1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * twl_core.c - driver for TWL4030/TWL5030/TWL60X0/TPS659x0 PM
4 * and audio CODEC devices
5 *
6 * Copyright (C) 2005-2006 Texas Instruments, Inc.
7 *
8 * Modifications to defer interrupt handling to a kernel thread:
9 * Copyright (C) 2006 MontaVista Software, Inc.
10 *
11 * Based on tlv320aic23.c:
12 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
13 *
14 * Code cleanup and modifications to IRQ handler.
15 * by syed khasim <x0khasim@ti.com>
16 */
17
18 #include <linux/init.h>
19 #include <linux/mutex.h>
20 #include <linux/platform_device.h>
21 #include <linux/regmap.h>
22 #include <linux/clk.h>
23 #include <linux/err.h>
24 #include <linux/device.h>
25 #include <linux/of.h>
26 #include <linux/of_irq.h>
27 #include <linux/of_platform.h>
28 #include <linux/irq.h>
29 #include <linux/irqdomain.h>
30
31 #include <linux/regulator/machine.h>
32
33 #include <linux/i2c.h>
34 #include <linux/mfd/twl.h>
35
36 /* Register descriptions for audio */
37 #include <linux/mfd/twl4030-audio.h>
38
39 #include "twl-core.h"
40
41 /*
42 * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
43 * Management and System Companion Device" chips originally designed for
44 * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C,
45 * often at around 3 Mbit/sec, including for interrupt handling.
46 *
47 * This driver core provides genirq support for the interrupts emitted,
48 * by the various modules, and exports register access primitives.
49 *
50 * FIXME this driver currently requires use of the first interrupt line
51 * (and associated registers).
52 */
53
54 #define DRIVER_NAME "twl"
55
56 /* Triton Core internal information (BEGIN) */
57
58 /* Base Address defns for twl4030_map[] */
59
60 /* subchip/slave 0 - USB ID */
61 #define TWL4030_BASEADD_USB 0x0000
62
63 /* subchip/slave 1 - AUD ID */
64 #define TWL4030_BASEADD_AUDIO_VOICE 0x0000
65 #define TWL4030_BASEADD_GPIO 0x0098
66 #define TWL4030_BASEADD_INTBR 0x0085
67 #define TWL4030_BASEADD_PIH 0x0080
68 #define TWL4030_BASEADD_TEST 0x004C
69
70 /* subchip/slave 2 - AUX ID */
71 #define TWL4030_BASEADD_INTERRUPTS 0x00B9
72 #define TWL4030_BASEADD_LED 0x00EE
73 #define TWL4030_BASEADD_MADC 0x0000
74 #define TWL4030_BASEADD_MAIN_CHARGE 0x0074
75 #define TWL4030_BASEADD_PRECHARGE 0x00AA
76 #define TWL4030_BASEADD_PWM 0x00F8
77 #define TWL4030_BASEADD_KEYPAD 0x00D2
78
79 #define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */
80 #define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's
81 one */
82
83 /* subchip/slave 3 - POWER ID */
84 #define TWL4030_BASEADD_BACKUP 0x0014
85 #define TWL4030_BASEADD_INT 0x002E
86 #define TWL4030_BASEADD_PM_MASTER 0x0036
87
88 #define TWL4030_BASEADD_PM_RECEIVER 0x005B
89 #define TWL4030_DCDC_GLOBAL_CFG 0x06
90 #define SMARTREFLEX_ENABLE BIT(3)
91
92 #define TWL4030_BASEADD_RTC 0x001C
93 #define TWL4030_BASEADD_SECURED_REG 0x0000
94
95 /* Triton Core internal information (END) */
96
97
98 /* subchip/slave 0 0x48 - POWER */
99 #define TWL6030_BASEADD_RTC 0x0000
100 #define TWL6030_BASEADD_SECURED_REG 0x0017
101 #define TWL6030_BASEADD_PM_MASTER 0x001F
102 #define TWL6030_BASEADD_PM_SLAVE_MISC 0x0030 /* PM_RECEIVER */
103 #define TWL6030_BASEADD_PM_MISC 0x00E2
104 #define TWL6030_BASEADD_PM_PUPD 0x00F0
105
106 /* subchip/slave 1 0x49 - FEATURE */
107 #define TWL6030_BASEADD_USB 0x0000
108 #define TWL6030_BASEADD_GPADC_CTRL 0x002E
109 #define TWL6030_BASEADD_AUX 0x0090
110 #define TWL6030_BASEADD_PWM 0x00BA
111 #define TWL6030_BASEADD_GASGAUGE 0x00C0
112 #define TWL6030_BASEADD_PIH 0x00D0
113 #define TWL6032_BASEADD_CHARGER 0x00DA
114 #define TWL6030_BASEADD_CHARGER 0x00E0
115 #define TWL6030_BASEADD_LED 0x00F4
116
117 /* subchip/slave 2 0x4A - DFT */
118 #define TWL6030_BASEADD_DIEID 0x00C0
119
120 /* subchip/slave 3 0x4B - AUDIO */
121 #define TWL6030_BASEADD_AUDIO 0x0000
122 #define TWL6030_BASEADD_RSV 0x0000
123 #define TWL6030_BASEADD_ZERO 0x0000
124
125 /* Few power values */
126 #define R_CFG_BOOT 0x05
127
128 /* some fields in R_CFG_BOOT */
129 #define HFCLK_FREQ_19p2_MHZ (1 << 0)
130 #define HFCLK_FREQ_26_MHZ (2 << 0)
131 #define HFCLK_FREQ_38p4_MHZ (3 << 0)
132 #define HIGH_PERF_SQ (1 << 3)
133 #define CK32K_LOWPWR_EN (1 << 7)
134
135 /*----------------------------------------------------------------------*/
136
137 /* Structure for each TWL4030/TWL6030 Slave */
138 struct twl_client {
139 struct i2c_client *client;
140 struct regmap *regmap;
141 };
142
143 /* mapping the module id to slave id and base address */
144 struct twl_mapping {
145 unsigned char sid; /* Slave ID */
146 unsigned char base; /* base address */
147 };
148
149 struct twl_private {
150 bool ready; /* The core driver is ready to be used */
151 u32 twl_idcode; /* TWL IDCODE Register value */
152 unsigned int twl_id;
153
154 struct twl_mapping *twl_map;
155 struct twl_client *twl_modules;
156 };
157
158 static struct twl_private *twl_priv;
159
160 static struct twl_mapping twl4030_map[] = {
161 /*
162 * NOTE: don't change this table without updating the
163 * <linux/mfd/twl.h> defines for TWL4030_MODULE_*
164 * so they continue to match the order in this table.
165 */
166
167 /* Common IPs */
168 { 0, TWL4030_BASEADD_USB },
169 { 1, TWL4030_BASEADD_PIH },
170 { 2, TWL4030_BASEADD_MAIN_CHARGE },
171 { 3, TWL4030_BASEADD_PM_MASTER },
172 { 3, TWL4030_BASEADD_PM_RECEIVER },
173
174 { 3, TWL4030_BASEADD_RTC },
175 { 2, TWL4030_BASEADD_PWM },
176 { 2, TWL4030_BASEADD_LED },
177 { 3, TWL4030_BASEADD_SECURED_REG },
178
179 /* TWL4030 specific IPs */
180 { 1, TWL4030_BASEADD_AUDIO_VOICE },
181 { 1, TWL4030_BASEADD_GPIO },
182 { 1, TWL4030_BASEADD_INTBR },
183 { 1, TWL4030_BASEADD_TEST },
184 { 2, TWL4030_BASEADD_KEYPAD },
185
186 { 2, TWL4030_BASEADD_MADC },
187 { 2, TWL4030_BASEADD_INTERRUPTS },
188 { 2, TWL4030_BASEADD_PRECHARGE },
189 { 3, TWL4030_BASEADD_BACKUP },
190 { 3, TWL4030_BASEADD_INT },
191
192 { 2, TWL5031_BASEADD_ACCESSORY },
193 { 2, TWL5031_BASEADD_INTERRUPTS },
194 };
195
196 static const struct reg_default twl4030_49_defaults[] = {
197 /* Audio Registers */
198 { 0x01, 0x00}, /* CODEC_MODE */
199 { 0x02, 0x00}, /* OPTION */
200 /* 0x03 Unused */
201 { 0x04, 0x00}, /* MICBIAS_CTL */
202 { 0x05, 0x00}, /* ANAMICL */
203 { 0x06, 0x00}, /* ANAMICR */
204 { 0x07, 0x00}, /* AVADC_CTL */
205 { 0x08, 0x00}, /* ADCMICSEL */
206 { 0x09, 0x00}, /* DIGMIXING */
207 { 0x0a, 0x0f}, /* ATXL1PGA */
208 { 0x0b, 0x0f}, /* ATXR1PGA */
209 { 0x0c, 0x0f}, /* AVTXL2PGA */
210 { 0x0d, 0x0f}, /* AVTXR2PGA */
211 { 0x0e, 0x00}, /* AUDIO_IF */
212 { 0x0f, 0x00}, /* VOICE_IF */
213 { 0x10, 0x3f}, /* ARXR1PGA */
214 { 0x11, 0x3f}, /* ARXL1PGA */
215 { 0x12, 0x3f}, /* ARXR2PGA */
216 { 0x13, 0x3f}, /* ARXL2PGA */
217 { 0x14, 0x25}, /* VRXPGA */
218 { 0x15, 0x00}, /* VSTPGA */
219 { 0x16, 0x00}, /* VRX2ARXPGA */
220 { 0x17, 0x00}, /* AVDAC_CTL */
221 { 0x18, 0x00}, /* ARX2VTXPGA */
222 { 0x19, 0x32}, /* ARXL1_APGA_CTL*/
223 { 0x1a, 0x32}, /* ARXR1_APGA_CTL*/
224 { 0x1b, 0x32}, /* ARXL2_APGA_CTL*/
225 { 0x1c, 0x32}, /* ARXR2_APGA_CTL*/
226 { 0x1d, 0x00}, /* ATX2ARXPGA */
227 { 0x1e, 0x00}, /* BT_IF */
228 { 0x1f, 0x55}, /* BTPGA */
229 { 0x20, 0x00}, /* BTSTPGA */
230 { 0x21, 0x00}, /* EAR_CTL */
231 { 0x22, 0x00}, /* HS_SEL */
232 { 0x23, 0x00}, /* HS_GAIN_SET */
233 { 0x24, 0x00}, /* HS_POPN_SET */
234 { 0x25, 0x00}, /* PREDL_CTL */
235 { 0x26, 0x00}, /* PREDR_CTL */
236 { 0x27, 0x00}, /* PRECKL_CTL */
237 { 0x28, 0x00}, /* PRECKR_CTL */
238 { 0x29, 0x00}, /* HFL_CTL */
239 { 0x2a, 0x00}, /* HFR_CTL */
240 { 0x2b, 0x05}, /* ALC_CTL */
241 { 0x2c, 0x00}, /* ALC_SET1 */
242 { 0x2d, 0x00}, /* ALC_SET2 */
243 { 0x2e, 0x00}, /* BOOST_CTL */
244 { 0x2f, 0x00}, /* SOFTVOL_CTL */
245 { 0x30, 0x13}, /* DTMF_FREQSEL */
246 { 0x31, 0x00}, /* DTMF_TONEXT1H */
247 { 0x32, 0x00}, /* DTMF_TONEXT1L */
248 { 0x33, 0x00}, /* DTMF_TONEXT2H */
249 { 0x34, 0x00}, /* DTMF_TONEXT2L */
250 { 0x35, 0x79}, /* DTMF_TONOFF */
251 { 0x36, 0x11}, /* DTMF_WANONOFF */
252 { 0x37, 0x00}, /* I2S_RX_SCRAMBLE_H */
253 { 0x38, 0x00}, /* I2S_RX_SCRAMBLE_M */
254 { 0x39, 0x00}, /* I2S_RX_SCRAMBLE_L */
255 { 0x3a, 0x06}, /* APLL_CTL */
256 { 0x3b, 0x00}, /* DTMF_CTL */
257 { 0x3c, 0x44}, /* DTMF_PGA_CTL2 (0x3C) */
258 { 0x3d, 0x69}, /* DTMF_PGA_CTL1 (0x3D) */
259 { 0x3e, 0x00}, /* MISC_SET_1 */
260 { 0x3f, 0x00}, /* PCMBTMUX */
261 /* 0x40 - 0x42 Unused */
262 { 0x43, 0x00}, /* RX_PATH_SEL */
263 { 0x44, 0x32}, /* VDL_APGA_CTL */
264 { 0x45, 0x00}, /* VIBRA_CTL */
265 { 0x46, 0x00}, /* VIBRA_SET */
266 { 0x47, 0x00}, /* VIBRA_PWM_SET */
267 { 0x48, 0x00}, /* ANAMIC_GAIN */
268 { 0x49, 0x00}, /* MISC_SET_2 */
269 /* End of Audio Registers */
270 };
271
twl4030_49_nop_reg(struct device * dev,unsigned int reg)272 static bool twl4030_49_nop_reg(struct device *dev, unsigned int reg)
273 {
274 switch (reg) {
275 case 0x00:
276 case 0x03:
277 case 0x40:
278 case 0x41:
279 case 0x42:
280 return false;
281 default:
282 return true;
283 }
284 }
285
286 static const struct regmap_range twl4030_49_volatile_ranges[] = {
287 regmap_reg_range(TWL4030_BASEADD_TEST, 0xff),
288 };
289
290 static const struct regmap_access_table twl4030_49_volatile_table = {
291 .yes_ranges = twl4030_49_volatile_ranges,
292 .n_yes_ranges = ARRAY_SIZE(twl4030_49_volatile_ranges),
293 };
294
295 static const struct regmap_config twl4030_regmap_config[4] = {
296 {
297 /* Address 0x48 */
298 .reg_bits = 8,
299 .val_bits = 8,
300 .max_register = 0xff,
301 },
302 {
303 /* Address 0x49 */
304 .reg_bits = 8,
305 .val_bits = 8,
306 .max_register = 0xff,
307
308 .readable_reg = twl4030_49_nop_reg,
309 .writeable_reg = twl4030_49_nop_reg,
310
311 .volatile_table = &twl4030_49_volatile_table,
312
313 .reg_defaults = twl4030_49_defaults,
314 .num_reg_defaults = ARRAY_SIZE(twl4030_49_defaults),
315 .cache_type = REGCACHE_RBTREE,
316 },
317 {
318 /* Address 0x4a */
319 .reg_bits = 8,
320 .val_bits = 8,
321 .max_register = 0xff,
322 },
323 {
324 /* Address 0x4b */
325 .reg_bits = 8,
326 .val_bits = 8,
327 .max_register = 0xff,
328 },
329 };
330
331 static struct twl_mapping twl6030_map[] = {
332 /*
333 * NOTE: don't change this table without updating the
334 * <linux/mfd/twl.h> defines for TWL4030_MODULE_*
335 * so they continue to match the order in this table.
336 */
337
338 /* Common IPs */
339 { 1, TWL6030_BASEADD_USB },
340 { 1, TWL6030_BASEADD_PIH },
341 { 1, TWL6030_BASEADD_CHARGER },
342 { 0, TWL6030_BASEADD_PM_MASTER },
343 { 0, TWL6030_BASEADD_PM_SLAVE_MISC },
344
345 { 0, TWL6030_BASEADD_RTC },
346 { 1, TWL6030_BASEADD_PWM },
347 { 1, TWL6030_BASEADD_LED },
348 { 0, TWL6030_BASEADD_SECURED_REG },
349
350 /* TWL6030 specific IPs */
351 { 0, TWL6030_BASEADD_ZERO },
352 { 1, TWL6030_BASEADD_ZERO },
353 { 2, TWL6030_BASEADD_ZERO },
354 { 1, TWL6030_BASEADD_GPADC_CTRL },
355 { 1, TWL6030_BASEADD_GASGAUGE },
356
357 /* TWL6032 specific charger registers */
358 { 1, TWL6032_BASEADD_CHARGER },
359 };
360
361 static const struct regmap_config twl6030_regmap_config[3] = {
362 {
363 /* Address 0x48 */
364 .reg_bits = 8,
365 .val_bits = 8,
366 .max_register = 0xff,
367 },
368 {
369 /* Address 0x49 */
370 .reg_bits = 8,
371 .val_bits = 8,
372 .max_register = 0xff,
373 },
374 {
375 /* Address 0x4a */
376 .reg_bits = 8,
377 .val_bits = 8,
378 .max_register = 0xff,
379 },
380 };
381
382 /*----------------------------------------------------------------------*/
383
twl_get_num_slaves(void)384 static inline int twl_get_num_slaves(void)
385 {
386 if (twl_class_is_4030())
387 return 4; /* TWL4030 class have four slave address */
388 else
389 return 3; /* TWL6030 class have three slave address */
390 }
391
twl_get_last_module(void)392 static inline int twl_get_last_module(void)
393 {
394 if (twl_class_is_4030())
395 return TWL4030_MODULE_LAST;
396 else
397 return TWL6030_MODULE_LAST;
398 }
399
400 /* Exported Functions */
401
twl_rev(void)402 unsigned int twl_rev(void)
403 {
404 return twl_priv ? twl_priv->twl_id : 0;
405 }
406 EXPORT_SYMBOL(twl_rev);
407
408 /**
409 * twl_get_regmap - Get the regmap associated with the given module
410 * @mod_no: module number
411 *
412 * Returns the regmap pointer or NULL in case of failure.
413 */
twl_get_regmap(u8 mod_no)414 static struct regmap *twl_get_regmap(u8 mod_no)
415 {
416 int sid;
417 struct twl_client *twl;
418
419 if (unlikely(!twl_priv || !twl_priv->ready)) {
420 pr_err("%s: not initialized\n", DRIVER_NAME);
421 return NULL;
422 }
423 if (unlikely(mod_no >= twl_get_last_module())) {
424 pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
425 return NULL;
426 }
427
428 sid = twl_priv->twl_map[mod_no].sid;
429 twl = &twl_priv->twl_modules[sid];
430
431 return twl->regmap;
432 }
433
434 /**
435 * twl_i2c_write - Writes a n bit register in TWL4030/TWL5030/TWL60X0
436 * @mod_no: module number
437 * @value: an array of num_bytes+1 containing data to write
438 * @reg: register address (just offset will do)
439 * @num_bytes: number of bytes to transfer
440 *
441 * Returns 0 on success or else a negative error code.
442 */
twl_i2c_write(u8 mod_no,u8 * value,u8 reg,unsigned num_bytes)443 int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
444 {
445 struct regmap *regmap = twl_get_regmap(mod_no);
446 int ret;
447
448 if (!regmap)
449 return -EPERM;
450
451 ret = regmap_bulk_write(regmap, twl_priv->twl_map[mod_no].base + reg,
452 value, num_bytes);
453
454 if (ret)
455 pr_err("%s: Write failed (mod %d, reg 0x%02x count %d)\n",
456 DRIVER_NAME, mod_no, reg, num_bytes);
457
458 return ret;
459 }
460 EXPORT_SYMBOL(twl_i2c_write);
461
462 /**
463 * twl_i2c_read - Reads a n bit register in TWL4030/TWL5030/TWL60X0
464 * @mod_no: module number
465 * @value: an array of num_bytes containing data to be read
466 * @reg: register address (just offset will do)
467 * @num_bytes: number of bytes to transfer
468 *
469 * Returns 0 on success or else a negative error code.
470 */
twl_i2c_read(u8 mod_no,u8 * value,u8 reg,unsigned num_bytes)471 int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
472 {
473 struct regmap *regmap = twl_get_regmap(mod_no);
474 int ret;
475
476 if (!regmap)
477 return -EPERM;
478
479 ret = regmap_bulk_read(regmap, twl_priv->twl_map[mod_no].base + reg,
480 value, num_bytes);
481
482 if (ret)
483 pr_err("%s: Read failed (mod %d, reg 0x%02x count %d)\n",
484 DRIVER_NAME, mod_no, reg, num_bytes);
485
486 return ret;
487 }
488 EXPORT_SYMBOL(twl_i2c_read);
489
490 /**
491 * twl_set_regcache_bypass - Configure the regcache bypass for the regmap associated
492 * with the module
493 * @mod_no: module number
494 * @enable: Regcache bypass state
495 *
496 * Returns 0 else failure.
497 */
twl_set_regcache_bypass(u8 mod_no,bool enable)498 int twl_set_regcache_bypass(u8 mod_no, bool enable)
499 {
500 struct regmap *regmap = twl_get_regmap(mod_no);
501
502 if (!regmap)
503 return -EPERM;
504
505 regcache_cache_bypass(regmap, enable);
506
507 return 0;
508 }
509 EXPORT_SYMBOL(twl_set_regcache_bypass);
510
511 /*----------------------------------------------------------------------*/
512
513 /**
514 * twl_read_idcode_register - API to read the IDCODE register.
515 *
516 * Unlocks the IDCODE register and read the 32 bit value.
517 */
twl_read_idcode_register(void)518 static int twl_read_idcode_register(void)
519 {
520 int err;
521
522 err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, TWL_EEPROM_R_UNLOCK,
523 REG_UNLOCK_TEST_REG);
524 if (err) {
525 pr_err("TWL4030 Unable to unlock IDCODE registers -%d\n", err);
526 goto fail;
527 }
528
529 err = twl_i2c_read(TWL4030_MODULE_INTBR, (u8 *)(&twl_priv->twl_idcode),
530 REG_IDCODE_7_0, 4);
531 if (err) {
532 pr_err("TWL4030: unable to read IDCODE -%d\n", err);
533 goto fail;
534 }
535
536 err = twl_i2c_write_u8(TWL4030_MODULE_INTBR, 0x0, REG_UNLOCK_TEST_REG);
537 if (err)
538 pr_err("TWL4030 Unable to relock IDCODE registers -%d\n", err);
539 fail:
540 return err;
541 }
542
543 /**
544 * twl_get_type - API to get TWL Si type.
545 *
546 * Api to get the TWL Si type from IDCODE value.
547 */
twl_get_type(void)548 int twl_get_type(void)
549 {
550 return TWL_SIL_TYPE(twl_priv->twl_idcode);
551 }
552 EXPORT_SYMBOL_GPL(twl_get_type);
553
554 /**
555 * twl_get_version - API to get TWL Si version.
556 *
557 * Api to get the TWL Si version from IDCODE value.
558 */
twl_get_version(void)559 int twl_get_version(void)
560 {
561 return TWL_SIL_REV(twl_priv->twl_idcode);
562 }
563 EXPORT_SYMBOL_GPL(twl_get_version);
564
565 /**
566 * twl_get_hfclk_rate - API to get TWL external HFCLK clock rate.
567 *
568 * Api to get the TWL HFCLK rate based on BOOT_CFG register.
569 */
twl_get_hfclk_rate(void)570 int twl_get_hfclk_rate(void)
571 {
572 u8 ctrl;
573 int rate;
574
575 twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &ctrl, R_CFG_BOOT);
576
577 switch (ctrl & 0x3) {
578 case HFCLK_FREQ_19p2_MHZ:
579 rate = 19200000;
580 break;
581 case HFCLK_FREQ_26_MHZ:
582 rate = 26000000;
583 break;
584 case HFCLK_FREQ_38p4_MHZ:
585 rate = 38400000;
586 break;
587 default:
588 pr_err("TWL4030: HFCLK is not configured\n");
589 rate = -EINVAL;
590 break;
591 }
592
593 return rate;
594 }
595 EXPORT_SYMBOL_GPL(twl_get_hfclk_rate);
596
597 static struct device *
add_numbered_child(unsigned mod_no,const char * name,int num,void * pdata,unsigned pdata_len,bool can_wakeup,int irq0,int irq1)598 add_numbered_child(unsigned mod_no, const char *name, int num,
599 void *pdata, unsigned pdata_len,
600 bool can_wakeup, int irq0, int irq1)
601 {
602 struct platform_device *pdev;
603 struct twl_client *twl;
604 int status, sid;
605
606 if (unlikely(mod_no >= twl_get_last_module())) {
607 pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
608 return ERR_PTR(-EPERM);
609 }
610 sid = twl_priv->twl_map[mod_no].sid;
611 twl = &twl_priv->twl_modules[sid];
612
613 pdev = platform_device_alloc(name, num);
614 if (!pdev)
615 return ERR_PTR(-ENOMEM);
616
617 pdev->dev.parent = &twl->client->dev;
618
619 if (pdata) {
620 status = platform_device_add_data(pdev, pdata, pdata_len);
621 if (status < 0) {
622 dev_dbg(&pdev->dev, "can't add platform_data\n");
623 goto put_device;
624 }
625 }
626
627 if (irq0) {
628 struct resource r[2] = {
629 { .start = irq0, .flags = IORESOURCE_IRQ, },
630 { .start = irq1, .flags = IORESOURCE_IRQ, },
631 };
632
633 status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
634 if (status < 0) {
635 dev_dbg(&pdev->dev, "can't add irqs\n");
636 goto put_device;
637 }
638 }
639
640 status = platform_device_add(pdev);
641 if (status)
642 goto put_device;
643
644 device_init_wakeup(&pdev->dev, can_wakeup);
645
646 return &pdev->dev;
647
648 put_device:
649 platform_device_put(pdev);
650 dev_err(&twl->client->dev, "failed to add device %s\n", name);
651 return ERR_PTR(status);
652 }
653
add_child(unsigned mod_no,const char * name,void * pdata,unsigned pdata_len,bool can_wakeup,int irq0,int irq1)654 static inline struct device *add_child(unsigned mod_no, const char *name,
655 void *pdata, unsigned pdata_len,
656 bool can_wakeup, int irq0, int irq1)
657 {
658 return add_numbered_child(mod_no, name, -1, pdata, pdata_len,
659 can_wakeup, irq0, irq1);
660 }
661
662 /*----------------------------------------------------------------------*/
663
664 /*
665 * These three functions initialize the on-chip clock framework,
666 * letting it generate the right frequencies for USB, MADC, and
667 * other purposes.
668 */
protect_pm_master(void)669 static inline int protect_pm_master(void)
670 {
671 int e = 0;
672
673 e = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
674 TWL4030_PM_MASTER_PROTECT_KEY);
675 return e;
676 }
677
unprotect_pm_master(void)678 static inline int unprotect_pm_master(void)
679 {
680 int e = 0;
681
682 e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
683 TWL4030_PM_MASTER_PROTECT_KEY);
684 e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
685 TWL4030_PM_MASTER_PROTECT_KEY);
686
687 return e;
688 }
689
clocks_init(struct device * dev)690 static void clocks_init(struct device *dev)
691 {
692 int e = 0;
693 struct clk *osc;
694 u32 rate;
695 u8 ctrl = HFCLK_FREQ_26_MHZ;
696
697 osc = clk_get(dev, "fck");
698 if (IS_ERR(osc)) {
699 printk(KERN_WARNING "Skipping twl internal clock init and "
700 "using bootloader value (unknown osc rate)\n");
701 return;
702 }
703
704 rate = clk_get_rate(osc);
705 clk_put(osc);
706
707 switch (rate) {
708 case 19200000:
709 ctrl = HFCLK_FREQ_19p2_MHZ;
710 break;
711 case 26000000:
712 ctrl = HFCLK_FREQ_26_MHZ;
713 break;
714 case 38400000:
715 ctrl = HFCLK_FREQ_38p4_MHZ;
716 break;
717 }
718
719 ctrl |= HIGH_PERF_SQ;
720
721 e |= unprotect_pm_master();
722 /* effect->MADC+USB ck en */
723 e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
724 e |= protect_pm_master();
725
726 if (e < 0)
727 pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
728 }
729
730 /*----------------------------------------------------------------------*/
731
732
twl_remove(struct i2c_client * client)733 static void twl_remove(struct i2c_client *client)
734 {
735 unsigned i, num_slaves;
736
737 if (twl_class_is_4030())
738 twl4030_exit_irq();
739 else
740 twl6030_exit_irq();
741
742 num_slaves = twl_get_num_slaves();
743 for (i = 0; i < num_slaves; i++) {
744 struct twl_client *twl = &twl_priv->twl_modules[i];
745
746 if (twl->client && twl->client != client)
747 i2c_unregister_device(twl->client);
748 twl->client = NULL;
749 }
750 twl_priv->ready = false;
751 }
752
753 static struct of_dev_auxdata twl_auxdata_lookup[] = {
754 OF_DEV_AUXDATA("ti,twl4030-gpio", 0, "twl4030-gpio", NULL),
755 { /* sentinel */ },
756 };
757
758 /* NOTE: This driver only handles a single twl4030/tps659x0 chip */
759 static int
twl_probe(struct i2c_client * client)760 twl_probe(struct i2c_client *client)
761 {
762 const struct i2c_device_id *id = i2c_client_get_device_id(client);
763 struct device_node *node = client->dev.of_node;
764 struct platform_device *pdev;
765 const struct regmap_config *twl_regmap_config;
766 int irq_base = 0;
767 int status;
768 unsigned i, num_slaves;
769
770 if (!node) {
771 dev_err(&client->dev, "no platform data\n");
772 return -EINVAL;
773 }
774
775 if (twl_priv) {
776 dev_dbg(&client->dev, "only one instance of %s allowed\n",
777 DRIVER_NAME);
778 return -EBUSY;
779 }
780
781 pdev = platform_device_alloc(DRIVER_NAME, -1);
782 if (!pdev) {
783 dev_err(&client->dev, "can't alloc pdev\n");
784 return -ENOMEM;
785 }
786
787 status = platform_device_add(pdev);
788 if (status) {
789 platform_device_put(pdev);
790 return status;
791 }
792
793 if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
794 dev_dbg(&client->dev, "can't talk I2C?\n");
795 status = -EIO;
796 goto free;
797 }
798
799 twl_priv = devm_kzalloc(&client->dev, sizeof(struct twl_private),
800 GFP_KERNEL);
801 if (!twl_priv) {
802 status = -ENOMEM;
803 goto free;
804 }
805
806 if ((id->driver_data) & TWL6030_CLASS) {
807 twl_priv->twl_id = TWL6030_CLASS_ID;
808 twl_priv->twl_map = &twl6030_map[0];
809 twl_regmap_config = twl6030_regmap_config;
810 } else {
811 twl_priv->twl_id = TWL4030_CLASS_ID;
812 twl_priv->twl_map = &twl4030_map[0];
813 twl_regmap_config = twl4030_regmap_config;
814 }
815
816 num_slaves = twl_get_num_slaves();
817 twl_priv->twl_modules = devm_kcalloc(&client->dev,
818 num_slaves,
819 sizeof(struct twl_client),
820 GFP_KERNEL);
821 if (!twl_priv->twl_modules) {
822 status = -ENOMEM;
823 goto free;
824 }
825
826 for (i = 0; i < num_slaves; i++) {
827 struct twl_client *twl = &twl_priv->twl_modules[i];
828
829 if (i == 0) {
830 twl->client = client;
831 } else {
832 twl->client = i2c_new_dummy_device(client->adapter,
833 client->addr + i);
834 if (IS_ERR(twl->client)) {
835 dev_err(&client->dev,
836 "can't attach client %d\n", i);
837 status = PTR_ERR(twl->client);
838 goto fail;
839 }
840 }
841
842 twl->regmap = devm_regmap_init_i2c(twl->client,
843 &twl_regmap_config[i]);
844 if (IS_ERR(twl->regmap)) {
845 status = PTR_ERR(twl->regmap);
846 dev_err(&client->dev,
847 "Failed to allocate regmap %d, err: %d\n", i,
848 status);
849 goto fail;
850 }
851 }
852
853 twl_priv->ready = true;
854
855 /* setup clock framework */
856 clocks_init(&client->dev);
857
858 /* read TWL IDCODE Register */
859 if (twl_class_is_4030()) {
860 status = twl_read_idcode_register();
861 WARN(status < 0, "Error: reading twl_idcode register value\n");
862 }
863
864 /* Maybe init the T2 Interrupt subsystem */
865 if (client->irq) {
866 if (twl_class_is_4030()) {
867 twl4030_init_chip_irq(id->name);
868 irq_base = twl4030_init_irq(&client->dev, client->irq);
869 } else {
870 irq_base = twl6030_init_irq(&client->dev, client->irq);
871 }
872
873 if (irq_base < 0) {
874 status = irq_base;
875 goto fail;
876 }
877 }
878
879 /*
880 * Disable TWL4030/TWL5030 I2C Pull-up on I2C1 and I2C4(SR) interface.
881 * Program I2C_SCL_CTRL_PU(bit 0)=0, I2C_SDA_CTRL_PU (bit 2)=0,
882 * SR_I2C_SCL_CTRL_PU(bit 4)=0 and SR_I2C_SDA_CTRL_PU(bit 6)=0.
883 *
884 * Also, always enable SmartReflex bit as that's needed for omaps to
885 * do anything over I2C4 for voltage scaling even if SmartReflex
886 * is disabled. Without the SmartReflex bit omap sys_clkreq idle
887 * signal will never trigger for retention idle.
888 */
889 if (twl_class_is_4030()) {
890 u8 temp;
891
892 twl_i2c_read_u8(TWL4030_MODULE_INTBR, &temp, REG_GPPUPDCTR1);
893 temp &= ~(SR_I2C_SDA_CTRL_PU | SR_I2C_SCL_CTRL_PU | \
894 I2C_SDA_CTRL_PU | I2C_SCL_CTRL_PU);
895 twl_i2c_write_u8(TWL4030_MODULE_INTBR, temp, REG_GPPUPDCTR1);
896
897 twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
898 TWL4030_DCDC_GLOBAL_CFG);
899 temp |= SMARTREFLEX_ENABLE;
900 twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
901 TWL4030_DCDC_GLOBAL_CFG);
902 }
903
904 status = of_platform_populate(node, NULL, twl_auxdata_lookup,
905 &client->dev);
906
907 fail:
908 if (status < 0)
909 twl_remove(client);
910 free:
911 if (status < 0)
912 platform_device_unregister(pdev);
913
914 return status;
915 }
916
twl_suspend(struct device * dev)917 static int __maybe_unused twl_suspend(struct device *dev)
918 {
919 struct i2c_client *client = to_i2c_client(dev);
920
921 if (client->irq)
922 disable_irq(client->irq);
923
924 return 0;
925 }
926
twl_resume(struct device * dev)927 static int __maybe_unused twl_resume(struct device *dev)
928 {
929 struct i2c_client *client = to_i2c_client(dev);
930
931 if (client->irq)
932 enable_irq(client->irq);
933
934 return 0;
935 }
936
937 static SIMPLE_DEV_PM_OPS(twl_dev_pm_ops, twl_suspend, twl_resume);
938
939 static const struct i2c_device_id twl_ids[] = {
940 { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
941 { "twl5030", 0 }, /* T2 updated */
942 { "twl5031", TWL5031 }, /* TWL5030 updated */
943 { "tps65950", 0 }, /* catalog version of twl5030 */
944 { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
945 { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
946 { "tps65921", TPS_SUBSET }, /* fewer LDOs; no codec, no LED
947 and vibrator. Charger in USB module*/
948 { "twl6030", TWL6030_CLASS }, /* "Phoenix power chip" */
949 { "twl6032", TWL6030_CLASS | TWL6032_SUBCLASS }, /* "Phoenix lite" */
950 { /* end of list */ },
951 };
952
953 /* One Client Driver , 4 Clients */
954 static struct i2c_driver twl_driver = {
955 .driver.name = DRIVER_NAME,
956 .driver.pm = &twl_dev_pm_ops,
957 .id_table = twl_ids,
958 .probe_new = twl_probe,
959 .remove = twl_remove,
960 };
961 builtin_i2c_driver(twl_driver);
962