| /linux-6.3-rc2/drivers/pinctrl/ |
| A D | pinctrl-xway.c | 118 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY),
183 static const unsigned pins_gphy0_led2[] = {GPIO2};
207 static const unsigned pins_exin2[] = {GPIO2};
227 static const unsigned pins_clkout3[] = {GPIO2};
354 MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY),
400 static const unsigned ase_pins_dfe_led1[] = {GPIO2};
482 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, MII),
518 static const unsigned danube_pins_exin2[] = {GPIO2};
657 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE),
870 MFP_XWAY(GPIO2, GPIO, CGU, EXIN, GPHY),
[all …]
|
| A D | pinctrl-lantiq.h | 109 GPIO2, enumerator
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/sound/ |
| A D | cirrus,cs35l41.yaml | 110 Note that the options are different from the GPIO2 pin
121 Boolean which specifies whether the GPIO2
127 Boolean which specifies whether the GPIO2 pin
134 Configures the function of the GPIO2 pin.
|
| A D | rt5660.txt | 26 1: using GPIO2 pin as dmic1 data pin
|
| A D | rt5668.txt | 17 1: using GPIO2 pin as dmic1 data pin
|
| A D | rt5677.txt | 39 Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
|
| A D | rt5640.txt | 44 4: Use GPIO2 for jack-detect
|
| /linux-6.3-rc2/arch/sh/kernel/cpu/sh4a/ |
| A D | setup-shx3.c | 185 GPIO0, GPIO1, GPIO2, GPIO3, enumerator
233 INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
267 DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
303 GPIO2, GPIO1, GPIO0, IRM } },
|
| /linux-6.3-rc2/drivers/media/usb/dvb-usb/ |
| A D | dib07x0.h | 8 GPIO2 = 3, enumerator
|
| /linux-6.3-rc2/arch/arm64/boot/dts/rockchip/ |
| A D | rk3399-gru-chromebook.dtsi | 325 gpio-line-names = /* GPIO2 A 0-7 */
335 /* GPIO2 B 0-7 */
345 /* GPIO2 C 0-7 */
355 /* GPIO2 D 0-4 */
|
| A D | rk3399-gru-scarlet.dtsi | 468 gpio-line-names = /* GPIO2 A 0-7 */
478 /* GPIO2 B 0-7 */
488 /* GPIO2 C 0-7 */
498 /* GPIO2 D 0-4 */
|
| /linux-6.3-rc2/arch/arm/mach-pxa/ |
| A D | pxa300.c | 26 MFP_ADDR_X(GPIO0, GPIO2, 0x00b4),
|
| /linux-6.3-rc2/arch/arm64/boot/dts/freescale/ |
| A D | imx8mp-msc-sm2s-ep1.dts | 39 <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19>, /* GPIO2 */
|
| /linux-6.3-rc2/include/linux/mfd/ |
| A D | tps65010.h | 118 #define GPIO2 2 macro
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/gpio/ |
| A D | x-powers,axp209-gpio.yaml | 45 - GPIO2
|
| A D | xylon,logicvc-gpio.yaml | 68 gpio-line-names = "GPIO0", "GPIO1", "GPIO2", "GPIO3", "GPIO4",
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/pinctrl/ |
| A D | ste,nomadik.txt | 114 pins = "GPIO0", "GPIO2";
125 pins = "GPIO0", "GPIO2";
|
| /linux-6.3-rc2/arch/arm/boot/dts/ |
| A D | bcm2835-rpi-cm1-io1.dts | 21 "GPIO2",
|
| A D | bcm2837-rpi-cm3-io3.dts | 21 "GPIO2",
|
| A D | ste-snowball.dts | 416 * the second is "GPIO2" and so forth. Confusingly, the
417 * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
421 "PM_GPIO1", /* AB8500 GPIO2 */
|
| /linux-6.3-rc2/Documentation/arm/ |
| A D | netwinder.rst | 33 0x033a GPIO2
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/clock/ |
| A D | ti-clkctrl.txt | 58 Example: Clock consumer node for GPIO2:
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/mfd/ |
| A D | max77620.txt | 34 and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed
46 Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power
|
| /linux-6.3-rc2/drivers/media/pci/cx23885/ |
| A D | cx23885-reg.h | 88 #define GPIO2 0x00000164 macro
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/interrupt-controller/ |
| A D | brcm,bcm2835-armctrl-ic.txt | 98 19: GPIO2
|