1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2006 PA Semi, Inc
4  *
5  * Authors: Kip Walker, PA Semi
6  *	    Olof Johansson, PA Semi
7  *
8  * Maintained by: Olof Johansson <olof@lixom.net>
9  *
10  * Based on arch/powerpc/platforms/maple/pci.c
11  */
12 
13 
14 #include <linux/kernel.h>
15 #include <linux/of_address.h>
16 #include <linux/pci.h>
17 
18 #include <asm/pci-bridge.h>
19 #include <asm/isa-bridge.h>
20 #include <asm/machdep.h>
21 
22 #include <asm/ppc-pci.h>
23 
24 #include "pasemi.h"
25 
26 #define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
27 
pa_pxp_offset_valid(u8 bus,u8 devfn,int offset)28 static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset)
29 {
30 	/* Device 0 Function 0 is special: It's config space spans function 1 as
31 	 * well, so allow larger offset. It's really a two-function device but the
32 	 * second function does not probe.
33 	 */
34 	if (bus == 0 && devfn == 0)
35 		return offset < 8192;
36 	else
37 		return offset < 4096;
38 }
39 
pa_pxp_cfg_addr(struct pci_controller * hose,u8 bus,u8 devfn,int offset)40 static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose,
41 				       u8 bus, u8 devfn, int offset)
42 {
43 	return hose->cfg_data + PA_PXP_CFA(bus, devfn, offset);
44 }
45 
is_root_port(int busno,int devfn)46 static inline int is_root_port(int busno, int devfn)
47 {
48 	return ((busno == 0) && (PCI_FUNC(devfn) < 4) &&
49 		 ((PCI_SLOT(devfn) == 16) || (PCI_SLOT(devfn) == 17)));
50 }
51 
is_5945_reg(int reg)52 static inline int is_5945_reg(int reg)
53 {
54 	return (((reg >= 0x18) && (reg < 0x34)) ||
55 		((reg >= 0x158) && (reg < 0x178)));
56 }
57 
workaround_5945(struct pci_bus * bus,unsigned int devfn,int offset,int len,u32 * val)58 static int workaround_5945(struct pci_bus *bus, unsigned int devfn,
59 			   int offset, int len, u32 *val)
60 {
61 	struct pci_controller *hose;
62 	void volatile __iomem *addr, *dummy;
63 	int byte;
64 	u32 tmp;
65 
66 	if (!is_root_port(bus->number, devfn) || !is_5945_reg(offset))
67 		return 0;
68 
69 	hose = pci_bus_to_host(bus);
70 
71 	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset & ~0x3);
72 	byte = offset & 0x3;
73 
74 	/* Workaround bug 5945: write 0 to a dummy register before reading,
75 	 * and write back what we read. We must read/write the full 32-bit
76 	 * contents so we need to shift and mask by hand.
77 	 */
78 	dummy = pa_pxp_cfg_addr(hose, bus->number, devfn, 0x10);
79 	out_le32(dummy, 0);
80 	tmp = in_le32(addr);
81 	out_le32(addr, tmp);
82 
83 	switch (len) {
84 	case 1:
85 		*val = (tmp >> (8*byte)) & 0xff;
86 		break;
87 	case 2:
88 		if (byte == 0)
89 			*val = tmp & 0xffff;
90 		else
91 			*val = (tmp >> 16) & 0xffff;
92 		break;
93 	default:
94 		*val = tmp;
95 		break;
96 	}
97 
98 	return 1;
99 }
100 
101 #ifdef CONFIG_PPC_PASEMI_NEMO
102 #define PXP_ERR_CFG_REG	0x4
103 #define PXP_IGNORE_PCIE_ERRORS	0x800
104 #define SB600_BUS 5
105 
sb600_set_flag(int bus)106 static void sb600_set_flag(int bus)
107 {
108 	static void __iomem *iob_mapbase = NULL;
109 	struct resource res;
110 	struct device_node *dn;
111 	int err;
112 
113 	if (iob_mapbase == NULL) {
114 		dn = of_find_compatible_node(NULL, "isa", "pasemi,1682m-iob");
115 		if (!dn) {
116 			pr_crit("NEMO SB600 missing iob node\n");
117 			return;
118 		}
119 
120 		err = of_address_to_resource(dn, 0, &res);
121 		of_node_put(dn);
122 
123 		if (err) {
124 			pr_crit("NEMO SB600 missing resource\n");
125 			return;
126 		}
127 
128 		pr_info("NEMO SB600 IOB base %08llx\n",res.start);
129 
130 		iob_mapbase = ioremap(res.start + 0x100, 0x94);
131 	}
132 
133 	if (iob_mapbase != NULL) {
134 		if (bus == SB600_BUS) {
135 			/*
136 			 * This is the SB600's bus, tell the PCI-e root port
137 			 * to allow non-zero devices to enumerate.
138 			 */
139 			out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) | PXP_IGNORE_PCIE_ERRORS);
140 		} else {
141 			/*
142 			 * Only scan device 0 on other busses
143 			 */
144 			out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) & ~PXP_IGNORE_PCIE_ERRORS);
145 		}
146 	}
147 }
148 
149 #else
150 
sb600_set_flag(int bus)151 static void sb600_set_flag(int bus)
152 {
153 }
154 #endif
155 
pa_pxp_read_config(struct pci_bus * bus,unsigned int devfn,int offset,int len,u32 * val)156 static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
157 			      int offset, int len, u32 *val)
158 {
159 	struct pci_controller *hose;
160 	void volatile __iomem *addr;
161 
162 	hose = pci_bus_to_host(bus);
163 	if (!hose)
164 		return PCIBIOS_DEVICE_NOT_FOUND;
165 
166 	if (!pa_pxp_offset_valid(bus->number, devfn, offset))
167 		return PCIBIOS_BAD_REGISTER_NUMBER;
168 
169 	if (workaround_5945(bus, devfn, offset, len, val))
170 		return PCIBIOS_SUCCESSFUL;
171 
172 	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
173 
174 	sb600_set_flag(bus->number);
175 
176 	/*
177 	 * Note: the caller has already checked that offset is
178 	 * suitably aligned and that len is 1, 2 or 4.
179 	 */
180 	switch (len) {
181 	case 1:
182 		*val = in_8(addr);
183 		break;
184 	case 2:
185 		*val = in_le16(addr);
186 		break;
187 	default:
188 		*val = in_le32(addr);
189 		break;
190 	}
191 
192 	return PCIBIOS_SUCCESSFUL;
193 }
194 
pa_pxp_write_config(struct pci_bus * bus,unsigned int devfn,int offset,int len,u32 val)195 static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn,
196 			       int offset, int len, u32 val)
197 {
198 	struct pci_controller *hose;
199 	void volatile __iomem *addr;
200 
201 	hose = pci_bus_to_host(bus);
202 	if (!hose)
203 		return PCIBIOS_DEVICE_NOT_FOUND;
204 
205 	if (!pa_pxp_offset_valid(bus->number, devfn, offset))
206 		return PCIBIOS_BAD_REGISTER_NUMBER;
207 
208 	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
209 
210 	sb600_set_flag(bus->number);
211 
212 	/*
213 	 * Note: the caller has already checked that offset is
214 	 * suitably aligned and that len is 1, 2 or 4.
215 	 */
216 	switch (len) {
217 	case 1:
218 		out_8(addr, val);
219 		break;
220 	case 2:
221 		out_le16(addr, val);
222 		break;
223 	default:
224 		out_le32(addr, val);
225 		break;
226 	}
227 	return PCIBIOS_SUCCESSFUL;
228 }
229 
230 static struct pci_ops pa_pxp_ops = {
231 	.read = pa_pxp_read_config,
232 	.write = pa_pxp_write_config,
233 };
234 
setup_pa_pxp(struct pci_controller * hose)235 static void __init setup_pa_pxp(struct pci_controller *hose)
236 {
237 	hose->ops = &pa_pxp_ops;
238 	hose->cfg_data = ioremap(0xe0000000, 0x10000000);
239 }
240 
pas_add_bridge(struct device_node * dev)241 static int __init pas_add_bridge(struct device_node *dev)
242 {
243 	struct pci_controller *hose;
244 
245 	pr_debug("Adding PCI host bridge %pOF\n", dev);
246 
247 	hose = pcibios_alloc_controller(dev);
248 	if (!hose)
249 		return -ENOMEM;
250 
251 	hose->first_busno = 0;
252 	hose->last_busno = 0xff;
253 	hose->controller_ops = pasemi_pci_controller_ops;
254 
255 	setup_pa_pxp(hose);
256 
257 	pr_info("Found PA-PXP PCI host bridge.\n");
258 
259 	/* Interpret the "ranges" property */
260 	pci_process_bridge_OF_ranges(hose, dev, 1);
261 
262 	/*
263 	 * Scan for an isa bridge. This is needed to find the SB600 on the nemo
264 	 * and does nothing on machines without one.
265 	 */
266 	isa_bridge_find_early(hose);
267 
268 	return 0;
269 }
270 
pas_pci_init(void)271 void __init pas_pci_init(void)
272 {
273 	struct device_node *np;
274 	int res;
275 
276 	pci_set_flags(PCI_SCAN_ALL_PCIE_DEVS);
277 
278 	np = of_find_compatible_node(of_root, NULL, "pasemi,rootbus");
279 	if (np) {
280 		res = pas_add_bridge(np);
281 		of_node_put(np);
282 	}
283 }
284 
pasemi_pci_getcfgaddr(struct pci_dev * dev,int offset)285 void __iomem *__init pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset)
286 {
287 	struct pci_controller *hose;
288 
289 	hose = pci_bus_to_host(dev->bus);
290 
291 	return (void __iomem *)pa_pxp_cfg_addr(hose, dev->bus->number, dev->devfn, offset);
292 }
293 
294 struct pci_controller_ops pasemi_pci_controller_ops;
295