1 What:		/sys/bus/hid/drivers/logitech/<dev>/range
2 Date:		July 2011
3 KernelVersion:	3.2
4 Contact:	Michal Malý <madcatxster@devoid-pointer.net>
5 Description:	Display minimum, maximum and current range of the steering
6 		wheel. Writing a value within min and max boundaries sets the
7 		range of the wheel.
8 
9 What:		/sys/bus/hid/drivers/logitech/<dev>/alternate_modes
10 Date:		Feb 2015
11 KernelVersion:	4.1
12 Contact:	Michal Malý <madcatxster@devoid-pointer.net>
13 Description:	Displays a set of alternate modes supported by a wheel. Each
14 		mode is listed as follows:
15 
16 		  Tag: Mode Name
17 
18 		Currently active mode is marked with an asterisk. List also
19 		contains an abstract item "native" which always denotes the
20 		native mode of the wheel. Echoing the mode tag switches the
21 		wheel into the corresponding mode. Depending on the exact model
22 		of the wheel not all listed modes might always be selectable.
23 		If a wheel cannot be switched into the desired mode, -EINVAL
24 		is returned accompanied with an explanatory message in the
25 		kernel log.
26 		This entry is not created for devices that have only one mode.
27 
28 		Currently supported mode switches:
29 
30 		Driving Force Pro::
31 
32 		  DF-EX --> DFP
33 
34 		G25::
35 
36 		  DF-EX --> DFP --> G25
37 
38 		G27::
39 
40 		  DF-EX <*> DFP <-> G25 <-> G27
41 		  DF-EX <*--------> G25 <-> G27
42 		  DF-EX <*----------------> G27
43 
44 		G29::
45 
46 		  DF-EX <*> DFP <-> G25 <-> G27 <-> G29
47 		  DF-EX <*--------> G25 <-> G27 <-> G29
48 		  DF-EX <*----------------> G27 <-> G29
49 		  DF-EX <*------------------------> G29
50 
51 		DFGT::
52 
53 		  DF-EX <*> DFP <-> DFGT
54 		  DF-EX <*--------> DFGT
55 
56 		* hid_logitech module must be loaded with lg4ff_no_autoswitch=1
57 		  parameter set in order for the switch to DF-EX mode to work.
58 
59 What:		/sys/bus/hid/drivers/logitech/<dev>/real_id
60 Date:		Feb 2015
61 KernelVersion:	4.1
62 Contact:	Michal Malý <madcatxster@devoid-pointer.net>
63 Description:	Displays the real model of the wheel regardless of any
64 		alternate mode the wheel might be switched to.
65 		It is a read-only value.
66 		This entry is not created for devices that have only one mode.
67 
68 What:		/sys/bus/hid/drivers/logitech/<dev>/combine_pedals
69 Date:		Sep 2016
70 KernelVersion:	4.9
71 Contact:	Simon Wood <simon@mungewell.org>
72 Description:	Controls whether a combined value of accelerator and brake is
73 		reported on the Y axis of the controller. Useful for older games
74 		which can do not work with separate accelerator/brake axis.
75 		Off ('0') by default, enabled by setting '1'.
76