {
1033 default:
1034 return USB_STOR_TRANSPORT_ERROR;
1035
1036 case USBAT_DEV_HP8200:
1037 us->transport = usbat_hp8200e_transport;
1038 break;
1039
1040 case USBAT_DEV_FLASH:
1041 us->transport = usbat_flash_transport;
1042 break;
1043 }
1044
1045 return 0;
1046 }
1047
1048 /*
1049 * Read the media capacity
1050 */
usbat_flash_get_sector_count(struct us_data * us,struct usbat_info * info)1051 static int usbat_flash_get_sector_count(struct us_data *us,
1052 struct usbat_info *info)
1053 {
1054 unsigned char registers[3] = {
1055 USBAT_ATA_SECCNT,
1056 USBAT_ATA_DEVICE,
1057 USBAT_ATA_CMD,
1058 };
1059 unsigned char command[3] = { 0x01, 0xA0, 0xEC };
1060 unsigned char *reply;
1061 unsigned char status;
1062 int rc;
1063
1064 if (!us || !info)
1065 return USB_STOR_TRANSPORT_ERROR;
1066
1067 reply = kmalloc(512, GFP_NOIO);
1068 if (!reply)
1069 return USB_STOR_TRANSPORT_ERROR;
1070
1071 /* ATA command : IDENTIFY DEVICE */
1072 rc = usbat_multiple_write(us, registers, command, 3);
1073 if (rc != USB_STOR_XFER_GOOD) {
1074 usb_stor_dbg(us, "Gah! identify_device failed\n");
1075 rc = USB_STOR_TRANSPORT_ERROR;
1076 goto leave;
1077 }
1078
1079 /* Read device status */
1080 if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
1081 rc = USB_STOR_TRANSPORT_ERROR;
1082 goto leave;
1083 }
1084
1085 msleep(100);
1086
1087 /* Read the device identification data */
1088 rc = usbat_read_block(us, reply, 512, 0);
1089 if (rc != USB_STOR_TRANSPORT_GOOD)
1090 goto leave;
1091
1092 info->sectors = ((u32)(reply[117]) << 24) |
1093 ((u32)(reply[116]) << 16) |
1094 ((u32)(reply[115]) << 8) |
1095 ((u32)(reply[114]) );
1096
1097 rc = USB_STOR_TRANSPORT_GOOD;
1098
1099 leave:
1100 kfree(reply);
1101 return rc;
1102 }
1103
1104 /*
1105 * Read data from device
1106 */
usbat_flash_read_data(struct us_data * us,struct usbat_info * info,u32 sector,u32 sectors)1107 static int usbat_flash_read_data(struct us_data *us,
1108 struct usbat_info *info,
1109 u32 sector,
1110 u32 sectors)
1111 {
1112 unsigned char registers[7] = {
1113 USBAT_ATA_FEATURES,
1114 USBAT_ATA_SECCNT,
1115 USBAT_ATA_SECNUM,
1116 USBAT_ATA_LBA_ME,
1117 USBAT_ATA_LBA_HI,
1118 USBAT_ATA_DEVICE,
1119 USBAT_ATA_STATUS,
1120 };
1121 unsigned char command[7];
1122 unsigned char *buffer;
1123 unsigned char thistime;
1124 unsigned int totallen, alloclen;
1125 int len, result;
1126 unsigned int sg_offset = 0;
1127 struct scatterlist *sg = NULL;
1128
1129 result = usbat_flash_check_media(us, info);
1130 if (result != USB_STOR_TRANSPORT_GOOD)
1131 return result;
1132
1133 /*
1134 * we're working in LBA mode. according to the ATA spec,
1135 * we can support up to 28-bit addressing. I don't know if Jumpshot
1136 * supports beyond 24-bit addressing. It's kind of hard to test
1137 * since it requires > 8GB CF card.
1138 */
1139
1140 if (sector > 0x0FFFFFFF)
1141 return USB_STOR_TRANSPORT_ERROR;
1142
1143 totallen = sectors * info->ssize;
1144
1145 /*
1146 * Since we don't read more than 64 KB at a time, we have to create
1147 * a bounce buffer and move the data a piece at a time between the
1148 * bounce buffer and the actual transfer buffer.
1149 */
1150
1151 alloclen = min(totallen, 65536u);
1152 buffer = kmalloc(alloclen, GFP_NOIO);
1153 if (buffer == NULL)
1154 return USB_STOR_TRANSPORT_ERROR;
1155
1156 do {
1157 /*
1158 * loop, never allocate or transfer more than 64k at once
1159 * (min(128k, 255*info->ssize) is the real limit)
1160 */
1161 len = min(totallen, alloclen);
1162 thistime = (len / info->ssize) & 0xff;
1163
1164 /* ATA command 0x20 (READ SECTORS) */
1165 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
1166
1167 /* Write/execute ATA read command */
1168 result = usbat_multiple_write(us, registers, command, 7);
1169 if (result != USB_STOR_TRANSPORT_GOOD)
1170 goto leave;
1171
1172 /* Read the data we just requested */
1173 result = usbat_read_blocks(us, buffer, len, 0);
1174 if (result != USB_STOR_TRANSPORT_GOOD)
1175 goto leave;
1176
1177 usb_stor_dbg(us, "%d bytes\n", len);
1178
1179 /* Store the data in the transfer buffer */
1180 usb_stor_access_xfer_buf(buffer, len, us->srb,
1181 &sg, &sg_offset, TO_XFER_BUF);
1182
1183 sector += thistime;
1184 totallen -= len;
1185 } while (totallen > 0);
1186
1187 kfree(buffer);
1188 return USB_STOR_TRANSPORT_GOOD;
1189
1190 leave:
1191 kfree(buffer);
1192 return USB_STOR_TRANSPORT_ERROR;
1193 }
1194
1195 /*
1196 * Write data to device
1197 */
usbat_flash_write_data(struct us_data * us,struct usbat_info * info,u32 sector,u32 sectors)1198 static int usbat_flash_write_data(struct us_data *us,
1199 struct usbat_info *info,
1200 u32 sector,
1201 u32 sectors)
1202 {
1203 unsigned char registers[7] = {
1204 USBAT_ATA_FEATURES,
1205 USBAT_ATA_SECCNT,
1206 USBAT_ATA_SECNUM,
1207 USBAT_ATA_LBA_ME,
1208 USBAT_ATA_LBA_HI,
1209 USBAT_ATA_DEVICE,
1210 USBAT_ATA_STATUS,
1211 };
1212 unsigned char command[7];
1213 unsigned char *buffer;
1214 unsigned char thistime;
1215 unsigned int totallen, alloclen;
1216 int len, result;
1217 unsigned int sg_offset = 0;
1218 struct scatterlist *sg = NULL;
1219
1220 result = usbat_flash_check_media(us, info);
1221 if (result != USB_STOR_TRANSPORT_GOOD)
1222 return result;
1223
1224 /*
1225 * we're working in LBA mode. according to the ATA spec,
1226 * we can support up to 28-bit addressing. I don't know if the device
1227 * supports beyond 24-bit addressing. It's kind of hard to test
1228 * since it requires > 8GB media.
1229 */
1230
1231 if (sector > 0x0FFFFFFF)
1232 return USB_STOR_TRANSPORT_ERROR;
1233
1234 totallen = sectors * info->ssize;
1235
1236 /*
1237 * Since we don't write more than 64 KB at a time, we have to create
1238 * a bounce buffer and move the data a piece at a time between the
1239 * bounce buffer and the actual transfer buffer.
1240 */
1241
1242 alloclen = min(totallen, 65536u);
1243 buffer = kmalloc(alloclen, GFP_NOIO);
1244 if (buffer == NULL)
1245 return USB_STOR_TRANSPORT_ERROR;
1246
1247 do {
1248 /*
1249 * loop, never allocate or transfer more than 64k at once
1250 * (min(128k, 255*info->ssize) is the real limit)
1251 */
1252 len = min(totallen, alloclen);
1253 thistime = (len / info->ssize) & 0xff;
1254
1255 /* Get the data from the transfer buffer */
1256 usb_stor_access_xfer_buf(buffer, len, us->srb,
1257 &sg, &sg_offset, FROM_XFER_BUF);
1258
1259 /* ATA command 0x30 (WRITE SECTORS) */
1260 usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
1261
1262 /* Write/execute ATA write command */
1263 result = usbat_multiple_write(us, registers, command, 7);
1264 if (result != USB_STOR_TRANSPORT_GOOD)
1265 goto leave;
1266
1267 /* Write the data */
1268 result = usbat_write_blocks(us, buffer, len, 0);
1269 if (result != USB_STOR_TRANSPORT_GOOD)
1270 goto leave;
1271
1272 sector += thistime;
1273 totallen -= len;
1274 } while (totallen > 0);
1275
1276 kfree(buffer);
1277 return result;
1278
1279 leave:
1280 kfree(buffer);
1281 return USB_STOR_TRANSPORT_ERROR;
1282 }
1283
1284 /*
1285 * Squeeze a potentially huge (> 65535 byte) read10 command into
1286 * a little ( <= 65535 byte) ATAPI pipe
1287 */
usbat_hp8200e_handle_read10(struct us_data * us,unsigned char * registers,unsigned char * data,struct scsi_cmnd * srb)1288 static int usbat_hp8200e_handle_read10(struct us_data *us,
1289 unsigned char *registers,
1290 unsigned char *data,
1291 struct scsi_cmnd *srb)
1292 {
1293 int result = USB_STOR_TRANSPORT_GOOD;
1294 unsigned char *buffer;
1295 unsigned int len;
1296 unsigned int sector;
1297 unsigned int sg_offset = 0;
1298 struct scatterlist *sg = NULL;
1299
1300 usb_stor_dbg(us, "transfersize %d\n", srb->transfersize);
1301
1302 if (scsi_bufflen(srb) < 0x10000) {
1303
1304 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
1305 registers, data, 19,
1306 USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
1307 (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
1308 DMA_FROM_DEVICE,
1309 scsi_sglist(srb),
1310 scsi_bufflen(srb), scsi_sg_count(srb), 1);
1311
1312 return result;
1313 }
1314
1315 /*
1316 * Since we're requesting more data than we can handle in
1317 * a single read command (max is 64k-1), we will perform
1318 * multiple reads, but each read must be in multiples of
1319 * a sector. Luckily the sector size is in srb->transfersize
1320 * (see linux/drivers/scsi/sr.c).
1321 */
1322
1323 if (data[7+0] == GPCMD_READ_CD) {
1324 len = short_pack(data[7+9], data[7+8]);
1325 len <<= 16;
1326 len |= data[7+7];
1327 usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len);
1328 srb->transfersize = scsi_bufflen(srb)/len;
1329 }
1330
1331 if (!srb->transfersize) {
1332 srb->transfersize = 2048; /* A guess */
1333 usb_stor_dbg(us, "transfersize 0, forcing %d\n",
1334 srb->transfersize);
1335 }
1336
1337 /*
1338 * Since we only read in one block at a time, we have to create
1339 * a bounce buffer and move the data a piece at a time between the
1340 * bounce buffer and the actual transfer buffer.
1341 */
1342
1343 len = (65535/srb->transfersize) * srb->transfersize;
1344 usb_stor_dbg(us, "Max read is %d bytes\n", len);
1345 len = min(len, scsi_bufflen(srb));
1346 buffer = kmalloc(len, GFP_NOIO);
1347 if (buffer == NULL) /* bloody hell! */
1348 return USB_STOR_TRANSPORT_FAILED;
1349 sector = short_pack(data[7+3], data[7+2]);
1350 sector <<= 16;
1351 sector |= short_pack(data[7+5], data[7+4]);
1352 transferred = 0;
1353
1354 while (transferred != scsi_bufflen(srb)) {
1355
1356 if (len > scsi_bufflen(srb) - transferred)
1357 len = scsi_bufflen(srb) - transferred;
1358
1359 data[3] = len&0xFF; /* (cylL) = expected length (L) */
1360 data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
1361
1362 /* Fix up the SCSI command sector and num sectors */
1363
1364 data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
1365 data[7+3] = LSB_of(sector>>16);
1366 data[7+4] = MSB_of(sector&0xFFFF);
1367 data[7+5] = LSB_of(sector&0xFFFF);
1368 if (data[7+0] == GPCMD_READ_CD)
1369 data[7+6] = 0;
1370 data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
1371 data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
1372
1373 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
1374 registers, data, 19,
1375 USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
1376 (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
1377 DMA_FROM_DEVICE,
1378 buffer,
1379 len, 0, 1);
1380
1381 if (result != USB_STOR_TRANSPORT_GOOD)
1382 break;
1383
1384 /* Store the data in the transfer buffer */
1385 usb_stor_access_xfer_buf(buffer, len, srb,
1386 &sg, &sg_offset, TO_XFER_BUF);
1387
1388 /* Update the amount transferred and the sector number */
1389
1390 transferred += len;
1391 sector += len / srb->transfersize;
1392
1393 } /* while transferred != scsi_bufflen(srb) */
1394
1395 kfree(buffer);
1396 return result;
1397 }
1398
usbat_select_and_test_registers(struct us_data * us)1399 static int usbat_select_and_test_registers(struct us_data *us)
1400 {
1401 int selector;
1402 unsigned char *status = us->iobuf;
1403
1404 /* try device = master, then device = slave. */
1405 for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
1406 if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
1407 USB_STOR_XFER_GOOD)
1408 return USB_STOR_TRANSPORT_ERROR;
1409
1410 if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) !=
1411 USB_STOR_XFER_GOOD)
1412 return USB_STOR_TRANSPORT_ERROR;
1413
1414 if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) !=
1415 USB_STOR_XFER_GOOD)
1416 return USB_STOR_TRANSPORT_ERROR;
1417
1418 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1419 USB_STOR_XFER_GOOD)
1420 return USB_STOR_TRANSPORT_ERROR;
1421
1422 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
1423 USB_STOR_XFER_GOOD)
1424 return USB_STOR_TRANSPORT_ERROR;
1425
1426 if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) !=
1427 USB_STOR_XFER_GOOD)
1428 return USB_STOR_TRANSPORT_ERROR;
1429
1430 if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) !=
1431 USB_STOR_XFER_GOOD)
1432 return USB_STOR_TRANSPORT_ERROR;
1433
1434 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1435 USB_STOR_XFER_GOOD)
1436 return USB_STOR_TRANSPORT_ERROR;
1437
1438 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1439 USB_STOR_XFER_GOOD)
1440 return USB_STOR_TRANSPORT_ERROR;
1441 }
1442
1443 return USB_STOR_TRANSPORT_GOOD;
1444 }
1445
1446 /*
1447 * Initialize the USBAT processor and the storage device
1448 */
init_usbat(struct us_data * us,int devicetype)1449 static int init_usbat(struct us_data *us, int devicetype)
1450 {
1451 int rc;
1452 struct usbat_info *info;
1453 unsigned char subcountH = USBAT_ATA_LBA_HI;
1454 unsigned char subcountL = USBAT_ATA_LBA_ME;
1455 unsigned char *status = us->iobuf;
1456
1457 us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO);
1458 if (!us->extra)
1459 return -ENOMEM;
1460
1461 info = (struct usbat_info *) (us->extra);
1462
1463 /* Enable peripheral control signals */
1464 rc = usbat_write_user_io(us,
1465 USBAT_UIO_OE1 | USBAT_UIO_OE0,
1466 USBAT_UIO_EPAD | USBAT_UIO_1);
1467 if (rc != USB_STOR_XFER_GOOD)
1468 return -EIO;
1469
1470 usb_stor_dbg(us, "INIT 1\n");
1471
1472 msleep(2000);
1473
1474 rc = usbat_read_user_io(us, status);
1475 if (rc != USB_STOR_TRANSPORT_GOOD)
1476 return -EIO;
1477
1478 usb_stor_dbg(us, "INIT 2\n");
1479
1480 rc = usbat_read_user_io(us, status);
1481 if (rc != USB_STOR_XFER_GOOD)
1482 return -EIO;
1483
1484 rc = usbat_read_user_io(us, status);
1485 if (rc != USB_STOR_XFER_GOOD)
1486 return -EIO;
1487
1488 usb_stor_dbg(us, "INIT 3\n");
1489
1490 rc = usbat_select_and_test_registers(us);
1491 if (rc != USB_STOR_TRANSPORT_GOOD)
1492 return -EIO;
1493
1494 usb_stor_dbg(us, "INIT 4\n");
1495
1496 rc = usbat_read_user_io(us, status);
1497 if (rc != USB_STOR_XFER_GOOD)
1498 return -EIO;
1499
1500 usb_stor_dbg(us, "INIT 5\n");
1501
1502 /* Enable peripheral control signals and card detect */
1503 rc = usbat_device_enable_cdt(us);
1504 if (rc != USB_STOR_TRANSPORT_GOOD)
1505 return -EIO;
1506
1507 usb_stor_dbg(us, "INIT 6\n");
1508
1509 rc = usbat_read_user_io(us, status);
1510 if (rc != USB_STOR_XFER_GOOD)
1511 return -EIO;
1512
1513 usb_stor_dbg(us, "INIT 7\n");
1514
1515 msleep(1400);
1516
1517 rc = usbat_read_user_io(us, status);
1518 if (rc != USB_STOR_XFER_GOOD)
1519 return -EIO;
1520
1521 usb_stor_dbg(us, "INIT 8\n");
1522
1523 rc = usbat_select_and_test_registers(us);
1524 if (rc != USB_STOR_TRANSPORT_GOOD)
1525 return -EIO;
1526
1527 usb_stor_dbg(us, "INIT 9\n");
1528
1529 /* At this point, we need to detect which device we are using */
1530 if (usbat_set_transport(us, info, devicetype))
1531 return -EIO;
1532
1533 usb_stor_dbg(us, "INIT 10\n");
1534
1535 if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
1536 subcountH = 0x02;
1537 subcountL = 0x00;
1538 }
1539 rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1),
1540 0x00, 0x88, 0x08, subcountH, subcountL);
1541 if (rc != USB_STOR_XFER_GOOD)
1542 return -EIO;
1543
1544 usb_stor_dbg(us, "INIT 11\n");
1545
1546 return 0;
1547 }
1548
1549 /*
1550 * Transport for the HP 8200e
1551 */
usbat_hp8200e_transport(struct scsi_cmnd * srb,struct us_data * us)1552 static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
1553 {
1554 int result;
1555 unsigned char *status = us->iobuf;
1556 unsigned char registers[32];
1557 unsigned char data[32];
1558 unsigned int len;
1559 int i;
1560
1561 len = scsi_bufflen(srb);
1562
1563 /*
1564 * Send A0 (ATA PACKET COMMAND).
1565 * Note: I guess we're never going to get any of the ATA
1566 * commands... just ATA Packet Commands.
1567 */
1568
1569 registers[0] = USBAT_ATA_FEATURES;
1570 registers[1] = USBAT_ATA_SECCNT;
1571 registers[2] = USBAT_ATA_SECNUM;
1572 registers[3] = USBAT_ATA_LBA_ME;
1573 registers[4] = USBAT_ATA_LBA_HI;
1574 registers[5] = USBAT_ATA_DEVICE;
1575 registers[6] = USBAT_ATA_CMD;
1576 data[0] = 0x00;
1577 data[1] = 0x00;
1578 data[2] = 0x00;
1579 data[3] = len&0xFF; /* (cylL) = expected length (L) */
1580 data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
1581 data[5] = 0xB0; /* (device sel) = slave */
1582 data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
1583
1584 for (i=7; i<19; i++) {
1585 registers[i] = 0x10;
1586 data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7];
1587 }
1588
1589 result = usbat_get_status(us, status);
1590 usb_stor_dbg(us, "Status = %02X\n", *status);
1591 if (result != USB_STOR_XFER_GOOD)
1592 return USB_STOR_TRANSPORT_ERROR;
1593 if (srb->cmnd[0] == TEST_UNIT_READY)
1594 transferred = 0;
1595
1596 if (srb->sc_data_direction == DMA_TO_DEVICE) {
1597
1598 result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
1599 registers, data, 19,
1600 USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
1601 (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
1602 DMA_TO_DEVICE,
1603 scsi_sglist(srb),
1604 len, scsi_sg_count(srb), 10);
1605
1606 if (result == USB_STOR_TRANSPORT_GOOD) {
1607 transferred += len;
1608 usb_stor_dbg(us, "Wrote %08X bytes\n", transferred);
1609 }
1610
1611 return result;
1612
1613 } else if (srb->cmnd[0] == READ_10 ||
1614 srb->cmnd[0] == GPCMD_READ_CD) {
1615
1616 return usbat_hp8200e_handle_read10(us, registers, data, srb);
1617
1618 }
1619
1620 if (len > 0xFFFF) {
1621 usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n",
1622 len);
1623 return USB_STOR_TRANSPORT_ERROR;
1624 }
1625
1626 result = usbat_multiple_write(us, registers, data, 7);
1627
1628 if (result != USB_STOR_TRANSPORT_GOOD)
1629 return result;
1630
1631 /*
1632 * Write the 12-byte command header.
1633 *
1634 * If the command is BLANK then set the timer for 75 minutes.
1635 * Otherwise set it for 10 minutes.
1636 *
1637 * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
1638 * AT SPEED 4 IS UNRELIABLE!!!
1639 */
1640
1641 result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12,
1642 srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0);
1643
1644 if (result != USB_STOR_TRANSPORT_GOOD)
1645 return result;
1646
1647 /* If there is response data to be read in then do it here. */
1648
1649 if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
1650
1651 /* How many bytes to read in? Check cylL register */
1652
1653 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
1654 USB_STOR_XFER_GOOD) {
1655 return USB_STOR_TRANSPORT_ERROR;
1656 }
1657
1658 if (len > 0xFF) { /* need to read cylH also */
1659 len = *status;
1660 if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
1661 USB_STOR_XFER_GOOD) {
1662 return USB_STOR_TRANSPORT_ERROR;
1663 }
1664 len += ((unsigned int) *status)<<8;
1665 }
1666 else
1667 len = *status;
1668
1669
1670 result = usbat_read_block(us, scsi_sglist(srb), len,
1671 scsi_sg_count(srb));
1672 }
1673
1674 return result;
1675 }
1676
1677 /*
1678 * Transport for USBAT02-based CompactFlash and similar storage devices
1679 */
usbat_flash_transport(struct scsi_cmnd * srb,struct us_data * us)1680 static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
1681 {
1682 int rc;
1683 struct usbat_info *info = (struct usbat_info *) (us->extra);
1684 unsigned long block, blocks;
1685 unsigned char *ptr = us->iobuf;
1686 static unsigned char inquiry_response[36] = {
1687 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
1688 };
1689
1690 if (srb->cmnd[0] == INQUIRY) {
1691 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
1692 memcpy(ptr, inquiry_response, sizeof(inquiry_response));
1693 fill_inquiry_response(us, ptr, 36);
1694 return USB_STOR_TRANSPORT_GOOD;
1695 }
1696
1697 if (srb->cmnd[0] == READ_CAPACITY) {
1698 rc = usbat_flash_check_media(us, info);
1699 if (rc != USB_STOR_TRANSPORT_GOOD)
1700 return rc;
1701
1702 rc = usbat_flash_get_sector_count(us, info);
1703 if (rc != USB_STOR_TRANSPORT_GOOD)
1704 return rc;
1705
1706 /* hard coded 512 byte sectors as per ATA spec */
1707 info->ssize = 0x200;
1708 usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
1709 info->sectors, info->ssize);
1710
1711 /*
1712 * build the reply
1713 * note: must return the sector number of the last sector,
1714 * *not* the total number of sectors
1715 */
1716 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
1717 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
1718 usb_stor_set_xfer_buf(ptr, 8, srb);
1719
1720 return USB_STOR_TRANSPORT_GOOD;
1721 }
1722
1723 if (srb->cmnd[0] == MODE_SELECT_10) {
1724 usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
1725 return USB_STOR_TRANSPORT_ERROR;
1726 }
1727
1728 if (srb->cmnd[0] == READ_10) {
1729 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1730 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
1731
1732 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
1733
1734 usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n",
1735 block, blocks);
1736 return usbat_flash_read_data(us, info, block, blocks);
1737 }
1738
1739 if (srb->cmnd[0] == READ_12) {
1740 /*
1741 * I don't think we'll ever see a READ_12 but support it anyway
1742 */
1743 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1744 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
1745
1746 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
1747 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
1748
1749 usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n",
1750 block, blocks);
1751 return usbat_flash_read_data(us, info, block, blocks);
1752 }
1753
1754 if (srb->cmnd[0] == WRITE_10) {
1755 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1756 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
1757
1758 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
1759
1760 usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n",
1761 block, blocks);
1762 return usbat_flash_write_data(us, info, block, blocks);
1763 }
1764
1765 if (srb->cmnd[0] == WRITE_12) {
1766 /*
1767 * I don't think we'll ever see a WRITE_12 but support it anyway
1768 */
1769 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
1770 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
1771
1772 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
1773 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9]));
1774
1775 usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n",
1776 block, blocks);
1777 return usbat_flash_write_data(us, info, block, blocks);
1778 }
1779
1780
1781 if (srb->cmnd[0] == TEST_UNIT_READY) {
1782 usb_stor_dbg(us, "TEST_UNIT_READY\n");
1783
1784 rc = usbat_flash_check_media(us, info);
1785 if (rc != USB_STOR_TRANSPORT_GOOD)
1786 return rc;
1787
1788 return usbat_check_status(us);
1789 }
1790
1791 if (srb->cmnd[0] == REQUEST_SENSE) {
1792 usb_stor_dbg(us, "REQUEST_SENSE\n");
1793
1794 memset(ptr, 0, 18);
1795 ptr[0] = 0xF0;
1796 ptr[2] = info->sense_key;
1797 ptr[7] = 11;
1798 ptr[12] = info->sense_asc;
1799 ptr[13] = info->sense_ascq;
1800 usb_stor_set_xfer_buf(ptr, 18, srb);
1801
1802 return USB_STOR_TRANSPORT_GOOD;
1803 }
1804
1805 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
1806 /*
1807 * sure. whatever. not like we can stop the user from popping
1808 * the media out of the device (no locking doors, etc)
1809 */
1810 return USB_STOR_TRANSPORT_GOOD;
1811 }
1812
1813 usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
1814 srb->cmnd[0], srb->cmnd[0]);
1815 info->sense_key = 0x05;
1816 info->sense_asc = 0x20;
1817 info->sense_ascq = 0x00;
1818 return USB_STOR_TRANSPORT_FAILED;
1819 }
1820
init_usbat_cd(struct us_data * us)1821 static int init_usbat_cd(struct us_data *us)
1822 {
1823 return init_usbat(us, USBAT_DEV_HP8200);
1824 }
1825
init_usbat_flash(struct us_data * us)1826 static int init_usbat_flash(struct us_data *us)
1827 {
1828 return init_usbat(us, USBAT_DEV_FLASH);
1829 }
1830
1831 static struct scsi_host_template usbat_host_template;
1832
usbat_probe(struct usb_interface * intf,const struct usb_device_id * id)1833 static int usbat_probe(struct usb_interface *intf,
1834 const struct usb_device_id *id)
1835 {
1836 struct us_data *us;
1837 int result;
1838
1839 result = usb_stor_probe1(&us, intf, id,
1840 (id - usbat_usb_ids) + usbat_unusual_dev_list,
1841 &usbat_host_template);
1842 if (result)
1843 return result;
1844
1845 /*
1846 * The actual transport will be determined later by the
1847 * initialization routine; this is just a placeholder.
1848 */
1849 us->transport_name = "Shuttle USBAT";
1850 us->transport = usbat_flash_transport;
1851 us->transport_reset = usb_stor_CB_reset;
1852 us->max_lun = 0;
1853
1854 result = usb_stor_probe2(us);
1855 return result;
1856 }
1857
1858 static struct usb_driver usbat_driver = {
1859 .name = DRV_NAME,
1860 .probe = usbat_probe,
1861 .disconnect = usb_stor_disconnect,
1862 .suspend = usb_stor_suspend,
1863 .resume = usb_stor_resume,
1864 .reset_resume = usb_stor_reset_resume,
1865 .pre_reset = usb_stor_pre_reset,
1866 .post_reset = usb_stor_post_reset,
1867 .id_table = usbat_usb_ids,
1868 .soft_unbind = 1,
1869 .no_dynamic_id = 1,
1870 };
1871
1872 module_usb_stor_driver(usbat_driver, usbat_host_template, DRV_NAME);
1873