1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) ST-Ericsson SA 2010-2013
4 * Author: Rickard Andersson <rickard.andersson@stericsson.com> for
5 * ST-Ericsson.
6 * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro.
7 * Author: Ulf Hansson <ulf.hansson@linaro.org> for Linaro.
8 */
9
10 #include <linux/kernel.h>
11 #include <linux/irqchip/arm-gic.h>
12 #include <linux/delay.h>
13 #include <linux/io.h>
14 #include <linux/suspend.h>
15 #include <linux/platform_data/arm-ux500-pm.h>
16 #include <linux/of.h>
17 #include <linux/of_address.h>
18
19 /* ARM WFI Standby signal register */
20 #define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130)
21 #define PRCM_ARM_WFI_STANDBY_WFI0 0x08
22 #define PRCM_ARM_WFI_STANDBY_WFI1 0x10
23 #define PRCM_IOCR (prcmu_base + 0x310)
24 #define PRCM_IOCR_IOFORCE 0x1
25
26 /* Dual A9 core interrupt management unit registers */
27 #define PRCM_A9_MASK_REQ (prcmu_base + 0x328)
28 #define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1
29
30 #define PRCM_A9_MASK_ACK (prcmu_base + 0x32c)
31 #define PRCM_ARMITMSK31TO0 (prcmu_base + 0x11c)
32 #define PRCM_ARMITMSK63TO32 (prcmu_base + 0x120)
33 #define PRCM_ARMITMSK95TO64 (prcmu_base + 0x124)
34 #define PRCM_ARMITMSK127TO96 (prcmu_base + 0x128)
35 #define PRCM_POWER_STATE_VAL (prcmu_base + 0x25C)
36 #define PRCM_ARMITVAL31TO0 (prcmu_base + 0x260)
37 #define PRCM_ARMITVAL63TO32 (prcmu_base + 0x264)
38 #define PRCM_ARMITVAL95TO64 (prcmu_base + 0x268)
39 #define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C)
40
41 static void __iomem *prcmu_base;
42 static void __iomem *dist_base;
43
44 /* This function decouple the gic from the prcmu */
prcmu_gic_decouple(void)45 int prcmu_gic_decouple(void)
46 {
47 u32 val = readl(PRCM_A9_MASK_REQ);
48
49 /* Set bit 0 register value to 1 */
50 writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ,
51 PRCM_A9_MASK_REQ);
52
53 /* Make sure the register is updated */
54 readl(PRCM_A9_MASK_REQ);
55
56 /* Wait a few cycles for the gic mask completion */
57 udelay(1);
58
59 return 0;
60 }
61
62 /* This function recouple the gic with the prcmu */
prcmu_gic_recouple(void)63 int prcmu_gic_recouple(void)
64 {
65 u32 val = readl(PRCM_A9_MASK_REQ);
66
67 /* Set bit 0 register value to 0 */
68 writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ);
69
70 return 0;
71 }
72
73 #define PRCMU_GIC_NUMBER_REGS 5
74
75 /*
76 * This function checks if there are pending irq on the gic. It only
77 * makes sense if the gic has been decoupled before with the
78 * db8500_prcmu_gic_decouple function. Disabling an interrupt only
79 * disables the forwarding of the interrupt to any CPU interface. It
80 * does not prevent the interrupt from changing state, for example
81 * becoming pending, or active and pending if it is already
82 * active. Hence, we have to check the interrupt is pending *and* is
83 * active.
84 */
prcmu_gic_pending_irq(void)85 bool prcmu_gic_pending_irq(void)
86 {
87 u32 pr; /* Pending register */
88 u32 er; /* Enable register */
89 int i;
90
91 /* 5 registers. STI & PPI not skipped */
92 for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) {
93
94 pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4);
95 er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
96
97 if (pr & er)
98 return true; /* There is a pending interrupt */
99 }
100
101 return false;
102 }
103
104 /*
105 * This function checks if there are pending interrupt on the
106 * prcmu which has been delegated to monitor the irqs with the
107 * db8500_prcmu_copy_gic_settings function.
108 */
prcmu_pending_irq(void)109 bool prcmu_pending_irq(void)
110 {
111 u32 it, im;
112 int i;
113
114 for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
115 it = readl(PRCM_ARMITVAL31TO0 + i * 4);
116 im = readl(PRCM_ARMITMSK31TO0 + i * 4);
117 if (it & im)
118 return true; /* There is a pending interrupt */
119 }
120
121 return false;
122 }
123
124 /*
125 * This function checks if the specified cpu is in WFI. It's usage
126 * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
127 * function. Of course passing smp_processor_id() to this function will
128 * always return false...
129 */
prcmu_is_cpu_in_wfi(int cpu)130 bool prcmu_is_cpu_in_wfi(int cpu)
131 {
132 return readl(PRCM_ARM_WFI_STANDBY) &
133 (cpu ? PRCM_ARM_WFI_STANDBY_WFI1 : PRCM_ARM_WFI_STANDBY_WFI0);
134 }
135
136 /*
137 * This function copies the gic SPI settings to the prcmu in order to
138 * monitor them and abort/finish the retention/off sequence or state.
139 */
prcmu_copy_gic_settings(void)140 int prcmu_copy_gic_settings(void)
141 {
142 u32 er; /* Enable register */
143 int i;
144
145 /* We skip the STI and PPI */
146 for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
147 er = readl_relaxed(dist_base +
148 GIC_DIST_ENABLE_SET + (i + 1) * 4);
149 writel(er, PRCM_ARMITMSK31TO0 + i * 4);
150 }
151
152 return 0;
153 }
154
155 #ifdef CONFIG_SUSPEND
ux500_suspend_enter(suspend_state_t state)156 static int ux500_suspend_enter(suspend_state_t state)
157 {
158 cpu_do_idle();
159 return 0;
160 }
161
ux500_suspend_valid(suspend_state_t state)162 static int ux500_suspend_valid(suspend_state_t state)
163 {
164 return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
165 }
166
167 static const struct platform_suspend_ops ux500_suspend_ops = {
168 .enter = ux500_suspend_enter,
169 .valid = ux500_suspend_valid,
170 };
171 #define UX500_SUSPEND_OPS (&ux500_suspend_ops)
172 #else
173 #define UX500_SUSPEND_OPS NULL
174 #endif
175
ux500_pm_init(u32 phy_base,u32 size)176 void __init ux500_pm_init(u32 phy_base, u32 size)
177 {
178 struct device_node *np;
179
180 prcmu_base = ioremap(phy_base, size);
181 if (!prcmu_base) {
182 pr_err("could not remap PRCMU for PM functions\n");
183 return;
184 }
185 np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
186 dist_base = of_iomap(np, 0);
187 of_node_put(np);
188 if (!dist_base) {
189 pr_err("could not remap GIC dist base for PM functions\n");
190 return;
191 }
192
193 /*
194 * On watchdog reboot the GIC is in some cases decoupled.
195 * This will make sure that the GIC is correctly configured.
196 */
197 prcmu_gic_recouple();
198
199 /* Set up ux500 suspend callbacks. */
200 suspend_set_ops(UX500_SUSPEND_OPS);
201 }
202