1 /**
2 * \file error.h
3 *
4 * \brief Error to string translation
5 */
6 /*
7 * Copyright The Mbed TLS Contributors
8 * SPDX-License-Identifier: Apache-2.0
9 *
10 * Licensed under the Apache License, Version 2.0 (the "License"); you may
11 * not use this file except in compliance with the License.
12 * You may obtain a copy of the License at
13 *
14 * http://www.apache.org/licenses/LICENSE-2.0
15 *
16 * Unless required by applicable law or agreed to in writing, software
17 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
18 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
19 * See the License for the specific language governing permissions and
20 * limitations under the License.
21 */
22 #ifndef MBEDTLS_ERROR_H
23 #define MBEDTLS_ERROR_H
24
25 #include "mbedtls/build_info.h"
26
27 #include <stddef.h>
28
29 #if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
30 !defined(inline) && !defined(__cplusplus)
31 #define inline __inline
32 #endif
33
34 /**
35 * Error code layout.
36 *
37 * Currently we try to keep all error codes within the negative space of 16
38 * bits signed integers to support all platforms (-0x0001 - -0x7FFF). In
39 * addition we'd like to give two layers of information on the error if
40 * possible.
41 *
42 * For that purpose the error codes are segmented in the following manner:
43 *
44 * 16 bit error code bit-segmentation
45 *
46 * 1 bit - Unused (sign bit)
47 * 3 bits - High level module ID
48 * 5 bits - Module-dependent error code
49 * 7 bits - Low level module errors
50 *
51 * For historical reasons, low-level error codes are divided in even and odd,
52 * even codes were assigned first, and -1 is reserved for other errors.
53 *
54 * Low-level module errors (0x0002-0x007E, 0x0001-0x007F)
55 *
56 * Module Nr Codes assigned
57 * ERROR 2 0x006E 0x0001
58 * MPI 7 0x0002-0x0010
59 * GCM 3 0x0012-0x0016 0x0013-0x0013
60 * THREADING 3 0x001A-0x001E
61 * AES 5 0x0020-0x0022 0x0021-0x0025
62 * CAMELLIA 3 0x0024-0x0026 0x0027-0x0027
63 * BASE64 2 0x002A-0x002C
64 * OID 1 0x002E-0x002E 0x000B-0x000B
65 * PADLOCK 1 0x0030-0x0030
66 * DES 2 0x0032-0x0032 0x0033-0x0033
67 * CTR_DBRG 4 0x0034-0x003A
68 * ENTROPY 3 0x003C-0x0040 0x003D-0x003F
69 * NET 13 0x0042-0x0052 0x0043-0x0049
70 * ARIA 4 0x0058-0x005E
71 * ASN1 7 0x0060-0x006C
72 * CMAC 1 0x007A-0x007A
73 * PBKDF2 1 0x007C-0x007C
74 * HMAC_DRBG 4 0x0003-0x0009
75 * CCM 3 0x000D-0x0011
76 * MD5 1 0x002F-0x002F
77 * RIPEMD160 1 0x0031-0x0031
78 * SHA1 1 0x0035-0x0035 0x0073-0x0073
79 * SHA256 1 0x0037-0x0037 0x0074-0x0074
80 * SHA512 1 0x0039-0x0039 0x0075-0x0075
81 * CHACHA20 3 0x0051-0x0055
82 * POLY1305 3 0x0057-0x005B
83 * CHACHAPOLY 2 0x0054-0x0056
84 * PLATFORM 2 0x0070-0x0072
85 *
86 * High-level module nr (3 bits - 0x0...-0x7...)
87 * Name ID Nr of Errors
88 * PEM 1 9
89 * PKCS#12 1 4 (Started from top)
90 * X509 2 20
91 * PKCS5 2 4 (Started from top)
92 * DHM 3 11
93 * PK 3 15 (Started from top)
94 * RSA 4 11
95 * ECP 4 10 (Started from top)
96 * MD 5 5
97 * HKDF 5 1 (Started from top)
98 * SSL 5 2 (Started from 0x5F00)
99 * CIPHER 6 8 (Started from 0x6080)
100 * SSL 6 22 (Started from top, plus 0x6000)
101 * SSL 7 20 (Started from 0x7000, gaps at
102 * 0x7380, 0x7900-0x7980, 0x7A80-0x7E80)
103 *
104 * Module dependent error code (5 bits 0x.00.-0x.F8.)
105 */
106
107 #ifdef __cplusplus
108 extern "C" {
109 #endif
110
111 /** Generic error */
112 #define MBEDTLS_ERR_ERROR_GENERIC_ERROR -0x0001
113 /** This is a bug in the library */
114 #define MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED -0x006E
115
116 /** Hardware accelerator failed */
117 #define MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED -0x0070
118 /** The requested feature is not supported by the platform */
119 #define MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED -0x0072
120
121 /**
122 * \brief Combines a high-level and low-level error code together.
123 *
124 * Wrapper macro for mbedtls_error_add(). See that function for
125 * more details.
126 */
127 #define MBEDTLS_ERROR_ADD( high, low ) \
128 mbedtls_error_add( high, low, __FILE__, __LINE__ )
129
130 #if defined(MBEDTLS_TEST_HOOKS)
131 /**
132 * \brief Testing hook called before adding/combining two error codes together.
133 * Only used when invasive testing is enabled via MBEDTLS_TEST_HOOKS.
134 */
135 extern void (*mbedtls_test_hook_error_add)( int, int, const char *, int );
136 #endif
137
138 /**
139 * \brief Combines a high-level and low-level error code together.
140 *
141 * This function can be called directly however it is usually
142 * called via the #MBEDTLS_ERROR_ADD macro.
143 *
144 * While a value of zero is not a negative error code, it is still an
145 * error code (that denotes success) and can be combined with both a
146 * negative error code or another value of zero.
147 *
148 * \note When invasive testing is enabled via #MBEDTLS_TEST_HOOKS, also try to
149 * call \link mbedtls_test_hook_error_add \endlink.
150 *
151 * \param high high-level error code. See error.h for more details.
152 * \param low low-level error code. See error.h for more details.
153 * \param file file where this error code addition occurred.
154 * \param line line where this error code addition occurred.
155 */
mbedtls_error_add(int high,int low,const char * file,int line)156 static inline int mbedtls_error_add( int high, int low,
157 const char *file, int line )
158 {
159 #if defined(MBEDTLS_TEST_HOOKS)
160 if( *mbedtls_test_hook_error_add != NULL )
161 ( *mbedtls_test_hook_error_add )( high, low, file, line );
162 #endif
163 (void)file;
164 (void)line;
165
166 return( high + low );
167 }
168
169 /**
170 * \brief Translate a mbed TLS error code into a string representation,
171 * Result is truncated if necessary and always includes a terminating
172 * null byte.
173 *
174 * \param errnum error code
175 * \param buffer buffer to place representation in
176 * \param buflen length of the buffer
177 */
178 void mbedtls_strerror( int errnum, char *buffer, size_t buflen );
179
180 /**
181 * \brief Translate the high-level part of an Mbed TLS error code into a string
182 * representation.
183 *
184 * This function returns a const pointer to an un-modifiable string. The caller
185 * must not try to modify the string. It is intended to be used mostly for
186 * logging purposes.
187 *
188 * \param error_code error code
189 *
190 * \return The string representation of the error code, or \c NULL if the error
191 * code is unknown.
192 */
193 const char * mbedtls_high_level_strerr( int error_code );
194
195 /**
196 * \brief Translate the low-level part of an Mbed TLS error code into a string
197 * representation.
198 *
199 * This function returns a const pointer to an un-modifiable string. The caller
200 * must not try to modify the string. It is intended to be used mostly for
201 * logging purposes.
202 *
203 * \param error_code error code
204 *
205 * \return The string representation of the error code, or \c NULL if the error
206 * code is unknown.
207 */
208 const char * mbedtls_low_level_strerr( int error_code );
209
210 #ifdef __cplusplus
211 }
212 #endif
213
214 #endif /* error.h */
215