| /linux-6.3-rc2/drivers/net/phy/ |
| A D | ste10Xp.c | 39 value |= BMCR_RESET; in ste10Xp_config_init()
46 } while (value & BMCR_RESET); in ste10Xp_config_init()
|
| A D | et1011c.c | 56 phy_write(phydev, MII_BMCR, ctl | BMCR_RESET); in et1011c_config_aneg()
|
| A D | motorcomm.c | 1336 if (set == BMCR_RESET) { in yt8521_modify_bmcr_paged()
1343 if (!(ret & BMCR_RESET)) in yt8521_modify_bmcr_paged()
1398 return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_RESET); in yt8521_soft_reset()
|
| A D | icplus.c | 125 MII_BMCR, BMCR_RESET); in ip175c_config_init()
|
| A D | marvell-88x2222.c | 104 BMCR_ANENABLE | BMCR_RESET); in mv2222_enable_aneg()
|
| A D | phy.c | 349 if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) { in phy_mii_ioctl()
392 val & BMCR_RESET) in phy_mii_ioctl()
|
| /linux-6.3-rc2/drivers/net/ethernet/ibm/emac/ |
| A D | phy.c | 62 val |= BMCR_RESET; in emac_mii_reset_phy()
69 if (val >= 0 && (val & BMCR_RESET) == 0) in emac_mii_reset_phy()
86 val |= BMCR_RESET; in emac_mii_reset_gpcs()
93 if (val >= 0 && (val & BMCR_RESET) == 0) in emac_mii_reset_gpcs()
184 phy_write(phy, MII_BMCR, ctl | BMCR_RESET); in genmii_setup_forced()
|
| /linux-6.3-rc2/drivers/net/pcs/ |
| A D | pcs-altera-tse.c | 58 bmcr |= BMCR_RESET; in tse_pcs_reset()
61 return read_poll_timeout(tse_pcs_read, bmcr, (bmcr & BMCR_RESET), in tse_pcs_reset()
|
| /linux-6.3-rc2/drivers/net/ |
| A D | sungem_phy.c | 74 val |= BMCR_RESET; in reset_one_mii_phy()
81 if ((val & BMCR_RESET) == 0) in reset_one_mii_phy()
295 sungem_phy_write(phy, MII_BMCR, BMCR_RESET); in bcm5411_init()
354 sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET); in genmii_setup_forced()
523 sungem_phy_write(phy, MII_BMCR, ctl | BMCR_RESET); in bcm54xx_setup_forced()
804 ctl |= BMCR_RESET; in marvell_setup_forced()
|
| /linux-6.3-rc2/drivers/net/ethernet/broadcom/ |
| A D | bgmac-bcma-mdio.c | 187 bcma_mdio_phy_write(bgmac, phyaddr, MII_BMCR, BMCR_RESET); in bcma_mdio_phy_reset()
189 if (bcma_mdio_phy_read(bgmac, phyaddr, MII_BMCR) & BMCR_RESET) in bcma_mdio_phy_reset()
|
| /linux-6.3-rc2/include/uapi/linux/ |
| A D | mii.h | 51 #define BMCR_RESET 0x8000 /* Reset to default state */ macro
|
| A D | mdio.h | 101 #define MDIO_CTRL1_RESET BMCR_RESET
|
| /linux-6.3-rc2/drivers/net/ethernet/chelsio/cxgb/ |
| A D | mv88e1xxx.c | 53 mdio_set_bit(cphy, MII_BMCR, BMCR_RESET); in mv88e1xxx_reset()
57 ctl &= BMCR_RESET; in mv88e1xxx_reset()
|
| /linux-6.3-rc2/drivers/net/ethernet/dec/tulip/ |
| A D | media.c | 271 (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) in tulip_select_media()
298 (tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET)) in tulip_select_media()
520 BMCR_RESET); in tulip_find_mii()
|
| /linux-6.3-rc2/drivers/net/mdio/ |
| A D | mdio-moxart.c | 102 data |= BMCR_RESET; in moxart_mdio_reset()
|
| /linux-6.3-rc2/drivers/net/ethernet/atheros/atl1e/ |
| A D | atl1e_hw.c | 380 phy_data = BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART; in atl1e_phy_commit()
634 BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART); in atl1e_restart_autoneg()
|
| /linux-6.3-rc2/drivers/net/ethernet/dlink/ |
| A D | dl2k.c | 1612 mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET); in mii_set_media()
1613 bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET; in mii_set_media()
1625 bmcr |= BMCR_RESET; in mii_set_media()
1744 mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET); in mii_set_media_pcs()
1745 bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET; in mii_set_media_pcs()
1751 bmcr = BMCR_RESET; in mii_set_media_pcs()
|
| /linux-6.3-rc2/drivers/net/ethernet/sun/ |
| A D | sunbmac.c | 502 bp->sw_bmcr = (BMCR_RESET); in try_next_permutation()
508 if ((bp->sw_bmcr & BMCR_RESET) == 0) in try_next_permutation()
595 bp->sw_bmcr = (BMCR_RESET); in bigmac_begin_auto_negotiation()
601 if ((bp->sw_bmcr & BMCR_RESET) == 0) in bigmac_begin_auto_negotiation()
|
| /linux-6.3-rc2/arch/powerpc/platforms/85xx/ |
| A D | mpc85xx_mds.c | 79 err = phy_write(phydev, MII_BMCR, BMCR_RESET); in mpc8568_fixup_125_clock()
|
| /linux-6.3-rc2/drivers/net/ethernet/oki-semi/pch_gbe/ |
| A D | pch_gbe_phy.c | 310 pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET); in pch_gbe_phy_init_setting()
|
| A D | pch_gbe_ethtool.c | 119 pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET); in pch_gbe_set_link_ksettings()
|
| /linux-6.3-rc2/drivers/net/ethernet/atheros/atl1c/ |
| A D | atl1c_hw.c | 595 u16 mii_bmcr_data = BMCR_RESET; in atl1c_phy_init()
770 u16 mii_bmcr_data = BMCR_RESET; in atl1c_restart_autoneg()
|
| /linux-6.3-rc2/drivers/net/usb/ |
| A D | asix_devices.c | 216 & BMCR_RESET) in asix_phy_reset()
275 asix_phy_reset(dev, BMCR_RESET); in ax88172_bind()
1104 asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE); in ax88178_reset()
|
| A D | sr9700.c | 372 sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET); in sr9700_bind()
|
| /linux-6.3-rc2/drivers/net/ethernet/adaptec/ |
| A D | starfire.c | 791 mdio_write(dev, phy, MII_BMCR, BMCR_RESET); in starfire_init_one()
795 if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0) in starfire_init_one()
1069 mdio_write(dev, np->phys[0], MII_BMCR, BMCR_RESET); in check_duplex()
1071 while (--silly_count && mdio_read(dev, np->phys[0], MII_BMCR) & BMCR_RESET) in check_duplex()
|