1 /*
2 * Copyright (c) 2015-2022, ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #include <assert.h>
8 #include <inttypes.h>
9 #include <stdbool.h>
10 #include <stdint.h>
11
12 #include <platform_def.h>
13
14 #include <arch_helpers.h>
15 #include <common/bl_common.h>
16 #include <common/debug.h>
17 #include <context.h>
18 #include <drivers/arm/cci.h>
19 #include <drivers/console.h>
20 #include <lib/el3_runtime/context_mgmt.h>
21 #include <lib/mmio.h>
22 #include <lib/xlat_tables/xlat_tables_v2.h>
23 #include <plat/common/platform.h>
24
25 #include <imx8qx_pads.h>
26 #include <imx8_iomux.h>
27 #include <imx8_lpuart.h>
28 #include <plat_imx8.h>
29 #include <sci/sci.h>
30 #include <sec_rsrc.h>
31
32 static const unsigned long BL31_COHERENT_RAM_START = BL_COHERENT_RAM_BASE;
33 static const unsigned long BL31_COHERENT_RAM_END = BL_COHERENT_RAM_END;
34 static const unsigned long BL31_RO_START = BL_CODE_BASE;
35 static const unsigned long BL31_RO_END = BL_CODE_END;
36 static const unsigned long BL31_RW_END = BL_END;
37
38 IMPORT_SYM(unsigned long, __RW_START__, BL31_RW_START);
39
40 static entry_point_info_t bl32_image_ep_info;
41 static entry_point_info_t bl33_image_ep_info;
42
43 /* Default configuration for i.MX8QM/QXP MEK */
44 #if defined(IMX_USE_UART0)
45 #define UART_PAD_CTRL (PADRING_IFMUX_EN_MASK | PADRING_GP_EN_MASK | \
46 (SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
47 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
48 (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \
49 (SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT))
50 #define IMX_RES_UART SC_R_UART_0
51 #define IMX_PAD_UART_RX SC_P_UART0_RX
52 #define IMX_PAD_UART_TX SC_P_UART0_TX
53
54 /*
55 * On Toradex Colibri i.MX8QXP UART3 on the FLEXCAN2.
56 * Use custom pad control for this
57 */
58 #elif defined(IMX_USE_UART3)
59 /*
60 * FLEXCAN2_RX/TX pads are muxed to ADMA_UART3_RX/TX,
61 * For ref:
62 * 000b - ADMA_FLEXCAN2_RX
63 * 001b - ADMA_SAI3_RXD
64 * 010b - ADMA_UART3_RX
65 * 011b - ADMA_SAI1_RXFS
66 * 100b - LSIO_GPIO1_IO19
67 */
68 #define UART_PAD_CTRL (PADRING_IFMUX_EN_MASK | PADRING_GP_EN_MASK | \
69 (SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
70 (2U << PADRING_IFMUX_SHIFT) | \
71 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
72 (SC_PAD_28FDSOI_DSE_DV_LOW << PADRING_DSE_SHIFT) | \
73 (SC_PAD_28FDSOI_PS_PD << PADRING_PULL_SHIFT))
74 #define IMX_RES_UART SC_R_UART_3
75 #define IMX_PAD_UART_RX SC_P_FLEXCAN2_RX
76 #define IMX_PAD_UART_TX SC_P_FLEXCAN2_TX
77 #else
78 #error "Provide proper UART configuration in IMX_DEBUG_UART"
79 #endif
80
81 static const mmap_region_t imx_mmap[] = {
82 MAP_REGION_FLAT(IMX_REG_BASE, IMX_REG_SIZE, MT_DEVICE | MT_RW),
83 {0}
84 };
85
get_spsr_for_bl33_entry(void)86 static uint32_t get_spsr_for_bl33_entry(void)
87 {
88 unsigned long el_status;
89 unsigned long mode;
90 uint32_t spsr;
91
92 /* figure out what mode we enter the non-secure world */
93 el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
94 el_status &= ID_AA64PFR0_ELX_MASK;
95
96 mode = (el_status) ? MODE_EL2 : MODE_EL1;
97
98 spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
99 return spsr;
100 }
101
102 #if DEBUG_CONSOLE_A35
lpuart32_serial_setbrg(unsigned int base,int baudrate)103 static void lpuart32_serial_setbrg(unsigned int base, int baudrate)
104 {
105 unsigned int sbr, osr, baud_diff, tmp_osr, tmp_sbr;
106 unsigned int diff1, diff2, tmp, rate;
107
108 if (baudrate == 0)
109 panic();
110
111 sc_pm_get_clock_rate(ipc_handle, IMX_RES_UART, 2, &rate);
112
113 baud_diff = baudrate;
114 osr = 0;
115 sbr = 0;
116 for (tmp_osr = 4; tmp_osr <= 32; tmp_osr++) {
117 tmp_sbr = (rate / (baudrate * tmp_osr));
118 if (tmp_sbr == 0)
119 tmp_sbr = 1;
120
121 /* calculate difference in actual baud w/ current values */
122 diff1 = rate / (tmp_osr * tmp_sbr) - baudrate;
123 diff2 = rate / (tmp_osr * (tmp_sbr + 1));
124
125 /* select best values between sbr and sbr+1 */
126 if (diff1 > (baudrate - diff2)) {
127 diff1 = baudrate - diff2;
128 tmp_sbr++;
129 }
130
131 if (diff1 <= baud_diff) {
132 baud_diff = diff1;
133 osr = tmp_osr;
134 sbr = tmp_sbr;
135 }
136 }
137
138 tmp = mmio_read_32(IMX_BOOT_UART_BASE + BAUD);
139
140 if ((osr > 3) && (osr < 8))
141 tmp |= LPUART_BAUD_BOTHEDGE_MASK;
142
143 tmp &= ~LPUART_BAUD_OSR_MASK;
144 tmp |= LPUART_BAUD_OSR(osr - 1);
145 tmp &= ~LPUART_BAUD_SBR_MASK;
146 tmp |= LPUART_BAUD_SBR(sbr);
147
148 /* explicitly disable 10 bit mode & set 1 stop bit */
149 tmp &= ~(LPUART_BAUD_M10_MASK | LPUART_BAUD_SBNS_MASK);
150
151 mmio_write_32(IMX_BOOT_UART_BASE + BAUD, tmp);
152 }
153
lpuart32_serial_init(unsigned int base)154 static int lpuart32_serial_init(unsigned int base)
155 {
156 unsigned int tmp;
157
158 /* disable TX & RX before enabling clocks */
159 tmp = mmio_read_32(IMX_BOOT_UART_BASE + CTRL);
160 tmp &= ~(CTRL_TE | CTRL_RE);
161 mmio_write_32(IMX_BOOT_UART_BASE + CTRL, tmp);
162
163 mmio_write_32(IMX_BOOT_UART_BASE + MODIR, 0);
164 mmio_write_32(IMX_BOOT_UART_BASE + FIFO, ~(FIFO_TXFE | FIFO_RXFE));
165
166 mmio_write_32(IMX_BOOT_UART_BASE + MATCH, 0);
167
168 /* provide data bits, parity, stop bit, etc */
169 lpuart32_serial_setbrg(base, IMX_BOOT_UART_BAUDRATE);
170
171 /* eight data bits no parity bit */
172 tmp = mmio_read_32(IMX_BOOT_UART_BASE + CTRL);
173 tmp &= ~(LPUART_CTRL_PE_MASK | LPUART_CTRL_PT_MASK | LPUART_CTRL_M_MASK);
174 mmio_write_32(IMX_BOOT_UART_BASE + CTRL, tmp);
175
176 mmio_write_32(IMX_BOOT_UART_BASE + CTRL, CTRL_RE | CTRL_TE);
177
178 mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x55);
179 mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x55);
180 mmio_write_32(IMX_BOOT_UART_BASE + DATA, 0x0A);
181
182 return 0;
183 }
184 #endif
185
imx8_partition_resources(void)186 void imx8_partition_resources(void)
187 {
188 sc_rm_pt_t secure_part, os_part;
189 sc_rm_mr_t mr, mr_record = 64;
190 sc_faddr_t start, end;
191 sc_err_t err;
192 bool owned;
193 int i;
194
195 err = sc_rm_get_partition(ipc_handle, &secure_part);
196 if (err)
197 ERROR("sc_rm_get_partition failed: %u\n", err);
198
199 err = sc_rm_partition_alloc(ipc_handle, &os_part, false, false,
200 false, false, false);
201 if (err)
202 ERROR("sc_rm_partition_alloc failed: %u\n", err);
203
204 err = sc_rm_set_parent(ipc_handle, os_part, secure_part);
205 if (err)
206 ERROR("sc_rm_set_parent: %u\n", err);
207
208 /* set secure resources to NOT-movable */
209 for (i = 0; i < (ARRAY_SIZE(secure_rsrcs)); i++) {
210 err = sc_rm_set_resource_movable(ipc_handle,
211 secure_rsrcs[i], secure_rsrcs[i], false);
212 if (err)
213 ERROR("sc_rm_set_resource_movable: rsrc %u, ret %u\n",
214 secure_rsrcs[i], err);
215 }
216
217 /* move all movable resources and pins to non-secure partition */
218 err = sc_rm_move_all(ipc_handle, secure_part, os_part, true, true);
219 if (err)
220 ERROR("sc_rm_move_all: %u\n", err);
221
222 /* iterate through peripherals to give NS OS part access */
223 for (i = 0; i < ARRAY_SIZE(ns_access_allowed); i++) {
224 err = sc_rm_set_peripheral_permissions(ipc_handle,
225 ns_access_allowed[i], os_part, SC_RM_PERM_FULL);
226 if (err)
227 ERROR("sc_rm_set_peripheral_permissions: rsrc %u, \
228 ret %u\n", ns_access_allowed[i], err);
229 }
230
231 /*
232 * sc_rm_set_peripheral_permissions
233 * sc_rm_set_memreg_permissions
234 * sc_rm_set_pin_movable
235 */
236 for (mr = 0; mr < 64; mr++) {
237 owned = sc_rm_is_memreg_owned(ipc_handle, mr);
238 if (owned) {
239 err = sc_rm_get_memreg_info(ipc_handle, mr, &start, &end);
240 if (err)
241 ERROR("Memreg get info failed, %u\n", mr);
242
243 NOTICE("Memreg %u 0x%" PRIx64 " -- 0x%" PRIx64 "\n", mr, start, end);
244 if (BL31_BASE >= start && (BL31_LIMIT - 1) <= end) {
245 mr_record = mr; /* Record the mr for ATF running */
246 } else {
247 err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
248 if (err)
249 ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 ", \
250 err %d\n", start, end, err);
251 }
252 }
253 }
254
255 if (mr_record != 64) {
256 err = sc_rm_get_memreg_info(ipc_handle, mr_record, &start, &end);
257 if (err)
258 ERROR("Memreg get info failed, %u\n", mr_record);
259 if ((BL31_LIMIT - 1) < end) {
260 err = sc_rm_memreg_alloc(ipc_handle, &mr, BL31_LIMIT, end);
261 if (err)
262 ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
263 (sc_faddr_t)BL31_LIMIT, end);
264 err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
265 if (err)
266 ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
267 (sc_faddr_t)BL31_LIMIT, end);
268 }
269
270 if (start < (BL31_BASE - 1)) {
271 err = sc_rm_memreg_alloc(ipc_handle, &mr, start, BL31_BASE - 1);
272 if (err)
273 ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
274 start, (sc_faddr_t)BL31_BASE - 1);
275 err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
276 if (err)
277 ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
278 start, (sc_faddr_t)BL31_BASE - 1);
279 }
280 }
281
282 if (err)
283 NOTICE("Partitioning Failed\n");
284 else
285 NOTICE("Non-secure Partitioning Succeeded\n");
286 }
287
bl31_early_platform_setup2(u_register_t arg0,u_register_t arg1,u_register_t arg2,u_register_t arg3)288 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
289 u_register_t arg2, u_register_t arg3)
290 {
291 #if DEBUG_CONSOLE
292 static console_t console;
293 #endif
294 if (sc_ipc_open(&ipc_handle, SC_IPC_BASE) != SC_ERR_NONE)
295 panic();
296
297 #if DEBUG_CONSOLE_A35
298 sc_pm_set_resource_power_mode(ipc_handle, IMX_RES_UART,
299 SC_PM_PW_MODE_ON);
300 sc_pm_clock_rate_t rate = 80000000;
301 sc_pm_set_clock_rate(ipc_handle, IMX_RES_UART, 2, &rate);
302 sc_pm_clock_enable(ipc_handle, IMX_RES_UART, 2, true, false);
303
304 /* Configure UART pads */
305 sc_pad_set(ipc_handle, IMX_PAD_UART_RX, UART_PAD_CTRL);
306 sc_pad_set(ipc_handle, IMX_PAD_UART_TX, UART_PAD_CTRL);
307 lpuart32_serial_init(IMX_BOOT_UART_BASE);
308 #endif
309
310 #if DEBUG_CONSOLE
311 console_lpuart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
312 IMX_CONSOLE_BAUDRATE, &console);
313 #endif
314 /* Turn on MU1 for non-secure OS/Hypervisor */
315 sc_pm_set_resource_power_mode(ipc_handle, SC_R_MU_1A, SC_PM_PW_MODE_ON);
316
317 /* Turn on GPT_0's power & clock for non-secure OS/Hypervisor */
318 sc_pm_set_resource_power_mode(ipc_handle, SC_R_GPT_0, SC_PM_PW_MODE_ON);
319 sc_pm_clock_enable(ipc_handle, SC_R_GPT_0, SC_PM_CLK_PER, true, 0);
320 mmio_write_32(IMX_GPT0_LPCG_BASE, mmio_read_32(IMX_GPT0_LPCG_BASE) | (1 << 25));
321
322 /*
323 * create new partition for non-secure OS/Hypervisor
324 * uses global structs defined in sec_rsrc.h
325 */
326 imx8_partition_resources();
327
328 bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
329 bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
330 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
331 }
332
bl31_plat_arch_setup(void)333 void bl31_plat_arch_setup(void)
334 {
335 unsigned long ro_start = BL31_RO_START;
336 unsigned long ro_size = BL31_RO_END - BL31_RO_START;
337 unsigned long rw_start = BL31_RW_START;
338 unsigned long rw_size = BL31_RW_END - BL31_RW_START;
339 #if USE_COHERENT_MEM
340 unsigned long coh_start = BL31_COHERENT_RAM_START;
341 unsigned long coh_size = BL31_COHERENT_RAM_END - BL31_COHERENT_RAM_START;
342 #endif
343
344 mmap_add_region(ro_start, ro_start, ro_size,
345 MT_RO | MT_MEMORY | MT_SECURE);
346 mmap_add_region(rw_start, rw_start, rw_size,
347 MT_RW | MT_MEMORY | MT_SECURE);
348 mmap_add(imx_mmap);
349
350 #if USE_COHERENT_MEM
351 mmap_add_region(coh_start, coh_start, coh_size,
352 MT_DEVICE | MT_RW | MT_SECURE);
353 #endif
354
355 init_xlat_tables();
356 enable_mmu_el3(0);
357 }
358
bl31_platform_setup(void)359 void bl31_platform_setup(void)
360 {
361 plat_gic_driver_init();
362 plat_gic_init();
363 }
364
bl31_plat_get_next_image_ep_info(unsigned int type)365 entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
366 {
367 if (type == NON_SECURE)
368 return &bl33_image_ep_info;
369 if (type == SECURE)
370 return &bl32_image_ep_info;
371
372 return NULL;
373 }
374
plat_get_syscnt_freq2(void)375 unsigned int plat_get_syscnt_freq2(void)
376 {
377 return COUNTER_FREQUENCY;
378 }
379
bl31_plat_runtime_setup(void)380 void bl31_plat_runtime_setup(void)
381 {
382 return;
383 }
384