/linux-6.3-rc2/arch/sh/boards/ |
A D | board-sh7757lcr.c | 360 gpio_request(GPIO_FN_IRQ8, NULL); in sh7757lcr_devices_setup() 361 gpio_request(GPIO_FN_IRQ7, NULL); in sh7757lcr_devices_setup() 362 gpio_request(GPIO_FN_IRQ6, NULL); in sh7757lcr_devices_setup() 363 gpio_request(GPIO_FN_IRQ5, NULL); in sh7757lcr_devices_setup() 364 gpio_request(GPIO_FN_IRQ4, NULL); in sh7757lcr_devices_setup() 414 gpio_request(GPIO_FN_WP, NULL); in sh7757lcr_devices_setup() 540 gpio_request(GPIO_PTU3, NULL); in sh7757lcr_devices_setup() 542 gpio_request(GPIO_PTU2, NULL); in sh7757lcr_devices_setup() 544 gpio_request(GPIO_PTU1, NULL); in sh7757lcr_devices_setup() 546 gpio_request(GPIO_PTU0, NULL); in sh7757lcr_devices_setup() [all …]
|
A D | board-magicpanelr2.c | 179 gpio_request(GPIO_FN_A25, NULL); in setup_port_multiplexing() 180 gpio_request(GPIO_FN_A24, NULL); in setup_port_multiplexing() 181 gpio_request(GPIO_FN_A23, NULL); in setup_port_multiplexing() 182 gpio_request(GPIO_FN_A22, NULL); in setup_port_multiplexing() 183 gpio_request(GPIO_FN_A21, NULL); in setup_port_multiplexing() 184 gpio_request(GPIO_FN_A20, NULL); in setup_port_multiplexing() 185 gpio_request(GPIO_FN_A19, NULL); in setup_port_multiplexing() 186 gpio_request(GPIO_FN_A0, NULL); in setup_port_multiplexing()
|
A D | board-urquell.c | 151 gpio_request(GPIO_FN_USB_OVC0, NULL); in urquell_devices_setup() 152 gpio_request(GPIO_FN_USB_PENC0, NULL); in urquell_devices_setup()
|
/linux-6.3-rc2/arch/sh/boards/mach-se/7724/ |
A D | setup.c | 721 gpio_request(GPIO_FN_STATUS2, NULL); in devices_setup() 901 gpio_request(GPIO_PTX5, NULL); in devices_setup() 926 gpio_request(GPIO_FN_DV_D15, NULL); in devices_setup() 927 gpio_request(GPIO_FN_DV_D14, NULL); in devices_setup() 928 gpio_request(GPIO_FN_DV_D13, NULL); in devices_setup() 929 gpio_request(GPIO_FN_DV_D12, NULL); in devices_setup() 930 gpio_request(GPIO_FN_DV_D11, NULL); in devices_setup() 931 gpio_request(GPIO_FN_DV_D10, NULL); in devices_setup() 932 gpio_request(GPIO_FN_DV_D9, NULL); in devices_setup() 933 gpio_request(GPIO_FN_DV_D8, NULL); in devices_setup() [all …]
|
/linux-6.3-rc2/arch/sh/boards/mach-migor/ |
A D | setup.c | 466 gpio_request(GPIO_FN_IRQ0, NULL); in migor_devices_setup() 485 gpio_request(GPIO_PTA1, NULL); in migor_devices_setup() 499 gpio_request(GPIO_FN_IRQ6, NULL); in migor_devices_setup() 511 gpio_request(GPIO_FN_LCDD8, NULL); in migor_devices_setup() 512 gpio_request(GPIO_FN_LCDD7, NULL); in migor_devices_setup() 513 gpio_request(GPIO_FN_LCDD6, NULL); in migor_devices_setup() 514 gpio_request(GPIO_FN_LCDD5, NULL); in migor_devices_setup() 515 gpio_request(GPIO_FN_LCDD4, NULL); in migor_devices_setup() 516 gpio_request(GPIO_FN_LCDD3, NULL); in migor_devices_setup() 517 gpio_request(GPIO_FN_LCDD2, NULL); in migor_devices_setup() [all …]
|
/linux-6.3-rc2/arch/sh/boards/mach-ap325rxa/ |
A D | setup.c | 452 gpio_request(GPIO_PTS3, NULL); in ap325rxa_devices_setup() 470 gpio_request(GPIO_PTZ7, NULL); in ap325rxa_devices_setup() 472 gpio_request(GPIO_PTZ6, NULL); in ap325rxa_devices_setup() 474 gpio_request(GPIO_PTZ5, NULL); in ap325rxa_devices_setup() 476 gpio_request(GPIO_PTZ4, NULL); in ap325rxa_devices_setup() 482 gpio_request(GPIO_FN_FCE, NULL); in ap325rxa_devices_setup() 483 gpio_request(GPIO_FN_NAF7, NULL); in ap325rxa_devices_setup() 492 gpio_request(GPIO_FN_FOE, NULL); in ap325rxa_devices_setup() 493 gpio_request(GPIO_FN_FSC, NULL); in ap325rxa_devices_setup() 494 gpio_request(GPIO_FN_FWE, NULL); in ap325rxa_devices_setup() [all …]
|
/linux-6.3-rc2/arch/sh/boards/mach-ecovec24/ |
A D | setup.c | 596 gpio_request(GPIO_PTZ0, NULL); in ts_get_pendown_state() 1125 gpio_request(GPIO_PTG0, NULL); in arch_setup() 1126 gpio_request(GPIO_PTG1, NULL); in arch_setup() 1127 gpio_request(GPIO_PTG2, NULL); in arch_setup() 1128 gpio_request(GPIO_PTG3, NULL); in arch_setup() 1136 gpio_request(GPIO_PTA1, NULL); in arch_setup() 1205 gpio_request(GPIO_PTE6, NULL); in arch_setup() 1206 gpio_request(GPIO_PTU1, NULL); in arch_setup() 1207 gpio_request(GPIO_PTA2, NULL); in arch_setup() 1294 gpio_request(GPIO_PTR0, NULL); in arch_setup() [all …]
|
/linux-6.3-rc2/arch/sh/boards/mach-kfr2r09/ |
A D | setup.c | 514 gpio_request(GPIO_FN_KEYIN0, NULL); in kfr2r09_devices_setup() 530 gpio_request(GPIO_FN_LCDD9, NULL); in kfr2r09_devices_setup() 531 gpio_request(GPIO_FN_LCDD8, NULL); in kfr2r09_devices_setup() 532 gpio_request(GPIO_FN_LCDD7, NULL); in kfr2r09_devices_setup() 533 gpio_request(GPIO_FN_LCDD6, NULL); in kfr2r09_devices_setup() 534 gpio_request(GPIO_FN_LCDD5, NULL); in kfr2r09_devices_setup() 535 gpio_request(GPIO_FN_LCDD4, NULL); in kfr2r09_devices_setup() 536 gpio_request(GPIO_FN_LCDD3, NULL); in kfr2r09_devices_setup() 537 gpio_request(GPIO_FN_LCDD2, NULL); in kfr2r09_devices_setup() 538 gpio_request(GPIO_FN_LCDD1, NULL); in kfr2r09_devices_setup() [all …]
|
/linux-6.3-rc2/arch/sh/boards/mach-highlander/ |
A D | pinmux-r7785rp.c | 12 gpio_request(GPIO_FN_SCIF0_CTS, NULL); in highlander_plat_pinmux_setup() 13 gpio_request(GPIO_FN_SCIF0_RTS, NULL); in highlander_plat_pinmux_setup() 14 gpio_request(GPIO_FN_SCIF0_SCK, NULL); in highlander_plat_pinmux_setup() 15 gpio_request(GPIO_FN_SCIF0_RXD, NULL); in highlander_plat_pinmux_setup() 16 gpio_request(GPIO_FN_SCIF0_TXD, NULL); in highlander_plat_pinmux_setup()
|
/linux-6.3-rc2/arch/arm/mach-orion5x/ |
A D | net2big-setup.c | 125 err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status"); in net2big_sata_power_init() 136 err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status"); in net2big_sata_power_init() 147 err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request"); in net2big_sata_power_init() 251 err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP, in net2big_gpio_leds_init() 265 err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED, in net2big_gpio_leds_init() 275 err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED, in net2big_gpio_leds_init() 411 if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 && in net2big_init()
|
A D | dns323-setup.c | 625 gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); in dns323_init() 667 if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || in dns323_init() 680 if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0) in dns323_init() 684 if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || in dns323_init() 694 if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 || in dns323_init()
|
A D | board-rd88f5182.c | 45 if (gpio_request(pin, "PCI IntA") == 0) { in rd88f5182_pci_preinit() 58 if (gpio_request(pin, "PCI IntB") == 0) { in rd88f5182_pci_preinit()
|
A D | ts209-setup.c | 113 if (gpio_request(pin, "PCI Int1") == 0) { in qnap_ts209_pci_preinit() 127 if (gpio_request(pin, "PCI Int2") == 0) { in qnap_ts209_pci_preinit() 306 if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) { in qnap_ts209_init()
|
A D | mv2120-setup.c | 215 if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) { in mv2120_init() 225 if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 || in mv2120_init()
|
/linux-6.3-rc2/arch/arm/mach-omap1/ |
A D | board-osk.c | 203 gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en"); in osk_tps_setup() 212 gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset"); in osk_tps_setup() 216 gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power"); in osk_tps_setup() 266 if ((gpio_request(0, "smc_irq")) < 0) { in osk_init_smc91x() 282 if ((gpio_request(62, "cf_irq")) < 0) { in osk_init_cf() 377 if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) in osk_init()
|
A D | board-sx1.c | 326 gpio_request(1, "A_IRDA_OFF"); in omap_sx1_init() 327 gpio_request(11, "A_SWITCH"); in omap_sx1_init() 328 gpio_request(15, "A_USB_ON"); in omap_sx1_init()
|
A D | board-palmte.c | 193 if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) { in palmte_misc_gpio_setup() 200 if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) { in palmte_misc_gpio_setup()
|
/linux-6.3-rc2/drivers/pcmcia/ |
A D | sa1100_h3600.c | 36 err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON"); in h3600_pcmcia_hw_init() 42 err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON"); in h3600_pcmcia_hw_init() 48 err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET"); in h3600_pcmcia_hw_init() 54 err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET"); in h3600_pcmcia_hw_init()
|
/linux-6.3-rc2/Documentation/translations/zh_CN/driver-api/gpio/ |
A D | legacy.rst | 122 对于一个 GPIO,系统应该做的第一件事情就是通过 gpio_request() 190 一个之前通过 gpio_request 分配到的有效 GPIO 编号):: 215 gpio_request() 234 int gpio_request(unsigned gpio, const char *label); 239 将无效的 GPIO 编码传递给 gpio_request()会导致失败,申请一个已使用这个 240 函数声明过的 GPIO 也会失败。gpio_request()的返回值必须检查。你应该在 267 gpio_request()前将这类细节配置好,例如使用引脚控制子系统的映射表, 278 * 其他和 gpio_request()的参数和返回值相同 660 内核代码可以明确地管理那些已通过 gpio_request()申请的 GPIO 的导出::
|
/linux-6.3-rc2/Documentation/translations/zh_TW/ |
A D | gpio.txt | 131 對於一個 GPIO,系統應該做的第一件事情就是通過 gpio_request() 197 一個之前通過 gpio_request 分配到的有效 GPIO 編號): 222 gpio_request() 240 int gpio_request(unsigned gpio, const char *label); 245 將無效的 GPIO 編碼傳遞給 gpio_request()會導致失敗,申請一個已使用這個 246 函數聲明過的 GPIO 也會失敗。gpio_request()的返回值必須檢查。你應該在 273 gpio_request()前將這類細節配置好,例如使用 pinctrl 子系統的映射表, 284 * 其他和 gpio_request()的參數和返回值相同 622 內核代碼可以明確地管理那些已通過 gpio_request()申請的 GPIO 的導出:
|
/linux-6.3-rc2/arch/sh/boards/mach-rsk/ |
A D | devices-rsk7203.c | 127 gpio_request(GPIO_FN_TXD0, NULL); in rsk7203_devices_setup() 128 gpio_request(GPIO_FN_RXD0, NULL); in rsk7203_devices_setup() 132 gpio_request(GPIO_FN_IRQ0_PB, NULL); in rsk7203_devices_setup()
|
/linux-6.3-rc2/arch/sh/kernel/cpu/sh4a/ |
A D | setup-shx3.c | 346 ret |= gpio_request(GPIO_FN_IRQ3, intc_desc_irq.name); in plat_irq_setup_pins() 347 ret |= gpio_request(GPIO_FN_IRQ2, intc_desc_irq.name); in plat_irq_setup_pins() 348 ret |= gpio_request(GPIO_FN_IRQ1, intc_desc_irq.name); in plat_irq_setup_pins() 349 ret |= gpio_request(GPIO_FN_IRQ0, intc_desc_irq.name); in plat_irq_setup_pins() 359 ret |= gpio_request(GPIO_FN_IRL3, intc_desc_irl.name); in plat_irq_setup_pins() 360 ret |= gpio_request(GPIO_FN_IRL2, intc_desc_irl.name); in plat_irq_setup_pins() 361 ret |= gpio_request(GPIO_FN_IRL1, intc_desc_irl.name); in plat_irq_setup_pins() 362 ret |= gpio_request(GPIO_FN_IRL0, intc_desc_irl.name); in plat_irq_setup_pins()
|
/linux-6.3-rc2/arch/arm/mach-ep93xx/ |
A D | core.c | 491 err = gpio_request(EP93XX_GPIO_LINE_EGPIO14, in ep93xx_pwm_acquire_gpio() 610 err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev)); in ep93xx_keypad_acquire_gpio() 613 err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev)); in ep93xx_keypad_acquire_gpio() 779 err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); in ep93xx_ide_acquire_gpio() 782 err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); in ep93xx_ide_acquire_gpio() 786 err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); in ep93xx_ide_acquire_gpio() 791 err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); in ep93xx_ide_acquire_gpio() 796 err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); in ep93xx_ide_acquire_gpio()
|
/linux-6.3-rc2/drivers/gpio/ |
A D | gpiolib-legacy.c | 68 int gpio_request(unsigned gpio, const char *label) in gpio_request() function 78 EXPORT_SYMBOL_GPL(gpio_request);
|
/linux-6.3-rc2/arch/m68k/coldfire/ |
A D | device.c | 209 status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); in mcf_cs_setup() 220 status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); in mcf_cs_setup() 231 status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); in mcf_cs_setup() 243 status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3"); in mcf_cs_setup()
|