| /linux-6.3-rc2/drivers/iio/adc/ |
| A D | exynos_adc.c | 231 u32 con1; in exynos_adc_v1_init_hw() local
240 con1 |= ADC_V1_CON_RES; in exynos_adc_v1_init_hw()
267 u32 con1; in exynos_adc_v1_start_conv() local
313 u32 con1; in exynos_adc_s3c2416_start_conv() local
339 u32 con1; in exynos_adc_s3c2443_start_conv() local
360 u32 con1; in exynos_adc_s3c64xx_start_conv() local
389 u32 con1, con2; in exynos_adc_v2_init_hw() local
394 con1 = ADC_V2_CON1_SOFT_RESET; in exynos_adc_v2_init_hw()
425 u32 con1, con2; in exynos_adc_v2_start_conv() local
463 u32 con1, con2; in exynos_adc_exynos7_init_hw() local
[all …]
|
| /linux-6.3-rc2/drivers/pwm/ |
| A D | pwm-mtk-disp.c | 35 unsigned int con1; member
144 mtk_disp_pwm_update_bits(mdp, mdp->data->con1, in mtk_disp_pwm_apply()
181 u32 clk_div, pwm_en, con0, con1; in mtk_disp_pwm_get_state() local
199 con1 = readl(mdp->base + mdp->data->con1); in mtk_disp_pwm_get_state()
203 period = FIELD_GET(PWM_PERIOD_MASK, con1); in mtk_disp_pwm_get_state()
209 high_width = FIELD_GET(PWM_HIGH_WIDTH_MASK, con1); in mtk_disp_pwm_get_state()
276 .con1 = 0xac,
286 .con1 = 0x14,
296 .con1 = 0x1c,
|
| /linux-6.3-rc2/drivers/clk/samsung/ |
| A D | clk-pll.c | 655 u32 con0, con1; in samsung_pll45xx_set_rate() local
666 con1 = readl_relaxed(pll->con_reg + 0x4); in samsung_pll45xx_set_rate()
686 con1 = readl_relaxed(pll->con_reg + 0x4); in samsung_pll45xx_set_rate()
688 con1 |= (rate->afc << PLL45XX_AFC_SHIFT); in samsung_pll45xx_set_rate()
703 writel_relaxed(con1, pll->con_reg + 0x4); in samsung_pll45xx_set_rate()
792 u32 con0, con1, lock; in samsung_pll46xx_set_rate() local
803 con1 = readl_relaxed(pll->con_reg + 0x4); in samsung_pll46xx_set_rate()
838 con1 = readl_relaxed(pll->con_reg + 0x4); in samsung_pll46xx_set_rate()
1125 u32 con0, con1; in samsung_pll2650x_set_rate() local
1136 con1 = readl_relaxed(pll->con_reg + 4); in samsung_pll2650x_set_rate()
[all …]
|
| /linux-6.3-rc2/drivers/media/dvb-frontends/ |
| A D | itd1000.c | 120 u8 con1 = itd1000_read_reg(state, CON1) & 0xfd; in itd1000_set_lpf_bw() local
128 itd1000_write_reg(state, CON1, con1 | (1 << 1)); in itd1000_set_lpf_bw()
139 itd1000_write_reg(state, CON1, con1 | (0 << 1)); in itd1000_set_lpf_bw()
|
| /linux-6.3-rc2/sound/soc/mediatek/mt8188/ |
| A D | mt8188-dai-etdm.c | 74 unsigned int con1; member
155 etdm_reg->con1 = ETDM_IN1_CON1; in get_etdm_reg()
163 etdm_reg->con1 = ETDM_IN2_CON1; in get_etdm_reg()
171 etdm_reg->con1 = ETDM_OUT1_CON1; in get_etdm_reg()
179 etdm_reg->con1 = ETDM_OUT2_CON1; in get_etdm_reg()
188 etdm_reg->con1 = ETDM_OUT3_CON1; in get_etdm_reg()
1600 regmap_update_bits(afe->regmap, etdm_reg.con1, mask, val); in mtk_dai_etdm_in_configure()
1719 regmap_update_bits(afe->regmap, etdm_reg.con1, mask, val); in mtk_dai_etdm_out_configure()
1785 regmap_set_bits(afe->regmap, etdm_reg.con1, in mtk_dai_etdm_mclk_configure()
1788 regmap_clear_bits(afe->regmap, etdm_reg.con1, in mtk_dai_etdm_mclk_configure()
|
| /linux-6.3-rc2/sound/soc/mediatek/mt8195/ |
| A D | mt8195-dai-etdm.c | 91 unsigned int con1; member
170 etdm_reg->con1 = ETDM_IN1_CON1; in get_etdm_reg()
178 etdm_reg->con1 = ETDM_IN2_CON1; in get_etdm_reg()
186 etdm_reg->con1 = ETDM_OUT1_CON1; in get_etdm_reg()
194 etdm_reg->con1 = ETDM_OUT2_CON1; in get_etdm_reg()
203 etdm_reg->con1 = ETDM_OUT3_CON1; in get_etdm_reg()
1666 regmap_update_bits(afe->regmap, etdm_reg.con1, mask, val); in mtk_dai_etdm_in_configure()
1784 regmap_update_bits(afe->regmap, etdm_reg.con1, mask, val); in mtk_dai_etdm_out_configure()
1860 regmap_update_bits(afe->regmap, etdm_reg.con1, mask, val); in mtk_dai_etdm_mclk_configure()
|
| /linux-6.3-rc2/drivers/net/ethernet/stmicro/stmmac/ |
| A D | dwmac-rk.c | 1030 u32 con0, con1; in rk3568_set_to_rgmii() local
1039 con1 = (bsp_priv->id == 1) ? RK3568_GRF_GMAC1_CON1 : in rk3568_set_to_rgmii()
1046 regmap_write(bsp_priv->grf, con1, in rk3568_set_to_rgmii()
1055 u32 con1; in rk3568_set_to_rmii() local
1062 con1 = (bsp_priv->id == 1) ? RK3568_GRF_GMAC1_CON1 : in rk3568_set_to_rmii()
1064 regmap_write(bsp_priv->grf, con1, RK3568_GMAC_PHY_INTF_SEL_RMII); in rk3568_set_to_rmii()
|
| /linux-6.3-rc2/Documentation/virt/uml/ |
| A D | user_mode_linux_howto_v2.rst | 650 con1=fd:0,fd:1
665 ``con1=fd:0,fd:1.``
668 ``con1=port:4321``. The host must have /usr/sbin/in.telnetd (usually part of
675 * The tty channel - bind to an existing system tty. Example: ``con1=/dev/tty8``
695 root=/dev/ubda con=null con0=null,fd:2 con1=fd:0,fd:1
699 All consoles except ``con1`` will be disabled and console 1 will
|
| /linux-6.3-rc2/tools/testing/selftests/wireguard/qemu/ |
| A D | Makefile | 307 con1=fd:51 51>$(BUILD_PATH)/result </dev/null 2>&1 | cat
|