| /linux-6.3-rc2/drivers/mtd/nand/raw/ |
| A D | mxic_nand.c | 42 #define INT_STS 0x4 macro
288 sts = readl(nfc->regs + INT_STS); in mxic_nfc_isr()
356 ret = readl_poll_timeout(nfc->regs + INT_STS, sts, in mxic_nfc_data_xfer()
363 ret = readl_poll_timeout(nfc->regs + INT_STS, sts, in mxic_nfc_data_xfer()
368 ret = readl_poll_timeout(nfc->regs + INT_STS, sts, in mxic_nfc_data_xfer()
379 if (readl(nfc->regs + INT_STS) & INT_RX_NOT_EMPTY) in mxic_nfc_data_xfer()
|
| /linux-6.3-rc2/drivers/spi/ |
| A D | spi-mxic.c | 43 #define INT_STS 0x4 macro
359 ret = readl_poll_timeout(mxic->regs + INT_STS, sts, in mxic_spi_data_xfer()
366 ret = readl_poll_timeout(mxic->regs + INT_STS, sts, in mxic_spi_data_xfer()
371 ret = readl_poll_timeout(mxic->regs + INT_STS, sts, in mxic_spi_data_xfer()
382 WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY); in mxic_spi_data_xfer()
422 writel(INT_LRD_DIS, mxic->regs + INT_STS); in mxic_spi_mem_dirmap_read()
425 ret = readl_poll_timeout(mxic->regs + INT_STS, sts, in mxic_spi_mem_dirmap_read()
466 writel(INT_LWR_DIS, mxic->regs + INT_STS); in mxic_spi_mem_dirmap_write()
469 ret = readl_poll_timeout(mxic->regs + INT_STS, sts, in mxic_spi_mem_dirmap_write()
|
| /linux-6.3-rc2/drivers/net/usb/ |
| A D | smsc95xx.h | 51 #define INT_STS (0x08) macro
|
| A D | smsc75xx.h | 60 #define INT_STS (0x000C) macro
|
| A D | lan78xx.h | 105 #define INT_STS (0x0C) macro
|
| A D | smsc75xx.c | 637 ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); in smsc75xx_link_reset()
1246 ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); in smsc75xx_reset()
|
| A D | lan78xx.c | 328 INT_STS,
1425 ret = lan78xx_write_reg(dev, INT_STS, INT_STS_PHY_INT_); in lan78xx_link_reset()
2975 ret = lan78xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_); in lan78xx_reset()
|
| A D | smsc95xx.c | 995 ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_); in smsc95xx_reset()
|
| /linux-6.3-rc2/drivers/net/ethernet/smsc/ |
| A D | smsc911x.h | 112 #define INT_STS 0x58 macro
|
| A D | smsc911x.c | 1228 smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); in smsc911x_poll()
1525 smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); in smsc911x_disable_irq_chip()
1532 u32 intsts = smsc911x_reg_read(pdata, INT_STS); in smsc911x_irqhandler()
1541 smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); in smsc911x_irqhandler()
1551 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); in smsc911x_irqhandler()
1561 smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); in smsc911x_irqhandler()
1568 smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); in smsc911x_irqhandler()
|
| /linux-6.3-rc2/drivers/usb/typec/ |
| A D | anx7411.c | 140 #define INT_STS 0xB7 macro
916 ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf); in anx7411_work_func()
933 ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); in anx7411_work_func()
1271 ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); in anx7411_typec_check_connection()
|
| /linux-6.3-rc2/drivers/net/ethernet/microchip/ |
| A D | lan743x_main.h | 374 #define INT_STS (0x780) macro
|
| A D | lan743x_ethtool.c | 1204 rb[ETH_INT_STS] = lan743x_csr_read(adapter, INT_STS); in lan743x_common_regs()
|
| A D | lan743x_main.c | 348 int_sts = lan743x_csr_read(adapter, INT_STS); in lan743x_intr_entry_isr()
2211 lan743x_csr_read(adapter, INT_STS); in lan743x_tx_napi_poll()
|
| /linux-6.3-rc2/drivers/gpu/drm/bridge/ |
| A D | ite-it6505.c | 77 #define INT_STS BIT(0) macro
|