/linux-6.3-rc2/Documentation/hwmon/ |
A D | pcf8591.rst | 29 The PCF8591 has 4 analog inputs programmable as single-ended or 30 differential inputs: 32 - mode 0 : four single ended inputs 33 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3 35 - mode 1 : three differential inputs 40 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1 44 - mode 3 : two differential inputs 59 - 0 = four single ended inputs 60 - 1 = three differential inputs 62 - 3 = two differential inputs [all …]
|
A D | adm1026.rst | 23 List of GPIO pins (0-16) to program as inputs 50 sensor inputs and one internal sensor. Each sensor has a high and low 68 measurements. Several inputs have integrated attenuators so they can measure 70 dedicated inputs. There are several inputs scaled to 0-3V full-scale range 71 for SCSI terminator power. The remaining inputs are not scaled and have 82 The ADM1026 measures continuously. Analog inputs are measured about 4 87 temperature sensor inputs. Both the PWM output and the DAC output can be
|
A D | adt7475.rst | 51 measurement inputs and VID support. The ADT7490 also has additional 52 features, including extra voltage measurement inputs and PECI support. All 69 Each of the measured inputs (voltage, temperature, fan speed) has 73 The ADT747x samples all inputs continuously. The driver will not read 81 * 2 voltage inputs 85 * 2 voltage inputs 88 * 5 voltage inputs 92 * 6 voltage inputs
|
A D | max31790.rst | 28 Tachometer inputs monitor fan tachometer logic outputs for precise (+/-1%) 30 Six pins are dedicated tachometer inputs. Any of the six PWM outputs can 31 also be configured to serve as tachometer inputs.
|
A D | dme1737.rst | 46 Enables the monitoring of voltage, fan and temp inputs 87 The voltage inputs are sampled with 12-bit resolution and have internal 89 millivolts and don't need scaling. The voltage inputs are mapped as follows 141 Celsius. The chip also features offsets for all 3 temperature inputs which - 144 need any user-space adjustments. The temperature inputs are mapped as follows 160 Fan RPMs are measured with 16-bit resolution. The chip provides inputs for 6 161 fan tachometers. All 6 inputs have an associated min limit which triggers an 165 that generate 2 pulses per revolution. Fan inputs 5-6 also provide a max 174 inputs 1-3 and PWM outputs 5-6 are associated with fan inputs 5-6. PWM outputs 185 temperature input. Associating PWM outputs to temperature inputs is done via [all …]
|
/linux-6.3-rc2/drivers/media/pci/saa7134/ |
A D | saa7134-cards.c | 451 .inputs = {{ 595 .inputs = {{ 1950 .inputs = {{ 2018 .inputs = {{ 2130 .inputs = {{ 2344 .inputs = {{ 2367 .inputs = {{ 2389 .inputs = {{ 2673 .inputs = {{ 2700 .inputs = {{ [all …]
|
/linux-6.3-rc2/Documentation/userspace-api/ioctl/ |
A D | cdrom.rst | 108 inputs: 129 inputs: 153 inputs: 184 inputs: 213 inputs: 238 inputs: 268 inputs: 293 inputs: 319 inputs: 346 inputs: [all …]
|
/linux-6.3-rc2/Documentation/userspace-api/media/v4l/ |
A D | audio.rst | 9 Audio inputs and outputs are physical connectors of a device. Video 10 capture devices have inputs, output devices have outputs, zero or more 11 each. Radio devices have no audio inputs or outputs. They have exactly 13 tuners with video inputs or outputs only, and radio devices have none of 17 Audio and video inputs and outputs are associated. Selecting a video 20 more than one video input or output. Assumed two composite video inputs 21 and two audio inputs exist, there may be up to four valid combinations. 28 To learn about the number and attributes of the available inputs and 53 multiple selectable audio inputs, all audio output ioctls when the 55 audio inputs or outputs the driver must set the ``V4L2_CAP_AUDIO`` flag
|
A D | video.rst | 9 Video inputs and outputs are physical connectors of a device. These can 12 be a video input. Video and VBI capture devices have inputs. Video and 14 no video inputs or outputs. 16 To learn about the number and attributes of the available inputs and 29 implement all the input ioctls when the device has one or more inputs,
|
A D | vidioc-g-input.rst | 42 only when there are no video inputs, returning ``EINVAL``. 46 to this integer. Side effects are possible. For example inputs may 52 Information about video inputs is available using the
|
/linux-6.3-rc2/drivers/staging/media/atomisp/pci/ |
A D | atomisp_ioctl.c | 581 if (!isp->inputs[index].camera) in atomisp_enum_input() 595 motor = isp->inputs[index].motor; in atomisp_enum_input() 685 if (isp->inputs[input].asd && isp->inputs[input].asd != asd) { in atomisp_s_input() 688 isp->inputs[input].asd->index); in atomisp_s_input() 692 camera = isp->inputs[input].camera; in atomisp_s_input() 731 motor = isp->inputs[input].motor; in atomisp_s_input() 743 isp->inputs[input].asd = asd; in atomisp_s_input() 1186 isp->inputs[master].camera->name, in atomisp_stream_on_master_slave_sensor() 1187 isp->inputs[slave].camera->name); in atomisp_stream_on_master_slave_sensor() 1201 isp->inputs[master].camera->name); in atomisp_stream_on_master_slave_sensor() [all …]
|
/linux-6.3-rc2/sound/pci/hda/ |
A D | hda_auto_parser.c | 60 cfg->inputs[cfg->num_inputs].pin = nid; in add_auto_cfg_input_pin() 61 cfg->inputs[cfg->num_inputs].type = type; in add_auto_cfg_input_pin() 317 cfg->inputs[i].is_headset_mic = 1; in snd_hda_parse_pin_defcfg() 320 cfg->inputs[i].is_headphone_mic = 1; in snd_hda_parse_pin_defcfg() 329 cfg->inputs[i].is_headset_mic = 1; in snd_hda_parse_pin_defcfg() 332 cfg->inputs[i].is_headphone_mic = 1; in snd_hda_parse_pin_defcfg() 403 sort(cfg->inputs, cfg->num_inputs, sizeof(cfg->inputs[0]), in snd_hda_parse_pin_defcfg() 432 cfg->inputs[i].pin); in snd_hda_parse_pin_defcfg() 573 int type = cfg->inputs[input].type; in hda_get_autocfg_input_label() 583 cfg->inputs[input].pin, in hda_get_autocfg_input_label() [all …]
|
/linux-6.3-rc2/drivers/media/platform/renesas/vsp1/ |
A D | vsp1_drm.c | 385 if (!pipe->inputs[i]) in vsp1_du_pipeline_setup_inputs() 392 inputs[j] = inputs[j-1]; in vsp1_du_pipeline_setup_inputs() 395 inputs[j] = rpf; in vsp1_du_pipeline_setup_inputs() 414 struct vsp1_rwpf *rpf = inputs[i]; in vsp1_du_pipeline_setup_inputs() 417 brx->inputs[i].rpf = NULL; in vsp1_du_pipeline_setup_inputs() 426 brx->inputs[i].rpf = rpf; in vsp1_du_pipeline_setup_inputs() 675 struct vsp1_rwpf *rpf = pipe->inputs[i]; in vsp1_du_setup_lif() 687 pipe->inputs[i] = NULL; in vsp1_du_setup_lif() 689 brx->inputs[rpf->brx_input].rpf = NULL; in vsp1_du_setup_lif() 832 drm_pipe->pipe.inputs[rpf_index] = NULL; in vsp1_du_atomic_update() [all …]
|
/linux-6.3-rc2/Documentation/usb/ |
A D | chipidea.rst | 47 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req 55 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req 62 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req 76 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop 77 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req 83 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req 89 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop 97 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
|
/linux-6.3-rc2/arch/x86/kernel/cpu/sgx/ |
A D | encls.h | 67 #define __encls_ret_N(rax, inputs...) \ argument 75 : "a"(rax), inputs \ 110 #define __encls_N(rax, rbx_out, inputs...) \ argument 119 : "a"(rax), inputs \
|
/linux-6.3-rc2/Documentation/devicetree/bindings/sound/ |
A D | cirrus,madera.yaml | 38 INnAR INnBL INnBR. For non-muxed inputs the first two cells 40 and the second two cells must be 0. For muxed inputs the 42 right A inputs and the second two cells set the mode of the 43 left and right B inputs. Valid mode values are one of the 45 of inputs the unspecified inputs default to MADERA_INMODE_DIFF.
|
/linux-6.3-rc2/drivers/media/platform/ti/davinci/ |
A D | vpif_capture.c | 723 input = chan_cfg->inputs[index].input_route; in vpif_set_input() 791 input = chan_cfg->inputs[ch->input_idx].input; in vpif_g_std() 821 input = chan_cfg->inputs[ch->input_idx].input; in vpif_s_std() 1096 input = chan_cfg->inputs[ch->input_idx].input; in vpif_enum_dv_timings() 1130 input = chan_cfg->inputs[ch->input_idx].input; in vpif_query_dv_timings() 1166 input = chan_cfg->inputs[ch->input_idx].input; in vpif_s_dv_timings() 1260 input = chan_cfg->inputs[ch->input_idx].input; in vpif_g_dv_timings() 1537 chan->inputs = devm_kcalloc(&pdev->dev, in vpif_capture_get_pdata() 1539 sizeof(*chan->inputs), in vpif_capture_get_pdata() 1541 if (!chan->inputs) in vpif_capture_get_pdata() [all …]
|
/linux-6.3-rc2/drivers/hwmon/ |
A D | ina3221.c | 124 struct ina3221_input inputs[INA3221_NUM_CHANNELS]; member 153 struct ina3221_input *input = ina->inputs; in ina3221_summation_shunt_resistor() 330 struct ina3221_input *input = ina->inputs; in ina3221_read_curr() 434 struct ina3221_input *input = ina->inputs; in ina3221_write_curr() 591 *str = ina->inputs[index].label; in ina3221_read_string() 620 input = &ina->inputs[channel - 1]; in ina3221_is_visible() 699 struct ina3221_input *input = &ina->inputs[channel]; in ina3221_shunt_show() 711 struct ina3221_input *input = &ina->inputs[channel]; in ina3221_shunt_store() 778 input = &ina->inputs[val]; in ina3221_probe_child_from_dt() 870 if (ina->inputs[i].disconnected) in ina3221_probe() [all …]
|
/linux-6.3-rc2/Documentation/devicetree/bindings/net/ |
A D | ti,k3-am654-cpts.yaml | 20 - hardware timestamp push inputs (HWx_TS_PUSH) 25 - external hardware timestamp push inputs (HWx_TS_PUSH) timestamping 84 ti,cpts-ext-ts-inputs: 88 Number of hardware timestamp push inputs (HWx_TS_PUSH) 142 ti,cpts-ext-ts-inputs = <8>;
|
/linux-6.3-rc2/Documentation/ABI/testing/ |
A D | sysfs-platform-chipidea-usb-otg | 1 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req 18 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop 33 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req 48 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
|
A D | sysfs-bus-iio-adc-max9611 | 13 between RS+ and RS- voltage sense inputs. In Ohms. 17 current flowing between RS+ and RS- inputs.
|
/linux-6.3-rc2/Documentation/devicetree/bindings/gpio/ |
A D | xlnx,gpio-xilinx.yaml | 17 generate an interrupt when a transition on any of their inputs occurs. 50 xlnx,all-inputs: 54 xlnx,all-inputs-2: 140 xlnx,all-inputs = <0x0>; 141 xlnx,all-inputs-2 = <0x0>;
|
A D | gpio-latch.yaml | 43 of number of latches and the number of inputs per latch is derived from 56 description: Array of GPIOs to be used as inputs per latch 59 description: Delay in nanoseconds to wait after the latch inputs have been
|
/linux-6.3-rc2/arch/mips/include/asm/ |
A D | bitops.h | 26 #define __bit_op(mem, insn, inputs...) do { \ argument 39 : inputs \ 43 #define __test_bit_op(mem, ll_dst, insn, inputs...) ({ \ argument 57 : inputs \
|
/linux-6.3-rc2/drivers/pinctrl/starfive/ |
A D | Kconfig | 17 peripherals supporting inputs, outputs, configuring pull-up/pull-down 38 peripherals supporting inputs, outputs, configuring pull-up/pull-down 50 peripherals supporting inputs, outputs, configuring pull-up/pull-down
|