/linux-6.3-rc2/Documentation/devicetree/bindings/display/ |
A D | mipi-dsi-bus.txt | 1 MIPI DSI (Display Serial Interface) busses 9 standard properties in the context of the DSI bus. 11 Each DSI host provides a DSI bus. The DSI host controller's node contains a 18 DSI host 22 a DSI host, the following properties apply to a node representing a DSI host. 39 DSI peripheral 72 Peripherals that support dual channel DSI 80 an input endpoint of the DSI peripheral. 87 - (1), (2) and (3) are examples of a DSI host and peripheral on the DSI bus 90 DSI host using of-graph bindings. [all …]
|
A D | truly,nt35597.txt | 1 Truly model NT35597 DSI display driver 18 for single DSI or Dual DSI 19 This should be low for dual DSI and high for single DSI mode 23 - port@0: DSI input port driven by master DSI 24 - port@1: DSI input port driven by secondary DSI
|
A D | brcm,bcm2835-dsi0.yaml | 7 title: Broadcom VC4 (VideoCore4) DSI Controller 30 - description: The DSI PLL clock feeding the DSI analog PHY 31 - description: The DSI ESC clock 32 - description: The DSI pixel clock 43 # - description: The DSI byte clock for the PHY 44 # - description: The DSI DDR2 clock 45 # - description: The DSI DDR clock
|
A D | dsi-controller.yaml | 7 title: Common Properties for DSI Display Panels 13 This document defines device tree properties common to DSI, Display 22 Notice: this binding concerns DSI panels connected directly to a master 23 without any intermediate port graph to the panel. Each DSI master 41 description: Panels connected to the DSI link 49 The virtual channel number of a DSI peripheral. Must be in the range 50 from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI 59 another DSI host to drive the same peripheral. Hardware supporting 61 to be driven by the same clock. Only the DSI host instance
|
A D | st,stm32-dsi.yaml | 7 title: STMicroelectronics STM32 DSI host controller 14 The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller. 29 - description: DSI bus clock 58 DSI input port node, connected to the ltdc rgb output port. 64 DSI output port node, connected to a panel or a bridge input port.
|
/linux-6.3-rc2/Documentation/devicetree/bindings/clock/ |
A D | qcom,mmcc.yaml | 85 - description: DSI phy instance 1 dsi clock 86 - description: DSI phy instance 1 byte clock 87 - description: DSI phy instance 2 dsi clock 88 - description: DSI phy instance 2 byte clock 117 - description: DSI phy instance 0 dsi clock 118 - description: DSI phy instance 0 byte clock 119 - description: DSI phy instance 1 dsi clock 120 - description: DSI phy instance 1 byte clock 156 - description: DSI phy instance 0 dsi clock 158 - description: DSI phy instance 1 dsi clock [all …]
|
A D | qcom,dispcc-sc8280xp.yaml | 38 - description: DSI 0 PLL byte clock 39 - description: DSI 0 PLL DSI clock 40 - description: DSI 1 PLL byte clock 41 - description: DSI 1 PLL DSI clock
|
/linux-6.3-rc2/drivers/gpu/drm/bridge/ |
A D | Kconfig | 92 tristate "Lontium LT8912B DSI/HDMI bridge" 108 tristate "Lontium LT9211 DSI/LVDS/DPI bridge" 121 tristate "Lontium LT9611 DSI/HDMI bridge" 135 tristate "Lontium LT9611UXC DSI/HDMI bridge" 221 MIPI DSI to eDP converter 265 tristate "TC358762 DSI/DPI bridge" 271 Toshiba TC358762 DSI/DPI bridge driver. 274 tristate "TC358764 DSI/LVDS bridge" 280 Toshiba TC358764 DSI/LVDS bridge driver. 295 tristate "Toshiba TC358768 MIPI DSI bridge" [all …]
|
/linux-6.3-rc2/Documentation/devicetree/bindings/display/bridge/ |
A D | renesas,dsi.yaml | 7 title: Renesas RZ/G2L MIPI DSI Encoder 36 - description: DSI Packet Receive interrupt 37 - description: DSI Fatal Error interrupt 38 - description: DSI D-PHY PPI interrupt 53 - description: DSI D-PHY PLL multiplied clock 54 - description: DSI D-PHY system clock 55 - description: DSI AXI bus clock 56 - description: DSI Register access clock 57 - description: DSI Video clock 58 - description: DSI D-PHY Escape mode transmit clock [all …]
|
A D | ti,sn65dsi83.yaml | 7 title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip 13 Texas Instruments SN65DSI83 1x Single-link MIPI DSI 16 Texas Instruments SN65DSI84 1x Single-link MIPI DSI 45 description: Video port for MIPI DSI Channel-A input 54 description: array of physical DSI data lane indexes. 65 description: Video port for MIPI DSI Channel-B input 74 description: array of physical DSI data lane indexes.
|
A D | intel,keembay-dsi.yaml | 27 - description: MIPI DSI clock 28 - description: MIPI DSI econfig clock 29 - description: MIPI DSI config clock 43 description: MIPI DSI input port. 47 description: DSI output port.
|
A D | chipone,icn6211.yaml | 7 title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge 13 ICN6211 is MIPI-DSI to RGB Converter bridge from chipone. 15 It has a flexible configuration of MIPI DSI signal input and 25 description: virtual channel number of a DSI peripheral 56 Video port for MIPI DSI input 65 description: array of physical DSI data lane indexes.
|
A D | lontium,lt9211.yaml | 7 title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge. 13 The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS 14 or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI. 41 Primary MIPI DSI port-1 for MIPI input or 54 Primary MIPI DSI port-1 for MIPI output or
|
A D | toshiba,tc358764.txt | 1 TC358764 MIPI-DSI to LVDS panel bridge 5 - reg: the virtual channel number of a DSI peripheral 13 0: DSI Input, not required, if the bridge is DSI controlled
|
A D | toshiba,tc358762.yaml | 7 title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge 13 The TC358762 is bridge device which converts MIPI DSI to MIPI DPI. 22 description: virtual channel number of a DSI peripheral 34 Video port for MIPI DSI input
|
A D | renesas,dsi-csi2-tx.yaml | 7 title: Renesas R-Car MIPI DSI/CSI-2 Encoder 13 This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas 14 R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up 29 - description: DSI (and CSI-2) functional clock 55 description: DSI/CSI-2 output port
|
/linux-6.3-rc2/Documentation/devicetree/bindings/display/panel/ |
A D | sharp,lq101r1sx01.yaml | 13 This panel requires a dual-channel DSI host to operate. It supports two modes: 17 Each of the DSI channels controls a separate DSI peripheral. The peripheral 18 driven by the first link (DSI-LINK1), left or even, is considered the primary 20 to the peripheral driven by the second link (DSI-LINK2, right or odd). 22 Note that in video mode the DSI-LINK1 interface always provides the left/even 23 pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it 47 phandle to the DSI peripheral on the secondary link. Note that the 48 presence of this property marks the containing node as DSI-LINK1
|
A D | orisetech,otm8009a.yaml | 7 title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) 14 a MIPI-DSI video interface. Its backlight is managed through the DSI link. 25 description: DSI virtual channel
|
A D | raspberrypi,7inch-touchscreen.yaml | 14 This DSI panel contains: 16 - TC358762 DSI->DPI bridge 17 - Atmel microcontroller on I2C for power sequencing the DSI bridge and 21 and this binding covers the DSI display parts but not its touch input.
|
/linux-6.3-rc2/drivers/gpu/drm/msm/ |
A D | Kconfig | 97 bool "Enable DSI support in MSM DRM driver" 103 Choose this option if you have a need for MIPI DSI connector 107 bool "Enable DSI 28nm PHY driver in MSM DRM" 111 Choose this option if the 28nm DSI PHY is used on the platform. 114 bool "Enable DSI 20nm PHY driver in MSM DRM" 118 Choose this option if the 20nm DSI PHY is used on the platform. 121 bool "Enable DSI 28nm 8960 PHY driver in MSM DRM" 133 Choose this option if DSI PHY on 8996 is used on the platform. 136 bool "Enable DSI 10nm PHY driver in MSM DRM (used by SDM845)" 140 Choose this option if DSI PHY on SDM845 is used on the platform. [all …]
|
/linux-6.3-rc2/Documentation/devicetree/bindings/display/exynos/ |
A D | exynos_dsim.txt | 1 Exynos MIPI DSI Master 11 - interrupts: should contain DSI interrupt 23 according to DSI host bindings (see MIPI DSI bindings [1]) 24 - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst 26 - samsung,esc-clock-frequency: specifies DSI frequency in escape mode 32 Should contain DSI peripheral nodes (see MIPI DSI bindings [1]). 37 1: DSI output
|
/linux-6.3-rc2/drivers/gpu/drm/panel/ |
A D | Kconfig | 77 45NA WUXGA PANEL DSI Video Mode panel 154 4-lane 800x1280 MIPI DSI panel. 370 tristate "Novatek NT35950 DSI panel" 381 tristate "Novatek NT36672A DSI panel" 475 (1080x1920) DSI panel. 484 720x1280 DSI video mode panel. 493 RB070D30 1024x600 DSI panel. 556 DSI. 574 S6E63M0 panel using DSI. 699 tristate "TDO TL070WSH30 DSI panel" [all …]
|
/linux-6.3-rc2/Documentation/devicetree/bindings/display/ti/ |
A D | ti,omap5-dss.txt | 21 - DSS Submodules: RFBI, DSI, HDMI 59 DSI 66 - interrupts: the DSI interrupt line 68 - vdd-supply: power supply for DSI 73 - Video port for DSI output 74 - DSI controlled peripherals 76 DSI Endpoint required properties: 77 - lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
|
A D | ti,omap4-dss.txt | 21 - DSS Submodules: RFBI, VENC, DSI, HDMI 78 DSI 85 - interrupts: the DSI interrupt line 87 - vdd-supply: power supply for DSI 92 - Video port for DSI output 93 - DSI controlled peripherals 95 DSI Endpoint required properties: 96 - lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
|
/linux-6.3-rc2/drivers/gpu/drm/bridge/cadence/ |
A D | Kconfig | 3 tristate "Cadence DPI/DSI bridge" 10 Support Cadence DPI to DSI bridge. This is an internal 16 bool "J721E Cadence DSI wrapper support" 19 Support J721E Cadence DSI wrapper. The wrapper manages 20 the routing of the DSS DPI signal to the Cadence DSI.
|