1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Copyright (c) 2011 Samsung Electronics Co., Ltd.
4 // http://www.samsung.com
5 //
6 // Copyright 2008 Openmoko, Inc.
7 // Copyright 2008 Simtec Electronics
8 // Ben Dooks <ben@simtec.co.uk>
9 // http://armlinux.simtec.co.uk/
10 //
11 // Common Codes for S3C64XX machines
12
13 /*
14 * NOTE: Code in this file is not used when booting with Device Tree support.
15 */
16
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/module.h>
20 #include <linux/interrupt.h>
21 #include <linux/ioport.h>
22 #include <linux/serial_core.h>
23 #include <linux/serial_s3c.h>
24 #include <linux/platform_device.h>
25 #include <linux/reboot.h>
26 #include <linux/io.h>
27 #include <linux/clk/samsung.h>
28 #include <linux/dma-mapping.h>
29 #include <linux/irq.h>
30 #include <linux/gpio.h>
31 #include <linux/irqchip/arm-vic.h>
32 #include <clocksource/samsung_pwm.h>
33
34 #include <asm/mach/arch.h>
35 #include <asm/mach/map.h>
36 #include <asm/system_misc.h>
37
38 #include "map.h"
39 #include "irqs.h"
40 #include "regs-gpio.h"
41 #include "gpio-samsung.h"
42
43 #include "cpu.h"
44 #include "devs.h"
45 #include "pm.h"
46 #include "gpio-cfg.h"
47 #include "pwm-core.h"
48 #include "regs-irqtype.h"
49 #include "s3c64xx.h"
50 #include "irq-uart-s3c64xx.h"
51
52 /* External clock frequency */
53 static unsigned long xtal_f __ro_after_init = 12000000;
54 static unsigned long xusbxti_f __ro_after_init = 48000000;
55
s3c64xx_set_xtal_freq(unsigned long freq)56 void __init s3c64xx_set_xtal_freq(unsigned long freq)
57 {
58 xtal_f = freq;
59 }
60
s3c64xx_set_xusbxti_freq(unsigned long freq)61 void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
62 {
63 xusbxti_f = freq;
64 }
65
66 /* uart registration process */
67
s3c64xx_init_uarts(struct s3c2410_uartcfg * cfg,int no)68 static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
69 {
70 s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
71 }
72
73 /* table of supported CPUs */
74
75 static const char name_s3c6410[] = "S3C6410";
76
77 static struct cpu_table cpu_ids[] __initdata = {
78 {
79 .idcode = S3C6410_CPU_ID,
80 .idmask = S3C64XX_CPU_MASK,
81 .map_io = s3c6410_map_io,
82 .init_uarts = s3c64xx_init_uarts,
83 .init = s3c6410_init,
84 .name = name_s3c6410,
85 },
86 };
87
88 /* minimal IO mapping */
89
90 /*
91 * note, for the boot process to work we have to keep the UART
92 * virtual address aligned to an 1MiB boundary for the L1
93 * mapping the head code makes. We keep the UART virtual address
94 * aligned and add in the offset when we load the value here.
95 */
96 #define UART_OFFS (S3C_PA_UART & 0xfffff)
97
98 static struct map_desc s3c_iodesc[] __initdata = {
99 {
100 .virtual = (unsigned long)S3C_VA_SYS,
101 .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
102 .length = SZ_4K,
103 .type = MT_DEVICE,
104 }, {
105 .virtual = (unsigned long)S3C_VA_MEM,
106 .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
107 .length = SZ_4K,
108 .type = MT_DEVICE,
109 }, {
110 .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
111 .pfn = __phys_to_pfn(S3C_PA_UART),
112 .length = SZ_4K,
113 .type = MT_DEVICE,
114 }, {
115 .virtual = (unsigned long)VA_VIC0,
116 .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
117 .length = SZ_16K,
118 .type = MT_DEVICE,
119 }, {
120 .virtual = (unsigned long)VA_VIC1,
121 .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
122 .length = SZ_16K,
123 .type = MT_DEVICE,
124 }, {
125 .virtual = (unsigned long)S3C_VA_TIMER,
126 .pfn = __phys_to_pfn(S3C_PA_TIMER),
127 .length = SZ_16K,
128 .type = MT_DEVICE,
129 }, {
130 .virtual = (unsigned long)S3C64XX_VA_GPIO,
131 .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
132 .length = SZ_4K,
133 .type = MT_DEVICE,
134 }, {
135 .virtual = (unsigned long)S3C64XX_VA_MODEM,
136 .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
137 .length = SZ_4K,
138 .type = MT_DEVICE,
139 }, {
140 .virtual = (unsigned long)S3C_VA_WATCHDOG,
141 .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
142 .length = SZ_4K,
143 .type = MT_DEVICE,
144 }, {
145 .virtual = (unsigned long)S3C_VA_USB_HSPHY,
146 .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
147 .length = SZ_1K,
148 .type = MT_DEVICE,
149 },
150 };
151
152 static struct bus_type s3c64xx_subsys = {
153 .name = "s3c64xx-core",
154 .dev_name = "s3c64xx-core",
155 };
156
157 static struct device s3c64xx_dev = {
158 .bus = &s3c64xx_subsys,
159 };
160
161 static struct samsung_pwm_variant s3c64xx_pwm_variant = {
162 .bits = 32,
163 .div_base = 0,
164 .has_tint_cstat = true,
165 .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5),
166 };
167
s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,enum s3c64xx_timer_mode source)168 void __init s3c64xx_set_timer_source(enum s3c64xx_timer_mode event,
169 enum s3c64xx_timer_mode source)
170 {
171 s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
172 s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
173 }
174
s3c64xx_timer_init(void)175 void __init s3c64xx_timer_init(void)
176 {
177 unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
178 IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
179 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
180 };
181
182 samsung_pwm_clocksource_init(S3C_VA_TIMER,
183 timer_irqs, &s3c64xx_pwm_variant);
184 }
185
186 /* read cpu identification code */
187
s3c64xx_init_io(struct map_desc * mach_desc,int size)188 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
189 {
190 /* initialise the io descriptors we need for initialisation */
191 iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
192 iotable_init(mach_desc, size);
193
194 /* detect cpu id */
195 s3c64xx_init_cpu();
196
197 s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
198
199 samsung_pwm_set_platdata(&s3c64xx_pwm_variant);
200 }
201
s3c64xx_dev_init(void)202 static __init int s3c64xx_dev_init(void)
203 {
204 /* Not applicable when using DT. */
205 if (of_have_populated_dt() || !soc_is_s3c64xx())
206 return 0;
207
208 subsys_system_register(&s3c64xx_subsys, NULL);
209 return device_register(&s3c64xx_dev);
210 }
211 core_initcall(s3c64xx_dev_init);
212
213 /*
214 * setup the sources the vic should advertise resume
215 * for, even though it is not doing the wake
216 * (set_irq_wake needs to be valid)
217 */
218 #define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
219 #define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
220 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
221 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
222 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
223 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
224
s3c64xx_init_irq(u32 vic0_valid,u32 vic1_valid)225 void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
226 {
227 s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
228
229 printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
230
231 /* initialise the pair of VICs */
232 vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
233 vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
234 }
235
236 #define eint_offset(irq) ((irq) - IRQ_EINT(0))
237 #define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
238
s3c_irq_eint_mask(struct irq_data * data)239 static inline void s3c_irq_eint_mask(struct irq_data *data)
240 {
241 u32 mask;
242
243 mask = __raw_readl(S3C64XX_EINT0MASK);
244 mask |= (u32)data->chip_data;
245 __raw_writel(mask, S3C64XX_EINT0MASK);
246 }
247
s3c_irq_eint_unmask(struct irq_data * data)248 static void s3c_irq_eint_unmask(struct irq_data *data)
249 {
250 u32 mask;
251
252 mask = __raw_readl(S3C64XX_EINT0MASK);
253 mask &= ~((u32)data->chip_data);
254 __raw_writel(mask, S3C64XX_EINT0MASK);
255 }
256
s3c_irq_eint_ack(struct irq_data * data)257 static inline void s3c_irq_eint_ack(struct irq_data *data)
258 {
259 __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
260 }
261
s3c_irq_eint_maskack(struct irq_data * data)262 static void s3c_irq_eint_maskack(struct irq_data *data)
263 {
264 /* compiler should in-line these */
265 s3c_irq_eint_mask(data);
266 s3c_irq_eint_ack(data);
267 }
268
s3c_irq_eint_set_type(struct irq_data * data,unsigned int type)269 static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
270 {
271 int offs = eint_offset(data->irq);
272 int pin, pin_val;
273 int shift;
274 u32 ctrl, mask;
275 u32 newvalue = 0;
276 void __iomem *reg;
277
278 if (offs > 27)
279 return -EINVAL;
280
281 if (offs <= 15)
282 reg = S3C64XX_EINT0CON0;
283 else
284 reg = S3C64XX_EINT0CON1;
285
286 switch (type) {
287 case IRQ_TYPE_NONE:
288 printk(KERN_WARNING "No edge setting!\n");
289 break;
290
291 case IRQ_TYPE_EDGE_RISING:
292 newvalue = S3C2410_EXTINT_RISEEDGE;
293 break;
294
295 case IRQ_TYPE_EDGE_FALLING:
296 newvalue = S3C2410_EXTINT_FALLEDGE;
297 break;
298
299 case IRQ_TYPE_EDGE_BOTH:
300 newvalue = S3C2410_EXTINT_BOTHEDGE;
301 break;
302
303 case IRQ_TYPE_LEVEL_LOW:
304 newvalue = S3C2410_EXTINT_LOWLEV;
305 break;
306
307 case IRQ_TYPE_LEVEL_HIGH:
308 newvalue = S3C2410_EXTINT_HILEV;
309 break;
310
311 default:
312 printk(KERN_ERR "No such irq type %d", type);
313 return -1;
314 }
315
316 if (offs <= 15)
317 shift = (offs / 2) * 4;
318 else
319 shift = ((offs - 16) / 2) * 4;
320 mask = 0x7 << shift;
321
322 ctrl = __raw_readl(reg);
323 ctrl &= ~mask;
324 ctrl |= newvalue << shift;
325 __raw_writel(ctrl, reg);
326
327 /* set the GPIO pin appropriately */
328
329 if (offs < 16) {
330 pin = S3C64XX_GPN(offs);
331 pin_val = S3C_GPIO_SFN(2);
332 } else if (offs < 23) {
333 pin = S3C64XX_GPL(offs + 8 - 16);
334 pin_val = S3C_GPIO_SFN(3);
335 } else {
336 pin = S3C64XX_GPM(offs - 23);
337 pin_val = S3C_GPIO_SFN(3);
338 }
339
340 s3c_gpio_cfgpin(pin, pin_val);
341
342 return 0;
343 }
344
345 static struct irq_chip s3c_irq_eint = {
346 .name = "s3c-eint",
347 .irq_mask = s3c_irq_eint_mask,
348 .irq_unmask = s3c_irq_eint_unmask,
349 .irq_mask_ack = s3c_irq_eint_maskack,
350 .irq_ack = s3c_irq_eint_ack,
351 .irq_set_type = s3c_irq_eint_set_type,
352 .irq_set_wake = s3c_irqext_wake,
353 };
354
355 /* s3c_irq_demux_eint
356 *
357 * This function demuxes the IRQ from the group0 external interrupts,
358 * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
359 * the specific handlers s3c_irq_demux_eintX_Y.
360 */
s3c_irq_demux_eint(unsigned int start,unsigned int end)361 static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
362 {
363 u32 status = __raw_readl(S3C64XX_EINT0PEND);
364 u32 mask = __raw_readl(S3C64XX_EINT0MASK);
365 unsigned int irq;
366
367 status &= ~mask;
368 status >>= start;
369 status &= (1 << (end - start + 1)) - 1;
370
371 for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
372 if (status & 1)
373 generic_handle_irq(irq);
374
375 status >>= 1;
376 }
377 }
378
s3c_irq_demux_eint0_3(struct irq_desc * desc)379 static void s3c_irq_demux_eint0_3(struct irq_desc *desc)
380 {
381 s3c_irq_demux_eint(0, 3);
382 }
383
s3c_irq_demux_eint4_11(struct irq_desc * desc)384 static void s3c_irq_demux_eint4_11(struct irq_desc *desc)
385 {
386 s3c_irq_demux_eint(4, 11);
387 }
388
s3c_irq_demux_eint12_19(struct irq_desc * desc)389 static void s3c_irq_demux_eint12_19(struct irq_desc *desc)
390 {
391 s3c_irq_demux_eint(12, 19);
392 }
393
s3c_irq_demux_eint20_27(struct irq_desc * desc)394 static void s3c_irq_demux_eint20_27(struct irq_desc *desc)
395 {
396 s3c_irq_demux_eint(20, 27);
397 }
398
s3c64xx_init_irq_eint(void)399 static int __init s3c64xx_init_irq_eint(void)
400 {
401 int irq;
402
403 /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
404 if (of_have_populated_dt() || !soc_is_s3c64xx())
405 return -ENODEV;
406
407 for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
408 irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
409 irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
410 irq_clear_status_flags(irq, IRQ_NOREQUEST);
411 }
412
413 irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
414 irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
415 irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
416 irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
417
418 return 0;
419 }
420 arch_initcall(s3c64xx_init_irq_eint);
421
422 #ifndef CONFIG_COMPILE_TEST
423 #pragma message "The platform is deprecated and scheduled for removal. " \
424 "Please reach to the maintainers of the platform " \
425 "and linux-samsung-soc@vger.kernel.org if you still use it." \
426 "Without such feedback, the platform will be removed after 2024."
427 #endif
428