liblzma.so.5 _ITM_deregisterTMCloneTable __gmon_start__ _Jv_RegisterClasses _ITM_registerTMCloneTable lzma_version_string lzma_get_progress lzma_check_size lzma_alone_decoder lzma_block_compressed_size lzma_index_end lzma_index_iter_rewind lzma_raw_decoder_memusage lzma_lzma_preset lzma_cputhreads lzma_stream_decoder lzma_raw_encoder_memusage lzma_raw_decoder lzma_properties_decode lzma_index_file_size lzma_index_uncompressed_size lzma_index_block_count lzma_index_iter_next lzma_file_info_decoder lzma_alone_encoder lzma_index_stream_count lzma_check_is_supported lzma_stream_encoder lzma_raw_encoder lzma_code lzma_version_number lzma_stream_encoder_mt_memusage lzma_stream_encoder_mt lzma_physmem lzma_end lzma_index_checks lzma_block_header_decode lzma_memusage lzma_index_iter_init libpthread.so.0 write raise lseek64 read pthread_sigmask __errno_location fcntl sigaction libc.so.6 _IO_stdin_used fchmod exit setlocale mbrtowc optind strrchr pipe ngettext sigfillset __stack_chk_fail unlink putchar realloc stdin program_invocation_name isatty feof fgetc futimens strlen sigemptyset memset strstr memcmp vsnprintf poll sigaddset fchown stdout fputc fputs memcpy fclose mbsinit __ctype_b_loc getenv optarg stderr wcwidth alarm getopt_long geteuid clock_gettime strchr fopen64 bindtextdomain strcmp strerror __libc_start_main ferror vfprintf posix_fadvise64 free __progname_full __xstat64 __fxstat64 __lxstat64 GLIBC_2.3 GLIBC_2.3.3 GLIBC_2.6 GLIBC_2.2 GLIBC_2.4 GLIBC_2.1 GLIBC_2.17 GLIBC_2.0 XZ_5.3.1alpha XZ_5.2 XZ_5.0
(stdin) %s: Invalid argument to --block-list %s: Too many arguments to --block-list block-list 0 can only be used as the last element in --block-list memlimit-compress% memlimit-compress memlimit-decompress% memlimit-decompress memlimit% memlimit threads C %s: Unknown file format type %s: Unsupported integrity check type block-size Only one file can be specified with `--files' or `--files0'. r rb %s: %s flush-timeout The environment variable %s contains too many arguments xzcat unxz lzcat unlzma lzma XZ_DEFAULTS XZ_OPT auto xz lzma alone raw none crc32 crc64 sha256 cC:defF:hHlkM:qQrS:tT:vVz0123456789 compress decompress uncompress test list keep force stdout to-stdout single-stream no-sparse suffix files files0 format check ignore-check memory no-adjust extreme fast best lzma1 lzma2 x86 powerpc ia64 arm armthumb sparc delta quiet verbose no-warn robot info-memory help long-help version $M z -M d 8M d CM t HM l MM k RM f XM c _M c iM wM M S M M M F M C M K J K 5K SK M M M M \K T K M e M 0 M 9 M M M M M M M M N N q N v N Q N $N 0N h 5N H ?N V - Maximum number of filters is four Memory usage limit is too low for the given filter setup. Using a preset in raw mode is discouraged. The exact options of the presets may vary between software versions. The .lzma format supports only the LZMA1 filter LZMA1 cannot be used with the .xz format The filter chain is incompatible with --flush-timeout Switching to single-threaded mode due to --flush-timeout Using up to %u threads. Unsupported filter chain or filter options Decompression will need %s MiB of memory. Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB %s: %s 7zXZ Error creating a pipe: %s %s: poll() failed: %s %s: File seems to have been moved, not removing %s: Cannot remove: %s %s: Cannot set the file owner: %s %s: Cannot set the file group: %s %s: Cannot set the file permissions: %s Error getting the file status flags from standard input: %s %s: Is a symbolic link, skipping %s: %s %s: Is a directory, skipping %s: Not a regular file, skipping %s: File has setuid or setgid bit set, skipping %s: File has sticky bit set, skipping %s: Input file has more than one hard link, skipping Error restoring the status flags to standard input: %s (stdout) Error getting the file status flags from standard output: %s Error restoring the O_APPEND flag to standard output: %s %s: Closing the file failed: %s %s: Seeking failed when trying to create a sparse file: %s %s: Read error: %s %s: Error seeking the file: %s %s: Unexpected end of file %s: Write error: %s Disabled %s %s %s %s MiB (%s B) %llu %llu %llu Total amount of physical memory (RAM): Memory usage limit for compression: Memory usage limit for decompression: %s: Error reading filenames: %s %s: Unexpected end of input when reading filenames %s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'? /usr/local/share/locale xz Compression and decompression with --robot are not supported yet. - Cannot read data from standard input when reading filenames from standard input %s (%u) %s (%u/%u) --- % %.1f %% %s / %s > %.3f = %.3f %.*f %s %u:%02u:%02u %u:%02u %u s %u min %u s %u min %u h %u min %u h %u d %u h %u d %*s %*s %*s %10s %10s 100 % %*s %*s %*s %10s %10s %s: %s, , %s Internal error (bug) Cannot establish signal handlers No integrity check; not verifying file integrity Unsupported type of integrity check; not verifying file integrity Memory usage limit reached File format not recognized Unsupported options Compressed data is corrupt Unexpected end of input ( ( ( ( ( %s MiB of memory is required. The limiter is disabled. %s B %s MiB %s MiB of memory is required. The limit is %s. %uMiB %uKiB %u -- -- %s fast normal UNKNOWN hc3 hc4 bt2 bt3 bt4 lzma%c=dict=%s ,lc=%u,lp=%u,pb=%u,mode=%s,nice=%u,mf=%s,depth=%u =start=%u delta=dist=%u %s: Filter chain: %s Try `%s --help' for more information. XZ_VERSION=%u LIBLZMA_VERSION=%u xz (XZ Utils) 5.3.1alpha liblzma %s Usage: %s [OPTION]... [FILE]... Compress or decompress FILEs in the .xz format. Mandatory arguments to long options are mandatory for short options too. Operation mode: -z, --compress force compression -d, --decompress force decompression -t, --test test compressed file integrity -l, --list list information about .xz files Operation modifiers: -k, --keep keep (don't delete) input files -f, --force force overwrite of output file and (de)compress links -c, --stdout write to standard output and don't delete input files --single-stream decompress only the first stream, and silently ignore possible remaining input data --no-sparse do not create sparse files when decompressing -S, --suffix=.SUF use the suffix `.SUF' on compressed files --files[=FILE] read filenames to process from FILE; if FILE is omitted, filenames are read from the standard input; filenames must be terminated with the newline character --files0[=FILE] like --files but use the null character as terminator Basic file format and compression options: -F, --format=FMT file format to encode or decode; possible values are `auto' (default), `xz', `lzma', and `raw' -C, --check=CHECK integrity check type: `none' (use with caution), `crc32', `crc64' (default), or `sha256' --ignore-check don't verify the integrity check when decompressing -0 ... -9 compression preset; default is 6; take compressor *and* decompressor memory usage into account before using 7-9! -e, --extreme try to improve compression ratio by using more CPU time; does not affect decompressor memory requirements -T, --threads=NUM use at most NUM threads; the default is 1; set to 0 to use as many threads as there are processor cores --block-size=SIZE start a new .xz block after every SIZE bytes of input; use this to set the block size for threaded compression --block-list=SIZES start a new .xz block after the given comma-separated intervals of uncompressed data --flush-timeout=TIMEOUT when compressing, if more than TIMEOUT milliseconds has passed since the previous flush and reading more input would block, all pending data is flushed out --memlimit-compress=LIMIT --memlimit-decompress=LIMIT -M, --memlimit=LIMIT set memory usage limit for compression, decompression, or both; LIMIT is in bytes, % of RAM, or 0 for defaults --no-adjust if compression settings exceed the memory usage limit, give an error instead of adjusting the settings downwards Custom filter chain for compression (alternative for using presets): --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or --lzma2[=OPTS] more of the following options (valid values; default): preset=PRE reset options to a preset (0-9[e]) dict=NUM dictionary size (4KiB - 1536MiB; 8MiB) lc=NUM number of literal context bits (0-4; 3) lp=NUM number of literal position bits (0-4; 0) pb=NUM number of position bits (0-4; 2) mode=MODE compression mode (fast, normal; normal) nice=NUM nice length of a match (2-273; 64) mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4) depth=NUM maximum search depth; 0=automatic (default) --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit) --powerpc[=OPTS] PowerPC BCJ filter (big endian only) --ia64[=OPTS] IA-64 (Itanium) BCJ filter --arm[=OPTS] ARM BCJ filter (little endian only) --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only) --sparc[=OPTS] SPARC BCJ filter Valid OPTS for all BCJ filters: start=NUM start offset for conversions (default=0) --delta[=OPTS] Delta filter; valid OPTS (valid values; default): dist=NUM distance between bytes being subtracted from each other (1-256; 1) Other options: -q, --quiet suppress warnings; specify twice to suppress errors too -v, --verbose be verbose; specify twice for even more verbose -Q, --no-warn make warnings not affect the exit status --robot use machine-parsable messages (useful for scripts) --info-memory display the total amount of RAM and the currently active memory usage limits, and exit -h, --help display the short help (lists only the basic options) -H, --long-help display this long help and exit -h, --help display this short help and exit -H, --long-help display the long help (lists also the advanced options) -V, --version display the version number and exit With no FILE, or when FILE is -, read standard input. Report bugs to <%s> (in English or Finnish). lasse.collin@tukaani.org %s home page: <%s> https://tukaani.org/xz/ XZ Utils THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE. KiB/s MiB/s GiB/s x86 powerpc ia64 arm armthumb sparc ?@ X@ 0@sh | #@ Mb ? @ 8 @ #@ @ @ %s: Options must be `name=value' pairs separated with commas %s: Invalid option name %s: Invalid option value Unsupported LZMA1/LZMA2 preset: %s ! , 7 B M X c The sum of lc and lp must not exceed 4 The selected match finder requires at least nice=%u dist u start v preset dict lc lp pb mode nice mf depth Pv Wv ` \v _v bv ev x jv ov w rv hc3 hc4 bt2 bt3 bt4 pw tw xw |w w fast normal w w %s: With --format=raw, --suffix=.SUF is required unless writing to stdout %s: Filename has an unknown suffix, skipping %s: File already has `%s' suffix, skipping %s: Invalid filename suffix .xz .txz .tar .lzma .tlz y @x y y y @x y y y y y y %s max %s: Value is not a non-negative decimal integer i iB B %s: Invalid multiplier suffix Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30). Value of the option `%s' must be in the range [%llu, %llu] %'u %'llu %llu %u %'.1f %.1f %s (%'llu B) (%llu B) Empty filename, skipping Compressed data cannot be read from a terminal Compressed data cannot be written to a terminal B KiB MiB GiB TiB ?@ @3333 @/dev/null Unknown error Writing to standard output failed %s: %s: %s Streams: Blocks: Compressed size: Uncompressed size: Ratio: Check: Stream Padding: Memory needed: Sizes in headers: Number of files: Stream Block Blocks CompOffset UncompOffset CompSize UncompSize TotalSize Ratio Check CheckVal Padding Header Flags MemUsage Filters None CRC32 Unknown-2 Unknown-3 CRC64 Unknown-5 Unknown-6 Unknown-7 Unknown-8 Unknown-9 SHA-256 Unknown-11 Unknown-12 Unknown-13 Unknown-14 Unknown-15 beta alpha %u.%u.%u%s %s: File is empty %s: Too small to be a valid .xz file %s: %s %08x %016llx %02x --- %.3f , , %s%s Strms Blocks Compressed Uncompressed Ratio Check Filename %*s %*s %*s %*s %*s %-*s %s %-*s %s %s %*s %*s %*s %*s %*s %*s %*s %-*s %*s %*s %*s %*s %*s %*s %*s %*s %-*s %*s %s %*s %*s %*s %*s %*s %*s %*s %-*s %-*s %*s %-*s %*s %*s %s %*s %*s %*s %-*s %-*s %*s %-*s %*s %*s MiB %s %-*s %s MiB Yes No Minimum XZ Utils version: %s name %s file %llu %llu %llu %llu %s %s %llu stream %llu %llu %llu %llu %llu %llu %s %s %llu block %llu %llu %llu %llu %llu %llu %llu %s %s %s %u %s %llu %llu %s yes no summary %llu %s %u %5s %7s %11s %11s %5s %-7s %s files %s file Totals: totals %llu %llu %llu %llu %s %s %llu %llu %llu %s %u --list works only on .xz files (--format=xz or --format=auto) --list does not support reading from standard input ?@ sh | #@
PQ , { { { { { { { { | | %| ,| 2| 9| D| Q| Z| e| o| u| {| | | | | |
GCC: (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
.symtab .strtab .shstrtab .interp .note.ABI-tag .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .plt.got .text .fini .rodata .eh_frame_hdr .eh_frame .init_array .fini_array .jcr .dynamic .got.plt .data .bss .comment
crtstuff.c __JCR_LIST__ deregister_tm_clones __do_global_dtors_aux completed.7209 __do_global_dtors_aux_fini_array_entry frame_dummy __frame_dummy_init_array_entry args.c parse_memlimit parse_block_list parse_real types.6011 types.6020 long_opts.5964 short_opts.5963 parse_environment names_stdin.6061 coder.c filters in_buf out_buf filters_count preset_number check_default mt_options forget_filter_chain memlimit_too_small opt_lzma.5819 is_format_xz magic.5848 is_format_lzma coder_init split_block coder_normal coder_passthru file_io.c warn_fchown try_sparse restore_stdin_flags restore_stdout_flags io_wait io_unlink io_copy_attrs io_open_src_real pair.5974 io_close_src io_open_dest_real io_close_dest io_write_buf is_sparse hardware.c threads_max memlimit_compress memlimit_decompress total_ram main.c read_name name.5892 size.5893 message.c files_pos files_total verbosity first_filename_printed current_filename_printed progress_automatic progress_started progress_active progress_strm progress_is_from_passthru expected_in_size progress_needs_updating progress_signal_handler print_filename progress_percentage buf.5828 progress_sizes buf.5834 progress_speed unit.5843 buf.5849 progress_time buf.5853 progress_remaining buf.5862 progress_pos progress_flush vmessage uint32_to_optstr buf.5945 bcj_names.5977 mytime.c next_flush mytime_now clk_id.5782 options.c parse_options set_delta opts.5824 set_bcj opts.5841 error_lzma_preset set_lzma opts.5880 modes.5878 mfs.5879 signals.c mythread_sigmask exit_signal hooked_signals signals_are_initialized signals_block_count sigs.5786 suffix.c custom_suffix is_dir_sep has_dir_sep test_suffix uncompressed_name suffixes.5795 msg_suffix all_suffixes.5812 util.c bufs thousand check_thousand_sep suffix.5830 tuklib_open_stdxxx.c tuklib_progname.c tuklib_exit.c tuklib_mbstr_width.c tuklib_mbstr_fw.c list.c colon_strs_fw init_colon_strs init_headings init_field_widths xz_ver_to_str buf.5975 parse_indexes parse_block_header parse_check_value parse_details get_ratio buf.6053 get_check_names print_info_basic headings_displayed.6071 print_adv_helper print_info_adv print_info_robot update_totals print_totals_basic print_totals_adv print_totals_robot __FRAME_END__ __JCR_END__ __init_array_end _DYNAMIC __init_array_start __GNU_EH_FRAME_HDR _GLOBAL_OFFSET_TABLE_ __libc_csu_fini lzma_index_iter_next@@XZ_5.0 suffix_set raise@@GLIBC_2.0 strstr@@GLIBC_2.0 lzma_index_iter_init@@XZ_5.0 lzma_index_stream_count@@XZ_5.0 strcmp@@GLIBC_2.0 io_fix_src_pos io_no_sparse read@@GLIBC_2.0 _ITM_deregisterTMCloneTable __x86.get_pc_thunk.bx lzma_code@@XZ_5.0 opt_block_list io_close hardware_threads_get stderr@@GLIBC_2.0 message_mem_needed message_filters_show opt_robot wcwidth@@GLIBC_2.0 user_abort free@@GLIBC_2.0 message_verbosity_get lzma_block_compressed_size@@XZ_5.0 memcpy@@GLIBC_2.0 mbsinit@@GLIBC_2.0 clock_gettime@@GLIBC_2.17 io_write message_verbosity_decrease ferror@@GLIBC_2.0 message_init message_progress_update flush_needed _edata fclose@@GLIBC_2.1 lzma_index_iter_rewind@@XZ_5.0 signals_exit memcmp@@GLIBC_2.0 lzma_stream_encoder_mt_memusage@@XZ_5.2 message_bug __umoddi3 args_parse message_progress_start __progname_full@@GLIBC_2.0 lzma_version_number@@XZ_5.0 options_bcj lzma_index_file_size@@XZ_5.0 optind@@GLIBC_2.0 alarm@@GLIBC_2.0 hardware_memlimit_get message_progress_end opt_block_size __stack_chk_fail@@GLIBC_2.4 signals_block io_init lzma_memusage@@XZ_5.0 fstat64 geteuid@@GLIBC_2.0 unlink@@GLIBC_2.0 opt_ignore_check xrealloc message_filename lzma_raw_encoder@@XZ_5.0 list_file tuklib_mbstr_fw io_open_dest signals_unblock opt_single_stream fopen64@@GLIBC_2.1 __udivdi3 mytime_get_elapsed poll@@GLIBC_2.0 opt_keep_original opt_flush_timeout is_empty_filename __fxstat64@@GLIBC_2.2 xstrdup tuklib_open_stdxxx lzma_get_progress@@XZ_5.2 lzma_check_size@@XZ_5.0 pthread_sigmask@@GLIBC_2.0 lseek64@@GLIBC_2.2 tuklib_exit hardware_init mbrtowc@@GLIBC_2.0 lzma_raw_decoder_memusage@@XZ_5.0 io_seek_src suffix_get_dest_name getenv@@GLIBC_2.0 realloc@@GLIBC_2.0 coder_set_preset __data_start opt_force uint64_to_nicestr opt_stdout strerror@@GLIBC_2.0 mytime_set_flush_time options_delta lzma_version_string@@XZ_5.0 __gmon_start__ message_set_files exit@@GLIBC_2.0 __dso_handle lzma_properties_decode@@XZ_5.0 gettext@@GLIBC_2.0 _IO_stdin_used message_error feof@@GLIBC_2.0 getopt_long@@GLIBC_2.0 lzma_file_info_decoder@@XZ_5.3.1alpha stdin_filename strchr@@GLIBC_2.0 lzma_index_end@@XZ_5.0 strlen@@GLIBC_2.0 hardware_memlimit_show fchown@@GLIBC_2.0 __libc_start_main@@GLIBC_2.0 lzma_stream_decoder@@XZ_5.0 lzma_block_header_decode@@XZ_5.0 write@@GLIBC_2.0 lzma_alone_decoder@@XZ_5.0 lstat64 open64@@GLIBC_2.2 lzma_end@@XZ_5.0 message_verbosity_increase signals_init __libc_csu_init stdin@@GLIBC_2.0 fcntl@@GLIBC_2.0 message_strm sigaddset@@GLIBC_2.0 coder_add_filter hardware_memlimit_set sigfillset@@GLIBC_2.0 memset@@GLIBC_2.0 putchar@@GLIBC_2.0 __errno_location@@GLIBC_2.0 coder_set_check message_fatal _fp_hw list_totals fgetc@@GLIBC_2.0 coder_set_compression_settings opt_auto_adjust mytime_get_flush_timeout mytime_set_start_time pipe@@GLIBC_2.0 stdout@@GLIBC_2.0 lzma_raw_decoder@@XZ_5.0 __bss_start is_tty_stdin main io_pread lzma_stream_encoder_mt@@XZ_5.2 set_exit_no_warn lzma_alone_encoder@@XZ_5.0 io_open_src sigemptyset@@GLIBC_2.0 program_invocation_name@@GLIBC_2.0 vfprintf@@GLIBC_2.0 setlocale@@GLIBC_2.0 strrchr@@GLIBC_2.0 io_write_to_user_abort_pipe options_lzma fputc@@GLIBC_2.0 lzma_cputhreads@@XZ_5.2 message_help _Jv_RegisterClasses lzma_index_checks@@XZ_5.0 futimens@@GLIBC_2.6 lzma_physmem@@XZ_5.0 lzma_index_uncompressed_size@@XZ_5.0 vsnprintf@@GLIBC_2.0 message_signal_handler io_read message_version set_exit_status coder_run round_up_to_mib tuklib_progname_init str_to_uint64 __TMC_END__ my_snprintf message_progress_sigs lzma_check_is_supported@@XZ_5.0 sigaction@@GLIBC_2.0 lzma_stream_encoder@@XZ_5.0 bindtextdomain@@GLIBC_2.0 _ITM_registerTMCloneTable posix_fadvise64@@GLIBC_2.3.3 isatty@@GLIBC_2.0 __xstat64@@GLIBC_2.2 optarg@@GLIBC_2.0 message_filters_to_str lzma_lzma_preset@@XZ_5.0 message_try_help fputs@@GLIBC_2.0 lzma_raw_encoder_memusage@@XZ_5.0 __lxstat64@@GLIBC_2.2 message_warning ngettext@@GLIBC_2.2 lzma_index_block_count@@XZ_5.0 close@@GLIBC_2.0 is_tty_stdout opt_format coder_set_extreme __ctype_b_loc@@GLIBC_2.3 tuklib_mbstr_width hardware_threads_set uint64_to_str opt_mode fchmod@@GLIBC_2.0
(stdin) %s: Invalid argument to --block-list %s: Too many arguments to --block-list block-list 0 can only be used as the last element in --block-list memlimit-compress% memlimit-compress memlimit-decompress% memlimit-decompress memlimit% memlimit threads C %s: Unknown file format type %s: Unsupported integrity check type block-size Only one file can be specified with `--files' or `--files0'. r rb %s: %s flush-timeout The environment variable %s contains too many arguments xzcat unxz lzcat unlzma lzma XZ_DEFAULTS XZ_OPT auto xz lzma alone raw none crc32 crc64 sha256 cC:defF:hHlkM:qQrS:tT:vVz0123456789 compress decompress uncompress test list keep force stdout to-stdout single-stream no-sparse suffix files files0 format check ignore-check memory no-adjust extreme fast best lzma1 lzma2 x86 powerpc ia64 arm armthumb sparc delta quiet verbose no-warn robot info-memory help long-help version $M z -M d 8M d CM t HM l MM k RM f XM c _M c iM wM M S M M M F M C M K J K 5K SK M M M M \K T K M e M 0 M 9 M M M M M M M M N N q N v N Q N $N 0N h 5N H ?N V - Maximum number of filters is four Memory usage limit is too low for the given filter setup. Using a preset in raw mode is discouraged. The exact options of the presets may vary between software versions. The .lzma format supports only the LZMA1 filter LZMA1 cannot be used with the .xz format The filter chain is incompatible with --flush-timeout Switching to single-threaded mode due to --flush-timeout Using up to %u threads. Unsupported filter chain or filter options Decompression will need %s MiB of memory. Adjusted the number of threads from %s to %s to not exceed the memory usage limit of %s MiB Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB %s: %s 7zXZ Error creating a pipe: %s %s: poll() failed: %s %s: File seems to have been moved, not removing %s: Cannot remove: %s %s: Cannot set the file owner: %s %s: Cannot set the file group: %s %s: Cannot set the file permissions: %s Error getting the file status flags from standard input: %s %s: Is a symbolic link, skipping %s: %s %s: Is a directory, skipping %s: Not a regular file, skipping %s: File has setuid or setgid bit set, skipping %s: File has sticky bit set, skipping %s: Input file has more than one hard link, skipping Error restoring the status flags to standard input: %s (stdout) Error getting the file status flags from standard output: %s Error restoring the O_APPEND flag to standard output: %s %s: Closing the file failed: %s %s: Seeking failed when trying to create a sparse file: %s %s: Read error: %s %s: Error seeking the file: %s %s: Unexpected end of file %s: Write error: %s Disabled %s %s %s %s MiB (%s B) %llu %llu %llu Total amount of physical memory (RAM): Memory usage limit for compression: Memory usage limit for decompression: %s: Error reading filenames: %s %s: Unexpected end of input when reading filenames %s: Null character found when reading filenames; maybe you meant to use `--files0' instead of `--files'? /usr/local/share/locale xz Compression and decompression with --robot are not supported yet. - Cannot read data from standard input when reading filenames from standard input %s (%u) %s (%u/%u) --- % %.1f %% %s / %s > %.3f = %.3f %.*f %s %u:%02u:%02u %u:%02u %u s %u min %u s %u min %u h %u min %u h %u d %u h %u d %*s %*s %*s %10s %10s 100 % %*s %*s %*s %10s %10s %s: %s, , %s Internal error (bug) Cannot establish signal handlers No integrity check; not verifying file integrity Unsupported type of integrity check; not verifying file integrity Memory usage limit reached File format not recognized Unsupported options Compressed data is corrupt Unexpected end of input ( ( ( ( ( %s MiB of memory is required. The limiter is disabled. %s B %s MiB %s MiB of memory is required. The limit is %s. %uMiB %uKiB %u -- -- %s fast normal UNKNOWN hc3 hc4 bt2 bt3 bt4 lzma%c=dict=%s ,lc=%u,lp=%u,pb=%u,mode=%s,nice=%u,mf=%s,depth=%u =start=%u delta=dist=%u %s: Filter chain: %s Try `%s --help' for more information. XZ_VERSION=%u LIBLZMA_VERSION=%u xz (XZ Utils) 5.3.1alpha liblzma %s Usage: %s [OPTION]... [FILE]... Compress or decompress FILEs in the .xz format. Mandatory arguments to long options are mandatory for short options too. Operation mode: -z, --compress force compression -d, --decompress force decompression -t, --test test compressed file integrity -l, --list list information about .xz files Operation modifiers: -k, --keep keep (don't delete) input files -f, --force force overwrite of output file and (de)compress links -c, --stdout write to standard output and don't delete input files --single-stream decompress only the first stream, and silently ignore possible remaining input data --no-sparse do not create sparse files when decompressing -S, --suffix=.SUF use the suffix `.SUF' on compressed files --files[=FILE] read filenames to process from FILE; if FILE is omitted, filenames are read from the standard input; filenames must be terminated with the newline character --files0[=FILE] like --files but use the null character as terminator Basic file format and compression options: -F, --format=FMT file format to encode or decode; possible values are `auto' (default), `xz', `lzma', and `raw' -C, --check=CHECK integrity check type: `none' (use with caution), `crc32', `crc64' (default), or `sha256' --ignore-check don't verify the integrity check when decompressing -0 ... -9 compression preset; default is 6; take compressor *and* decompressor memory usage into account before using 7-9! -e, --extreme try to improve compression ratio by using more CPU time; does not affect decompressor memory requirements -T, --threads=NUM use at most NUM threads; the default is 1; set to 0 to use as many threads as there are processor cores --block-size=SIZE start a new .xz block after every SIZE bytes of input; use this to set the block size for threaded compression --block-list=SIZES start a new .xz block after the given comma-separated intervals of uncompressed data --flush-timeout=TIMEOUT when compressing, if more than TIMEOUT milliseconds has passed since the previous flush and reading more input would block, all pending data is flushed out --memlimit-compress=LIMIT --memlimit-decompress=LIMIT -M, --memlimit=LIMIT set memory usage limit for compression, decompression, or both; LIMIT is in bytes, % of RAM, or 0 for defaults --no-adjust if compression settings exceed the memory usage limit, give an error instead of adjusting the settings downwards Custom filter chain for compression (alternative for using presets): --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or --lzma2[=OPTS] more of the following options (valid values; default): preset=PRE reset options to a preset (0-9[e]) dict=NUM dictionary size (4KiB - 1536MiB; 8MiB) lc=NUM number of literal context bits (0-4; 3) lp=NUM number of literal position bits (0-4; 0) pb=NUM number of position bits (0-4; 2) mode=MODE compression mode (fast, normal; normal) nice=NUM nice length of a match (2-273; 64) mf=NAME match finder (hc3, hc4, bt2, bt3, bt4; bt4) depth=NUM maximum search depth; 0=automatic (default) --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit) --powerpc[=OPTS] PowerPC BCJ filter (big endian only) --ia64[=OPTS] IA-64 (Itanium) BCJ filter --arm[=OPTS] ARM BCJ filter (little endian only) --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only) --sparc[=OPTS] SPARC BCJ filter Valid OPTS for all BCJ filters: start=NUM start offset for conversions (default=0) --delta[=OPTS] Delta filter; valid OPTS (valid values; default): dist=NUM distance between bytes being subtracted from each other (1-256; 1) Other options: -q, --quiet suppress warnings; specify twice to suppress errors too -v, --verbose be verbose; specify twice for even more verbose -Q, --no-warn make warnings not affect the exit status --robot use machine-parsable messages (useful for scripts) --info-memory display the total amount of RAM and the currently active memory usage limits, and exit -h, --help display the short help (lists only the basic options) -H, --long-help display this long help and exit -h, --help display this short help and exit -H, --long-help display the long help (lists also the advanced options) -V, --version display the version number and exit With no FILE, or when FILE is -, read standard input. Report bugs to <%s> (in English or Finnish). lasse.collin@tukaani.org %s home page: <%s> https://tukaani.org/xz/ XZ Utils THIS IS A DEVELOPMENT VERSION NOT INTENDED FOR PRODUCTION USE. KiB/s MiB/s GiB/s x86 powerpc ia64 arm armthumb sparc ?@ X@ 0@sh | #@ Mb ? @ 8 @ #@ @ @ %s: Options must be `name=value' pairs separated with commas %s: Invalid option name %s: Invalid option value Unsupported LZMA1/LZMA2 preset: %s ! , 7 B M X c The sum of lc and lp must not exceed 4 The selected match finder requires at least nice=%u dist u start v preset dict lc lp pb mode nice mf depth Pv Wv ` \v _v bv ev x jv ov w rv hc3 hc4 bt2 bt3 bt4 pw tw xw |w w fast normal w w %s: With --format=raw, --suffix=.SUF is required unless writing to stdout %s: Filename has an unknown suffix, skipping %s: File already has `%s' suffix, skipping %s: Invalid filename suffix .xz .txz .tar .lzma .tlz y @x y y y @x y y y y y y %s max %s: Value is not a non-negative decimal integer i iB B %s: Invalid multiplier suffix Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30). Value of the option `%s' must be in the range [%llu, %llu] %'u %'llu %llu %u %'.1f %.1f %s (%'llu B) (%llu B) Empty filename, skipping Compressed data cannot be read from a terminal Compressed data cannot be written to a terminal B KiB MiB GiB TiB ?@ @3333 @/dev/null Unknown error Writing to standard output failed %s: %s: %s Streams: Blocks: Compressed size: Uncompressed size: Ratio: Check: Stream Padding: Memory needed: Sizes in headers: Number of files: Stream Block Blocks CompOffset UncompOffset CompSize UncompSize TotalSize Ratio Check CheckVal Padding Header Flags MemUsage Filters None CRC32 Unknown-2 Unknown-3 CRC64 Unknown-5 Unknown-6 Unknown-7 Unknown-8 Unknown-9 SHA-256 Unknown-11 Unknown-12 Unknown-13 Unknown-14 Unknown-15 beta alpha %u.%u.%u%s %s: File is empty %s: Too small to be a valid .xz file %s: %s %08x %016llx %02x --- %.3f , , %s%s Strms Blocks Compressed Uncompressed Ratio Check Filename %*s %*s %*s %*s %*s %-*s %s %-*s %s %s %*s %*s %*s %*s %*s %*s %*s %-*s %*s %*s %*s %*s %*s %*s %*s %*s %-*s %*s %s %*s %*s %*s %*s %*s %*s %*s %-*s %-*s %*s %-*s %*s %*s %s %*s %*s %*s %-*s %-*s %*s %-*s %*s %*s MiB %s %-*s %s MiB Yes No Minimum XZ Utils version: %s name %s file %llu %llu %llu %llu %s %s %llu stream %llu %llu %llu %llu %llu %llu %s %s %llu block %llu %llu %llu %llu %llu %llu %llu %s %s %s %u %s %llu %llu %s yes no summary %llu %s %u %5s %7s %11s %11s %5s %-7s %s files %s file Totals: totals %llu %llu %llu %llu %s %s %llu %llu %llu %s %u --list works only on .xz files (--format=xz or --format=auto) --list does not support reading from standard input ?@ sh | #@
PQ , { { { { { { { { | | %| ,| 2| 9| D| Q| Z| e| o| u| {| | | | | |
GCC: (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
.symtab .strtab .shstrtab .interp .note.ABI-tag .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rel.dyn .rel.plt .init .plt.got .text .fini .rodata .eh_frame_hdr .eh_frame .init_array .fini_array .jcr .dynamic .got.plt .data .bss .comment
crtstuff.c __JCR_LIST__ deregister_tm_clones __do_global_dtors_aux completed.7209 __do_global_dtors_aux_fini_array_entry frame_dummy __frame_dummy_init_array_entry args.c parse_memlimit parse_block_list parse_real types.6011 types.6020 long_opts.5964 short_opts.5963 parse_environment names_stdin.6061 coder.c filters in_buf out_buf filters_count preset_number check_default mt_options forget_filter_chain memlimit_too_small opt_lzma.5819 is_format_xz magic.5848 is_format_lzma coder_init split_block coder_normal coder_passthru file_io.c warn_fchown try_sparse restore_stdin_flags restore_stdout_flags io_wait io_unlink io_copy_attrs io_open_src_real pair.5974 io_close_src io_open_dest_real io_close_dest io_write_buf is_sparse hardware.c threads_max memlimit_compress memlimit_decompress total_ram main.c read_name name.5892 size.5893 message.c files_pos files_total verbosity first_filename_printed current_filename_printed progress_automatic progress_started progress_active progress_strm progress_is_from_passthru expected_in_size progress_needs_updating progress_signal_handler print_filename progress_percentage buf.5828 progress_sizes buf.5834 progress_speed unit.5843 buf.5849 progress_time buf.5853 progress_remaining buf.5862 progress_pos progress_flush vmessage uint32_to_optstr buf.5945 bcj_names.5977 mytime.c next_flush mytime_now clk_id.5782 options.c parse_options set_delta opts.5824 set_bcj opts.5841 error_lzma_preset set_lzma opts.5880 modes.5878 mfs.5879 signals.c mythread_sigmask exit_signal hooked_signals signals_are_initialized signals_block_count sigs.5786 suffix.c custom_suffix is_dir_sep has_dir_sep test_suffix uncompressed_name suffixes.5795 msg_suffix all_suffixes.5812 util.c bufs thousand check_thousand_sep suffix.5830 tuklib_open_stdxxx.c tuklib_progname.c tuklib_exit.c tuklib_mbstr_width.c tuklib_mbstr_fw.c list.c colon_strs_fw init_colon_strs init_headings init_field_widths xz_ver_to_str buf.5975 parse_indexes parse_block_header parse_check_value parse_details get_ratio buf.6053 get_check_names print_info_basic headings_displayed.6071 print_adv_helper print_info_adv print_info_robot update_totals print_totals_basic print_totals_adv print_totals_robot __FRAME_END__ __JCR_END__ __init_array_end _DYNAMIC __init_array_start __GNU_EH_FRAME_HDR _GLOBAL_OFFSET_TABLE_ __libc_csu_fini lzma_index_iter_next@@XZ_5.0 suffix_set raise@@GLIBC_2.0 strstr@@GLIBC_2.0 lzma_index_iter_init@@XZ_5.0 lzma_index_stream_count@@XZ_5.0 strcmp@@GLIBC_2.0 io_fix_src_pos io_no_sparse read@@GLIBC_2.0 _ITM_deregisterTMCloneTable __x86.get_pc_thunk.bx lzma_code@@XZ_5.0 opt_block_list io_close hardware_threads_get stderr@@GLIBC_2.0 message_mem_needed message_filters_show opt_robot wcwidth@@GLIBC_2.0 user_abort free@@GLIBC_2.0 message_verbosity_get lzma_block_compressed_size@@XZ_5.0 memcpy@@GLIBC_2.0 mbsinit@@GLIBC_2.0 clock_gettime@@GLIBC_2.17 io_write message_verbosity_decrease ferror@@GLIBC_2.0 message_init message_progress_update flush_needed _edata fclose@@GLIBC_2.1 lzma_index_iter_rewind@@XZ_5.0 signals_exit memcmp@@GLIBC_2.0 lzma_stream_encoder_mt_memusage@@XZ_5.2 message_bug __umoddi3 args_parse message_progress_start __progname_full@@GLIBC_2.0 lzma_version_number@@XZ_5.0 options_bcj lzma_index_file_size@@XZ_5.0 optind@@GLIBC_2.0 alarm@@GLIBC_2.0 hardware_memlimit_get message_progress_end opt_block_size __stack_chk_fail@@GLIBC_2.4 signals_block io_init lzma_memusage@@XZ_5.0 fstat64 geteuid@@GLIBC_2.0 unlink@@GLIBC_2.0 opt_ignore_check xrealloc message_filename lzma_raw_encoder@@XZ_5.0 list_file tuklib_mbstr_fw io_open_dest signals_unblock opt_single_stream fopen64@@GLIBC_2.1 __udivdi3 mytime_get_elapsed poll@@GLIBC_2.0 opt_keep_original opt_flush_timeout is_empty_filename __fxstat64@@GLIBC_2.2 xstrdup tuklib_open_stdxxx lzma_get_progress@@XZ_5.2 lzma_check_size@@XZ_5.0 pthread_sigmask@@GLIBC_2.0 lseek64@@GLIBC_2.2 tuklib_exit hardware_init mbrtowc@@GLIBC_2.0 lzma_raw_decoder_memusage@@XZ_5.0 io_seek_src suffix_get_dest_name getenv@@GLIBC_2.0 realloc@@GLIBC_2.0 coder_set_preset __data_start opt_force uint64_to_nicestr opt_stdout strerror@@GLIBC_2.0 mytime_set_flush_time options_delta lzma_version_string@@XZ_5.0 __gmon_start__ message_set_files exit@@GLIBC_2.0 __dso_handle lzma_properties_decode@@XZ_5.0 gettext@@GLIBC_2.0 _IO_stdin_used message_error feof@@GLIBC_2.0 getopt_long@@GLIBC_2.0 lzma_file_info_decoder@@XZ_5.3.1alpha stdin_filename strchr@@GLIBC_2.0 lzma_index_end@@XZ_5.0 strlen@@GLIBC_2.0 hardware_memlimit_show fchown@@GLIBC_2.0 __libc_start_main@@GLIBC_2.0 lzma_stream_decoder@@XZ_5.0 lzma_block_header_decode@@XZ_5.0 write@@GLIBC_2.0 lzma_alone_decoder@@XZ_5.0 lstat64 open64@@GLIBC_2.2 lzma_end@@XZ_5.0 message_verbosity_increase signals_init __libc_csu_init stdin@@GLIBC_2.0 fcntl@@GLIBC_2.0 message_strm sigaddset@@GLIBC_2.0 coder_add_filter hardware_memlimit_set sigfillset@@GLIBC_2.0 memset@@GLIBC_2.0 putchar@@GLIBC_2.0 __errno_location@@GLIBC_2.0 coder_set_check message_fatal _fp_hw list_totals fgetc@@GLIBC_2.0 coder_set_compression_settings opt_auto_adjust mytime_get_flush_timeout mytime_set_start_time pipe@@GLIBC_2.0 stdout@@GLIBC_2.0 lzma_raw_decoder@@XZ_5.0 __bss_start is_tty_stdin main io_pread lzma_stream_encoder_mt@@XZ_5.2 set_exit_no_warn lzma_alone_encoder@@XZ_5.0 io_open_src sigemptyset@@GLIBC_2.0 program_invocation_name@@GLIBC_2.0 vfprintf@@GLIBC_2.0 setlocale@@GLIBC_2.0 strrchr@@GLIBC_2.0 io_write_to_user_abort_pipe options_lzma fputc@@GLIBC_2.0 lzma_cputhreads@@XZ_5.2 message_help _Jv_RegisterClasses lzma_index_checks@@XZ_5.0 futimens@@GLIBC_2.6 lzma_physmem@@XZ_5.0 lzma_index_uncompressed_size@@XZ_5.0 vsnprintf@@GLIBC_2.0 message_signal_handler io_read message_version set_exit_status coder_run round_up_to_mib tuklib_progname_init str_to_uint64 __TMC_END__ my_snprintf message_progress_sigs lzma_check_is_supported@@XZ_5.0 sigaction@@GLIBC_2.0 lzma_stream_encoder@@XZ_5.0 bindtextdomain@@GLIBC_2.0 _ITM_registerTMCloneTable posix_fadvise64@@GLIBC_2.3.3 isatty@@GLIBC_2.0 __xstat64@@GLIBC_2.2 optarg@@GLIBC_2.0 message_filters_to_str lzma_lzma_preset@@XZ_5.0 message_try_help fputs@@GLIBC_2.0 lzma_raw_encoder_memusage@@XZ_5.0 __lxstat64@@GLIBC_2.2 message_warning ngettext@@GLIBC_2.2 lzma_index_block_count@@XZ_5.0 close@@GLIBC_2.0 is_tty_stdout opt_format coder_set_extreme __ctype_b_loc@@GLIBC_2.3 tuklib_mbstr_width hardware_threads_set uint64_to_str opt_mode fchmod@@GLIBC_2.0