1 /** @file 2 * @brief Internal APIs for Bluetooth RFCOMM handling. 3 */ 4 5 /* 6 * Copyright (c) 2015-2016 Intel Corporation 7 * 8 * SPDX-License-Identifier: Apache-2.0 9 */ 10 11 #include <bluetooth/rfcomm.h> 12 13 typedef enum { 14 BT_RFCOMM_CFC_UNKNOWN, 15 BT_RFCOMM_CFC_NOT_SUPPORTED, 16 BT_RFCOMM_CFC_SUPPORTED, 17 } __packed bt_rfcomm_cfc_t; 18 19 /* RFCOMM signalling connection specific context */ 20 struct bt_rfcomm_session { 21 /* L2CAP channel this context is associated with */ 22 struct bt_l2cap_br_chan br_chan; 23 /* Response Timeout eXpired (RTX) timer */ 24 struct k_delayed_work rtx_work; 25 /* Binary sem for aggregate fc */ 26 struct k_sem fc; 27 struct bt_rfcomm_dlc *dlcs; 28 u16_t mtu; 29 u8_t state; 30 bt_rfcomm_role_t role; 31 bt_rfcomm_cfc_t cfc; 32 }; 33 34 enum { 35 BT_RFCOMM_STATE_IDLE, 36 BT_RFCOMM_STATE_INIT, 37 BT_RFCOMM_STATE_SECURITY_PENDING, 38 BT_RFCOMM_STATE_CONNECTING, 39 BT_RFCOMM_STATE_CONNECTED, 40 BT_RFCOMM_STATE_CONFIG, 41 BT_RFCOMM_STATE_USER_DISCONNECT, 42 BT_RFCOMM_STATE_DISCONNECTING, 43 BT_RFCOMM_STATE_DISCONNECTED, 44 }; 45 46 struct bt_rfcomm_hdr { 47 u8_t address; 48 u8_t control; 49 u8_t length; 50 } __packed; 51 52 #define BT_RFCOMM_SABM 0x2f 53 #define BT_RFCOMM_UA 0x63 54 #define BT_RFCOMM_UIH 0xef 55 56 struct bt_rfcomm_msg_hdr { 57 u8_t type; 58 u8_t len; 59 } __packed; 60 61 #define BT_RFCOMM_PN 0x20 62 struct bt_rfcomm_pn { 63 u8_t dlci; 64 u8_t flow_ctrl; 65 u8_t priority; 66 u8_t ack_timer; 67 u16_t mtu; 68 u8_t max_retrans; 69 u8_t credits; 70 } __packed; 71 72 #define BT_RFCOMM_MSC 0x38 73 struct bt_rfcomm_msc { 74 u8_t dlci; 75 u8_t v24_signal; 76 } __packed; 77 78 #define BT_RFCOMM_DISC 0x43 79 #define BT_RFCOMM_DM 0x0f 80 81 #define BT_RFCOMM_RLS 0x14 82 struct bt_rfcomm_rls { 83 u8_t dlci; 84 u8_t line_status; 85 } __packed; 86 87 #define BT_RFCOMM_RPN 0x24 88 struct bt_rfcomm_rpn { 89 u8_t dlci; 90 u8_t baud_rate; 91 u8_t line_settings; 92 u8_t flow_control; 93 u8_t xon_char; 94 u8_t xoff_char; 95 u16_t param_mask; 96 } __packed; 97 98 #define BT_RFCOMM_TEST 0x08 99 #define BT_RFCOMM_NSC 0x04 100 101 #define BT_RFCOMM_FCON 0x28 102 #define BT_RFCOMM_FCOFF 0x18 103 104 /* Default RPN Settings */ 105 #define BT_RFCOMM_RPN_BAUD_RATE_9600 0x03 106 #define BT_RFCOMM_RPN_DATA_BITS_8 0x03 107 #define BT_RFCOMM_RPN_STOP_BITS_1 0x00 108 #define BT_RFCOMM_RPN_PARITY_NONE 0x00 109 #define BT_RFCOMM_RPN_FLOW_NONE 0x00 110 #define BT_RFCOMM_RPN_XON_CHAR 0x11 111 #define BT_RFCOMM_RPN_XOFF_CHAR 0x13 112 113 /* Set 1 to all the param mask except reserved */ 114 #define BT_RFCOMM_RPN_PARAM_MASK_ALL 0x3f7f 115 116 #define BT_RFCOMM_SET_LINE_SETTINGS(data, stop, parity) ((data & 0x3) | \ 117 ((stop & 0x1) << 2) | \ 118 ((parity & 0x7) << 3)) 119 120 /* DV = 1 IC = 0 RTR = 1 RTC = 1 FC = 0 EXT = 0 */ 121 #define BT_RFCOMM_DEFAULT_V24_SIG 0x8d 122 123 #define BT_RFCOMM_GET_FC(v24_signal) (((v24_signal) & 0x02) >> 1) 124 125 #define BT_RFCOMM_SIG_MIN_MTU 23 126 #define BT_RFCOMM_SIG_MAX_MTU 32767 127 128 #define BT_RFCOMM_CHECK_MTU(mtu) (!!((mtu) >= BT_RFCOMM_SIG_MIN_MTU && \ 129 (mtu) <= BT_RFCOMM_SIG_MAX_MTU)) 130 131 /* Helper to calculate needed outgoing buffer size. 132 * Length in rfcomm header can be two bytes depending on user data length. 133 * One byte in the tail should be reserved for FCS. 134 */ 135 #define BT_RFCOMM_BUF_SIZE(mtu) (BT_BUF_RESERVE + \ 136 BT_HCI_ACL_HDR_SIZE + BT_L2CAP_HDR_SIZE + \ 137 sizeof(struct bt_rfcomm_hdr) + 1 + (mtu) + \ 138 BT_RFCOMM_FCS_SIZE) 139 140 #define BT_RFCOMM_GET_DLCI(addr) (((addr) & 0xfc) >> 2) 141 #define BT_RFCOMM_GET_FRAME_TYPE(ctrl) ((ctrl) & 0xef) 142 #define BT_RFCOMM_GET_MSG_TYPE(type) (((type) & 0xfc) >> 2) 143 #define BT_RFCOMM_GET_MSG_CR(type) (((type) & 0x02) >> 1) 144 #define BT_RFCOMM_GET_LEN(len) (((len) & 0xfe) >> 1) 145 #define BT_RFCOMM_GET_CHANNEL(dlci) ((dlci) >> 1) 146 #define BT_RFCOMM_GET_PF(ctrl) (((ctrl) & 0x10) >> 4) 147 148 #define BT_RFCOMM_SET_ADDR(dlci, cr) ((((dlci) & 0x3f) << 2) | \ 149 ((cr) << 1) | 0x01) 150 #define BT_RFCOMM_SET_CTRL(type, pf) (((type) & 0xef) | ((pf) << 4)) 151 #define BT_RFCOMM_SET_LEN_8(len) (((len) << 1) | 1) 152 #define BT_RFCOMM_SET_LEN_16(len) ((len) << 1) 153 #define BT_RFCOMM_SET_MSG_TYPE(type, cr) (((type) << 2) | (cr << 1) | 0x01) 154 155 #define BT_RFCOMM_LEN_EXTENDED(len) (!((len) & 0x01)) 156 157 /* For CR in UIH Packet header 158 * Initiating station have the C/R bit set to 1 and those sent by the 159 * responding station have the C/R bit set to 0 160 */ 161 #define BT_RFCOMM_UIH_CR(role) ((role) == BT_RFCOMM_ROLE_INITIATOR) 162 163 /* For CR in Non UIH Packet header 164 * Command 165 * Initiator --> Responder 1 166 * Responder --> Initiator 0 167 * Response 168 * Initiator --> Responder 0 169 * Responder --> Initiator 1 170 */ 171 #define BT_RFCOMM_CMD_CR(role) ((role) == BT_RFCOMM_ROLE_INITIATOR) 172 #define BT_RFCOMM_RESP_CR(role) ((role) == BT_RFCOMM_ROLE_ACCEPTOR) 173 174 /* For CR in MSG header 175 * If the C/R bit is set to 1 the message is a command, 176 * if it is set to 0 the message is a response. 177 */ 178 #define BT_RFCOMM_MSG_CMD_CR 1 179 #define BT_RFCOMM_MSG_RESP_CR 0 180 181 #define BT_RFCOMM_DLCI(role, channel) ((((channel) & 0x1f) << 1) | \ 182 ((role) == BT_RFCOMM_ROLE_ACCEPTOR)) 183 184 /* Excluding ext bit */ 185 #define BT_RFCOMM_MAX_LEN_8 127 186 187 /* Length can be 2 bytes depending on data size */ 188 #define BT_RFCOMM_HDR_SIZE (sizeof(struct bt_rfcomm_hdr) + 1) 189 #define BT_RFCOMM_FCS_SIZE 1 190 191 #define BT_RFCOMM_FCS_LEN_UIH 2 192 #define BT_RFCOMM_FCS_LEN_NON_UIH 3 193 194 /* For non UIH packets 195 * The P bit set to 1 shall be used to solicit a response frame with the 196 * F bit set to 1 from the other station. 197 */ 198 #define BT_RFCOMM_PF_NON_UIH 1 199 200 /* For UIH packets 201 * Both stations set the P-bit to 0 202 * If credit based flow control is used, If P/F is 1 then one credit byte 203 * will be there after control in the frame else no credit byte. 204 */ 205 #define BT_RFCOMM_PF_UIH 0 206 #define BT_RFCOMM_PF_UIH_CREDIT 1 207 #define BT_RFCOMM_PF_UIH_NO_CREDIT 0 208 209 #define BT_RFCOMM_PN_CFC_CMD 0xf0 210 #define BT_RFCOMM_PN_CFC_RESP 0xe0 211 212 /* Initialize RFCOMM signal layer */ 213 void bt_rfcomm_init(void); 214