1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: LEDs connected to GPIO lines
8
9maintainers:
10  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
11  - Pavel Machek <pavel@ucw.cz>
12
13description:
14  Each LED is represented as a sub-node of the gpio-leds device.  Each
15  node's name represents the name of the corresponding LED.
16
17properties:
18  compatible:
19    const: gpio-leds
20
21patternProperties:
22  # The first form is preferred, but fall back to just 'led' anywhere in the
23  # node name to at least catch some child nodes.
24  "(^led-[0-9a-f]$|led)":
25    type: object
26    $ref: common.yaml#
27    unevaluatedProperties: false
28
29    properties:
30      gpios:
31        maxItems: 1
32
33      retain-state-suspended:
34        description:
35          The suspend state can be retained.Such as charge-led gpio.
36        type: boolean
37
38      retain-state-shutdown:
39        description:
40          Retain the state of the LED on shutdown. Useful in BMC systems, for
41          example when the BMC is rebooted while the host remains up.
42        type: boolean
43
44    required:
45      - gpios
46
47additionalProperties: false
48
49examples:
50  - |
51
52    #include <dt-bindings/gpio/gpio.h>
53    #include <dt-bindings/leds/common.h>
54
55    leds {
56        compatible = "gpio-leds";
57        led-0 {
58            gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
59            linux,default-trigger = "disk-activity";
60            function = LED_FUNCTION_DISK;
61        };
62
63        led-1 {
64            gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
65            /* Keep LED on if BIOS detected hardware fault */
66            default-state = "keep";
67            function = LED_FUNCTION_FAULT;
68        };
69    };
70
71    run-control {
72        compatible = "gpio-leds";
73        led-0 {
74            gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
75            color = <LED_COLOR_ID_RED>;
76            default-state = "off";
77        };
78        led-1 {
79            gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
80            color = <LED_COLOR_ID_GREEN>;
81            default-state = "on";
82        };
83    };
84
85...
86