| /linux-6.3-rc2/drivers/net/ethernet/apm/xgene-v2/ |
| A D | mac.c | 21 u32 intf_ctrl, rgmii; in xge_mac_set_speed() local
26 rgmii = xge_rd_csr(pdata, RGMII_REG_0); in xge_mac_set_speed()
37 SET_REG_BIT(&rgmii, CFG_SPEED_125, 0); in xge_mac_set_speed()
44 SET_REG_BIT(&rgmii, CFG_SPEED_125, 0); in xge_mac_set_speed()
51 SET_REG_BIT(&rgmii, CFG_SPEED_125, 1); in xge_mac_set_speed()
60 xge_wr_csr(pdata, RGMII_REG_0, rgmii); in xge_mac_set_speed()
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/net/dsa/ |
| A D | nxp,sja1105.yaml | 86 - rgmii
87 - rgmii-rxid
88 - rgmii-txid
89 - rgmii-id
130 phy-mode = "rgmii-id";
138 phy-mode = "rgmii-id";
146 phy-mode = "rgmii-id";
154 phy-mode = "rgmii-id";
162 phy-mode = "rgmii";
|
| A D | microchip,lan937x.yaml | 48 - rgmii
49 - rgmii-id
50 - rgmii-txid
51 - rgmii-rxid
124 phy-mode = "rgmii";
138 phy-mode = "rgmii";
|
| A D | arrow,xrs700x.yaml | 54 phy-mode = "rgmii-id";
60 phy-mode = "rgmii-id";
65 phy-mode = "rgmii-id";
|
| /linux-6.3-rc2/arch/powerpc/boot/dts/ |
| A D | eiger.dts | 279 compatible = "ibm,rgmii-460sx", "ibm,rgmii";
285 compatible = "ibm,rgmii-460sx", "ibm,rgmii";
320 phy-mode = "rgmii";
322 rgmii-device = <&RGMII0>;
323 rgmii-channel = <0>;
350 phy-mode = "rgmii";
353 rgmii-channel = <1>;
382 phy-mode = "rgmii";
385 rgmii-channel = <0>;
412 phy-mode = "rgmii";
[all …]
|
| A D | klondike.dts | 131 RGMII0: emac-rgmii@400a2000 {
132 compatible = "ibm,rgmii";
164 phy-mode = "rgmii";
168 rgmii-device = <&RGMII0>;
169 rgmii-channel = <0>;
194 phy-mode = "rgmii";
198 rgmii-device = <&RGMII0>;
199 rgmii-channel = <1>;
|
| A D | glacier.dts | 316 compatible = "ibm,rgmii-460gt", "ibm,rgmii";
322 compatible = "ibm,rgmii-460gt", "ibm,rgmii";
357 phy-mode = "rgmii";
359 rgmii-device = <&RGMII0>;
360 rgmii-channel = <0>;
387 phy-mode = "rgmii";
390 rgmii-channel = <1>;
419 phy-mode = "rgmii";
422 rgmii-channel = <0>;
449 phy-mode = "rgmii";
[all …]
|
| A D | obs600.dts | 238 RGMII0: emac-rgmii@ef600b00 {
239 compatible = "ibm,rgmii-405ex", "ibm,rgmii";
266 phy-mode = "rgmii";
268 rgmii-device = <&RGMII0>;
269 rgmii-channel = <0>;
296 phy-mode = "rgmii";
298 rgmii-device = <&RGMII0>;
299 rgmii-channel = <1>;
|
| A D | rainier.dts | 252 RGMII0: emac-rgmii@ef601000 {
253 compatible = "ibm,rgmii-440grx", "ibm,rgmii";
277 phy-mode = "rgmii";
281 rgmii-device = <&RGMII0>;
282 rgmii-channel = <0>;
306 phy-mode = "rgmii";
310 rgmii-device = <&RGMII0>;
311 rgmii-channel = <1>;
|
| A D | sequoia.dts | 310 RGMII0: emac-rgmii@ef601000 {
311 compatible = "ibm,rgmii-440epx", "ibm,rgmii";
335 phy-mode = "rgmii";
339 rgmii-device = <&RGMII0>;
340 rgmii-channel = <0>;
364 phy-mode = "rgmii";
368 rgmii-device = <&RGMII0>;
369 rgmii-channel = <1>;
|
| A D | makalu.dts | 204 RGMII0: emac-rgmii@ef600b00 {
205 compatible = "ibm,rgmii-405ex", "ibm,rgmii";
232 phy-mode = "rgmii";
234 rgmii-device = <&RGMII0>;
235 rgmii-channel = <0>;
262 phy-mode = "rgmii";
264 rgmii-device = <&RGMII0>;
265 rgmii-channel = <1>;
|
| A D | kilauea.dts | 258 RGMII0: emac-rgmii@ef600b00 {
259 compatible = "ibm,rgmii-405ex", "ibm,rgmii";
286 phy-mode = "rgmii";
288 rgmii-device = <&RGMII0>;
289 rgmii-channel = <0>;
316 phy-mode = "rgmii";
318 rgmii-device = <&RGMII0>;
319 rgmii-channel = <1>;
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/net/ |
| A D | qcom,ethqos.txt | 16 - reg-names: Should contain register names "stmmaceth", "rgmii"
21 "ptp_ref", "rgmii"
36 reg-names = "stmmaceth", "rgmii";
37 clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
54 phy-mode = "rgmii";
|
| A D | adi,adin.yaml | 22 internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
29 internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
63 phy-mode = "rgmii-id";
|
| A D | motorcomm,yt8xxx.yaml | 24 internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
33 internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
86 phy-mode = "rgmii-id";
105 phy-mode = "rgmii";
|
| A D | ibm,emac.txt | 45 Supported values are: "mii", "rmii", "smii", "rgmii",
47 For Axon on CAB, it is "rgmii"
55 - rgmii-device : 1 cell, required iff connected to an RGMII. phandle
57 For Axon: phandle of plb5/plb4/opb/rgmii
58 - rgmii-channel : 1 cell, required iff connected to an RGMII. Which
143 phy-mode = "rgmii";
146 rgmii-device = <&RGMII0>;
147 rgmii-channel = <0>;
199 "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
200 EMAC) and the second is "ibm,rgmii".
[all …]
|
| A D | engleder,tsnep.yaml | 56 - rgmii
57 - rgmii-id
86 phy-mode = "rgmii";
106 phy-mode = "rgmii";
|
| A D | ethernet-controller.yaml | 78 - rgmii
82 - rgmii-id
86 - rgmii-rxid
90 - rgmii-txid
234 - rgmii
235 - rgmii-rxid
236 - rgmii-txid
237 - rgmii-id
|
| A D | anarion-gmac.txt | 8 - phy-mode: Should be "rgmii". Other modes are not currently supported.
24 phy-mode = "rgmii";
|
| /linux-6.3-rc2/arch/powerpc/boot/dts/fsl/ |
| A D | mvme7100.dts | 38 phy-connection-type = "rgmii-id";
58 phy-connection-type = "rgmii-id";
67 phy-connection-type = "rgmii-id";
76 phy-connection-type = "rgmii-id";
|
| /linux-6.3-rc2/Documentation/devicetree/bindings/pinctrl/ |
| A D | ralink,rt305x-pinctrl.yaml | 39 pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf,
44 lna, mdio, pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi,
71 enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf,
75 enum: [i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1,
192 const: rgmii
196 enum: [rgmii]
|
| /linux-6.3-rc2/arch/arm/boot/dts/ |
| A D | ls1021a-tsn.dts | 62 phy-mode = "rgmii-id";
70 phy-mode = "rgmii-id";
78 phy-mode = "rgmii-id";
86 phy-mode = "rgmii-id";
93 phy-mode = "rgmii";
123 phy-mode = "rgmii";
|
| /linux-6.3-rc2/arch/arm64/boot/dts/xilinx/ |
| A D | zynqmp-zc1751-xm018-dc4.dts | 117 phy-mode = "rgmii-id";
135 phy-mode = "rgmii-id";
141 phy-mode = "rgmii-id";
147 phy-mode = "rgmii-id";
|
| /linux-6.3-rc2/Documentation/ABI/testing/ |
| A D | sysfs-class-net-phydev | 42 rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
|
| /linux-6.3-rc2/arch/arm64/boot/dts/altera/ |
| A D | socfpga_stratix10_swvp.dts | 64 phy-mode = "rgmii";
71 phy-mode = "rgmii";
77 phy-mode = "rgmii";
|