1============================
2Kernel-provided User Helpers
3============================
4
5These are segment of kernel provided user code reachable from user space
6at a fixed address in kernel memory.  This is used to provide user space
7with some operations which require kernel help because of unimplemented
8native feature and/or instructions in many ARM CPUs. The idea is for this
9code to be executed directly in user mode for best efficiency but which is
10too intimate with the kernel counter part to be left to user libraries.
11In fact this code might even differ from one CPU to another depending on
12the available instruction set, or whether it is a SMP systems. In other
13words, the kernel reserves the right to change this code as needed without
14warning. Only the entry points and their results as documented here are
15guaranteed to be stable.
16
17This is different from (but doesn't preclude) a full blown VDSO
18implementation, however a VDSO would prevent some assembly tricks with
19constants that allows for efficient branching to those code segments. And
20since those code segments only use a few cycles before returning to user
21code, the overhead of a VDSO indirect far call would add a measurable
22overhead to such minimalistic operations.
23
24User space is expected to bypass those helpers and implement those things
25inline (either in the code emitted directly by the compiler, or part of
26the implementation of a library call) when optimizing for a recent enough
27processor that has the necessary native support, but only if resulting
28binaries are already to be incompatible with earlier ARM processors due to
29usage of similar native instructions for other things.  In other words
30don't make binaries unable to run on earlier processors just for the sake
31of not using these kernel helpers if your compiled code is not going to
32use new instructions for other purpose.
33
34New helpers may be added over time, so an older kernel may be missing some
35helpers present in a newer kernel.  For this reason, programs must check
36the value of __kuser_helper_version (see below) before assuming that it is
37safe to call any particular helper.  This check should ideally be
38performed only once at process startup time, and execution aborted early
39if the required helpers are not provided by the kernel version that
40process is running on.
41
42kuser_helper_version
43--------------------
44
45Location:	0xffff0ffc
46
47Reference declaration::
48
49  extern int32_t __kuser_helper_version;
50
51Definition:
52
53  This field contains the number of helpers being implemented by the
54  running kernel.  User space may read this to determine the availability
55  of a particular helper.
56
57Usage example::
58
59  #define __kuser_helper_version (*(int32_t *)0xffff0ffc)
60
61  void check_kuser_version(void)
62  {
63	if (__kuser_helper_version < 2) {
64		fprintf(stderr, "can't do atomic operations, kernel too old\n");
65		abort();
66	}
67  }
68
69Notes:
70
71  User space may assume that the value of this field never changes
72  during the lifetime of any single process.  This means that this
73  field can be read once during the initialisation of a library or
74  startup phase of a program.
75
76kuser_get_tls
77-------------
78
79Location:	0xffff0fe0
80
81Reference prototype::
82
83  void * __kuser_get_tls(void);
84
85Input:
86
87  lr = return address
88
89Output:
90
91  r0 = TLS value
92
93Clobbered registers:
94
95  none
96
97Definition:
98
99  Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
100
101Usage example::
102
103  typedef void * (__kuser_get_tls_t)(void);
104  #define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
105
106  void foo()
107  {
108	void *tls = __kuser_get_tls();
109	printf("TLS = %p\n", tls);
110  }
111
112Notes:
113
114  - Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12).
115
116kuser_cmpxchg
117-------------
118
119Location:	0xffff0fc0
120
121Reference prototype::
122
123  int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
124
125Input:
126
127  r0 = oldval
128  r1 = newval
129  r2 = ptr
130  lr = return address
131
132Output:
133
134  r0 = success code (zero or non-zero)
135  C flag = set if r0 == 0, clear if r0 != 0
136
137Clobbered registers:
138
139  r3, ip, flags
140
141Definition:
142
143  Atomically store newval in `*ptr` only if `*ptr` is equal to oldval.
144  Return zero if `*ptr` was changed or non-zero if no exchange happened.
145  The C flag is also set if `*ptr` was changed to allow for assembly
146  optimization in the calling code.
147
148Usage example::
149
150  typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
151  #define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
152
153  int atomic_add(volatile int *ptr, int val)
154  {
155	int old, new;
156
157	do {
158		old = *ptr;
159		new = old + val;
160	} while(__kuser_cmpxchg(old, new, ptr));
161
162	return new;
163  }
164
165Notes:
166
167  - This routine already includes memory barriers as needed.
168
169  - Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12).
170
171kuser_memory_barrier
172--------------------
173
174Location:	0xffff0fa0
175
176Reference prototype::
177
178  void __kuser_memory_barrier(void);
179
180Input:
181
182  lr = return address
183
184Output:
185
186  none
187
188Clobbered registers:
189
190  none
191
192Definition:
193
194  Apply any needed memory barrier to preserve consistency with data modified
195  manually and __kuser_cmpxchg usage.
196
197Usage example::
198
199  typedef void (__kuser_dmb_t)(void);
200  #define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
201
202Notes:
203
204  - Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15).
205
206kuser_cmpxchg64
207---------------
208
209Location:	0xffff0f60
210
211Reference prototype::
212
213  int __kuser_cmpxchg64(const int64_t *oldval,
214                        const int64_t *newval,
215                        volatile int64_t *ptr);
216
217Input:
218
219  r0 = pointer to oldval
220  r1 = pointer to newval
221  r2 = pointer to target value
222  lr = return address
223
224Output:
225
226  r0 = success code (zero or non-zero)
227  C flag = set if r0 == 0, clear if r0 != 0
228
229Clobbered registers:
230
231  r3, lr, flags
232
233Definition:
234
235  Atomically store the 64-bit value pointed by `*newval` in `*ptr` only if `*ptr`
236  is equal to the 64-bit value pointed by `*oldval`.  Return zero if `*ptr` was
237  changed or non-zero if no exchange happened.
238
239  The C flag is also set if `*ptr` was changed to allow for assembly
240  optimization in the calling code.
241
242Usage example::
243
244  typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
245                                    const int64_t *newval,
246                                    volatile int64_t *ptr);
247  #define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
248
249  int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
250  {
251	int64_t old, new;
252
253	do {
254		old = *ptr;
255		new = old + val;
256	} while(__kuser_cmpxchg64(&old, &new, ptr));
257
258	return new;
259  }
260
261Notes:
262
263  - This routine already includes memory barriers as needed.
264
265  - Due to the length of this sequence, this spans 2 conventional kuser
266    "slots", therefore 0xffff0f80 is not used as a valid entry point.
267
268  - Valid only if __kuser_helper_version >= 5 (from kernel version 3.1).
269