/linux-6.3-rc2/arch/arm/mach-pxa/ |
A D | am300epd.c | 134 gpio_direction_output(PWR_GPIO_PIN, 0); in am300_init_gpio_regs() 135 gpio_direction_output(CFG_GPIO_PIN, 1); in am300_init_gpio_regs() 136 gpio_direction_output(DC_GPIO_PIN, 0); in am300_init_gpio_regs() 137 gpio_direction_output(RD_GPIO_PIN, 1); in am300_init_gpio_regs() 138 gpio_direction_output(WR_GPIO_PIN, 1); in am300_init_gpio_regs() 139 gpio_direction_output(CS_GPIO_PIN, 1); in am300_init_gpio_regs() 140 gpio_direction_output(RST_GPIO_PIN, 0); in am300_init_gpio_regs() 148 gpio_direction_output(i, 0); in am300_init_gpio_regs()
|
A D | reset.c | 29 rc = gpio_direction_output(gpio, level); in init_gpio_reset() 55 gpio_direction_output(reset_gpio, 0); in do_gpio_reset()
|
A D | am200epd.c | 119 gpio_direction_output(LED_GPIO_PIN, 0); in am200_init_gpio_regs() 120 gpio_direction_output(STDBY_GPIO_PIN, 0); in am200_init_gpio_regs() 121 gpio_direction_output(RST_GPIO_PIN, 0); in am200_init_gpio_regs() 126 gpio_direction_output(PCBPWR_GPIO_PIN, 0); in am200_init_gpio_regs()
|
/linux-6.3-rc2/arch/arm/mach-sa1100/ |
A D | h3600.c | 55 gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable); in h3600_lcd_power() 56 gpio_direction_output(H3600_EGPIO_LCD_PCI, enable); in h3600_lcd_power() 57 gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable); in h3600_lcd_power() 58 gpio_direction_output(H3600_EGPIO_LVDD_ON, enable); in h3600_lcd_power()
|
A D | h3xxx.c | 58 err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0); in h3xxx_flash_init() 90 gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state); in h3xxx_uart_pm()
|
/linux-6.3-rc2/drivers/pcmcia/ |
A D | sa1100_h3600.c | 39 err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0); in h3600_pcmcia_hw_init() 45 err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0); in h3600_pcmcia_hw_init() 51 err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0); in h3600_pcmcia_hw_init() 57 err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0); in h3600_pcmcia_hw_init()
|
A D | xxs1500_ss.c | 164 gpio_direction_output(GPIO_RESET, 1); /* assert reset */ in xxs1500_pcmcia_sock_init() 165 gpio_direction_output(GPIO_OUTEN, 1); /* disable buffers */ in xxs1500_pcmcia_sock_init() 166 gpio_direction_output(GPIO_POWER, 1); /* power off */ in xxs1500_pcmcia_sock_init()
|
/linux-6.3-rc2/arch/arm/mach-orion5x/ |
A D | net2big-setup.c | 149 err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0); in net2big_sata_power_init() 254 err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1); in net2big_gpio_leds_init() 268 err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1); in net2big_gpio_leds_init() 278 err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1); in net2big_gpio_leds_init() 412 gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0) in net2big_init()
|
A D | dns323-setup.c | 626 gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); in dns323_init() 668 gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) in dns323_init() 681 gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1); in dns323_init() 685 gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) in dns323_init() 695 gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0) in dns323_init()
|
A D | board-d2net.c | 87 err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); in d2net_gpio_leds_init()
|
/linux-6.3-rc2/arch/sh/boards/mach-ap325rxa/ |
A D | setup.c | 413 gpio_direction_output(GPIO_PTX5, 1); in ap325rxa_devices_setup() 417 gpio_direction_output(GPIO_PTX4, 0); in ap325rxa_devices_setup() 453 gpio_direction_output(GPIO_PTS3, 1); in ap325rxa_devices_setup() 471 gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */ in ap325rxa_devices_setup() 473 gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */ in ap325rxa_devices_setup() 475 gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */ in ap325rxa_devices_setup() 477 gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */ in ap325rxa_devices_setup()
|
/linux-6.3-rc2/arch/sh/boards/mach-ecovec24/ |
A D | setup.c | 1129 gpio_direction_output(GPIO_PTG0, 0); in arch_setup() 1130 gpio_direction_output(GPIO_PTG1, 0); in arch_setup() 1131 gpio_direction_output(GPIO_PTG2, 0); in arch_setup() 1132 gpio_direction_output(GPIO_PTG3, 0); in arch_setup() 1137 gpio_direction_output(GPIO_PTA1, 1); in arch_setup() 1159 gpio_direction_output(GPIO_PTB4, 0); in arch_setup() 1160 gpio_direction_output(GPIO_PTB5, 0); in arch_setup() 1209 gpio_direction_output(GPIO_PTU1, 0); in arch_setup() 1210 gpio_direction_output(GPIO_PTA2, 0); in arch_setup() 1387 gpio_direction_output(GPIO_PTU0, 0); in arch_setup() [all …]
|
/linux-6.3-rc2/arch/sh/boards/ |
A D | board-sh7757lcr.c | 541 gpio_direction_output(GPIO_PTU3, 1); in sh7757lcr_devices_setup() 543 gpio_direction_output(GPIO_PTU2, 1); in sh7757lcr_devices_setup() 545 gpio_direction_output(GPIO_PTU1, 1); in sh7757lcr_devices_setup() 547 gpio_direction_output(GPIO_PTU0, 1); in sh7757lcr_devices_setup() 551 gpio_direction_output(GPIO_PTT4, 1); in sh7757lcr_devices_setup() 555 gpio_direction_output(GPIO_PTT7, 0); in sh7757lcr_devices_setup() 557 gpio_direction_output(GPIO_PTT6, 0); in sh7757lcr_devices_setup() 559 gpio_direction_output(GPIO_PTT5, 1); in sh7757lcr_devices_setup()
|
/linux-6.3-rc2/arch/arm/mach-omap1/ |
A D | board-osk.c | 204 gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1); in osk_tps_setup() 213 gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0); in osk_tps_setup() 217 gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1); in osk_tps_setup()
|
A D | board-sx1.c | 329 gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ in omap_sx1_init() 330 gpio_direction_output(11, 0); /*A_SWITCH = 0 */ in omap_sx1_init() 331 gpio_direction_output(15, 0); /*A_USB_ON = 0 */ in omap_sx1_init()
|
/linux-6.3-rc2/arch/sh/boards/mach-kfr2r09/ |
A D | setup.c | 465 gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ in kfr2r09_usb0_gadget_setup() 498 gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ in kfr2r09_devices_setup() 546 gpio_direction_output(GPIO_PTE4, 1); in kfr2r09_devices_setup() 548 gpio_direction_output(GPIO_PTF4, 1); in kfr2r09_devices_setup() 550 gpio_direction_output(GPIO_PTU0, 1); in kfr2r09_devices_setup()
|
/linux-6.3-rc2/arch/arm/mach-s3c/ |
A D | mach-crag6410.c | 135 gpio_direction_output(S3C64XX_GPF(14), 0); in crag6410_lcd_power_set() 844 gpio_direction_output(S3C64XX_GPB(0), 0); in crag6410_machine_init() 847 gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */ in crag6410_machine_init() 850 gpio_direction_output(S3C64XX_GPB(1), 0); in crag6410_machine_init() 853 gpio_direction_output(S3C64XX_GPF(10), 1); in crag6410_machine_init()
|
/linux-6.3-rc2/drivers/rtc/ |
A D | rtc-ds2404.c | 63 gpio_direction_output(ds2404_gpio[i].gpio, 1); in ds2404_gpio_map() 89 gpio_direction_output(ds2404_gpio[DS2404_DQ].gpio, 0); in ds2404_reset() 97 gpio_direction_output(ds2404_gpio[DS2404_DQ].gpio, 1); in ds2404_write_byte()
|
/linux-6.3-rc2/arch/m68k/coldfire/ |
A D | device.c | 214 status = gpio_direction_output(MCFQSPI_CS0, 1); in mcf_cs_setup() 225 status = gpio_direction_output(MCFQSPI_CS1, 1); in mcf_cs_setup() 236 status = gpio_direction_output(MCFQSPI_CS2, 1); in mcf_cs_setup() 248 status = gpio_direction_output(MCFQSPI_CS3, 1); in mcf_cs_setup()
|
/linux-6.3-rc2/sound/soc/ti/ |
A D | omap3pandora.c | 238 ret = gpio_direction_output(OMAP3_PANDORA_DAC_POWER_GPIO, 0); in omap3pandora_soc_init() 250 ret = gpio_direction_output(OMAP3_PANDORA_AMP_POWER_GPIO, 0); in omap3pandora_soc_init()
|
A D | n810.c | 336 gpio_direction_output(N810_HEADSET_AMP_GPIO, 0); in n810_soc_init() 337 gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0); in n810_soc_init()
|
/linux-6.3-rc2/drivers/regulator/ |
A D | s5m8767.c | 824 gpio_direction_output(pdata->buck_gpios[0], in s5m8767_pmic_probe() 827 gpio_direction_output(pdata->buck_gpios[1], in s5m8767_pmic_probe() 830 gpio_direction_output(pdata->buck_gpios[2], in s5m8767_pmic_probe() 847 gpio_direction_output(pdata->buck_ds[0], 0x0); in s5m8767_pmic_probe() 849 gpio_direction_output(pdata->buck_ds[1], 0x0); in s5m8767_pmic_probe() 851 gpio_direction_output(pdata->buck_ds[2], 0x0); in s5m8767_pmic_probe()
|
/linux-6.3-rc2/Documentation/translations/zh_CN/driver-api/gpio/ |
A D | legacy.rst | 130 int gpio_direction_output(unsigned gpio, int value); 214 gpio_direction_output() 389 LOW: gpio_direction_output(gpio, 0) ... 这代码驱动信号并覆盖
|
/linux-6.3-rc2/sound/soc/samsung/ |
A D | speyside.c | 126 gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity); in speyside_set_polarity() 157 gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity); in speyside_wm8996_init()
|
/linux-6.3-rc2/Documentation/translations/zh_TW/ |
A D | gpio.txt | 139 int gpio_direction_output(unsigned gpio, int value); 221 gpio_direction_output() 393 LOW: gpio_direction_output(gpio, 0) ... 這代碼驅動信號並覆蓋
|